Windows 8 wallpaper file path

Similar Questions

• C:\ProgrammeFiles\Java\jreb\lib\deploy\jqs\ff\...... \.. \.. \bin\jqsnotify.exe. "Windows cannot open file, path or specified device. May not be the appropriate permissions for access you to them. »

  C:\ProgrammeFiles\Java\jreb\lib\deploy\jqs\ff\...... \.. \.. \bin\jqsnotify.exe.

  Hello

  ·        When you get the error message when you try to open any application or randomly?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        You are the administrator of the system?

  Jqsnotify.exe is a Java Quick Starter process. By default, the location of the file is C:\ProgramFiles\Java\jre6\bin\jqsnotify.exe and the file size is 48 KB.

  By default, the jqsnotify.exe process loads automatically when you start your system. However, jqsnotify.exe is not an essential process and can be easily loaded manually if necessary.

  I suggest you follow the steps mentioned below.

   

  Method 1:

  I suggest you to set permissions for the folder and check if the problem persists. Follow the steps mentioned in the article below.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/?kbid=308421

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe"on Windows 8.1

  I've updated my OS to Windows 7 64-bit edition of Windows 8.1 pro 64-bit, and when you try to reinstall the software and the driver for my printer HP Officejet J4580 all-in-one I get all sorts of errors. It worked perfectly on Windows 7.

  I get the most common error is: System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe', as well as the facility is abandoned.

  I tried a lot of solutions from the HP Web site and these forums, but my problem is still there.

  I already tried the long solution presented here:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/install-error-quot-the-system-cannot-f...

  and

  http://support.HP.com/us-en/document/c04206080

  I even found the directory where installation has been decompressed and copied to the desktop, but the error persists.

  I need the complete software because I need to use my printer Officejet scanner, so I can't just simply print drivers.

  I need desperate help on getting this new work.

  Specifications of the computer:

  CPU: Intel Core i7 - 4820 K Quad-Core 3.70 GHz 10 MB Intel Smart Cache LGA2011

  : DDR3 memory / 1866 MHz Quad Channel 16GB (4GBx4)

  Printer: HP Officejet J4580 all-in-one; connected via USB

  OS: 8.1 Pro 64 bit Windows

  GPU: AMD Radeon R9 200 series

  I finally solved it by myself after many hours of pain.

  I clean any installation of HP from my computer using the HP Officejet software and driver removal utility:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-110151-1&cc=us&DLC=en&LC=en&OS=4158&product=3645100&sw_lang=

  After the computer restarts, I moved on the desktop, the installation directory unpacked that HP printer install wizard for Windows had previously downloaded and launched.

  I deleted all files in the directory %Temp%.

  I disabled McAfee antivirus real time and Windows Deffender analysis.

  I ran the setup.exe in the installation directory in my office.

  The installation is smoothly and completed. I have already tested the printer and all features function normally.

  I hope these steps help someone with similar problems to get the software installed.

• Under Xp, under the paper painted office, where are the pictures actually stored... I want to add a picture to the file in order to make my wallpaper... It seems that some are stored on the c: Windows and some in C:Window/Web/Wallpaper...which is right

  Under Xp, under the paper painted office, where are the pictures actually stored... I want to add a picture to the file in order to make my wallpaper... It seems that some are stored on the c: Windows and some in C:Window/Web/Wallpaper...which is right

  Under Xp, under the paper painted office, where are the pictures actually stored... I want to add a picture to the file in order to make my wallpaper... It seems that some are stored on the c: Windows and some in C:Window/Web/Wallpaper...which is right

  ===================================
  Simply open the photo that you want to use as wallpaper and
  choose... Set as wallpaper... from the menu.

  If you want to physically add the photo in the folder then
  It can be seen in the background list... Add to the
  following folder: C:Window/Web/wallpaper

  FWIW... If there are fewer than 100 pictures in your my
  Folder of photos... you can see in the background list. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Backup files Vista - "Windows could not find any backup sets [file path]."

  I have a Vista computer.  The hard drive broke so until I replaced it I backed up all the files on the computer to another computer running Windows 7. I did it in the backup and Restore Center.  I made a backup of files, not a full backup of the system (I've seen the full backup of the system mentioned in other posts, but that was not an option... maybe which is only available on Vista Premium).  In any case, I replaced the hard drive and then try to restore the files, but I get the message "Windows could not find any backup sets [file path]."  Anyone have any ideas?  Thank you.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck!
  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to move the FILE from one place to another and keep "Indexing" have to move to the unknown location so you can't discover its full file path? Windows instructions provide information wrong re: how to do this!

