Windows 8 - Metro UI crashes / Office works very well
After turning on my Acer Aspire S3 yesterday, I found the Windows 8 start in mosaic screen start crashed immediately.
Problem solved... for now at least. I did the system restore earlier I could do (23/05/2013) and it works again. Ominously, this restoration comes just before a Windows Update, which would suggest that is what has caused the problem in the first place!
Tags: Windows
Similar Questions
-
HOW CAN I GET MY P3 PRO swing work with windows 7 it was working fine with xp
Hey golfer.
You should check whether the game is compatible with Windows 7 or not. Here is given is the link to verify the compatibility of all software\hardware.
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
If the game is not compatible, to work around the problem, you can try to install it in Windows XP compatibility mode and check if that helps.
To run the troubleshooting program compatibility Troubleshooter
- Open the program compatibility problems by clicking on the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under programs, click run programs made for previous versions of Windows.
- Follow the instructions contained in the resolution of the problems.
If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.
For more details follow the link below.
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
At the office, InDesign works very well. At home, it totally crashes and all I get is the reel spinning death everytime I go near "file." Is there a solution? I can open a previous file or start a new popup tutorial, but if I try to get close to 'File' to place an image, he out craps. Is there a solution?
reset your preferences -: https://forums.adobe.com/thread/526990
-
12 Firefox does not get beyond the crash report. This is a second account (standard). However, it works very well on a third party, as well as on the main one admin account. I reinstalled Firefox, disc repaired permissions and so on, but nothing helped. For the second account .plist file could be damaged? I can't remove it because of permissions so cannot test this. Please notify.
Try to repair disk permissions:
-
Tecra 8200 - works very well under Windows 98SE, but not on Windows 2000
Hello
I've updated my Tecra 8200 for Windows 98SE and Windows 2000.
Windows 98SE, wireless connection works very well and I was able to access the internet through my SMC Barricade router.
But on Windows 2000, this no longer works.
The connection to the router is ok, but I am unable to connect to the internet or to the page web administration of the router.
The Toshiba Wireless Client Manager provides the following information:
Status:
------
Connected to the network: SMC
Connection: Excellent
Access Point name:
Channels: 2
Encryption: on----------- Warning ----------------
Impossible to communicate with the AP.
Please check the encryption and IRQ.Yet once, I insist on the fact that under Windows 98SE, everything worked well... an hour ago...
I am running Windows 2000 SP4 with the latest updates.
Could someone help?Thank you
François
Hello
Thanks for the solution. I hope that the installation of Windows 2000 Service Pack 1 helped.
Good bye
-
NEW HP computer bought in September, already updated to Windows 7 with HP upgrade kit. I installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online. Also can not get a pop window to activate by phone. HP says that I must fully restore Windows Vista x 64 Home Premium AGAIN at the factory all MICROSOFT updates, and THEN... so I can reinstall Windows 7 upgrade. Why now only after 30 days Windows 7 refuses to ACTIVATE! Nothing but run between Microsoft and HP > Please HELP without having to reinstall EVERYTHING on my computer.
Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.
If you were not able to validate, follow these steps:
1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062
-Online Windows XP: double-click the executable file to run the tool.
-Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.
2. after running the tool, click the Windows tab and then click on copy to the Clipboard.
NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.
3 start a new post in the appropriate Microsoft Genine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine
4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
My secondary hard drive (f) disappeared. However when I run windows xp (sp3) in safe mode, it is there and works very well. Help please.
Hello what jay,
Thank you for your message. Please, try the following:Click 'Start' > right click on 'My computer' > select 'manage '.Click on "disk management".Here you see secondary hard drive?If so, you can assign it a drive letter and everything should be good.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
ESC key does not work, it works very well outside of windows, and on other computers
Until you tell me to try another keyboard: I. Two keyboards work very well outside Windows 7 and on other computers. Certainly, the problem is with Windows 7.
I think it is a problem caused by "accessibility options." I disabled all the sticky keys, but I still can't get it to work. Any ideas?
For some reason any he just started working on not the case. Restarting just seems to me that fixed it. Thanks for the suggestion though.
-
worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please
Hello Hans,.
Thanks for choosing Microsoft Community!
According to the description of the problem, you have problems when you use the backup on Windows 8 feature.
