Windows 8 must be installed on the SSD?

Similar Questions

• I want to synchronize my Firefox on Windows, but also Linux installed on the same computer. How can I do this?

  I want to synchronize my Firefox on Windows, but also Linux installed on the same computer. How can I do this?

  Add the installation of Firefox 2 as a "new device".
  
  https://support.Mozilla.com/en-us/KB/add-a-device-to-Firefox-sync

• When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  Hi Scarface0721,

  Welcome to Microsoft Answers Forums.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) game in which you try to read?

  (b) have you been able to install and play the game before?

  (c) you are trying to install the game to your computer from the disk or directly trying to play from the disc?

  Method 1:
  Try to install and play the game in a different computer.

  Method 2:
  Try another disc and verify if you are able to install the game.

  Method 3:
  You can also post your request in the following forums site.

  http://forums.gamesforwindows.com/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What instalis in the SSD a HP software want to 6 t - 1000?

  A few days ago, I spent an order for a 6 t-1000 of envy ultrabook that comes with a 32 GB SSD and a 500 GB HARD drive.

  I would like to know if HP will install Win 7 in the SSD or HARD drive.  Thank you.

  EMEM

  Hello

  The operating system will be installed on the SSD.

  Best regards

  DP - K

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• Vista security question: my Windows Firewall must be on? The McAfee Firewall is enabled

  I have Vista Home Premium. I got to enter the Dell support center. "I think this is the first time that I did. It showed that I have Windows Defender on, but not the Windows Firewall and it does not show that I have McAfee Sequrity Version 9.15. My question is #1. My Windows Firewall must be on? The McAfee Firewall is enabled. #2 Why do the McAfee security information appear in the General Info tab or the Security tab I'm sorry if this is such a fundamental issue that I know enough about computers to be dangerous.

  Thanks for any help in advance.

  I don't know why McAfee is not in the Security Center.

  I can only answer to your question n ° 1... to omit the Windows Firewall. McAffe has its own firewall. If you expand the firewall section of the Security Center, you can see this note:

  Two or more firewalls at the same time may conflict with each other.

  t-4-2

• I have a PC with windows 7 Home Premium installed. The PC is faulty and cannot be resolved. Can I reinstall the same Windows 7 to a new computer without additional cost?

  I have a PC with windows 7 Home Premium installed. The PC is faulty and cannot be resolved. Can I reinstall the same Windows 7 to a new computer without additional cost? If yes how can I do this? Some people reported issues license keys and it cannot be registered once in a PC.

  Thank you

  It is the major limitation of the OEM software that it can be installed on a PC. The COA label will confirm whether the license is OEM. A number of elements can be replaced in a PC in the way of repair, but only if exactly the same model of Council can this be exchanged.

  Even if you transfer the drive to the new PC would not authenticate because of the change of equipment, and it would be unlikely to to re-authenticate online.

  If the label is not OEM and you have a retail package, so it can be transferred.

• My previous version of windows (which is already installed on the hard drive) will erase if I boot from a bootable USB. Please help me!

  I have Windows 8 is installed and an iso of Windows 8.1 on my USB.

  My previous version of windows (which is already installed on the hard drive) will erase if I boot from a bootable USB. Please help me!

  When you upgrade to 8.1 Windows it will replace your Windows 8.0. The only way I know to have both is to buy a copy of Windows 8.1 and install on another partition or drive.  Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• Reinstalling windows 7 ultimate retail after changing the SSD, the motherboard and the processor. I'm having a problem with the reactivation?

  I'll upgrade my desktop PC, by changing the motherboard, processor and SSD drive with the OS on it to boot. I have a problem with the reactivation of windows, and should I turn it off, somehow first, or the previous version will be considered as-enabled automatically? It is a retail, windows 7 64 ultimate version. Please advise, thanks in advance.

  Just reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Remember, if it is a retail upgrade license:

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  You can skip to enter the product key and try the activation of the phone to work around this problem.

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• Captian El is not installed on the SSD disk fusion part after recovering from the internet

  I found that my Mac OS X El Captian is installed on the part of the hard disk of 1 TB disk fusion rather than the part of the SSD drive after the installation of recovery of the internet.

  And the SSD disk fusion part seems to be "not fitted"...

  May I ask if this is correct?

  I saw on the article depending on whether recovery facility will automatically take care of the promenade of the merger and put the files system on the part of the reader Flash memory:

  http://www.PCMag.com/Article2/0, 2817,2412726,00.asp

  If my drive information below is not correct, do the following:

  1. partition SSD disk fusion part and

  2. Mount and

  3. repeat to Install OS X on this SSD part internet recovery rather than the part of the hard drive of my 1 TB drive

  Your opinion is greatly appreciated!

