Windows 8 does not ask me 'yes' or 'no '.

Similar Questions

• Windows XP does not ask for password for a secure network, wifi not connecting. Says "validating identity".

  Have tried just about everything I can think of. computer is connected to the front secure networks without problem.

  More information would be useful.  Windows XP did not support thereafter until SP3 WPA2 wireless encryption, so if you have not installed SP3 and try to authenticate on a network protected by WPA2, it may not work.

  Assuming that you do not have SP3 installed, try to go into your wireless network configuration / configuration screen.  (There are several different configurations of wireless, including ZeroConfig, but we do not know that you are using).  All most of them save previous in a 'profile' wireless connections so that when he meets this wireless again, he knows how to configure itself.  Find the section of your configuration screen profile, look for the SSID of the router you are trying to connect, and if you see it, then delete that profile.  This will allow your machine to then reconnect to the router wireless with an open mind.

  HTH,
  JW

• Windows 7 does not ask for password when password protected sharing is on.

  Hi guys,.

  I'm no stranger to permissions etc as I work in it, but it confused me after 4 hours of messing around.

  I'm trying to make sure that when I share a file on my home network that windows requires a password in order to access what it is not doing.

  The following conditions are true for both machines:

  Are windows 7 Home premium

  Have file sharing enabled on each respective network adapter

  Are members of the home network

  Are both on the network, called "WORKING group".

  Assistant file sharing was turned on and off then to make sure it wasn't an influence, it is currently off as he auto-actions the user root folder.

  Network discovery is on

  File sharing and printer is on

  I tried the two combinations of sharing folders public or not, but is currently disabled.

  Streaming media is off

  Password protected sharing is on

  Tried the two combinations of user accounts and passwords to connect to other computers. (This is currently set to allow windows to manage)

  So I won't list them the public parameters are not relevant.

  I put one hand on my laptop remove 'Everyone' and 'administrators' only have my own authorized account which is be an administrator.

  My other machine but I still seem to be able to open and access the folder. I tried to change advanced sharing permissions and security settings to exclude any group that can be let my other pc on the network but so far still no prompt for password.

  I even went to regedit and apply the following on both machines:

  1. Open Registry Editor (Start search - regedit)
  2. navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. create a new DWORD value with the following properties: NAME: LmCompatibilityLevel
  VALUE: 1
  4 reboot your PC and try again to establish the connection.

  Can anyone help?

  Thank you people!

  I think I've cracked the question:

  I created a new account admin on my PC and the first time I tried to access anything, I got the password. I don't have it a second time.

  I then removed and put in the passwords and then disconnected cache and back in and asked again the password.

  I tried the same thing on my other account, but it has not yet requested.

  It turns out that even on another computer, if you have the same username and password that it automatically authorizes for good once you enter the network password first.

• Firefox does not ask to save tabs, windows and exit

  I've done everything suggested in this article:
  https://support.Mozilla.com/en-us/KB/Firefox+does+not+ask+to+save+tabs+an...
  In 'Options' settings are ok.
  I don't have the extensions/themes. And the problem is still there on the safe mode.
  Out of the two files mentioned as maybe corrupted, I deleted formhistory.sqlite but the sessionstore.js file is not in the profile directory, the closing of Firefox (as the article suggests... it is there when Firefox is open)

  What is the start setting?

  Tools > Options > general > startup: 'when Firefox starts '.

  In Firefox 3, you don't get popup "Save and quit" dialog box if you choose Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.
  
  If this option is selected then your pages will be already reopened the next time.
  
  To get this pop up dialog box, select one of the other options (display my home page, display a blank page).

  You can reset the preferences of warning on the subject: the configuration via the context menu page.

  browser.tabs.warnOnClose , see http://kb.mozillazine.org/About%3Aconfig_entries
  browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
  browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
  

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• Windows Activation does not third time I reimage PC

  Back to vious versions of this OS, if you have installed too many times, you could call a number where you could put your license and it would give you another code to put in and then you would be activated. I think that Win7 is doing this. Windows 8 does not work. and when I get help from Microsoft, they want the money first. Devil... I already bought this product. I don't understand... They do not want it used on more than one PC... I GET IT... I am ready to just use 14.04 Ubuntu if I can't get a good solution within a reasonable time (YES, PASSIVE aggression is my middle name today!) lol

  Thanks for reading...

  David Sood

  No, Sir, no system restore is happening... I just deleted my scores three times to put the base OS. Since I found a link that made me a cat Ms. They have been great. they ran "slui 3" that I saw didn't work, then they run MSDT and put in their code... After a reboot, Viola! I had my back activation key. Please do not ask me what does this first order of market... I forgot already... lol...

  Thank you kind Sir for your attention to this issue...

  David

• Windows backup does not complete

  Same as above

  every other day I get a msg on my windows backup does not complete. What's wrong? I have inserted SEVERAL CD and it never seems to have solved! What should I do?

  Hello
  • What type of files are you trying to backup?
  • What version of the Windows operating system do you use?
  • You receive an error code?
   
  Do not include the libraries while safeguarding and then check what is happening.
   
