Windows 8 upgrade - slow WiFi

Similar Questions

• I was offered an upgrade of windows 10 on my laptop that is running windows 7, but my wifi button was not working when I installed 10 windows so I started 7 what can I do?

  Hello

  I was offered an upgrade of windows 10 on my laptop that is running windows 7, but my wifi button was not working when I installed 10 windows so I started 7 what can I do? It is an Acer Aspire 5920 G (old enough)

  Thank you.

  There could be a problem with the wifi driver that comes with Windows 10. I think that you first need to find the right driver for Windows 10 on the Acer site. Otherwise, you may need to install a usb wireless card.

  Thanks for reading.

• When you try to upgrade my wife 8 to 10 of Windows Lenovo desktop, I get a message of Error 0x80072EFD-0 x 20000.

  When you try to upgrade my wife 8 to 10 of Windows Lenovo desktop, I get a message of Error 0x80072EFD-0 x 20000.

  Anyone know what this problem is?

  BTW... She's got 500gigs of space

  Gordon

  The operation has timed out. This can happen if the computer is not connected to the Internet. To resolve this issue, follow these steps:

  • Start Internet Explorer, and then make sure that the computer has an Internet connection.
  • Go to KB836941and run the Fixit package.
  • Try to upgrade to Windows 10 once again.

  If you still receive the error message, check the firewall settings and make sure that the following Web sites addresses are allowed through the firewall:

  http://*.update.microsoft.com
  https://*.update.microsoft.com
  http://download.windowsupdate.com
  

• Slow WiFi with Broadcom 4322

  After upgrading my laptop HP DV7 with Windows 8, I found my wireless connection was extremely slow. My card is a Broadcom 4322AG. This seems to be the same problem as has been in the forum

  
  Slow WiFi with Broadcom 4322 and Windows 8 CP.

  Following the advice in this forum, I changed to TKIP AES security and everything seems to work properly.

  Thanks a lot for sharing your solution! My problem was that I downloaded at least 1 Mbit/s and transferred approximately 15 Mbps. Then I changed to TKIP, just as you said and now I'm moving 21 Mbps of download and 19 Mbps downloading. All this on a MacBook 5.1 :)

• slow WiFi with 7.6.7

  I have the extreme of the airport which has been upgraded to 7.6.7.  Since upgrading my wifi connections are slow.  If the 2 devices are on the wifi at the same time the second device running very slowly.  This problem did not exist before the 7.6.7 upgrade.

  How can I fix this problem?

  Have you thought to go back to the previous version of the firmware as a possible solution? Or do you want to try it first to other things?

  Users discover that the firmware update will not fix a problem that they did not... but sometimes, it will create a new they had not before.

• First of all this, switch to 8.1, but the store staff MS told me that they only treat 10 windows to upgrade.

  MS staff informed me that my slow pc needs to improve and its current version is vista Home premium.  First of all this, switch to 8.1, but the store staff MS told me that they only treat 10 windows to upgrade.  So, I stuck, please help.

  The audio output device also has red X on the "speaker" icon.  Please kindly help.

  I took these lines outside where you inserted in your "reply by quoting.

  "Please, help how to check manufacturer."

  "I still don't know how to change due to learning disabilities.  Please kindly help. »

  First thing to do is to see if the 8/8.1 drivers are available:

  Check the manufacturer of your particular Web site:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

   

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

   

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

   

  ASUS:

  http://www.ASUS.com/support

   

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

• Acer Windows 7 upgrade kit does NOT work!

  Hi I have an Acer Aspire 5538 (4 GB of RAM and 220 GB of memory) I'm trying to upgrade to Windows (vista and both are family premium). I read elsewhere on the site that someone had the same problem as me and earasing everything on computer seemed to have worked according to your suggestions (so I did and put everything on my USB). Later, I used the "dics ghost" factory, which deletes the database from the computer to the factory settings. So I'm trying to upgrade and the first CD has worked well "Acer upgrade disc. Now, when I put in the second one it says that my pc is not compatible, and that my pc must be x 86 (32-bit) or x 64 (64-bit). I went into the "system information", and it clearly states "x 86 based PC" until I do?. The second disk named: "Windows 7 upgrade media" does not work!

  Even I am confused. Tell you what, download Windows 7 Home Premium. ISO image, burn it to a blank DVD and use your product key to install and activate it.

