HP Deskjet 1056 (all-in-one) do not print all of a sudden

Similar Questions

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• My HP Photosmart C5180 all-in-one will not print text correctly in black, color print very well.

  My HP Photosmart C5180 all-in-One does not print black without be eliminated text or streaks in the text. Will print fine text color.

  Have tried all the "patches" you list and much more. The printer prints fine on my old PC Windows XP and worked fine on my

  new PC using Windows 7 until recently.

  Please don't tell me to... Reinstall, download the new driver, install the new cartridge, clean align the print heads, different paper or go to 'solutions '... Etc... Etc.  I HAVE ALREADY BEEN THERE AND DONE THAT!

  Everything you "patches" end with 'the unit of service... " WHAT IN THE WORLD WHAT THAT MEANS!

  This has been a nice printer for more than 5 years, but is somewhat glitch spoil me when using the BLACK INK?

  Gordon,

  Thanks for the reply, expecting not one, but what you say is all that we need to buy another printer if we did all the "fixes", etc... etc. you know that take a printer to a repair shop will cost more

  then buy a new one.

  It was stupid of saying me to check on the warraty of HP page when I already told you that the unit is 5 years old.

  But don't thank you for the reply... even if it was a joke!

• HP C4280 all-in-One will not print photos on any HP photo paper

  HP C4280 all-in-One will not print color or B & W photos on photo paper.  Color and B & W photos on plain paper prints.  It is used to print normally on all documents.  No change, I am aware of cause this malfunction.  Any suggestions?

  Open your printers folder and right-click on the printer and review the printing preferences. Set the media media photo here and in the application you are printing from. When you say that it will not be printed on photographic support what do you mean... the page is white? the quality is bad?

• HP 1315xi all in one will not print.

  Recently had to wipe my hard drive and reinstall everything.  I use Windows 7 (64-bit), and my all-in-one does not print anything from the computer.

  I downloaded the latest driver for the 1315 all in one series (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) from the Web site.  After that several unsuccessful attempts installation, following the troubleshooting guide, I was finally able to have it installed, but it still does not print.  It will scan and copy, but not reading as a printer.

  Help, please.

  Hello althor1170

  It seems to be a problem with the computer and the printer communicate with each other. Have you tried another USB cable or port? Have you tried setting the printer wireless or network? If he works on the network, then the problem is with the USB cable or port. You are using a USB hub?

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  Message: Script error...

  OK if you use IE9 32-bit

  Latest version of the driver from HPupdate

  Same problem on 2 different PC - running Win7 Home premium, another the proff of Win7, both 64-bit

  Hello borisgit,

  As you have noticed one solution is to run IE9 in 32-bit mode. You can also try running the 64-bit version of IE9 as administrator to work around this problem.

  Script error when you try to print from Internet Explorer 9

• HP Deskjet 3050 all-in-one: does not print copy or not

  A few months ago my printer has stopped printing. It print only the first line of the page and then spit out the rest of the blank page. At first I thought it was the program I was using because sometimes it would work in Word but not Adobe PDF, or vice versa. Now it prints even more than the first line, it just takes the paper and does not print anything on this subject. I tried:

  -Turning then in

  -installation of the driver more updated from the web

  -new ink cartridges

  -print a test page - that works!

  -copy - that does not work

  Another note:

  -I connect via a USB port to print

  Other troubleshooting tips would be appreciated, if not I throw and do not buy another HP printer again. Very frustrating!

  Hello there! Welcome to the forums @autley

  I read your post on the printing issues that you are facing and also how you can not make a copy. As you can not make a copy, it is a material concern. I have a few steps to offer you and if they do not fix the problem of the copy, please call us to see what are your printer options.

  Reset the printer, and then make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help greatly.

  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  Please try a copy from the front panel of the printer. If the working copies, please let me know and we can continue to troubleshooting of computer software. If the copies do not work, please call us!

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Happy new year

• HP officejet j4580 all-in-one will not print from the internet.

  My officejet j4580 all-in-one printer does not print all that I try to print from the internet, or in microsoft word.  I tried to reinstall, but it gets stuck at 94%, and it took almost 3 hours to get to this point.  What can I do?  My operating system is vista from microsoft.

  Hello

  Here are a couple of things to try.  I would first start by download and run the Diagnostic Print utility.  IF this isn't clear, then try the document on the internet printing problems.

  Print Diagnostic Utility

  Problems printing from the Internet

  See if one of these help.

• Printer HP 6210 all in one will not print computer

  My HP6210 all in one printer will not print from a computer that has Vista. My operating system is Windows. The printer worked fine with my old laptop that did not have Vista. However, as soon as I have my Phoenicia connected, which has Vista, it will not print. My computer doesn't work anymore so I need to use hers. What can I do to make it work? Thank you

  Beeky27

  Hi @Beeky27,

  Welcome to the HP Forums!