  Here are some articles that you can consider moving by before starting the backup.
   
  Back up your files
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files
   
  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
   
  Back up your programs, files and system settings
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-programs-system-settings-and-files
   
  Should what backup settings I use to maximize my disk space?
  http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space
   
   
  Post back with the State for additional troubleshooting steps.

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Reformat and re-install XP SP2 but now struggling with the updates. Windows Update does not work. Loading SP3 will fix this?

  After repeated BSOD (FLTMGR_FILE_System 0x000000F5, 0 x 00000066, etc.) errors usually 7 to 8 minutes after the start, I reformatted the drive C: and re-installed XP SP2.  But since then, I had a very hard time updated.  I even got again the WORC and had to go back to a previous restore point after installing IE8.

  Windows Update does not work.

  [Error number: 0x8024400A] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues

  Hello.

  Try the suggestions on this site:

  http://support.Microsoft.com/kb/836941

• When I start my computer, it does not ask for my password and it does this since I got it!

  Hello! I had a bit of problem my computer! Every time I have start or restart, it does not ask for my password! I have a big family and I only used of the on my account! I got the editable or something like that! I mean I can delete others has put some programs and all that! But when I start my computer, it does not ask for my password! Just open on my account! I already try to reset a password and everything and it does not work! But when come from my screen saver and I want to go she it ask for my password and it is normal that is what I want and when I she ask for my password, but if I restart or close and open it again it open on my account so EVERYONE can go on it! So please help me! Thanks to all the people who read this and thank you to all who will help me!

  Hello mk_wolf_69,

  Please see the link below with respect to automatic logon.

  How to enable the automatic logon in Windows XP

  http://support.Microsoft.com/kb/315231

• Please help: Windows XP does not start error message: STOP: 0 x 00000024

  Original title: Please help: Windows XP does not start.

  Windows XP does not start, there is a message: STOP: 0 x 00000024. and run CKHDSK/F to check for hard drive corruption. But I don ' t know how to make it work? Please help, thanks.

  If this is the message you get, then you have multiple problems...

  1, xp should be on the C: drive, not F:

  Default C: is for the OS only. With xp on drive F: and you use only a hd

  then the hd must be formatted and all partitions deletion (unless there is a relocation

  the operating system is present). Install the xp installation cd, boot the pc on a cd (some PC need BIOS

  be defined for this, (boot priority), once at the cd menu, press r for recovery console, select 1

  for the C: drive, press enter for the password, type: Diskpart in diskpart, see all partitions, delete all,.

  Create one, press the key type, ESC: EXIT leave pc reboot, install xp from the cd, format it when asked.

  Read kb307654 or kb314058

• Windows XP does not start a guard on recycling "PARTITION UNKNOWN"

  Win XP guard recycling as the Windows logo appears it restarts and recycles. Tried to boot using the Win XP installation CD and choose repair, but it just prompt "C:\". "no windows directory. try to restart again, but now, choose the ENTRY instead of R, so it scans for possible old windows partition but it shows "UNKNOWN PARTITION."

  screenshot

  What is the cause of this problem? Why the partition of work suddenly PARTITION UNKNOWN?

  Hello pj96,

  If we get a prompt start to the recovery console C:\ then I would speculate that the machine does not ask to connect you to the recovery console, either.

  It is usually a sign of NTFS corruption.

  At the C:\ prompt, execute the following command followed by the Enter key:

  CHKDSK C:/P

  This can take a long time to run depending on the player, the amount of data is corrupt how they are.

  Best regards

  Matthew_Ha

• Windows Update does not... (error 0x800A0046)

  original title: Windows update does not...

  Windows Update will not work... asked me to define my security settings for IE (userdata persistence) that has actually been the correct way. I even tried the www.update.microsoft.com movement in a trusted location. I keep getting error (0x800A0046) even with the persistence of data user defined correctly and this field set to always allow cookies. Any ideas?

  It's on Windows XP sp3, IE 8. I have some problems with Visual Studio 2008 and just uninstalled/reinstalled this weekend and noticed this problem when I went to look for updates after a fresh install.

  I did have previous problems with updates on this machine.

  http://support.Microsoft.com/kb/910338/en-us

  http://support.Microsoft.com/?kbid=883821

  UTC/GMT is 22:02 Sunday 16 October 2011

• My windows sidebar does not work.

  Original title: ask the community

  Hello, my windows sidebar does not work, and when I ran it say my sidebar is managed by the administrator of my system and I don't have any administrators on my computer to change the settings, I would change my sidebar to reaper again my computer doesn't not part of a network

  Try this FixIt associated Vista Sidebar

  OR
  Check this answer

• Windows Vista does not accept my password (unchanged) but I have no recovery disk - Windows is already installed

  Hello

  As the title says after using my laptop without any previous problems, suddenly I can not connect on Windows Vista.

  I'm 100% sure that the password has not been changed, caps lock, shift, caps lock Num etc is not active.

  When I bought the laptop, Vista was already installed, so I don't have a recovery disk.

  Any help would be appreciated.

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  This is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Malware can also cause problems with passwords:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the above does not fix it:

  Here are the different methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.