Windows allowing not to load programs

Similar Questions

• Can not down load programs cannot open attachments in windows mail

  When I try and download a program it down then charges disappears disappeared. Also in Windows mail I try and open an attachment and it starts to open then went it does nothing. I posted this message once before, and somebody said to go back to internet explorer 7 and uninstall internet explorer 8 I did. It has not corrected the problems, so a few days later I went back to I.E.8. I have all the Vista undates installed including service pack 1 and 2.

  Someone said to just reinstall Vista with the disk I got from Dell with my computer, but that didn't work. To the low laoded all files, and then when he went to develop he got 27 percent and stopped while I had to close and the computer went baclk to my old settings.

  I'm not good at this stuff and I am quite at a loss to know where to go or what to do.

  I tried to look for problems in the way that someone told me to and he said that some files were corrupt, but when I tried to find out which he says I didn't have permission to view this list.

  After hours of searching I found the problem. I got 8.5 AGV antivirus installed and tried to upgrade to AVG 9.0, something went wrong and he fucked up eveything. Fortunately, AVG Web site had heard of this problem and it had a fix for this. Now everything is back to working perfectly. I hope this answer helps someone else. It was a blind luck that I found the problem that I am not at all computer.

  CATFISH51

• Restore VISTA after Windows 7 not genuine loading

  I inadvertently installed a non-genuine version of windows 7.  In order to correct the problem, I decided to run the rocovery system to retrieve my loaded original software.  Cam Windows Vista downloaded on my Compaq Presario desktop computer and the PC came not with the installation disc as the files were stored in the part of the recovery.  I followed the instructions and made backups on DVD 14.  When I finished the backups and finsished blow, the PC restarted and the message came that the Boot MGR was not found.  It seems now that I don't have an operating system.  Why the recovery program not located and restore my Vista OS?  I do not see why I would need to buy another OS, if I had alreay Vista downloaded on the PC.

  http://www.Compaq.com/CPQ-country/cpq_support.html

  Problem with the recovery process, contact the manufacturer of the computer.

  This isn't their recovery process, Microsoft.

  Also contact Compaq and ask them to send you a set of recovery Vista disc/s.

  Normally, they do this for a cost of $ small.

  See you soon. Mick Murphy - Microsoft partner

• notebook dv6 restored envy and windows 8 not be loading not I don't have disks

  I bought a laptop HP dv6 want used with Windows 8.  The person I bought was not to remove his password or fingerprint scan, I have been unable to reach (I bought out of State).  I did some research and found the best thing to do was restore complete system - which i followed the instructions and made.  I don't have the original driver disc.

  I am now in a loop of contant, where he arrives with the first password which successfully, I have changed but want to remove.  When it starts to load the administrator that is in a constant loop of Windows didn't load correctly. Restart the computer.  And I fo around and around, I tried everything I found here and many other bulls and still I am unable to make it work.

  I have a Windows 7 disc, but I'm afraid to even try because I was told that resetting to the factory settings would work and it doesn't I don't want to do more damage.

  I noticed that the date was born 00/00/0000 say I'm not sure if it of part of the problem or not

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  Please contact official HP support in your country / region, via the Portal Support HP's worldwide, to see if the HP recovery support is available for the computer. Software may not be covered by warranty, and there may be fees for the HP recovery media.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Windows will not display the programs that are installed in the area Add / Remove programs

  I tried to install firefox, then I change my web page. It reported a script error when loading. The program runs, but not right so I removed and tried again with the same result. It runs in the safe is no no not sure what it is.

  Now I can't run add it / remove programs in the Control Panel, it will be no fill. I can leave this mode and run what seems normal.

  Thanks John

  Hi Tubethumper,

  1. the Add/Remove Programs list is empty?

  2. you receive an error message when you access Add/Remove programs?

  3. do you still receive error loading Firefox?

  See the Microsoft article below and run them the fixit tool available, check if it works.

  Incorrectly, Add/Remove Programs tool displays installed programs

  http://support.Microsoft.com/kb/266668

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• contacts Windows does not appear in "all programs".

  Contacts Windows does not appear in 'Programs' in my new laptop using Windows 7, although I brought all my contacts in my old laptop using Windows Vista.  Everything I found online dealing with issues related to the importation of these contacts began with directions to open Windows Contacts under start programs. What should I do to get the Windows Contacts is displayed in all programs?

  I've never had Windows Contacts in all programs in Windows 7.

  I think that Vista had the Windows Contacts in all programs.

  Is located in the

  Username C:\Users\*Your * \Contacts

  If you type Contacts in the help, it will guide you as well.

  See also this.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/cannot-find-Windows-contacts-in-all-programs-menu/8af71887-81af-455C-92D3-22a9d156dfbe

• the startup screen icons not related to programs

  the screen icons startup or shirt cut in windows 8 not related to programs. before the problem I uninstalled the chrome program. I checked the apps and you can find shortcuts and files icon more cache for bing. Could reinstall the bing toolbar the problem. I can use internet and all programs on my desk otherwise, everything seems to work very well.

  Hello

  1. are you referring to the icons on the desktop?
  2 are the apps on the desktop screen operation?
  3. are you an error message when you try to open the icons?
  4. have you tried a running system restore?
  You can follow these methods and run a system restore to the date when it was working properly.
  Refer to the section "to restore your PC using System Restore.

  http://Windows.Microsoft.com/en-GB/Windows-8/restore-refresh-reset-PC

  Let us know the result.

• Premiere Pro sart to load and stop directly with a windows error message. The program is not responding properly.

