Windows 8 yourself run printer HP Deskjet 1056?
Original title: printer 1056
a windows mobile 8 can be connected to a printer hpdeskjet1056
Hi Fredy,
Welcome to the Microsoft Community forums.
Yes, HP Deskjet 1056 is compatible with Windows 8. You can go through the Windows Compatibility Center for more information by clicking on this link.
In addition, there are Windows 8 drivers available for this printer:
See the article on how to install a printer on Windows 8.
Install a printer
http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-8
Hope this information helps. If you have more questions, we will be happy to help you.
Tags: Windows
Similar Questions
-
How can I install Windows 7 drivers for printer hp deskjet 9300?
Original title: Hp deskjet 9300 device and windows 7
I would like to install printer hp deskjet 9300 witn lafenetre 7 and I CN not find driver.
If you can help me, I'd appreciate it.Hello
You can download HP DeskJet 9300 printer drivers from the following links.
If you have the 64-bit operating system, download the drivers from this link:
If you have the 32-bit operating system, download the drivers from this link:
To determine whether a computer is running a 32-bit version or the 64 bit version of the Windows operating system, see this link:
http://support.Microsoft.com/kb/827218
You can download the Manual of HP DeskJet 9300 printer from this link:
I hope this helps!
-
I don't find Windows 7 drivers for printer hp deskjet 970c on the HP website.
Hewlett-Packard doesn't seem to have a driver for this printer in windows 7
Hello
1. could you give us the model number full of this printer?I. find the exact model of your printer.
With the model number, you have given I was able to follow the two different printers HP Deskjet 970cse printer and HP Deskjet 970cxi Printer.
Here is the link.
http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=DeskJet+970C&submit=go+%BBII. download link for both printers.And two printers have Windows 7 drivers available. I have listed the links below to download the drivers.HP Deskjet 970cse printer range.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=60097&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20 A.b. HP Deskjet 970cxi Printer
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=61818&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20 A.III. information additional aboput installation of printers.
You can check the items below for additional help on hardware drivers and installing printers in Windows 7.a. install a printer
http://Windows.Microsoft.com/en-us/Windows7/install-a-printerb. find and install printer drivers
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
c. maintain a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyd. automatically get recommended drivers and updates for your hardware
http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardwareI hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
HP Deskjet 1056: HP Deskjet x 64 will not install on Windows Vista
HP Deskjet 1056 will not install on Windows Vista
Hello
Remove the complete software for printer. Download the latest drivers and software from link below and installation of ty.
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=372330&
-
original title: printer drivers
I have the driver for my printer but when I run the wizard tells me I need us the built in xp Printer Wizard to install the printer on this operating system. When I go to do this, it gives a fall to the bottom of the printers who does not understand my printer HP deskjet 9650.Is there a way do not use the Printer Wizard because I have the right driver. Only, it is not listed through the wizard.Hi michelledumont,
Follow the steps in the article.
Resources for the resolution of the printer in Windows XP problems
For reference:
How to install a printer driver locally for a remote printer in Windows XP
-
After that a virus clean my printer HP Deskjet F 300 quit working they installed Windows XP from Windows 2000 and I can't make it work help
"they have installed? You had somebody "clean" your computer and they have also installed Windows XP (you used to have Windows 2000)?
The first thing you need to do is to determine if 'they' a legitimate version of Windows XP installed. Download and run the MGADiag tool. If the tool does not report that Windows is "genuine", take back it the computer and demand that 'they' install an authentic version, paid Windows XP. While they are at it, tell them to install a driver for your HP Deskjet F300.
If you do not have a genuine version of Windows XP, then go to this page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=1128298
You have several choices to this page.- The top line, which only says: 'Pilot' is the complete set of software including software HP's Photosmart printer drivers and the scanner of your Deskjet. As the HP notes, this is a very large download, so if you want this package, you must have a high-speed Internet connection or order the CD.
- The second line, which says "Driver - Product Installation software" includes the basic print and scan drivers. HP has said, "not all product features are supported with this installation package." I don't know what "features" are not supported if you choose this option.