  Make a bunch of audio files, placed in a folder on my desktop. Files initially sent to RealPlayer to burn, but when finished burning CD and went to read a CD, folder got seized by Media Player, 'Indexed' and disappeared from the office. I'm a relatively new computer user, and I need to learn more about file paths, how to view the path FULL of a file on my computer and how to type (create) full path when I need to. The "Indexing" feature seems to erase this lesson for me, and after having spent four hours trying to find Vista instructions on "How to move the file from one place to another", I gave up! Windows 'Help and Support' on my computer gives wrong directions. It states that if I right click on a folder > properties, a dialog box opens with a tab by which I can move my account. There is no tab location here. I found locations tab when right click on the "Mobile" folder, but still no option to "move file". No idea what is the folder "Roaming" or why it's on my computer. I want my audio files in the My Music folder, but this place is "access denied." Don't know how to get the audio file it in any case, but if anyone has any advice, I would be very happy! Thank you. PS - I had no problem moving folders in XP. I don't like the idea that a computer is to decide where to put my files. I want to control where I put my files. I don't like the way search works under Vista. I liked the XP search companion better because, for a computer fool like me, it was really easy to organize and find files and folders and had an option specific to find audio and video file TYPES.

  Here is an article on how to move your personal folders in Vista: http://www.howtogeek.com/howto/windows-vista/moving-your-personal-data-folders-in-windows-vista-the-easy-way/.  If you're talking about the special folders (such as photos, Documents, office...), then here is an article on how to move: http://www.winhelponline.com/articles/95/1/How-to-move-the-special-folders-in-Windows-Vista.html.

  If you have trouble with the search after you move the files, then rebuild the index: http://www.tech-recipes.com/rx/2103/vista_rebuilding_the_search_index/.  Here is an article on how to use Indexing Options in Vista that may be useful for you: http://www.vistax64.com/tutorials/69581-indexing-options.html.

  If the above does not help, your problem seems to relate to the image of the files/folders and their interactions with Media Center (which operate on different other folders).  Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the people who specialize in issues of the image will be more than happy to help you with your quesitons.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 won't remember the last used file path

  So to this question, take the Gmail.  If you enter an email and want to attach a file, you click on join and Win 7 by default on the desktop, from which you access the folder you need.  It's very good... for the first time.  However, while she is supposed to be smart enough to be REMEMBER this location next time.  NOPE.  Win 7 keeps by default on the desktop, even if you attach a file and then IMMEDIATELY try to attach to another.

  Is there a solution for this?

  * original title - Windows 7 won't remember the last used file path.  Very frustrating *.

  It is not a particular problem with Windows 7, but the Internet browser.   We remember is no longer default path of Internet Explorer with the introduction of sandboxing Protected Mode.  Even Windows XP, using the results of this sandbox layout in this behavior.

  Your temporary solution is to use another browser, such as Google Chrome.  In the meantime, your comments that you want to have the ability to remember the last folder used in the browser is important in the future development of the browser.  Leave your comments here, please: https://connect.microsoft.com/site/sitehome.aspx?SiteID=136

• Windows cannot access file you will not have permission to access the item path or specified device.

  Windows cannot access file you will not have permission to access the item path or specified device.

  I have windows7 OS, I try to open any application above the display of error messages.

  Please help me...

  Thank you!!!

  original title: Windows cannot access

  another user account works fine.

  Then, your profile is corrupt.  Create a new user, copy documents and other profile corrupted on the new profile.

  Do not copy * all *-only things you have created.  (Except the shortcuts).

  Is the user profile damaged an administrator or standard user?

• Windows Media Player will not play music files - need to reset the file path

  I'm trying to access my music on an external drive (g) using windows media player. The player is looking for music in the E: drive, which is a separate external drive that my friend uses for its iTunes. How to reset the path to the file for windows media player? It gives me the possibility of rerouting individually paths files, but not a lot of re - routing. I have reset the default settings, reinstalled the drive external, even enabled/activated on WMP (of the Panel).

  I tried. The drive G:\ was included in the WMP library before this problem (and to make sure, I deleted and added it). Despite this, the paths for each song pointed toward the drive E:\.  I solved the problem by deleting all of your WMP library (not files) and restart the media player. The files were then reread with the correct file paths.

• How to edit the Windows Installer build system Path Environment Variable?

  My library feature vi uses appeal to post a link to a dll, the dll calls several other dll.  If I create an installation package and install and put all the conscripts of the dll in the Windows\System32 directory on a target program machine works very well.  I prefer to keep all the DLLs of the program in a subdirectory of the executable file.  How to change the variable path of registry during installation so that windows will use this path? OS is XP and Windows7.

