Insert the .dll file Ocean Optics Jaz
Hello
I want to use the package of spam (Ocean Optics) in Labview 2009. But I have no idea how use the .dll file in Labview. I already found tools > import > shared library.
Insert the SPAM32. DLL file. But in the same menu, you must also insert a header file. But where can I found it? Or I do something wrong?
Could someone help me with this?
Stephan
Finally I found the answer
Tags: NI Software
Similar Questions
-
Must be quick, title says it all
Windows registry is responsible for the .dll files?
SFC shows SEVERAL DLLs not missing, no installation CD.
Not good recovery CD.
I have the copy of the registry before changes but online before browser support multiple and many BSOD.
Will post now as browser crashed early in post and the 5 th time in half an hour.Thanks for the reply Elizabeth23, but I finally found the part of the SFC.
SFC showed 167 system missing files - if you continue to press Cancel > continue every time SFC tells you to put in your Windows installation CD eveeentually happen to you at the end of his race - and I ran 3 times and each time got 167.
Now I had some of the 'missing' located in System32 .dll files, but some were also in i386 and the drivercache but I had not located a bit; but I knew that something is not right I had found some system 'missing' files and after that a few hunting came across a site that said to check the registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
CurrentVersion\Setupand under SourcePath my entry is a file that does not exist 'Temp' so I changed the entry to C:\WINDOWS rebooted and ran SFC/scannow and it scanned without stopping.
Weird as the registry key was in a file that is no Temp because I ran many SFC
times in the last 2 months and it always scanned all the files in the operating system without a hitch...My computer is still BSoDing out, had two after SFC took place without a hitch.
-
How can I open the .dll files?
Hello
I'm opening a .dll file, because I just downloaded drivers for a digital camera, and this is part of the process. The instructions tell me to click on this file to set up the installation. I had to open the .dll files before, and I could find a free, fast and easy for them on-line file opener. However, it bothers me, and I can't find another fix "free, fast and easy. Can someone refer me to such a? So, I would be very happy! I try to install the download and the first step is to open this file: Setup. DLL I have Windows XP Professional with SP3.
Thank you very much!
Jenifer
You do not open the DLL files.
Please copy and paste the instructions you follow or provide a link. It is always possible that the instructions have an error and you should be by double-clicking the installer. EXE.
What is the brand and model of the camera?
Note that instead of connecting your camera directly to your computer, you may prefer to buy a card reader (if your computer or printer doesn't already have one) and just take the card out of the camera and read directly.
-
Ho I replace the dll files and run codes such as the double-click to open
How to replace dll files and run codes such as the double-click to open
Hello
1. What are the dll files you are trying to replace?
2. Why do you want to replace the dll files?
A dynamic library (DLL) file is an executable file that allows programs to share code and other resources to perform specific tasks. Microsoft Windows provides DLL files that contain functions and resources that allow Windows programs to work in the environment with Windows.
-
Windows 8 - save the .dll files
Original title: salvation
Hi I tried to register the dll files to cmd, but some of them gave me an error 0x80070005 so how can I fix in windows 8
Windows key + X and select command prompt (Admin), then you will have administrative approval.
-
Cannot transfer pictures from camera to computer PTPUSB. The DLL file is damaged?
I bought a new Canon camera but not geet the computer recognizes the camera to transfer images from the Canon on my computer. I called Canon and they said that my PTPUSB. DLL file is damaged. Does anyone know how I 'ONE' corrupt? The camera works fine on a Mac laptop, so I know that's not a problem with the camera. Please help, my Disney World photos are taken trapped in my camera.
Try this first to make sure that the problem is not the result of the activity of malicious programs.
It is always sensible in this situation to achieve a malware check
Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
http://www.Malwarebytes.org/Download and run SuperAntiSpyware (Free Edition)
http://www.SUPERAntiSpyware.com/download.htmlSome malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/ -
I'm missing dll files and I downloaded them and I still can't reinstall my printer all in one. 1:e; SIBCSP SCCBASE GPKCSP
This is the wrong forum. This forum is for the Vista installation. Please use the forum material and devices
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Hardware?tab=all
You probably need to register your dll, and these people are good at it. When you repost remember to give more details, as the brand and model of your printer. You should also check the support site for the manufacturer of the printer.
-
How to bring back the .dll files to its original state?
Hey there's good people!
Today by chance I opened a DLL with notepad now all my files are changed in the Notepad file. How can I get my dll file returns to its original state on how it was before? Where I could see the two bolts of small image on each dll file?
Thank you very much!!
0ne love
Vally Pally
Try a system restore to a Date before the problem began:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
Insert the audio button wants me to insert the image file instead (glossary in Cp7)
Hello
I'm new to Captivate, but I'm trying to do something very simple.
I am creating a glossary (interaction) and when I double-click on the definition, I can choose to add audio or add images.
The problem is that when I want to add audio and find the file, the window says "select the Image of the library". If I select an audio file in any case, it says that the file type is not supported.
If I try to add an image by choosing the Add image button, which is not a problem.
I encountered another problem with Cp 7 in the short time that I use (issue has been resolved by a forum but no one can say exactly how much). This version has a lot of bugs? I guess adding audio to the glossary would be common that so maybe I just downloaded a bad copy of the Cp7 somehow.
All advice appreciated.
Jacqui.
Hello
I inserted the audio using the same dialog box. You just need to select the sound file in the dialog box Select the picture from the library , and then click OK. It works very well.
Here is the screenshot.
Anthony
-
Error when you try to insert the bitmap file
Hello!