  Windows 7 Edition Home Premium x 64 (64-bit)

  English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Download and install burn ISO Gear (free):
  http://www.GearSoftware.com/gear-ISO-burn.php

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

  ------------------------------------------------------

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the system drive, click on remove (DO NOT remove the recovery when it exists)

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

• Vista Home premium OEM Windows 7 upgrade

  Members of the community of dear MS,

  I have two laptop PCs, they are all two Dell Inspiron 6400 and 1525 running Windows Vista Home premium.

  I intend to have these two computers, but both work very well while they are slow.

  I think Windows 10 upgrade because I am convinced that the operating system can give the best operation of resources even with older components.

  Before moving to Windows 10, I need to upgrade to Windows 7 so that I can get a free upgrade for Windows 10.

  Given that my two laptops are the OEM of Vista Home premium version and the Dell product key does not work to activate Windows 7.

  Can I ask for help to advise what I can do now?

  If I need to pay for an update to obtain Windows 7 Home Edition Basic, can advise please how I can pay for it.

  Thanks for your help and advice.

  Best regards

  Brian

  It is not sensible to buy a license and upgrade to Windows 7 just to get the free update of Windows 10.

  Just buy Windows 10 GB of the full version of the GET (you will need two licenses), and then perform a custom installation:

  Buy Windows 10:

  http://www.microsoftstore.com/store/msusa/en_US/cat/CategoryID.70036700?=en_US_Store_UH_software_Win

  then

  How to: perform a customized Windows installation

• Can I install my [Upgrade Windows XP] [Windows 7 Upgrade] - to - [Windows 7 Upgrade]?

  On both computers we got at home (my wife and me)

  We both had Windows XP it Upgrade (Legit)

  Was wondering if if I can * PRE-ORDER 2 Windows 7 UPGRADE * and well... upgrade from my current windows xp.

  If yes I will preorder 2 copies today... always thought that you needed a full version of the operating system to use an upgrade after... perhaps things have changed... Hope so.

  Thank you already!

  J..

  (1) you can upgrade from 32-bit to 64-bit with a clean install if:

  a. your device supports a 64-bit environment and,
  b. you realize that there are still not 100% 64-bit support is quite possible for you to have the software in your possession that don't run in an environment 64-bit, forcing you to spend more money on the software. Honestly, the only difference between the environments of 32 and 64 bit is the maximum RAM capacity. In 32 bit, you can run up to 4 GB of RAM, 64-bit, you can run up to 128 GB of RAM.
  (2) Yes, both versions are included in the installation media, however, you will need to boot from the DVD to change your Monogram ILO since if you try to run in Windows, it will detect your Monogram bit 32 bit and don't allow you to install the 32-bit version.

  Jonathan Matthis aka "7test" on MSN QnA
  Chief Administrator of the Site
  Windows 7 QnA
  http://Windows 7qna.ning.com

• We bought a new computer with Windows 7. Can I sell the box Windows 7 Upgrade CD that we used for his old computer?

  Computer of my wife is dead, so I did a new one supplied with Windows 7 already installed.  Can I sell the box Windows 7 Upgrade CD I bought for his old computer?  We no longer use this license - we pulled the hard drive of the old computer OS and make it like a secondary on his new computer.  If the license is no longer used by us - or it will never again - but I do not know if someone would experience difficulties to activate if they we bought because I do not know if we can 'turn off' the old license.

  Yes, you can sell it, you will need to inform the seller that they may have to use the phone activation because it was already in use:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Slow WiFi

  I have a slow WiFi connection. I use a newer MacBookPro and have no ethernet to make a direct connection. I had a router to the South, but just before he went to the South, I was getting 220Mbps down speeds and I just got a new modem D-Link and he got setup one moment I'm stuck on 23Mbps. My other MacBook which is oldest to 125Mbps downwards. My desktop Mac mini becomes the same as my remarks 23Mbps Pro. If I connect directly the mini I get a compatible 220Mbps speed. I've been with comcast today and they don't see any problems with a direct link and 220Mbps, and my other book on wifi getting an Im 123Mbps sure that the issue isn't with comcast. I don't know what settings are now the speed down. I know that this is not the new router either because I have an old router which is at the same speed but the router that went towards the South allowed me to get the 220Mbps via wifi when it was working fine. The D-Link is new and seems to be ok. My other was a router Netgar N900. The D-Link is the AC-3150, a pretty radical router. The interface is a bit different, but it has the same information as the other routers.

  IM pretty good setting up networks, but this one has pulling me my hair out.