  Hello world

  Premiere Pro sart to load and stop directly with a windows error message. The program is not responding properly. (or something like that... I work in German...)

  I just bought all Deinstalled CC all and installed again and again.

  The problem persists... just with premiere pro cc 2015.2... I'm working on windows 7.

  You have an idea?

  Thank you very much

  François

  You can please go through the requirements for Premiere pro - Premiere Pro system requirements for Mac OS and Windows

• An internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 of error in windows 7 Home premium 64-bit OS.

  I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?

  I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?

  You have posted in forum Windows XP hardware and drivers.  You should have posted in forum Windows 7, probably the forumprograms .

  If you post here, remember to include the name of the application that could not be loaded. Is Yahoo Messenger? Something else ("all applications for which I get this error")?

  Your question is also confusing: you get this error message every time that you do a reboot?

  You can use msconfigor Autoruns (look at the 'Connection' tab) to temporarily disable programs that start automatically when you log in to isolate the application that is causing the problem.

• Error: "Windows did not start because of an error in the software: load needed DLLS for kernel.

  Original title: I HAVE a BLACK SCREEN.  Shows an error message "Windows did not start because of an error in the soft ware: load needed DLLs for kernel."

  I can't boot from the hard drive or Operating System CD.  Any ideas on how to start the system to fix the error?

  Hi FilippoPosato,
   
  This problem may occur if the Hal.dll and Ntoskrnl.exe files are mismatched.
   
  To resolve this problem, start your computer from the Windows CD, and then upgrade Windows on-site.
   
  For more information, see:
  Error message: Windows did not start because of an error in...
   
  More information on:
  Error Messages When you start your computer if Program Files of Windows are missing or corrupted

• I can't load anything, told me the file type Wizard get safe software suggestions or you do not have a program installed that can open your file, either you are looking for a new matbe

  When I try to load anything my computer it says secure file type Wizard get software suggestions. You do not have a program installed that can open your file, or you may be looking for a new

  Hello

  · What file you load?

  · If it is saved on the computer? If so, what is the location of the file?

  · What is the service pack installed on the computer?

  · Do you remember all the recent changes on the computer before the show?

  · You have security software installed?

  1. check the file association is correct, you can see below the link to the same: how to change or choose the program that starts when you double-click a file in Windows XP: http://support.microsoft.com/kb/307859

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://onecare.live.com/site/en-us/default.htm

  With regard to:

  Samhrutha G S - Microsoft technical support.

• What does error loading program.exe.mean under Windows 98?

  I have an old system with Windows 98 on it.  I get an "error loading program.exe. -You must reinstall Windows' message every time I try to sign.  I don't have the original disc. How can I fix?

  Hello Michielle,

  To answer your question, program.exe loading error means that the program is not installed on your system.
  Andrew is correct, that the support for Windows 98 was arrested in 2006.

  Since Windows 98, we have 4 new operating system commercialized by Microsoft. Most of the new computers would not yet go Windows 98 as there are no available drivers for the new hardware.

  It would be better to upgrade.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I used to be able to right-click on a photo and bring up a window allowing me to resize, brighten, control eyes red etc, but he disappeared and I can not find. Can you help me?

  I used to be able to right-click on a photo and bring up a window allowing me to resize, brighten, control eyes red etc, but he disappeared and I can not find. Can anyone help please?               Don Fitzpatrick_795

  Thanks for trying to help me and I found already this site but was'nt be able to make it work for me, probably because I'm 82 years old and am certainly not a guru when it comes to computers, but if you have other thoughts on the subject, they will be welcome as long as they are simple, if you get what I mean.

  Sincerely, Don Fitzpatrick_795

  =============================================
  Since we have no way to know what you
  already tried or what the program that has been
  you were happy with... this question is difficult to
  fix.

  Question... When you view your photos now
  .. are you using Windows Live Photo Gallery?

  I'm guessing it was Windows Photo
  Gallery?

  Perhaps the two programs are still available...

  I wonder if you could go to... Start Orb / All
  Programs / Windows Photo Gallery... and
  the launch of the old version?

• Cannot open ALL programs on my laptop. Lower right corner indicates now that my vista windows is not geniune.

  I can turn on my toshiba satellite by using the windows vista program, but once everything is done loading nothing will open. The start menu will go up but can't do anything from there.

  Windows is not genuine

  Please read this article written by Keith, moderator of the forum

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-is-showing-as-not-genuine/cbd43297-0e4d-458C-8487-9168c4cd668d

• Share of software Flip does not completely load due to not write the script of window installation package

  Part of Flip software does not completely load on windows vista... error message windows package install will not write script to complete the installation

  Hello hedubang,

  Thanks for posting on the Microsoft answers Forum.

  I suggest to try the safe mode and see if you can install it in safe mode or if there is a conflict.

  Start the program in safe mode

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when you see the boot menu.

  2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.

  3 log on to Windows by using the administrator account or any account of a user with administrator privileges.

  Note: In Safe Mode, your display system and the Bureau will look and perform differently than in Normal Mode. This is only temporary. To return the system to Normal mode, we can simply restart the computer.

  To determine if the problem that occurs with the program is caused by another program that is running in the background, we recommend that you restart the computer in safe mode and then test the program. If the program runs correctly in safe mode, but does not properly run in normal mode, it probably is another program that is conflicting with the program in question.

  To determine which program is causing a conflict with the program in question, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.

  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base:

  929135 (http://support.microsoft.com/kb/929135/) how to solve a problem by performing a clean boot in Windows Vista and Windows 7

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think