Windows 8 updates installation showdown PC and now the drive is locked. How to unlock the drive?

Similar Questions

• updates installed live mail and now the spell checker does not work

  updates installed live mail and now the spell checker does not work

  You will find support for Windows Live Mail in this forum: http://windowslivehelp.com/forums.aspx?forumid=b91657c9-9031-4406-a398-7d0783119bb7

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I've just updated to 30.0 and now the browser window is reduced by half.

  I've just updated to 30.0 on my laptop. I've never had problems before and now when I open Firefox the browser window is reduced by half. I closed and reopened the browser and have even restarted my computer and I can't find something in the settings. I can't do what I usually do with the window this small.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Cannot install updates kb982168, kb2756918, kb2789643 and now the updates for other programs say there is an error (fail), (as the turbo tax)

  This has happened after that the volume of messages C is dirty, rebooted now what is happening

  I would recommend that you manually download the update from the Microsoft Download Center. Search the Download Center for the KB number or download your update from the following links:
  MS13-004: Description of the update of security for .NET Framework 3.0 Service Pack 2 on Windows XP and Windows Server 2003: 8 January 2013 (KB2756918)
  MS13-015: Description of the update of security for .NET Framework 2.0 Service Pack 2 on Windows XP and Windows Server 2003: 12 February 2013 (KB2789643)
  Description of the update rollup for the .NET Framework 3.5 Service Pack 1 on Windows XP and Windows Server 2003 (976765, 980773 and 976769): June 8, 2010 (KB982168)
  Once you have the downloaded update file, run the executable with administrator privileges to avoid any permission to hiccup.
  Recommended if you can't always install the update, the next steps are to reset the Windows Update components or an update of the file downloaded a new attempt after performing a clean boot or boot without failure. A clean boot or Mode environment safe is important to ensure that there are no other programs that may be locking files or otherwise interfere with the upgrade process.

  How to reset the Windows Update components?

  How to configure Windows XP to start in a "clean boot" State

  Start your computer in safe mode

• Updated 7 D Firmware and now the manual modes do not work

  I have just updated the firmware on my 7 d to version 2.0.5 and after doing so my manual modes do not have an image. My shutter will open, but does not shut down and does not have the image. My fully automatic mode (green square mode) done. I tried several times to reinstall the firmware without result. I was wondering if there is something I don't understand. If someone could help me I would appreciate that much. Thank you in advance.

  Thank you guys for your replies, but I solved the problem. First of all, I just wanted to say that I have use a Firmware update CF card. Actually, I didn't know it was possible to do it on my computer until last night just after I had copied the file .fir on the map see I wouldn't even when the drive from the computer. For me, it just seems more logical to install from a right CF card in the camera, rather than do it from a PC. But as I told before for some reason, after the update, some of my custom functions have been changed and it was just my 'Mirror Lock' that has been activated. Once I disabled it, it works perfectly now. Although, I did a reset and have to change all my settings back to the way I had them before and recalibrate all my microphone settings for EACH of my lenses (WITH and WITHOUT my 1.4 x and 2 x extensions) using my InFocus programme on my laptop. Declined just to inform you all I fixed it and it was my problem to the case where someone else fell on this. Thank you again for your time and your answers, everyone. It is much appreciated.

• Update of Photoshop CC and now the Control Panel tool is missing. How can I restore Panel tool?

  Windows 10.

  Yesterday Photoshop CC asked if I wanted an update.

  I said yes, now I can't find the control panel of the tool that used to be to the left of my screen.

  How can I get that back?

  Menu of the Photoshop window > tools (near the bottom)

  The new Photoshop you give a splash screen, so if you open a file, you should see the workspace.

  Let me know if this helps.

• updated connections 5 access and now the quick access keys do not work...

  anyone else having this problem?  anyone with a fix?   I uninstalled the screen enlarger and reinstalled with system update, but no dice... I think that they stoped working after I upgraded to the version of dial-up connections 5, if I uninstall to reinstall Access, is - connections this going to lose my settings?