  Hello

  and why don't you copy your dll (and other levels) in the Wondiws\System32 directory on the installation?
  There are options in the installer to do such a thing.

  Best regards

• You can put the date into a file path?

  My program written spreadsheets. I want there to be a new file daily, entitled the days date, then the data added to the end of the day. Is any way to get the date issued by a ' get Date / Time String "and put in the path to the function"write the spreadsheet"?

  As is - anyone can confirm that a file path in a file writing worksheet is to open the file and one to come is saving and closing?

  See you soon

  Sam

  This better?

  

  As red Rooster have already said, use vi "string of Format Date/time" to not prevent elements of DateTime stamps that you need and also to choose appropriate delimiters.

  Keep in mind that ' / '&': ' are not allowed in Windows file names!

  Also to keep track of all your files in a folder, it is best to name your files 'Year-month-day"instead of the standard ' Monyh/day/year' (for Europeans at least ). This way you can easily find any file in a folder larger.

  You have really two different folders? One of the files before noon and the other for files after noon?

  If so keep this code.

  If not, modify this code!

• Errro message "cannot copy file: path is too deep.

  Inequality on the what, why, how do to the error message "cannot copy file: path is too deep." I would like to know the causes and possible prevention and or all of the information available on this issue. The problem occurs when copying large files and sometimes small files on external hard drive to the top.

  Even though the file itself may become a 9-character file name extension, it could be buried inside several files.  Thus, when you step on your external USB drive and it appears as, say, M: drive, the number of characters in the complete path to the file starting with "M:\. "and including all of the directories in the path to the file as well as the number of characters in the name of the file itself must not exceed 255 or Windows refuses to handle.

  Robocopy is a command line program.  You must type in the command from a command prompt window (start-> Run-> "cmd").  It works by accessing the file using a set of routines to copy the different library that does not have the limit of 255 characters.  A documentation file must accompany Robocopy explaining how to use it.

  Another method that might work for you is to take the folder that your .wmv file is in (or maybe both files above) and to temporarily move to the root directory of your external hard drive.  This shorten the path to the file and allow a normal copy of work.

  HTH,
  JW

• Asking the user to select a file path to record data to

  Hello

  To improve the 'user interface', and the usability of my VI, I would like to have the dialog box "select file path" appears automatically, rather than create a user by clicking on an icon on the front panel to display the path of the file dialog. The 'order' of operations would be as follows:

  VI implementing--> Dialogue request to the user the name of the file--> VI adds automatically it appropriate extension--> traditional dialog windows 'save file' opens to allow the user to select the appropriate folder to save the file in--> rest of VI runs.

  I have everything other works independently to obtain registration of the file dialog is displayed automatically. Currently, the only way I can do that is to have the user to select the folder to save ahead to launch through the façade, but would like to remove this step and as soon as they clicked 'OK' on the previous dialog (file name request) have the "Save file/select the folder" dialog appear.

  Thank you

  I think you are looking for the file Express VI dialogue. Be sure to post if this isn't what you're looking for.

• What is this C:\Windows\ubomupewukuwu.dll file?

  What is this C:\Windows\ubomupewukuwu.dll file?

  I guess you ask because you get an error message at Windows startup on this file...

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• Error when printing from a memory card: "year error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found connection .This has not been restored"

  Original title: there is an error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found .this connection has not been restored

  error message for a memory card has it printed

  Hello

  ·        Have you been able to print from memory card sooner?

  ·        How are you connected to the computer from which you are trying to print?

  This occurs when a computer uses the network map to connect to another computer to share files.

  To fix this problem, do one or more of the following methods.

   

  Method 1: Control equipment

  (a) ensure that the computer with file sharing turned on.

  (b) ensure that a hub network or router is powered.

  (c) ensure that the cables are well connected.

  If this does not resolve the problem, go to method 2: ensure that network resources are properly shared.

  Method 2: Ensure that network resources are properly shared

  Share a folder on a drive, then connect to the shared drive, follow these steps.

  Step 1:

  To make a folder that is located on the accessible hard drive on another computer, follow these steps.

  (a) right click onStart and then click Explorer .

  (b) right click on the folder you want to share, clickshare , and then click share this folder .

  Step 2:

  To connect to the shared folder from another computer, follow the steps below.

  (a) clickStart , then click run .

  (b) in theOpen box, type \\computer\share (where computer is the name of the computer where the resource network and share is the share name of the shared folder on that computer).

  (c) clickOK .

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.