Similar Questions

• Change from Windows, from 32 to 64-bit system

  When I installed windows, I chose the 32-bit operating system. I have 4 GB of memory and I now want to add another memory to 4 GB for the system. I realize now that I need to change the 32-bit to a 64-bit for this operating system.

  How can I do this? Please help me.

  Can you please tell us what model of laptop do you have?

• Can't change screen brightness in Windows 7 Home Premium 32 bit?

  I recently updated my old A305 laptop Toshiba Satellite Windows Vista Home Premium 32 bit for Windows 7 Home Premium 32 bit and it does not allow me to change the brightness of the screen, when I use the sliders, then click on save changes, nothing happens, tried to restart anything, tried the monitor generic PnP Manager peripherals/monitors/uninstall and nothing happens , can someone please help me my screen is literally blinding my eyes!

  Hello

  Thanks for posting your query in Microsoft Community.

  We would be happy to help you with the problem you are facing today. I understand the difficulty.

  Here are the instructions for setting the display brightness. Basically you can adjust the gamma in Windows or adjust the brightness on the screen itself:

  Within the BONE:

  1. press Ctrl + ESC, then type "control". This will put you in the control panel.

  2. double-click on the display icon.

  3. Select "Calibrate color" icon located on the left side of the screen next to a blue and yellow shield icon.

  This wizard provides a walk through to adjust the settings of your screen for the color and the brightness of your monitor setting.

  The Wizard "calibrate color" is good to cross, but the area you want to adjust brightness would be the page titled 'adjust gamma. You can adjust the settings until the screen has the brightness that you prefer.

  See also the link below.

  Adjust the brightness and contrast of your monitor

  http://Windows.Microsoft.com/en-us/Windows/adjust-monitor-brightness-contrast#1TC=Windows-7

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

  Thank you.

• change from 32-bit to 64-bit on windows 7

  Initially, I installed my Windows 7 with 32-bit but have since added more than memory and want to change to 64-bit.  How do I go about it?

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed. Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Change color of Partition Image factory after that Windows 7 Home Premium 64-bit upgrade

  I bought the package of Microsoft Family Pack Windows 7 Home Premium 64-bit upgrade. I upgraded my HP Pavilion m9525f without problem. However, when I upgraded HP Pavilion Media Center m8547c PC my work wife I noticed that the partition image factory had changed from blue to red. His computer is now slower that it was running Windows Vista Home Premium 64-bit years she gets blockages requiring restarts.

  I have installed all the software HP upgrade to his computer and deleted all unnecessary programs, run the cleaning program in Accessories, defragmented the drive and ran sfc/scannow, who finds no problems with its operating system files.

  There is a serious problem, indicated by the change of color of partition to factory?

  Hello Archquark, you can delete the partition D: HP Recovery restore and recover this disk capacity.

  If you have the game to restore HP Recovery disk, which you should have done when you've got the system, you can still use them to restore the system back as it was when shipped from HP.

  I, personally, to remove these partitions recovery, because as you said, that they are usually outdated very soon after you get the system, but I wouldn't recommend others that under normal circumstances.

  I don't know why a temp. file was created in your D: Recovery partition.

  Windows 7 installation can be linked to the Vista install, and you will need to have Vista installed in order to perform the upgrade to Windows 7 If you have in the future.

  There are a few different methods that Microsoft and HP use to upgrade to Windows 7.

  I got a system until Windows 7 came out, but with a free Windows 7 upgrade when it was released. I got the Windows 7 upgrade disc and he ran like an upgrade. Later, I had to change the hard drive without an operating system installed and was able to perform a new installation with the provided HP Windows 7 upgrade disk.

  Appears to be a tossup. If you decide to delete the D: Recovery partition, you probably that in the Windows 7 Control Panel Setup, administrative tools, computer management, storage, management records.

  When you get there, just select the D: Recovery partition and select this option to delete the volume.

  Then select the C: partition and choose the volume and it should expand the C: partition to include the ability to partition D: previous.

• Change from 32-bit to 64-bit with Windows 7 Home Premium Upgrade CD

  Hello

  I'm currently on Windows 7 Home Premium 32 Bit.  Is it possible for me to move my Windows 7 32-bit to 64-bit using my Windows 7 Home Premium Upgrade CD? That is to say: to start my laptop with 64-bit upgrade CD and reformat my system?

  Yes, you can use the same product used to enable the 32-bit version with 64-bit disc.

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the DVD 64 bit Windows 7

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• I want to install my photoshop 5.0 but limited edition pc screens, I have to check if it is a 32-bit or 64-bit application. I changed my windows XP to win7 64-bit operating system (I think that's the problem) how can I use my photoshop on this system?

  I want to install my photoshop 5.0 but limited edition pc screens, I have to check if it is a 32-bit or 64-bit application. I changed my windows XP to win7 64-bit operating system (I think that's the problem) how to install and run my photoshop 5.0 the on this system?

  It is no longer available via adobe and if buy you it to someone else, that you will probably have problems running.  I think that it is compatible with win 98 but I don't know if it's available for you using compatibility mode.

• Change Win7 64-bit to 32-bit on the Satellite Pro C660-16N

  Hello.

  >... Satellite Pro C660-16N - Windows 7 64 bit Home Premium pre-installed...

  Nobody knows what the best route is change Win7 64 bit for Win7 32 bit. This model has a 32-bit install on HARD drive recovery option?

  Or he will have to do a clean install of Win7 32 bit DVD.

  Thank you very much.

  I guess that this laptop is available with 64-bit only (specification) and there is only one way to install the version OS 32-bit, you must install it using original Microsoft Win7 32 bit installation disc.
  Please note: for the activation of the operating system, you can use the product key from the sticker. You must purchase a new license for your own installation.

