Windows 8 - save the .dll files

Original title: salvation

Hi I tried to register the dll files to cmd, but some of them gave me an error 0x80070005 so how can I fix in windows 8

Windows key + X and select command prompt (Admin), then you will have administrative approval.

Tags: Windows

Similar Questions

  • Windows registry is linked to the .dll files? HELP several BSoD and browse... crashed during post! for the love of God

    Must be quick, title says it all
    Windows registry is responsible for the .dll files?
    SFC shows SEVERAL DLLs not missing, no installation CD.
    Not good recovery CD.
    I have the copy of the registry before changes but online before browser support multiple and many BSOD.
    Will post now as browser crashed early in post and the 5 th time in half an hour.

    Thanks for the reply Elizabeth23, but I finally found the part of the SFC.

    SFC showed 167 system missing files - if you continue to press Cancel > continue every time SFC tells you to put in your Windows installation CD eveeentually happen to you at the end of his race - and I ran 3 times and each time got 167.
    Now I had some of the 'missing' located in System32 .dll files, but some were also in i386 and the drivercache but I had not located a bit; but I knew that something is not right I had found some system 'missing' files and after that a few hunting came across a site that said to check the registry key
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
    CurrentVersion\Setup

    and under SourcePath my entry is a file that does not exist 'Temp' so I changed the entry to C:\WINDOWS rebooted and ran SFC/scannow and it scanned without stopping.
    Weird as the registry key was in a file that is no Temp because I ran many SFC
    times in the last 2 months and it always scanned all the files in the operating system without a hitch...

    My computer is still BSoDing out, had two after SFC took place without a hitch.

  • Unable to save the host file on Windows 7 error that access is denied.

    Original title: cannot save the hosts file

    Windows 7: I want to add the new ip address for the server on the host, while adding its allowing me to save despite the UAC is lower and I am the administrator of the machine. I've run Notepad as administrator and navigate through the host file edit but during the recording of overwriting file access is denied. How can I get around that?
    64-bit Windows 7

    Hello
     
     
    Method 1:
    Try saving the file in safe mode with network.
    Reference:

    Method 2: Temporarily disable the antivirus software and see if that helps.
    Reference:
    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  • Suddenly, the 64-bit Windows 7 Media Player doesn't have a location to save the ripped files. How can I fix it?

    Suddenly, the 64-bit Windows 7 Media Player doesn't have a location to save the ripped files. It is impossible to rip CDs. How can I fix it?

    You can order these links on ripping...

    You can try this procedure to restore your windows media player.

    (1) Perform SFC first. Follow the link on how to make SFC (http://support.microsoft.com/kb/929833)

    (2) turning on Windows Media Player again.

    a. go to start and in the search type 'Turn Windows has or not'.

    b. click on the "Turn Windows features on or off".

    c. check the "media features.

    d. restart the computer.

    You can also try restore (http://windows.microsoft.com/en-us/windows7/products/features/system-restore) your computer to the final point where windows media player worked.

    Or you can use the previous versions of windows media player that comes from restore points or windows backup.

    Or you can try to run 'Fixit '.

    http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  • Error: "Canoe Photo window Viewer save the changes to this picture because there is a problem with the property of photo file" when trying to upload photos from the iPhone to the Windows Photo Viewer.

    Original title: saving photos and videos, common sense?

    JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

    JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

    =============================================
    I don't know if the following links answer your question, but
    they may be worth a visit:

    Good luck and * proceed at your own risk *.

    FWIW... There is a very long discussion (several pages) to the
    following link:

    Cannot change the imported iPhone 4S photo
    https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

    More Discussion

    iPhone 4S image properties is not compartible with Windows?
    Editing can be done on the computer due to the error
    "Windows Photo Viewer cannot save changes to this picture.
    because there is a problem with the properties of the image file".
    Any help?
    https://discussions.Apple.com/message/17291884#17291884

    More Discussion:

    We cannot turn a few photos in Windows 7 (but can turn others)
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

    A simple solution is to open the photos in paint or most other
    digital image editor and modify it.

    Some people have reported success using the following free download
    to remove the metadata.

    Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
    http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

    Here's a way to turn...

    Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
    the rotator Lossless JPEG free
    http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

    Free download JPEG Lossless rotating
    http://annystudio.com/software/jpeglosslessrotator/

  • Re: How to save the video file to a DVD-R for Equium A200

    I have the Equium A200. Someone can tell me how to save the video file to a DVD-R on my computer in order to use it later, or use it in windows movie maker and must not simply copy on another DVD-R right?