- It should not necessary the "Patch" because or the other of the first two downloads is dated after the patch and so should be included. After things are installed, you can download and install the most recent of the 3 "Updates".
When you wrote that the printer "will not work" after a new installation of Windows XP, I assume that the printer is not installed at all. Just in case, however, previously, you use the package that you download from HP, follow the instructions here to clean all traces of a failed attempt to install it. (Note: remember "Step 4".) "Step 6" refers to the directions outlined in the upper part of this post.)
-
Satellite L300 yourself running Windows 10?
I own a Satellite L300-1AQ. This laptop yourself running Windows 10. It is currently under Vista Home Premium
Yes, you can. Im running Windows on my L300-145 10.
-
Hi all
I hope someone can help me
I installed my printer Hp deskjet 2135 on my laptop Hp, 10 64-bit windows, but I can't print pdf and doc. files, I still have 0 documents pending on adobe and microsoft word.
The printer works when I print the test page to the doctor of hp and his work on other windows 32-bit computer laptop 10.
I tried to uninstall and re install and many soloutions here and on the microsoft forum, but nothing worked.
Please any help.
Dear Sir
Thanks a lot for answering
I tried every step with care, now the situation is:
I can print to adobe pdf and Notepad documents.
But microsoft Office isn't printing,
even I tried to change the setting from letter to A4 paper, and when I use the parameter A4, I got a massege of margins, excel tell me that there something wronge with the printer, in the letter not defining any masseges in both applications but still have 0 documents pending to (Administrator)
Any help please.
-
HP Deskjet 1056 (all-in-one) do not print all of a sudden
Thank you in advance for your answers and direction.
For some reason, I could not get my PC to print at all (no test do pages either). I just rebuilt my PC with Windows 7, I have done this literally 100 times before and have never encountered this dilemma. I installed the software from the manufacturer's Cd, all right. Installation was made initially with the USB unplugged and then plugged when requested by the software. Each attempt to print (including test pages) sends in Quebec City and then times out with a non-specific error. I used the printer software HP and doctor Scan and sometimes (I tried 4 times) it will be just "hang" on the field "communication with the device. Other times it crashes through showing all green checkmarks in this software not showing no conflict (this is while I try to print a test with no results page). I downloaded what I believe to be the latest drivers from HP (DJ1050_J410_1313). After you have uninstalled the original software CD, I installed the new drivers in the same way with still no joy. The last known response seen on my PC was the "door" was closed and had to be opened to print (it was the announcement several days ago). So, I seem to be communication, when I opened the inner door to access the ink cartridges during printing, the HP software warning me to close the doors to continue printing done burst upward (which was just my attempt at troubleshooting if there is a communication between the printer and my PC). I tried printing, Outlook, Word, Notepad, HP software, email (online) all with the same events that results. My printer is set by default. Also set on USB001 Virtual Print Driver with my usb port (how hard, it is connected to my PC). I have tried to change the main usb wire with another, still communication, but not printing. I'm not completely PC illiterate, but I have to admit no small degree of frustration and loss of meaning.
Any help would be greatly appreciated.
I tried just a drain of my registry to verify there is no conflict with drivers or double entries and found nothing. Cleaned all register the same and attempt to print a Word document and still the same results.
I realized I should explain some of the other things I've tried: restart the PC (twice). Restart the print spooler in Services. Back by unplugging the power cord and wait 15 seconds to connect. Dance a jig, walk around my chair... everything you can think back on this printer (well... maybe not that extreme, it feels just like that)
Thank you once again
Hi @mrewho
I know that this can be a frustrating experience, I'm happy to work through it with you. In a first time ice it seems you have done everything but yell at the Moon, I mean you did a jig, that should do the trick!
You have the printer USB cable connected to a 2.0 or a 3.0 on the computer port? I'm sure you know the difference, but for the other members of the community who may refer to our conversation of help, here's an image to see what to look for;
3.0 ports are supposed to be backwards compatible, but I've seen problems occur when they are used for printers.
If you are already connected to a 2.0 port we can try something else, I don't think not that you tried again, the printer Installation Wizard. I know that you have uninstalled and reinstalled several times between the jigs and indirect Chair, but have you tried the printer Install Wizard (PIW)?
