Windows adds copies of the files in a folder

Similar Questions

• I have 50 GB of data in C:\WINDOWS| Temp. Delete the files in this folder to free up disk space?

  The larger files in C:\WINDOWS| Temporary folders are 435 hidden files whose name starts with etilqs_ *. Total space occupied by those files is 50.1 GB.

  A little googling implies that these files could belong to a product called "Spiceworks" and that they have set long ago, so if you are currently using or have all used 'Spiceworks', don't forget not you use the most recent version and/or look in their an online community where you can find discussions.

• Downloaded 4 fonts on my computer and all the files unpacked, but says I have to wait until Windows is finished with the files

  I downloaded 4 fonts on my computer and all of the decompressed files. However, my computer telling me I have to wait until Windows is finished with the files. I made sure all Windows programs are disabled, but he still repeats the message. Why is it so?

  Hi Clarissa Tan.

  1. What is the complete message you receive?
  2. Which site did you download the fonts on the computer?

  Method 1

  I suggest you to use the link below to download new fonts on the computer and check if it helps.

  To add a new font to your computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fonts_addnew.mspx?mfr=true

  Download new fonts

  http://www.Microsoft.com/typography/fonts/

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you set up the computer in a clean boot state and try to install new fonts, check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Research of Windows 8 is rubbish, cannot find the files in a folder

  It makes me a little crazy.

  I'm looking on a list of files in a folder - I enter a search string that matches one of the file names, and still win 8 search tells me 'no element doesn't match your search' which is total garbage that I can see the file in the folder.

  I also noticed that as soon as I add a folder to the index, I can pick up is no longer the case! There where previously I would get some results, I then none after you add the file in the index list.

  What is going on!?!

  How to get Windows 8 to search my files in a folder? Really, is it that hard? I don't even mean the content of the file, just the names of files, and still win 8 search does not always work.

  Windows 7 search just worked! Why MS, why change?

  So now, I have to just decide if it's worth to give B a different drive letter. But thanks for pointing me in a useful direction.

  Probably not.  Someone else had a similar problem with a player that they had tagged A: and supposedly they tested using a different letter.  The problem was to search all access to this drive.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-TMS/Windows-81-file-searchindexing-not-working/d9288dad-e381-4D1C-8520-694e3b5e475a?page=1

  FYI

  Robert
  ---

• I can't access firefox, everytime I try I get that windows does not find the file, I tried it redownloading but he still gave me the same message?

  I can't access firefox, everytime I try I get that windows does not find the file, I tried to download again, but he still gave me the same message. the problem has nothing to do with my internet because it freaks on the internet explore and everythign is fine, just my computer can not access firefox for some reason any. I tried uninstallign it and then install again, but that did not work, I tried to install a different version and it still doesn't work.

  yesterday

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; MSDigitalLocker; FunWebProducts; GTB6; .NET CLR 2.0.50727; InfoPath.2; .NET CLR 1.1.4322; OfficeLiveConnector.1.3; OfficeLivePatch.0.0 .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

  I'm sorry, but you have not answered my questions.

  (1) on the last stage Setup lets you start Firefox, if you keep all of the checkbox "Launch Firefox now", turns on Firefox when you click on "Finish"?

  (2) how did you launch Firefox when you receive the error message? How do you 'by clicking on the freshly installed target Firefox.exe?

  (3) what is the exact error message? (Post a screenshot if you cannot re-type precisely). Text you have posted it lacks an ending quotation mark and does not resemble any message I know.

• of the Assembly's strong name validation failed "c:\windows\home\ehshell.exe". the file may have been tampered with or it was partially signed but not fully signed with the private key, what should I do?

  After I update to Windows XP SP 3 my media center has completely stopped working and it gives me following e: validation failure of strong name for the assembly 'c:\windows\home\ehshell.exe '. the file may have been tampered with or it was partially signed but not fully signed with the private key.

  What I would do.  I was grinding a lot and nothing has worked so far.

  Stone

  Please answer questions following diagnosis in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years?

• You received the C00D1199 error message using Windows Media Player. The file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player. »

  "You have received an error C00D1199 message while using Windows Media Player. The file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player. »

  The file audio im trying to open, a conference for a class I'm taking. Is there anyway that I can get the audio to play? program in windows media, itunes, quicktime player?

  Hello

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

  Note: This link implies also on Windows vista.

• Windows 7: put the files in a folder how to do this

  to put the files in a folder how to do this

  Hello

  As replied in the other thread we really need more information. What type of files in this folder.

  http://social.answers.Microsoft.com/forums/en-us/w7files/thread/1dd52f30-F909-4063-8355-b32e262d7495

  '' In general, '' you can use Start - computer or Windows Explorer to copy the files and put it
  those in the other folder.

