Windows 8 change date unchanged

Similar Questions

• Explorer Windows in Windows 7 change suddenly last updated Date of the files attribute

  I'm moving from XP Pro to Win 7 of last month during this process, I came across a disturbing behavior in Windows Explorer in Windows 7.

  In Windows 7 (and I hear Vista as well) Windows Explorer will sometimes change the file Date changed when slide it / file to a new location.  I spent hours researching this issue.  In some discussions, some participants said it is a reasonable thing, since copying a folder with files creates a new folder and new files, so a new modified Date is guaranteed.  I can understand that as a basis to change the creation Date.  This was the behavior under XP and I think that NT as well.  However, changing the Date of change is a fundamental departure from how the system of files are featured in the past, and it is also a serious departure from good sense.  At the very least, it will make it impossible to find or organize files by date of update, since the original modification Date (date the actual content of the file may have been modified) is lost.  It also seriously decreases the possibility of finding files duplicated by this attribute when simply copy a file it modifies.

  Change the folder view options can prevent this behavior (Options: view folders: check always show icons, never thumbnails).  In addition, edit a file to read-only will also stop this change of Date of modification.  However, none of these options provide a viable solution to this problem.  All first, change the option to display file then prevents look a thumbnails of the image files.  Change once the copy of file causes the copied files to change Date change date created.  The same is true for the readonly attribute (removing it causes the modification Date change), not mention that it is often impractical to effectively apply this strategy.

  I also note that this behavior is not consistent in all areas.  Files copied from a shared disc on a PC network do not seem to this behavior.  But, files and folders transferred by using Dropbox (www.dropbox.com) show the unwanted behavior.  Worse still, the behaviour was not consistent within the folder.  I transferred a file with the 2007 via Dropbox eml files.  In most tests, once the folder has been moved and dropped on the Win 7 machine (whether copied or moved) the Date of editing files has been changed to take account of the date and time that they were dropped.  However, in one case, two of the files has not changed the Date of change.  By clicking on the file or even open it to read has not made a difference.  The modification Date remained unchanged.  I don't really know why this was the case in this instance, given that these same files has been modified Date change in previous experiences.

  Frankly, I'm puzzled and dismayed that this did not become a more important issue.  Do not have a lot of imagination to see how this problem might affect users old files of e-mail to archiving as LME and anyone copy older files, who later need to search or sort them by the Date of change.  There are solutions that I know, as the compression of the files before any copy or use Robocopy with the appropriate options, but they are much less practical as drag - drop.  Furthermore, drag and drop is now so embedded in users what their likely natural choice for file copy or move.  Once the modification Date is lost, it cannot be found without a restore of backup files - once again, an unrealistic option and a lot of time.

  I think it is a serious problem that needs to be processed quickly by Microsoft.  Good design keeps logical and mitigates the factors that can lead to human error.  The above behavior fails both these needs.  Anyone found a solution for this (maybe change registry) or to know if and when Microsoft plans to approach this?

  I've just dealt with the same problem when copying all the contents of my hard drive and found an impressive (and without :-)) Microsoft Utility called RichCopy which solves this problem and makes it much easier to copy a large number of files/folders :-))

  Here is a link to the article about this in Microsoft TechNet Magazine described the tool, which has a link to download it as well: http://technet.microsoft.com/en-us/magazine/2009.04.utilityspotlight.aspx

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• Windows will not update - "the location where updates WIndows stores the data changed.... »

  original title: windows will not update - please help

  I get the message "where Windows Update stores data has changed and should be repaired" How can I change this so that I can update my computer?

  How to reset the Windows Updates components?

  http://support.Microsoft.com/kb/971058>

  Download and Save the fix it 50202 from the page above.

  Close all the open browsers and programs prior to execution of the fix it.

  Since the downloads fail, when run you the fix it choose its default mode when you run it the first time.

  When he finished, check if download updates now.

  If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 19:07 Monday, December 26, 2011

• Problem running windows 10 to date for windows 7 Home premium 64-bit reference error code 08C 1800103 - 089002

  Problem running windows 10 to date for windows 7 Home premium 64-bit reference error code 08C 1800103 - 089002

  Could not update windows 7 Home premium service pack 1 for windows 10.