  By the way: also check if this laptop model is supported for 32-bit version. You can do this on Toshiba support and download page under http://eu.computers.toshiba-europe.com

  If you have any other questions you are welcome.

• Re: Satellite P750 - changing from 32 bit to 64 bit

  I just bought a Satellite P750 (64 bit compatible) and did the quick start upward following the instructions that says I'll get a chance to say if I want 32 or 64-bit. Only, it didn't. Have you regions, time, etc. and then started upward. But in 32 mode. Can I uninstall the version of 32 ome and reinstall or change to 64-bit.

  Can anone help?

  PS am new long-term tragic Windows 7 XP.

  Hello

  Can you please tell us what P750 (P750-xxx) do you have exactly? I just want to check tender specifications on the Toshiba support page s.

  I have older P500 and I got it with 64 bit only OS. So I don't know if the most recent model is offered with the OS 32 and 64 bits. For example, I saw on the page s Toshiba P750-100 comes with 64-bit only.

  Can you please check again the version of Win7 is installed (Control Panel > system).
  Somehow I doubt that you have a 32 bit OS.

• Inoperative"HP Support Assistant" on a HP Pavilion p7-1254 to help de-Windows 7 Home Premium 64-bit

  Product name: HP Pavilion p7-1254

  Operating system: Windows 7 Home Premium 64-bit

  Error message: HPSF.exe has encountered a serious problem and needs colse.  Click 'OK' to outomatically restart this application

  Changes to the system: NO

  When the error occurs?  Is this a feature repeated at startup or at another time?  Updates to the system recently (Windows Update or other updates from HP support)?

  The normal solution for most of the problems with HP Support Assistant is to uninstall the application from the control panel / uninstall a program.  Then download and install the latest version of HP Support Assistant from the HP Web site:

  HP Support Assistant

  Search the topic download HP Support Assistant and select laptops or desktop computers, according to the case.

• Ved Fejlkode 80070643 instal. sikkerhedsopdateringer I have Windows 7 Home Premium 32 bit

  10 STK sikkerhedsopdateringer til Windows 7 Home Premium, 32-bit
  will be mislykket the entire installation.

  Alle: KB235886, KB2360131, KB2416471, KB2207566, KB2281679, KB2296011, KB2378111, KB2387149, og KB979687 KB981957, har fejlkode 80070643

  PCen genstarter utallige twice when opdateringerne must installeres. Is standser every time the 67% and will never leave.
  My a provet ved genstarte several days, but opdateringerne are not yet installed.
  Help, please.

   

  You are here in the English forums. Always ask questions in English here.

  Please change the language:

  http://support.Microsoft.com/common/international.aspx

  and ask your native language forums. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Replacement of motherboard on PC HP Media Center under Windows Vista Home Premium (32 bit)

  On a HP Pavilion Media Center m8226x desktop PC is running OEM Windows Vista Home Premium (32 bit) version.  Replacing motherboard ASUS M2N68 - motherboard HP Narra2-GL8E 6150SE with a card mother MCP61PM-HM (Nettle2) due to the failure.  The two boards have same chipset and form factor.  Can I just replace the Board of Directors without having to reinstall windows?  Do I need to install new drivers?  I do not have a CD installation or installation key, Microsoft would provide a key if necessary?  Is there a link I can reference for replacement MB / install?

  Thanks for you help!

  HC

  OEM license is linked to the original version of the motherboard, it is M2N68 - LA. You lose OEM 'rights' when you have changed the Council.

• Windows XP Media between 32-bit and 64-bit versions?

  original title: Windows XP Media bit versions

  Windows XP Media between 32-bit and 64-bit versions?  I think I have 32 bit, but not to the House to check.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Only 32-bit.

• How to install Windows Vista Home Premium 64-bit?

  Hello! Can someone tell me how can I make Windows Vista Home Premium 32-bit to 64-bit?

  Here's my question: -.

  1. I bought a version of Windows Vista Edition retail family Premium, the package has only the 32-bit support (DVD). I found a few website say that the product key for the retail version of Windows is for 32-bit and 64-bit, as long as we use 32 - bit or 64 - bit on a single computer at a time. If I'm wrong, anyone could answer my question?

  2. now, I plan to move from 32 bit to 64 bit, my problem is that the version sold at retail of Windows that I purchased only contain 32-bit media:-

  (a) is there a way I could install the 64-bit Windows?

  (b) is it possible I could get 64-bit support?

  (c) could I use media in Windows Vista Home Premium 64-bit retail a friend to install on my computer? And after installation, I can activate Windows with my product key?

  Looking forward to the responses, thank you.

  Do you a clean install from 32 bit to 64 bit.

  http://www.Microsoft.com/windowsvista/1033/ordermedia/default.mspx

  Link above is how you get 64 bit DVD, if you have a retail license.

  You can use any Microsoft Vista 64-bit DVD and use your 32 bit key as you say it's Vista Retail

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon...

  Mick Murphy - Microsoft partner

• I have AutoCAD 2002 a 32-bit program cannot install on my Window Vista Home - Premium 64 bit OS. Can someone help me, please?

  I have AutoCAD 2002, a 32-bit program, I can't install it on my computer which has Windows Vista Home - Premium 64 bit OS.
  Can someone help me, please?

  Hi JohnMcLarnon,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks like you can not install AutoCAD 2002, he would be grateful if you can answer this question in order to help you further.

  1. what happens when you try to install, summers - get you any error message or error code?

  2 is the issue limited only during installation AutoCAD?

  3. have you made changes on the computer before this problem?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled: http://support.microsoft.com/mats/Program_Install_and_Uninstall?wa=wsignin1.0

  Troubleshoot installing or uninstalling programs: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-installing-or-uninstalling-programs

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.