  Techniques - click on a file - then hold Shift - click the last file in a series - all are highlighted
  -Right click on COPY - go where you want to put it-right click on the folder name or
  in the right pane, while in the folder - PASTE

  Click on a file and hold down the CTRL key, and then you can click on as many files non-connected (or connected)
  you like - then right click in the highlighted area - COPY - go where you want-
  Right-click on the name of the folder or in the right pane, while in the folder - PASTE

  ---------------------------------

  If this isn't the case, what you need to say and then use the files, folders, and programs that you use.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Use them command 'properties' in Windows Explorer to open the file

  I get this error where, when I start Photoshop, I get a popup saying "can't load Photoshop because the file is locked or you do not have the necessary privileges...." "Use them command 'properties' in Windows Explorer to open the file. I have unlocked access to everyone for the 64-bit and 32-bit version still does not work. The only way to make it work is by going to Program Files > Adobe > Adobe Photoshop CS5 (64 bit) and manually start as administrator.

  Everything was working fine until today. Help, please!

  If it worked before, and you have made any hardware or software changes, you can reset the preferences.

  Start photoshop and hold IMMEDIATELY the Alt, Ctrl + Shift keys.  It is a little awkward, but keep trying until you get a window to reset.

• I can not move the files to a folder in windows XP, only to copy them, and I get the windows error. This happens on any file or folder.

  I use XP Pro SP 3 and I'm having a problem with moving the files from one folder to another, no matter where the folder or files. If I try to move a file, it crashes and it cannot be opened or used. If I move a folder, then crashes all the contents of the folder, and I can't even open the folder, it tells me access is denied, this nothing else. If I try to delete the file, then I get a prompt to error telling me that the file or folder is not accessible, and that access is denied and "make sure that the disk is not full or write protected." If I try to move the files corrupt in another folder, this time I get the message "Unable to move or replace" the file in question and "make sure that the disk is not full or write protected." If it is a document as a text file, then I can open the file and there is a prompt indicating that access is denied. I can then use the text document and save something, but if I close the document and then try to reopen it, all the changes are lost.
  It is not this problem if I move the files to an external device or disk drive.
  I am running as an administrator.
  Right now, if I need to move a file, I copy it to its destination, which is possible and then delete the original file. With the help of a release program was the only way I could delete these files, which could no longer be used.

  Hello Closrapexa, welcome.

  1. do you have this problem started recently?

  I recommend trying the system restore to bring the system back to a State before the problem started. Try this:

  1. click on START

  2. click on "all programs".

  3. click on "Accessories".

  4. click on "system tools."

  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need to print a list of the files in a folder

  I need to print a list of the files in a folder.

  How can I do this without resorting to either a print screenshot or typing everything on hand?

  Thank you.

  I need to print a list of the files in a folder.

  How can I do this without resorting to either a print screenshot or typing everything on hand?

  Thank you.

  Hello

  It is actually very easy to do. See the following article for steps add a menu item print directory for the context menu.

  How to add the feature print directory for files in Windows XP, Windows Vista or Windows 7

  Scroll down to the Windows 7 section and follow the instructions.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• How to print all the files in a folder without having to open each one?

  Hello

  Can someone tell me how to print all the files in a folder? I often need to print multiple files in a folder and it would allow me to save a lot of time!

  Thank you!

  I've done some testing, and it seems that Windows 7 allows print several files when they are all the same type of file.  So, for example, you can select and print 15 Word documents, but not a Word document and a single PDF document.

  To work around this limitation, you can print each file type separately.  For example, to print PDF files in a folder:

  1. Type *. PDF in the search for top-right box.
  2. For 1-15 files, press on CTRL + A to select all the.
  3. For 16 or more files, select 15 of them (click on the first, SHIFT + click the last).
  4. Click any file, and then click print .
  5. Repeat steps 3 and 4 as needed.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Move all the files to new folder

  Today, I was working on a hearing CS6 project with a designer of siund.  We have a problem getting a mounted disk and ended with copies of the files project and media on 2 discs.  some of the aif files have beed updatred and its tricky to work exactly what tiles, we used.  to open the project, I need both drives and when he playes the disk activity light flashes on both.

  What should I do to copy the project files and media in a unique folder structure, so I can give him his drive back but can't work out how to do this.  How can I do this?

  Ben

  funkytwig wrote:

  What should I do to copy the project files and media in a unique folder structure, so I can give him his drive back but can't work out how to do this.  How can I do this?

  If you open the correct versions of all the files in your session, you can use the file > export > Session and include the ability to save all of the associated files. You can name and set the location. When you open, he must only reference these files.

  That is, assuming that this option was included in CS6 and I think that it was - have to turn on another machine to check if. If this option is not there, then you must do so via the operating system.

• The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?

  The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?  Disk space is very low around 1 & half GB. Please someone help resolve this issue. I am looking for the solution, but it did not have a specific.

  Thank you best regards &.

  Atul Zade.

  CCleaner is very useful to get rid of temporary files, you can get it here: http://www.piriform.com/ccleaner you can use it to clean your temporary files, but DO NOT use registry cleaning works, registry cleaning is mainly a useless effort that can cause more harm than good.

  John

• How can I print a copy of the files in a folder - not each file - just the list

  original title: list of print files

  How can I print a copy of the files in a folder - not each file - just the list? List of cases of printing

  How can I print a copy of the files in a folder - not each file - just the list?

  Karen's directory printer (free)