  I tried windows update. all updates are installed except win 10 update that comes up with unexpected error

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• How to fix error "firewall Windows cannot change some of your settings. 0x800745b error code.

  I have microsoft essential security installed on my laptop & I also downloaded & installed a trial version of avast antivirus.

  & I don't know what other changes on my laptop has been filed, that caused this error, when I'm clicking to turn on Windows Firewall, it invites you to use recommended settings & by clicking "Use recommended settings" it gives an error "firewall Windows cannot change your settings. Code error-0x800745b ".
  How to solve it?

  Follow the steps in the link and check if that helps.

  I suggest you follow the steps in the link below (with an emphasis on the method 3 and 4)

  http://support.Microsoft.com/kb/2530126>

  `~`

  The current time and the date now in Baja California, Mexico

  22:28
  Thursday, May 16, 2013
  DST - 0700 UTC
   
  UTC/GMT is 05:28 Friday, May 17, 2013
              
  Current weather conditions in San Felipe

  Sunny90 ° F / 32 ° C

• Updates to Windows 8 - "Configuration of the Windows updates, changes in restoration failure"

  Hello

  Recently I finally got my laptop back from repairs after 6 weeks. Now, it is in a 'clean' State (aka factory settins).

  I wanted to get to 8.1 Windows as soon as possible, but for this I need to be on the latest version of Windows 8.

  So I then try to run "Windows Update" and let it install all updates recommended. He manages to download all updates,

  and then he tries to configure these. About 98% or 99%, it gives the following message:

  'Configuration of the Windows updates, changes back failure'

  It then goes in an infinite loop constantly, he ran for hours and hours without having passed this screen.

  So far, the only solution is to reset it to factory settings, which brings me to the point before that I try to update, so it is not move me.

  I've tried so far, but no luck what follows:

  • http://support.Microsoft.com/kb/949358/en-us
  • http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/failure-configuring-Windows-updates-reverting/16219e5c-564b-4310-9f68-c9d595bb4cbe?page=1
  • http://support.Microsoft.com/kb/971058

  None of them has worked so far.

  To be clear:

  It is an OEM license. This doesn't mean no DISC, nor any ISO/Exe could work that they do not accept the product key.

  Many other people have the same problem.

  Please, I'm at a loss to date.

  Yours Sincerely,

  Leon

  Hi all

  Seems that I myself have found a potential workaround.

  Install only the KB2871389 allowed me to grab the download of Windows the Windows store 8.1.

  Then, I could install Windows 8.1 without a hitch and it normally seems using Windows Updater runs from there on.

  It is not yet a waterproof solution to water / final of 100%, but it seems to work for me.

  I hope this will help someone else with the same problem!

  Yours Sincerely,

  Leon

• Firewall Windows cannot change some of your settings. Error code 0 x 80070424

  I use 8 (64-bit) windows, try to turn on "Windows Firewall".

  Get this error "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  I tried to locate the "Windows Firewall" services in the service (in Services.msc) database, but this service is not listed. Help, please

  Thanks Robear,

  Today, I just made "Reset PC" to make it back to my factory setting (even if I lost all my data, but I've got to the top of it). Then, I used "Norton Removal Tool" to remove Norton who was there in orginal factory setting.

  Now, I tried to run "Windows Defender" & "Windows Firewall" both are running without any problem.

  Thank you much for the help.

  Vikas

• Cannot change data values

  I want to change data in a view that joins multiple tables
  
  Change value window appears but I can't change the value
  
  I looked on the columns tab and UPDATABLE column is set to NO for all fields
  
  I tried to set the MODIFIABLE Yes field by clicking on the selection button
  
  again, a window for editing the value comes back but I can't change the value
  
  Help, please
  
  Thanks in advance

  Right, your point of view is not editable, and so you cannot place the INSTEAD - OF trigger or the other. Because you are unable to update normally, you can do anything in the place or the other. Catch philosophy?
  So, your only options are to open the underlying tables, so you can change them through the data tab or write the INSERT/UPDATE statements yourself in a worksheet.

  Kind regards
  K.