  I can't connect directly, otherwise I'd do it but why with a laptop. I also connected directly with my mini and who then shared and still only got 23Mbps speeds. My service is minimum 150Mbps downwards.

  Someone has an idea of what might be wrong. I reset and rebooted several times. My connection is DHCP but I did no changes using this or static. I checked the settings between the two laptops, and there is nothing else that I can see.

  I need help.

  Pete

  Fixed a problem. I have the new D-Link AC3150 Ultra WiFi router. It is supposed to be an intelligent router that gives you the best radio for the fastest speeds available. Maybe it's not so smart after all. I disabled the smart function and configuring a dual network. One for the other for 5G and 2.4 g. I put the 2.4 for older speeds and 5G for speed N/AC Protocol. After setting this up, I chose the 5G network and now my speeds are shouting along to 224Mbps and solid as a rock.

  Other than to be not so smart at least on a Mac platform I see no problem still with this router. I will pass along this information for D-Link. If you purchased one of these and your speed is way slower than expected then you need disable the smart function and have just two separate networks. Catch 5G as it is young, but don't forget that you only let the speed N or AC. Don't let not default on older slower speeds.

  Pete

• Upgrade module WiFi mid-2012 MBP?

  Hello

  I have a MBP mid-2012 13 inches and I've already updated the memory, ssd and battery.

  I would like to know if the Wifi module is upgradable?...

  I currently have an 802.11n Wifi module that I wrapped up as upgrade to Wifi-ac

  Interfaces:

  EN1:

  Card type: AirPort Extreme (0x14E4, 0xF5)

  Firmware version: Broadcom BCM43xx 1.0 (7.21.95.175.1a6)

  MAC address: 5 c: 96: 9 d: 8 d: af:ef

  Locale: FCC

  Country code: U.S.

  Supported PHY modes: 802.11 a/b/g/n

  The supported channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165

  Wake On Wireless: support

  AirDrop: support, channel 149

  Status: connected

  Map of the airport is certainly available in this model:

  oth https://www.iFixit.com/Guide/MacBook+Pro+13-inch+unibody+Mid+2012+Airport-Blueto + Board + replacement/10363

  However, newer Mbps AC cards are of a completely different form factor, so I doubt that they would work. I've not seen any internal third party replacements offered at all speeds.

  There may be an external option, like this:

  https://eShop.MacSales.com/item/Edimax/EW7711MAC/

• Windows 8 upgrade - support for Toshiba laptops models

  Hi community

  If you want to know if your mobile phone is supported by Toshiba win 8 update, please visit this page:

  + The table below lists all Toshiba models by short numbers that are currently supported for the Windows 8 upgrade program. +

  http://EU.computers.Toshiba-Europe.com/innovation/generic/Windows8-matrix

  _ * Incidentally: * _

  If you are looking for specific * Windows 8 drivers * for your Toshiba laptop, visit the drivers of Windows 8 for the upgrade wizard page:

  http://EU.computers.Toshiba-Europe.com/innovation/windows8_drivers.jsp?service=EU

  Welcome them
  Tom

• HP Pavilion & "Windows 7 Upgrade Advisor came across a problem.

  Windows 7 would work on my laptop (HP Pavilion dv6132eu)?

  So I used "Windows 7 Upgrade Advisor" of the Microsofts. Which caused the error "Windows 7 Upgrade Advisor stumbled into a problem that your scanning devices. Upgrade Advisor needs to be able to scan your devices to determine whether your computer is capable of running Windows 7 ".

  The laptop is probably not good enough for Windows 7, why?

  I assumed, the Upgrade Advisor would tell me, what pieces of hardware is / are not specific to Windows 7.

  In a forum Technet, say, the Adviser is blocked by some HP hardware. Which?

  Best regards, Willem

  My problem has been resolved.

  Previously, the problem with "Windows 7 Upgrade Advisor BETA.

  I waited two months - now, I executed the Adviser again, resulting in "an important upgrade".

  And guess: update Advisor works like a rocket, finishing with a nice report with minor problems.

  So I think that the problem was a "Windows 7 Upgrade Advisor" - problem - not a HP computer laptop-problem.

• How can they take advantage of the Windows 7 upgrade option?

  The Windows 7 upgrade Option begins officially today that gives a free copy of W7 with Windows Vista PCs and laptops, and I wanted to know how I can take advantage of this offer when buying on the Toshiba site?

  Thanks in advance.

  Hello

  I searched on some pages of Toshiba for some details about this upgrade option and found the same pages published by Luke.

  It should be useful.

  Check it out.