    My cursor also has disappered in the suite of windows media, that makes life quite difficult.

    Any ideas?

    Thank you.

    You mean, you want to copy the original DVD movie to HARD drive?
    Well, you can copy the contents of the entire DVD to the HARD drive. It means that you have to copy a lot of data.
    I would recommend shrinking the DVD movies using a tool called DVD shrink.
    It would decrease the data and would also copy the content to the HARD drive.

    But if you want to use these files later in windows movie maker, so you must convert these using a 3rd party tool.
    Google a bit and you should find many free applications that would help you to do this work.

    Good bye

  • How can I open the .dll files?

    Hello

    I'm opening a .dll file, because I just downloaded drivers for a digital camera, and this is part of the process.  The instructions tell me to click on this file to set up the installation.   I had to open the .dll files before, and I could find a free, fast and easy for them on-line file opener.  However, it bothers me, and I can't find another fix "free, fast and easy.  Can someone refer me to such a? So, I would be very happy!  I try to install the download and the first step is to open this file: Setup. DLL I have Windows XP Professional with SP3.

    Thank you very much!

    Jenifer

    You do not open the DLL files.

    Please copy and paste the instructions you follow or provide a link.  It is always possible that the instructions have an error and you should be by double-clicking the installer. EXE.

    What is the brand and model of the camera?

    Note that instead of connecting your camera directly to your computer, you may prefer to buy a card reader (if your computer or printer doesn't already have one) and just take the card out of the camera and read directly.

  • Ho I replace the dll files and run codes such as the double-click to open

    How to replace dll files and run codes such as the double-click to open

    Hello

    1. What are the dll files you are trying to replace?

    2. Why do you want to replace the dll files?

    A dynamic library (DLL) file is an executable file that allows programs to share code and other resources to perform specific tasks. Microsoft Windows provides DLL files that contain functions and resources that allow Windows programs to work in the environment with Windows.

  • How to make a temporary directory on my HARD drive to save the downloaded file?

    I need to download the updated printer drivers and the first thing I need to do is to create a temporary directory on my hard drive to save the downloaded files.  My operating system is Windows 7, the 64-bit version.  My printer is a brother model MFC - 240 c.  (That copy, fax, scan and has Photo Capture).

    I had a stroke and lost my short-term memory and can not remember what whether computers or at least, not a lot.  If you know how to do this, be very specific with your answer as I print it and use it as a guide I'll follow to the letter.  I'm sure that it's the easiest thing, but I just can't remember how to do it.

    Thanks for your help - it is much appreciated.

    Waylin

    I need to download the updated printer drivers and the first thing I need to do is to create a temporary directory on my hard drive to save the downloaded files.  My operating system is Windows 7, the 64-bit version.  My printer is a brother model MFC - 240 c.  (That copy, fax, scan and has Photo Capture).

    I had a stroke and lost my short-term memory and can not remember what whether computers or at least, not a lot.  If you know how to do this, be very specific with your answer as I print it and use it as a guide I'll follow to the letter.  I'm sure that it's the easiest thing, but I just can't remember how to do it.

    Thanks for your help - it is much appreciated.

    Waylin

    You shouldn't really need to create a temporary directory - especially for the Brother printer drivers.  You can download it at any place that you can easily find (like the office).  Then double-click it to run it (run) on it and let it install.
     
    I realize has their instructions (probably the ones found here<-- that="" is="" a="" link)="" say="" to="" download="" the="" file="" to="" a="" temporary="" directory="" -="" but="" i="" just="" downloaded="" the="" file="" you="" need="" (mfc-240c-inst-win7-a2.exe)="" and="" double-clicked="" on="" it="" and="" it="" doesn't="" have="" to="" be="" anywhere="" special. ="" it="" will="" 'extract'="" to="" the="" native="" temporary="" directories="" as="" needed="" (nothing="" to="" be="" concerned="" with)="" and="" then="" ask="" you="" to="" choose="" a="">
     

    Which I suppose you want to English (as shown), and then you click OK.

    He then expand some additional files and then ask you to accept a license agreement (I suggest "Yes" If you want to go further):

    In your case... choose 'Standard' and click Next and continue in this way until it is installed.  Then (once Setup is complete and closed) you can restart the computer (first and foremost) and then delete the original file you downloaded (MFC-240 c-inst-win7 - A2.EXE) on your desktop (or downloads, etc.)