  PS: For a view to be updated, you need to have a 1:1 relationship with the underlying tables, so the UPDATE statement inherits the same key. The database is not so smart to find another.

• The batch change date and time

  I have a lot of photos which, for some reason, have lost their correct dates and hours of creation, so I was eager to correct in an easy and enjoyable way.  I unfortunately discovered that Photos is not the batch option to change that used to be in iPhoto.

  When you try to find a solution to my problem, I fell on this batch Change Date and time on a fixed Date, which works well, but not quite how I want it.  What I want to do, that's exactly what the script above does, but rather than increment by 1 minute of each photo, I want to increment by 1 second intervals by photo.

  Having not really used AppleScript before, I tried to change the references to the 'minutes' to 'seconds' but that did not work.  Is it possible to do using above seconds instead of minutes?

  Any guidance would be greatly appreciated.  Thank you.

  Just delete the text "" * minutes ' in the lines where the date is changed. "

  Then time will be incremented seconds.

  For example, for the first version of the script use:

  the value timeIncrement to 1 - increment of time in seconds

  (* select at least 2 images in Photos *)

  say application 'Photos '.

  activate

  game imageSel for (get selection)

  if ({ is } imageSel) or (the length of imageSel < 2) then

  error "Please select at least two images."

  on the other

  defined first_image to the point 1 of the imageSel

  the value first_date to (the date of first_image) as date of

  Repeat with I from 2 to the County of imageSel

  put next_image to the point I of imageSel

  the value next_date to (the date of next_image) as date of

  the value time_difference to (first_date - next_date) + ((i-1) * timeIncrement)

  say next_image

  the value le Date of next_image to (next_date + time_difference) as date of

  end say

  end Repeat

  end if

  return "Set the date and time of" & (the length of the imageSel) & 'photos. The last date is "& ((the date of next_image) as date)"

  end say

  
  

• change date on photo

  the date on the camera was wrong when photographed I can change date right?

  See change the date and time a photo was taken

• Error: Windows cannot change the password when attempt to set a password to connect to the Windows XP computer.

  Original title: Windows cannot change the password.

  I'm trying to set a password on my computer with windows xp professional and everytime I try, I get a message saying: Windows cannot change the password. Please can someone help me.

  With our thanks

  Elizabeth

  Hi Elizabeth,.

  You can follow this link & check if the problem persists:

  Impossible to change the password for the administrator account in user accounts in Control Panel

  Hope the helps of information.

• Windows Boot Configuration data file is missing required information

  Hello

  I am trying to boot up my laptop and the Windows Boot Manager appears saying that Windows could not start.

  File: \boot\bcd

  Status 0xc000000d

  Info: The windows boot configuration data file is missing required information.

  I have a laptop Dell Inspiron notebook, which came with Windows 7 pre-installed so I didn't have an installation disc, nor do I have a CD player.  How can I solve this problem and is it simple?  I tried to turn on my new laptop and pressing F8 but nothing happens and the windows Boot Manager appears again.  Can someone help me please, or I'll have to return someone to solve this problem for me?

  Thank you

  Michael

  For questions of Windows7 you should repost in the Windows7 Forums: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be happy to help you.  It is a Forum of Vista so I wasn't expecting a question of Windows7.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 change automatically the compatibility on steam

  Hello

  I just had a strange error output of steam, in which Windows says it has detected problems of compatibility and changed automatically in response to this. There is no option to cancel the changes, and looking at the exe of steam, no compatibility setting have been changed.

  However, when I go to open steam now, it detects that it is in compatibility mode and does not open. Anyone has any idea how I would like to undo changes?

  I do not understand why Windows has changed the settings in the first place, as it has been working well since the RC is released.

  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/threads

  Link above is "Preparing for Windows 7" Forum.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Link above is Windows 7 Forum, to more technical questions about windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Firewall problem: "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  My firewall doesn't let me turn it on. McAfee says that my computer is in danger because my firewall is not on and tried to turn back on. It gives me an error code and says ' firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  Because you pay McAfee protection antimalware we assume that asked for the help of McAfee Support? http://service.McAfee.com/

  Try this: http://support.microsoft.com/mats/windows_firewall_diagnostic/