Windows 8 boot screen

Similar Questions

• I want to change my windows 7 boot screen resualution.

  HY deuds! I want to change my windows 7 boot screen resualution. I have a moniter of 22 inches with 1920 x 1080. And the resualution of splash screen is 400 x... And I want to change to 1920 x 1080. Can someone help me?

  At the beginning of the start-up procedure, pilots of Windows screen do not run. The screen resolution is VGA base until drivers kick in...

• Change Windows 7 boot screen

  Change the Windows 7 boot screen?    Step by step... Please

  Not the logon screen... Thank you!!!

  There is a way.

  http://www.coderforlife.com/projects/win7boot/

  But it's for Advanced users. Don't forget to make a backup of all the system files you replace or change.

• Windows 7 boot screen Vista Green loading bar

  Please, if anyone knows where I can download the splash screen animated Windows 7 to a 1024 x 600 Please tell me. I ve installed Windows 7 last week and he show´s me vista´s bar not the logo loading animated Windows 7.

  Sorry, I misread your message.

  You must have a screen resolution of 1024 X 768 for the Windows 7 start screen.

  Anything produced less Vista type display.

  There is no download available.

• Dual Boot - how to reduce the startup time (guest) on the Windows 7 boot screen?

  Hello

  I have dual-boot Windows 7 + 8. My quick screen to choose between Windows 7 or 8 Starter is based.
  I wish I could reduce these 30 seconds of starting for the smallest possible number.
  How can I do?
  Thanks in advance
  Yannick

  Click Start, and then type: msconfig and press the Enter key

  Click the "Boot" tab and at the bottom right, you will see of 30 seconds by default, change the value to a lower number. Remember, you must be at least enough time to choose the version of Windows.

  Or Windows 8:

  Press Windows + X key and select "Run" then enter: msconfig and press ENTER.

  Then click on the tab "Boot".

  J W Stuart: http://www.pagestart.com

• Windows 8 boot screen tiles are focus

  I recently refreshed my laptop, remove all labels and Web sites applications.  Now when I scroll horizontally on the splash screen using the touchpad, the tiles are focus (put a white line around the tile) which makes the scrolling tiles too quickly.  When I scroll vertically on the start screen, the tiles not to focus.
  
  White line appears around the upper left pane when I start to scroll horizontally and focus tiles at the top of the screen.
  I'm on a Toshiba Satellite P855-S5200, I bought last year with Windows 7 pre-installed but I then installed Windows 8 with a disc. It doesn't have a touch screen, so I use my touchpad for all the shares of touch of Windows 8.
  This has never happened before and I've never disabled it during installation of Windows 8.  Is there a way to stop the tiles of focusing?

  Hello

  I suggest you try the troubleshooting Windows App tool mentioned in the following article and see if it helps you:
  http://www.kapilarya.com/download-Microsoft-accounts-Windows-apps-troubleshooters-to-fix-casual-issues-for-Windows-8
  Also try the SFC/scannow command administration command prompt. If is not help, then try on orders:
   http://www.kapilarya.com/fix-do-Inbox-Corruption-repair-using-DISM-in-Windows-8
  If nothing works, refresh Windows 8:
  http://www.kapilarya.com/how-to-refresh-Windows-8
  Hope something helps, good luck :)

• Windows 7 boot screen freezes. Virus... ?

  My Windows 7 PC has recently been infected by the virus 'Win 7 Internet Security' I have successfully removed the virus, so I decided to download Spyware Doctor, but my laptop has rebooted during the download process. I tried to download it again. Then my cell phone just closed. I tried to turn it on in SafeMode (so I could download the Spyware Doctor) but my laptop freeze (I'll give a link to what it looks like). I decided to just start my laptop regularly. It froze again (I have will also provide a link to the image) I tried to do a system recovery, when he asked if I wanted to start Windows normally or perform a system recovery, but he would not recover. I'm not able to go further than the frozen screens. I am currently using Splashtop of Sony, but I can't do this forever! I have some important documents to access my account.
  Help, please! I've only had my phone for about 5 months, and I have no idea what to do.
  Here are the links:
  http://forums.techguy.org/attachments/2... photo.jpg (This is when I try to open safe mode. Notice the colorful banner high pixel of the screen).
  http://forums.techguy.org/attachments/2... oto-1-.jpg (This is when I try to open Windows normally. He still has the banner colored on the top of the screen).

  Hello..

  Looks like a hardware problem after looking at these images.

  Have you recently installed memory modules RAM or upgrade of any other hardware in the computer... ??

  Press F10 for recovery options, and then try hardware diagnostics. If it detects a service will be required. Try to contact Sony support team for further information on any error so reported in hardware diagnostics.

  Try to start the computer with the "last known good configuration" option after pressing the F8 key.

  Check if these lines will appear in the screen of the BIOS also. Press the F2 key to the vaio splash screen for blue BIOS screen.

  This will allow to check if the problem is really related to the material.

  Hope it works...

  Wish you a happy new year!

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 10 boots and stuck on the black screen with high CPU

  Hello

  I have a MBP 15 "mid 2015 16G with AMD R9 M370X i7.

  I've been running bootcamp with Windows 10 installation for about a month now without any problems.  However, yesterday 10 Windows started and has been blocked in a black screen (before any screen logo or connection win) with the CPU works hard and hot.

  1. I tried to restart some time hold button / stop and start with the option key, key and then selecting the windows bootcamp partition but it drove the same black screen with CPU hot work in the background.

  2. I can always start OSX fine during this period.

  3. I tried to leave in the black screen for a good 10 minutes, but it does not change and the MBP gets really hot.

  4. I tried clearing NVRAM with Boot option + command + P + R

  5 I can't in Windows 10 safe mode using F8 or FN + F8 after you select windows to boot manager (starting with the down option).  Am I missing something here?