  I noticed that your HP Officejet 6210 won't print from your Windows Vista computer. I am pleased to see that for you!

  First of all, I would make sure that the full feature software and drivers are installed, by downloading it from this link: HP full feature software and drivers. Then I would run the HP print and Scan Doctor, to ensure that everything works.

  Let's start with these steps and go from there!

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP officejet 5610 all-in-one does not print one when it does print a map from 2 months ago.

  Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago

  Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago

  Who is this?  Do not print or print the old data?

  Under what circumstances does the former print job print (for example, after restarting)?

  Follow these steps:

  Open a command prompt window (start > run > cmd > OK)

  Type the following command and press ENTER after each line:

  net stop spooler

  del "% windir%\system32\spool\PRINTERS\*.*" [Y when prompted type]

  net start spooler

  output

• HP Officejet j3680 All In One will not print

  Does not print my desktop Hp Printer j3680 all in one! Help?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  ·                         ________________________________________________________________

  http://support.Microsoft.com/GP/printing_problems

  Read the information above from Microsoft about fixing printer problems.

  ·                         ________________________________________________________________

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• HP Photosmart 3310 all-in-one does not print print test page doe but doesn't show is not black

  I have a printer all-in-one HP Photosmart 3310 that does not correctly print a test page (print color but not black) and does not print a WORD document from my computer.  The color that should be black in the test page after CLEANING print head appears as a Purple-ish Brown, although after the PRINTER SNAP the printed page shows a short BLACK bar to the left of the five longer bars in FIVE COLORS.  The computer in use is a HP Pavilion dv7 with processor Intel Core i7-3610QM, 2.3 GHz, Ram 8. 0 GB (7.9 GB available), 64-bit and Win 7 Home Premium OS, SP1.

  After having downloaded HP Print and Scan doctor, we arrived, after a series of steps to "If the cartridges have been refilled and none is empty, try calibration of color": Open HP Solution Center (start, all programs, HP, HP Solution Center), then click on settings, settings, printer Toolbox, printing on the tab device Services, click on color to calibrate.  This procedure is NOT AVAILABLE, however, because I can't find the HP Solution Center.

  What should I try to fix this problem?  Please be specific - and please also include any recommendations for a remedy that is exactly what happens if something must be verified or checked before trying the recommended remedy.

  Since the last post, I repeated the test several in Solutions of HP.  Whenever I have repeated the procedure clean print heads, improve the quality of printing in black ink a little bit.  After several passages of this test, maybe 5 or 6 more and separated by some rest of the time, the quality of printing in black ink has reached the State that I consider finally acceptable.

  A variable that I can't rule out or rule through all this is the temperature and the humidity.  It has been a winter VERY exceptionally difficult, with a lot more than zero days and subzero temperatures.  And with that comes challenges with the indoor humidity (even if we have the whole House humidification).

  In all cases, the printer now works without problem.  And I'll post that I accept the solution most recently proposed by the HP Forum.

• Photosmart premium 3-all-in-one does not print black ink

  My C310 series 3-all-in-one hp photosmart print no black ink on the page.  The cartridge is new, and all ink cartridges are full.  The printer is 3 years, just one month out of warranty.  I downloaded all the updates, I'm sure and went to the website of hp troubleshooting page.  I followed all directions, twice and still no black printing.  Please help, I don't want to buy a new printer!

  Under Tools, I see only "Clean cartridges" not "clean print head."

  When I chose "Clean cartridges" twice, black ink printed!  Hooray! Once I have this post, hopefully get back to the page to say the problem is "solved"!

  Oh, while I have you on the line, while the cartridges were being cleaned, I got a message saying that I had to download the latest hp drivers, because those I have is not compatible with this version of Windows.  However, I download the latest drivers for 8.1 from your web site when I had a terrible paper jam.  After that I downloaded the latest drivers, this problem has been resolved.  But, given that I get this message re incompatibility, I need to re-download?  It was only a couple of weeks (up to three) that I downloaded the drivers.

  Thank you once again!

• How do you re - align a printer HP PSC 1400 all-in-one is not printing?

  Could someone show me please how to realign a printer HP PSC 1400 all-in-one not print after paper jam could only be released, with difficulty, from the front of the tray of the printer. Thank you.

  Hello

  You can do a hard reset with the printer. Be sure and remove the ink cartridge before unplugging the power cord. This will ensure that the cartridges to realign itself when they are inserted in the after that the printer invites you to do so.

  Hard Reset:

  Unplug the power cord from the printer and the wall

  Take out the toner cartridges.

  Wait for 30 seconds

  Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

  Replace the toners/cartridges in the printer

  Let me know the results