If no, please uninstall your software again, then remove the server properties if driver is have not deleted during the uninstallation, then use the PIW.
- The new software - uninstall the printer software Instructions
1. in the folder "devices and printers".
2. choose "print server properties.
- Win XP - with no printer selected, click 'File' then 'server properties '.
- Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
- Windows 7/8 and 8.1 - Select any printer in the "Devices and printers" folder and click on "Print server properties" above.
3. click on the "Drivers" tab at the top of the window "properties of the print server.
4. choose the printer that you want to uninstall, and then click 'remove '.
5. choose "Remove driver only.
6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.
- Download and run the HP printer install wizard for Windows
-
I bought my wife an HP Deskjet 4500, the same as mine, but she has Windows XP Pro and I have Windows 7. The printer works like a charm on my computer, but my wife said a registry key is missing. What is a registry key and how to fix it?
It is important to know the exact model number.
Start here:
This is where you can get the latest XP drivers for this printer.
Regarding the 'certain registry key' you'll have to tell us the message that your wife is found!
-
Printer hp deskjet 1220C to windows XP SP3 drivers
Printer hp deskjet 1220C to windows XP SP3 drivers, exist?
Drivers rarely are service specific pack, just go to the HP website and download the latest Windows XP drivers for your printer.
John
-
I need a software/driver to use my printer deskjet 3900 series Windows 7; HP and Microsoft should help me please
Thank you
Well, I found this.
But the document is no longer available. Printer must be very old.
-
Can someone suggest a print to deskjet hp1280 driver to work with windows 7 (64 bit)?
Hello:
Please see if Vista x 64 driver works.
If this isn't the case, it's probably time for a new printer.
Paul
-
* Original title: windows 7 download
I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?
It has probably comes with Windows 7 Professional 64 bit.
You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):
How to: What are my options for Windows 7 reinstall media?
Make sure you scroll down and read the section:
What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?
You can also use Windows 10 too as you have the right to it as a free upgrade:
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
Hello
After upgrading to windows 7 Home premium 64 bit vista family premium 64-bit, I expected to be able to connect my EPSON Stylus D68 printer on my laptop and leave immediately. However, when I tried to do this installation constantly failed. Therefore, I went to the manual add the printer option in the menu devices and printers. However I met this error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or restart the machine,"after reviewing the existing forums on the issue, I tried to restart the services option. However, the restart option has been obscured and when I just tried to start then I met an other error message: "windows could not start the spooler on the local computer service, error 1053: service has failed to demand launch or control in a timely. more when I click Properties to the spooler in the description it says failure to read the description. error code: 1813. This is all very frustrating for someone who just wants to add a printer to his laptop computer. can someone please? because I am all of these ideas.
Thanks in advance,
Chris.Try runing the file system Checker to check the alteration of system files - 1 Option to follow in the folliwng link:
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html
Please go back to let me know if that fixes the problem, thanks. Fingers crossed!
Maybe you are looking for
-
When I turn on iCloud library in sync deleted photos?
I just updated my iPad 16 GB iOS mini 9 after cleaning of old photos, so there would be enough memory for the upgrade. I have around 200 photos sync'd with my MacBook. Why iOS these deletes if I turn on iCloud photo library?
-
I tried to install Windows XP Service pack 3 on my Tecra S3, and it fails (stops indefinitely) at the stage of "current execution after the installation process".I tried to do it via windows Update and also burning full ISO image, "Clean boot" mode,
-
Hey... I got this thinkpad R61 and now, I got this blue screen whit an error but cannot read it. It desapears before I can read it... now I can't boot the pc... Mabe it's something in the bios? a frind of mine has most around here and to recover the
-
How to create the restore disks
original title: how to create a system restore disks for my computer restore disksThanks, mb
-
step to create object VO 2 of 9
Hi experts jdev,. uses 11.1.1.5.0 - adfbc jdev I try to create new vo. and by giving his name amd select readonly access via the sql query. and I put this query. SELECT level1, level2, level3, level4, acct, acct_desc, DECODE (SIGN (