  Images of the State of my hard disk is shown below:

  

  

  

  ... also, I found that there are 2 Macintosh HD, showing at startup. If I choose a 1st, a banned logo will appear once a while and the will of the computer just froze there. Only when I choose the 2nd Macintosh HD, I can login in the OS correctly...

  Should not be only one Macintosh HD picture to the choice at the start?

  Emergency assistance is needed...!

  Thank you!

  

  

• If an application includes references ActiveX from Excel, MS Office must be installed on the PC to run?

  There are a lot of discussions about the use of MS office with LV, but I wasn't able to find the answer to the next question. I hope someone can help or point me to a good thread.

  I have an excel template file and want to create reports every time him. There are a few solutions to this problem, which are very good. But, in the end, I'm going to build an application and install it on an industrial PC which doesn't have MS office installed. The question is whether the application runs on the target computer as well.

  I am specifically geared towards the solution here that uses ActiveX reference to Excel._Application. Target no chance that this solution or any similar work on my computer?

  If you're wondering why I want Excel reports on a computer that does not have MS Office, I must say that the reports are simply stored somewhere on the disk to be transferred later to the seat say!

  Development of machine: Win7, LV8.6 Pro + report generation toolkit

  Target machine: WinXP SP3, engine of execution of LV

  Thanks in advance!

  Soroush

  You must have Office installed on the computer that is running the LabVIEW application. It's the Office applications that provide the ActiveX functionality in the report generation tool. Without them, LabVIEW has nothing to interface to.

  http://digital.NI.com/public.nsf/allkb/02E339E26484F30186256E920061FBD9

• Update for Internet Explorer 8 Compatibility mode list for Windows Vista (KB982632) cannot install with the error details: Code 80070490 & also update for Windows Vista (KB981793) with the details of the error: Code 80070490

  I am running windows vista Home premium, on a system 32-bit HP Pavilion dv9700 op.  I have internet project 8 service pack 2 of windows and norton security suite installed on my computer.  I do not understand why these 2 updates keep do not install unless it didn't, but they are listed under important updates in the windows updates, can you please help me, maybe I don't have not enough memory on the left?

  Thank you!

  Windows Update error 80070490

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.

  The System Update Readiness Tool for Windows can correct some conditions that causeWindows Update error 80070490. You can access and run this tool by reading this http://support.microsoft.com/kb/947821 on the Microsoft Web site.

  If the system update readiness tool solves the problem, you need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.

  Once you have completed the repair, you will need to restart Windows Update to install updates are not included on the installation DVD. RepairWindows, follow these steps:

  1. Close all programs and restart your computer.

  2. Insert the DVD into your disc drive. Wait for the installer to start. If the installation program does not start automatically, follow these steps:

     1. Click on start and type Drive: \setup.exe in the search box. ReplaceDrive with the letter of the DVD drive of your computer (for example, D:\setup.exe).

     2. List programs, click Setup.exe.

  3. Click on install now.

  4. Click go online to get the latest updates for installation (recommended).

  5. If you are prompted to do this, type the Windows product key.

  6. What type of installation you want? window, click upgrade.

  7. Once the installation is complete, restart your computer, and then run Windows Update.

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What and how many programs must be installed on the computer

  for example I have the flash player adobe, 10 plug-in, Adobe air, adobe flash player 10 activex. Adobe reade 9.4.0 and adobe showckwave player 11. all installed on the computer is it necessary...? ... I just bought computer from a previous owner and he had a lot of additional programs on it and I'm not sure if I remove these properly and not used to damage files if someone knows how to solve this withou restore computer to factory settings please answer thank you

  Hello

  I let the Adobe programs on the computer because they may be needed, but I stopped
  their loading at startup like that is really not necessary.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7<-- this="" link="" makes="" it="">
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  ================================================================

  If you want to uninstall a program, you are not sure, then do a Restore Point and backup
  the first program.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ================================================================

  A great program to use to remove other programs is Revo Uninstaller - free Version.

  Revo Uninstaller - Free Version
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How identify which windows Vista worm was installed with the product key

  I have a laptop that someone put windows XP on it. It came factory thew with Windows Vista and has the product key on the bottom of the laptop. But I don't know which Ver of Vista the key code to go with. I want to get the right NVA and install it. Is there a way to know which version of windows Vista to go popular with the product key code.

  Thank you

  Mike

  You can't say the product key.  If you use an Installation of Vista genuine disc it will install its own version to know the product key when you are prompted to enter (all versions of the same size of the bit are included on the authentic disc).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.