Please answer these questions to better understand the issue and help you:
1. are - what you're talking to backup and restore functionality on Windows 7?
2 have you made any changes to the computer before the show?
It is perhaps to cause bad sectors on the hard drive, run the disk check to repair bad sectors
Check your hard drive for errors:
http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
For more information:
Backup and restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.
-
My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver. How to stop this message?
Visit the HP website and download the driver you need.
Good luck.
-
My OS windows 7 does not work very well, can not install or uninstall programs
My OS windows 7 does not work very well. Cannot install or uninstall programs. A week back ilivid software got installed, guess this particular software has caused the problem. Cannot run the task with the option in the control panel. I don't want to format my system since there are a lot of personal data. Instead of looking for any option of repair for BONE. Would appreciate if you can let me know the best way for recovery.
My OS windows 7 does not work very well. Cannot install or uninstall programs. A week back ilivid software got installed, guess this particular software has caused the problem. Cannot run the task with the option in the control panel. I don't want to format my system since there are a lot of personal data. Instead of looking for any option of repair for BONE. Would appreciate if you can let me know the best way for recovery.
Hello
I would recommend to restore the system to a date before the problematic software installation / before the start of the question - Windows system restore 7
Kind regards
Patrick
-
I upgraded my laptop Toshipa from windows 7 to windows 8, library Shamela worked very well under windows 7, now after the library Shamela upgrade does not work properly and the titles are written in the language of gibberish. Any solution please
Are you referring to a custom library that you created?
If you are, try to remove the library then re-create and see whether or not it appears correctly.
-
Trapcode particular not showing on Render but works very well in the compose window
Trapcode particular not showing on Render but works very well in the compose window.
Hi do not know why it does not appear in my Render.
My computer is not trolling, everything works fine.
My computer specs:
I7 - 5820 k
GTX 970
16 ram
Composition window:
Render:
Try adjusting the comp on camera Active - this is what happens for rendering. I don't know where you got this name of camera or whether it was imported from a 3D rendering, but to be sure to always have the comp set to camera activates when you're overview of your work.
The usual troubleshooting procedure is to go to the bottom of the list of changed properties and start reset first those most suspicious. Many times it is easier if you solo the layer in question.
The first suspicious that I see, it is the position of your transmitter would be behind a normal camera to default position:
If I add a camera by default to a model, add a solid, add individual and then use your position parameters the particles all move out of sight of the camera
After a reset:
-
All the applications in the creative cloud crashes at random times. Always worked very well, now he doesn't. It crashed just before I updated, and after that I just updated. Photoshop, illustrator, After Effects, first everything crashing. Adobe pretty edgy.
Please contact our staff of support directly by following this link: contact Adobe customer service.
For more information, please visit: FAQ: how to contact Adobe for support?
-
I have recently installed Windows 10 and had to re - install Photoshop CS2 Version 8. It works very well but he says it's a trial version how to activate it?
You can not activate Photoshop CS2 as long as obsolete Adobe product activation server. Instead, you will need to download a special version that uses a different serial number, and does not need activation. Note the serial number to the right of the product name. Your existing serial number will not work
Download Acrobat 7 and CS2 products
Hope that helps.
Maybe you are looking for
-
Can I put my music on a memory stick so I can play the music in my truck radio?.
I have a CAREB computer with processor intel and would like to load my music on a flash drive to play in my truck radio, will ITunes work on it instead of download to a CD?
-
I'm having a problem find Lenovo T440p with HD4600 and Eizo S2100 work as an external display. I was able to get it work only with resolution 1240 x 1024 however monitors maximum is 1600 x 1200. The operating system is Windows Pro 8.1. Connection bet
-
Pulse TTL-PCI-6503 write in a log .txt file
Hello, I need to connect the PCI-6503 data output to a log .txt file. This PCI-6503 map reads a pulse sent from another PCI-6503 located in another computer. I want to just save the .txt file if a pulse is received. I know how to create and write to
-
Can anyone help please?
-
"windows cannot find a driver" in the installation package?
We have a file server and print XP on our network that has a printer Series PCL LaserJet 3330 installed 5th (using the original installation CD and prints from the XP Server). While trying to install the printer on a remote computer, I downloaded the