I have a problem with the symbol editor in Multisim 11. When I try to insert a bitmap the entire program crashes.
I would like to have the symbol Opamp in multisim. See: http://commons.wikimedia.org/wiki/File:Normsymbol_OPV.svg
How can I do this?
Thank you!
mikcon
Hi Mikcon,
I have install Multisim 11.0 take your symbol and resize it and saved as a bitmap.
Then I opened the component wizard and try to create a new component with your symbol of OPV and everything works fine without errors or accidents.
Here some screenshots for you:
So most likely your Multisim Installation is corrupted.
Please try to repair your Multisim and again test this issue.
Kind regards
Oleg Scherling, mengg | Engineering applications. National Instruments | NIG. | -
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.C:\Windows\System32>CD "C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX"
C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX > del AcroIEHelper.dll
C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX\AcroIEHelper.dll
Access is denied.C:\Program Files\Fichiers Files\Adobe\Acrobat\ActiveX >
Hello
· How do you try to uninstall Adobe reader software?
I suggest to reinstall the Adobe reader software, then try to uninstall it again and check if it helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Also, the article below and check if that helps:
http://kb2.Adobe.com/CPS/402/kb402867.html
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
How to insert the audio file (drive) to the web page of Muse?
I am designing a web page in Adobe Muse CC and how do I insert music to the web page file, so I can be played? GisliG
Hello
Please visit the following link Re: how to add audio in Muse (not in background)?
Kind regards
Aish
-
With the help of Ocean Optics Maya with LabVIEW
OK, if it works with the OO, OO original driver software is always installed. You MUST uninstall the original drivers of OO, THEN install the driver of OR. The best thing to do is:
(1) with the spectrometer connected, go to Device Manager in windows
(2) right click on your spectrometer (it must be somewhere in the Device Manager or it wouldn't work with the OO software)
(3) select "uninstall."
(4) disconnect the spectrometer
5) go on your desk (or appropriate folder) and click on the OR condition INF file you have loaded down
(6) select install
Sheet 7) in the spectrometer, accept all the defaults, and it should now appear in the Device Manager in "NI-VISA USB Devices".
You should now be able to see your spectrometer in MAX. WARNING! Once you have done this, the OO software will no longer work. BE SURE you need not OO software before following these steps.
JasonP - CLD
-
Try to install Office97 on my Vista PC. I get the message "this application using CTL3D32. DLL which has not been properly installed. CTL3D32. DLL must be installed in the Windows system directory. "I did the CTL3D32 in my registry and do not know how to get it in there? Help :)
Office 97 is no longer supported by Microsoft.
And above his side of Vista compatibility is: recommended measures, to pay the upgrade.
For further questions to the office:
http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx
Office newsgroups
Discussions of general issues of the Office.
They will help you with your office questions in the newsgroups Office above.
See you soon. Mick Murphy - Microsoft partner
-
retrieve the missing dll files in Vista
After starting, I get the messsage App Data\Roaming\new not found next.me\nengine.dll. As a result, the system blocks whenever it accesses a new screen after an early upward. How to restore this software? I have a recovery disc I made when I bought the PC in 2007, but no instructions on how to use it.
I now run malwarebytes and hitman. The results were not going as I was expecting from your instructions, but maybe it's because I tried malware a month ago but was reluctant to use without a recommendation. As a result, that my trial period has expired but he stll allowed me to do a full scan.
Malwarebytes reported 524 detected objects, but did not provide that they be withdrawn instead, it offered hibernation (maybe not the correct term) I chose to accept.
Hitman has identified 1 threat and 1 highjacker. and 67 pieces of malicious software. It also identified that a file does not exist - AppData\Roaming\Dropbox\-exe. It looked a lot like the file which has been identified as being absent whenever I logged on. He offered a repair option. I took the option to repair the file and remove malware.
I rebooted (twice) and the message that the dll file is not found no longer appears.
On this basis, I am happy to record a success and thank you for your help, expertise and patience.
It leaves me with a problem of what to do about the future with regard to protection against malware. It seems to me that my current anti-virus software is not fit for purpose. I am drawn to using malwarebytes and hitman, but I intend to completely change my COMPUTER (hardware and operating system) resources when my course ends in September, I won't take any short term decisions of others to pay attention to everything I do and what I have access.
So thanks a lot for your help.
Maybe you are looking for
-
Hi, when you send an email using the mail my signature seems to drop before my email is considered by my beneficiaries. This does not happen all the time but often. Is anyone else know / encountered this problem? If so help to rectify this would be g
-
HP Officejet Pro e-all-in-8620: unable to print on the printer 8620
I installed the printer and e-print ok since all devices work. Wireless printing function works well for all my other computer (windows 10) except that I can't get my Sony SVT131A11L computer to print to the HP 8620 wireless. My Sony computer will pr
-
Launch by development OI program
Is it possible to programmatically launch the development of a standard IO (as if I double click the icon of TestStand)? I could of course do this with a system running call, but I'm curious to know if it is feasible for a real TS API call.
-
Aspire 8951G 10 Windows upgrade, Wireless does not.
Updated our Aspire 8951 G to 10 Windows. Wireless no longer works. The advocatus revealled running: Windows sockets registry entries required for network connectivity are missing I downloaded the latest drivers wireless here: http://us.Acer.com/AC/e
-
HP Envy 5660: HP Envy 5660
Just bought HP Envy 5660. Everything went well with setting up until I tried to print something. Get the error message that the color cartridge is not installed correctly. Out & back several times, but always get the same message. Any ideas? I use