  Thank you

  Doug

  You can try to install the drivers HotKey, should do the trick

• Windows install the latest updates on my phone and now I can't access the internet

  Windows Installer automatically of updates on my computer and now even if the system connects to the wireless network and I have only local access he has no internet access.  I tried both with the wired and wireless options and nor will not work.  Everything worked fine until the update system - do not know if I have to do a system restore to when he installed updates (I tried to restore to a point a few days before the download, but it failed) or if I should try to uninstall updates.  While I am not very confident with the work on the computer would like some advice on the best way to go.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Cite your version of IE and the full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) during the validation in an IE specific forum or a newsgroup. Please do it in your next reply.

  By "The Internet began" do you mean that you encounter errors Page can not be displayed ?

  Updates have you installed just before this problem started? Have you installed an update of the third-party driver that is offered by Windows Update?

  TIP: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista - I recently updated my free dongle and now its loaded and saved with a mistake,

  Original title: salvation

  Hi, I have recently updated my free dongle and now its loaded and saved with a mistake, he says that he cannot find converter or something. It won't let me not uninstall what it cannot find it in the library.  How do I get this completely removed? I even tried system restore but its still always on, I have completely removed before but can't remember how I did it

  Hi, I have recently updated my free dongle and now its loaded and saved with a mistake, he says that he cannot find converter or something. It won't let me not uninstall what it cannot find it in the library.  How do I get this completely removed? I even tried system restore but its still always on, I have completely removed before but can't remember how I did it

  Hello. Please download this free uninstaller.
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  and remove the software and reinstall and check.

• There are 4 Windows XP update (KB2446704, KB2418241, KB979909 and KB82168) with problem

  There are 4 Windows XP update (KB2446704, KB2418241, KB979909 and KB82168) that no matter how many times I install the (via Live update or the Microsoft update site) and successful installation message indicated, as soon as I turn the computer (allowing updates to install) and turn on again, such updates recur as I never installed them before (this happens now not more than 20 times). I don't know what the problem is and it became a nuisance.

  Hello

  1. you receive messages or error codes?

  You can read the following article and check if it helps:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Hope this information is useful.

• Try to update Java, Adobe Reader and now RIM Blackberry Desktop Manager, Error 1606 could not access network location.

  I got this error for a few months. Initially, I came across it trying to update Java, Adobe Reader and now RIM Blackberry Desktop Manager.

  The specific error is "Error 1606 could access the network location:.", with the colon and the dot at the end. Therefore, it is difficult to know exactly what registry entry, it's.

  I tried to change various registry keys and using a number of files of Microsoft "Fix it for me", but the error remains.

  Can someone help me please identify the location of the network that weird symbols ":." to refer and possible to put an end to this problem once and for all?
  I'd be happy to re - try fix if proposed as a possible solution.

  Thanks in advance.

  Hello

  1. What microsoft fix it did you try?
  2. don't you make changes on the computer before the show?

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  The steps to correct this problem involve editing the Windows registry.

  WARNING: this method contains steps that tell you how to modify the registry. However, serious problems can occur if you change the
  Register incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it.
  Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
  a. Click Start and typeregedit in the search box start and press to enter.
  b. find the following registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
  c. remove the entries that show the path that is listed in the error message.

  You can also consult the steps in knowledge base article provided assistance:
  http://support.Microsoft.com/kb/886549

• Download Windows 10 updated, it is 99% and hangs there.

  Original title: Windows 10 Doiwnload

  Download Windows 10 updated, it is 99% and hangs there.

  I left the computer now for about 14 hours of the night, but is still 99%.

  Help please.

  If it is just the download bit and haven't started to install anything yet, then you can try the upgrade by using the multimedia creation tool - https://www.microsoft.com/en-us/software-download/windows10 and see if this method is not better.

  Its always wise to backup everything first (at least all your important data - docs, bookmarks, videos, music, emails etc.) before upgrading the OS. Although they must all be left in place, if something goes wrong they may be. If you have a backup, you can find them. If you do not, you can't.

  Also, follow the UPGRADE path listed in the article for the free update, not the own installation path.