  I don't have a copy of Installer windows 10 with me right now unless someone can tell me how to create one under OSX.

  I searched on the internet forum and apple, but have not found a solution that works for me.  Many speak of win10 black screen with cursor showing, but my question is just a black screen with no cursor.

  Someone at - it other ideas besides reinstall Windows 10?

  You have a black screen with or without power adapter, both? If 10 Windows does not start correctly three times, it should bring up the recovery console. Windows automatic updates are enabled? You have created/activated Windows system restore points?

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• Windows Vista boot and goes directly to the F8 screen

  Windows Vista Boot and goes directly to the F8 screen, when you select an option it the computer goes black and never start. I do not install any program again, I worked with my online banking and the computer freezes I turn it off and restart and from there to show this problem. I test the computer with seetools to test the hard drive but when I hit to accept the test the keyboard won't obey my order; later I test with Hiren and I could make a mini feture call windows xp here I could see the C drive and all files on this too, I was able to open it. What you think about that happening could be the operating system or perhaps another problem?

  Hello

  Please follow the steps mentioned in the link below.

  What to do if Windows does not start successfully http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• HP w1907: implementation gets stuck to the 'HP invent' blue Boot Screen

  Hi all
  
  I have HP w1907 desktop... I use it since 2008.
  Last month I format to have the new windows 7 in it... Previously I was also working with win7 Ultimate.

  But it's keep restarting after the use of 4-5 minutes and so I installed the entire operating system yet.

  It worked very well... after 3-4 weeks, when I started it, it gets stuck at the 'HP invent' blue Boot Screen.

  This display has the instructions to enter the "Boot Menu", "Setup" and "System Recovery" by pressing key "F11" aor "Esc", "F10".  It is just there for ever.

  If I try to enter the 'Boot' Menu by pressing the 'Esc' key, I get the message "Loading Boot Menu... ", but then it hangs there forever just.  If I try to enter the "Setup" Menu, I get a similar result - it says 'enter the Setup... ". "and just hangs there.  By pressing the "F11" key does not seem to do anything.

  Any ideas on how to solve this problem?

  Searching the forums I tried to reset the BIOS - who I've got from here:

  http://h30434.www3.HP.com/T5/desktop-lockups-freezes-hangs/powering-up-gets-stuck-at-Blue-quot-HP-in...
  
  and
  
  http://support.HP.com/us-en/document/c01080282
  
  After doing this too, the result is null

  Please help me...

  I'm in a hurry...

  Thank you.

  Date and the incorrect time can certainly cause problems.  What happens usually, however, is that the sites Web will not be opened because the State in which the certificate is not up-to-date.  I have not heard of the time and date causing the computer does not start.  I think that you need to change the CMOS battery.  Here's a guide on how to change it.  The guide has also some good troubleshooting information.

  Once the battery has been replaced, we'll see what happens.

• Satellite C660 - 1ME - the missing BIOS boot screen

  I updated the BIOS on my Toshiba satellite C660 - 1ME to version 1.20 - WINNER of the Web from Toshiba site.
  After the missing BIOS boot screen, so that now my laptop starts directly with the Windows startup screen

  I tried pressing any key at startup, but nothing happened
  I tried to re - install the BIOS (old and even new version), but I got error that I have "identical or newer BIOS version..."

  can you help me please?

  > I tried pressing any key at startup, but nothing happened
  You mean F2, F8 or F12?

• HP M9000: Black screen after the "Starting Windows" logo and the windows on the screen

  I just gave me a m9040n HP Pavilion Elite with a Q6600 CPU, graphics card ge force and two 500 GB HARD drives in.

  When I starts it up it seems to be ok the HP blue screen will lights up at the start of the BONE and displays "starting Windows" on the screen with the windows logo. and then it goes to black with just the cursor on the screen. (Vista) So I know WHAT BIOS is ok, the graphics are windows allowed from.

  I went to the HP system F11 recovery and he seems to think that all is well... Very confused ideas?

  Thank you, Glenn...

  400workstation

  It looks like one or more of the boot loader files has been corrupted.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM of repair of Win7. This will repair the boot loader files, and if that is the problem, your PC will start OK after that.  Yes, it's for Win7, but Vista uses the same bootstrapper, so you can use Win7 to repair the Vista bootloader files.
  
  The file you need can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If it isn't, then some files of the operating system has also been corrupted and the only way to fix it would be to perform a system recovery - which if F11 does not work, but a recovery from the PC to its original using recovery media state.

  Problem there is that HP no longer wears a recovery media for the Vista PC, so you should check to see if these sites still have it: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Satellite P850/040 - Windows 7 black screen with the white mouse pointer

  I have a Satellite P850/040

  I tried to start and was taken to the "Windows Error Recovery" screen. I tried the options "Start Windows normally" and "(recommended) launch startup repair. None worked!

  In the "Advanced Boot Options", I tried in vain the following options:
  Repair your computer
  Safe mode
  Activate video low resolution
  Last known good Configuration (Advanced)
  Start Windows normally

  Foolishly, I did not run a backup of my files for 6 months & can't afford to lose some of them.

  Does anyone have any suggestions? Or should I send it to a Repair Service Toshiba (it is not available in the city where I live)? Thank you

  > Stupidly, I did not run a backup of my files for 6 months & can't afford to lose some of them.

  Two options:

  (* 1) * you would remove the laptop HARD drive and use an external USB 2.5 enclosure SATA to connect this HARD drive on another computer. In this case, you should be able to access the HARD disk and save the files.

  (* 2) * you would be to start Notepad using Live CD Linux Live CD or a Live CD of WindowsPE. Google this for more details.