    You should get through it.

  • Is it possible when you save the psd file to put an automatic jpg file saved at the same time?

    My job is to prepare images for print viewers and window facilities.  My clients need to approve in advance the photos before printing.

    I generally save my psd files, but because the files are very large in this format I usually save another copy in a jpg file which has a much smaller file size.  This makes it possible for me to add to a presentation and and send them to my client.

    Is possible when you save the psd file to put an automatic jpg file saved at the same time?  Or that I always have to do it manually?

    Use the Image Processor in Photoshop or install the free Dr. Brown Services.

  • Force firefox to open, not save the .url files.

    Hello!

    I need a way to Force Firefox to open, not to save the .url files. These files are generated by an application. The application is listed in the list of software and has the setting to open. But when the. URL link is clicked it will ask only to save. I need to open the file. not to save it.

    Thanks in advance.

    A .url file is a type of special file created by Microsoft.
    Firefox is a cross-platform application and can't stand all the platform-specific files as does a browser that is designed for this platform.

    Try to ask for advice on forum of stack overflow's website to see if they know of an alternative.

  • Insert the .dll file Ocean Optics Jaz

    Hello

    I want to use the package of spam (Ocean Optics) in Labview 2009. But I have no idea how use the .dll file in Labview. I already found tools > import > shared library.

    Insert the SPAM32. DLL file. But in the same menu, you must also insert a header file. But where can I found it? Or I do something wrong?

    Could someone help me with this?

    Stephan

    Finally I found the answer

  • Get the Error Message When you try to reinstall Vista: Windows cannot open the required file: E:\Sources\install.wim

    I'm trying to reinstall windows vista for the following reasons:

    1. I have SQL Server 2008 installed on my computer.  I deleted some files a long time ago and it screwed something and I couldn't reinstall.
    2. I had partitioned my hard drive for vista half and half SuSE and I deleted who and when I did, I think I deleted another partition - my recovery partition (E:\?).
    3. I need to clean my laptop.

    When I try to start the installation of a disk and I put in my product key, I get the following error:

    Windows cannot open the required file E:\Sources\install.wim.  The file does not exist.  Make suure all files required for installation are available, and restart the installation.  Error code: 0 x 80070002.

    Let me know if you have any ideas how I can fix it.  My next step was to recreate this E directory and download the install.wim file and re start the installation.  I could not find the file install.wim well.

    Rob

    Hi Rob,

    I checked the link you provided.  What you downloaded was just the Vista recovery environment.  You cannot actually re - install Vista with that and if you blew your recovery partition unfortunately you may be out of luck.  You blew your partition containing Vista runs so the SFC will be of no help either.  I wish I had better news for you, but I don't see any way o get on without a Vista DVD.  I have good news for you if.  When you get your HP drive if you have problems with the installation, we will be able to help you with that.

    Take care and let us know if you need assistance when the disc arrives. Locutys of Borg

    Resistance is futile

    If you don't succeed the first time skydiving probably isn't for you!

  • Try to install the new copy off error vista WINDOWS CANNOT OPEN THE REQUIRED FILE 0x8007000D

    OT: Hey tried down laptop restore none tried to install the new copy off vista prem with no joy only error 0x8007000D WINDOWS can NOT OPEN THE REQUIRED of joy

    Portable Hi down tried restore none tried to install the new copy off vista prem with no joy only error 0x8007000D comes WINDOWS CANNOT OPEN THE REQUIRED FILE of joy

    Hi jamesgillwn,

    1. when exactly you get this error message?
    2. what disc do you use to reinstall?
    3. What is the exact error that appears when you try to start?
    4. at what point of the installation you get the error message?

    After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

    First check if you have scratches or dust on the disc and clean the surface and try again.

    To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

    Try the steps from the following link:

    Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

    http://support.Microsoft.com/kb/930984

    Note: When you perform the installation, you will lose the data, make sure that you need to backup your data before you perform the installation.

  • Windows cannot access the specific file, you may not be authorized

    I get a message (windows cannot access the specific file, that you will not

    authorization) it comes to my Bernina software.  I've been using this software for 10 years

    Hello

    Have you tried running the program by right clicking > select run as administrator?

    You want to reinstall using the same method of click with the right button on the install.exe or setup.exe > select run as administrator.

    See you soon.

Maybe you are looking for