Windows backup did not complete successfully.

Similar Questions

• Backup did not complete successfully with an error code 0 x 80070001

  The original thread title: backup error

  My first full backup did not complete successfully with an error code 0 x 80070001, what can be done to fix it?

  See link below and check your libraries. Are there any that you don't need? Do not create? This happened to me also and I got a library quick text that I didn't need, or created, and it's the same question. Note: The error number right could not be the same, so do not let alone to sway you.
   
  Backup Windows error (0 x 80070002) when adding custom libraries
  http://cogitation-rumination.blogspot.com/2009/12/Windows-backup-error-0x80070002-when.html
   
   

• "The backup did not complete successfully. Access is denied. (0x80070005)

  IV got a new pc a few months ago, im (del vostro 220) by getting only round to back up all my stuff now. I've run the wizard, insert a dvdr and follow the instructions. A few minutes later, I get the message...

  "The backup did not complete successfully. Access is denied. (0x80070005)

  You can also view this page.
  Quote:
  "This error occurs because the recovery partition is enabled for the file backup or restore of the system and is almost full. To work around this problem, do not select D:\ as a backup source. Also, go to the System Protection in Control Panel and make sure that D:\ is not activated for restore points. »

• Windows Backup has not completed successfully error Code: 0x807800B4

  I've just set up this computer with Windows 7 Pro SP1, I installed a bunch of apps, do a disc repair system and now I'm trying to save up to a central device part DLINK which is my data storage component only CE.  (Appointed: DLINK-4AB714).  Backup windows will not let me create a system image, because the device doesn't use NTFS file system and it says that it cannot protect the backup.  Frankly, I don't like the so-called protection. I want it to save the dam of the road anyway.  Now, I tried twice with the normal process of backup tries to back up the drive c: as well as of the information system.  This gets more and creating a shadow copy and then begins to back up the data files, but one) it takes forever to displays detailed information, making it necessary for me to leave and let the computer do its work without supervision and b) somewhere in the process, it fails.

  It is supposed to be about 77 gigabytes of data on the disc and or the backup attempt exceeded about 15 GB.  The system is running Norton Internet Security, something that came with the motherboard that I bought, and I don't know if that is the cause of the problems or not.  It isn't Norton 360, which also has a backup function.  What I don't see is a lot of network activity between the computer and the DLINK, even Sharing Center when I see the backup giving me details about the files to be backed up.  I wonder if, somehow, the network inactivity is involved.

  Somehow, I have to get a full backup so that I can reconfigure my hardware and software of restoration. This is my current goal, but without the aid of successfully complete I can't move forward.

  Hi Henry, glad to hear that you are trying to do the right thing, better is now than regret it later.

  The error messages are warnings only (mine said safeguards would be unsecured), you should still be able to select the network as a viable situation drive, I tested it and it worked fine for me.

  See the answer to this question: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/can-not-backup-windows-7-to-shared-mac-drive/4168a89c-a2fc-4350-bab2-7ec28ce155ff

  If this doesn't help not you plan backup on a USB and then manually copying the backup to your network storage.

  My last option for you is to watch a 3rd third party tool for backup instead.

  instructions here

• Windows backup does not complete successfully; ignored files

  Original title: backup Windows does not correctly complete

  My back procedure never seems to fill in correctly and there are always ignored files.

  I had a user account (missing) earlier (see my previous question linkhttp://social.answers.microsoft.com/Forums/en-US/w7security/thread/e625349c-3d2c-46fd-bdaf-0b38f4172da6/ ) which resulted in a lot of ignored files mainly from the user account disappeared (from Control Panel and the Welcome screen). I deleted the user account through management of the computer and also physically deleted the folder. Now, I don't have as many files ignored but I still get the journal something like that.

  ------------------------------------------------------------------------------

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\Administrator\Searches file. Error: (the system cannot find the specified file. (0 x 80070002))

  ------------------------------------------------------------------------------------------------------

  What I don't understand is if she is not able to trust the file why bother about backup? After all backup is supposed to be mirror image (literally) of things saved.

  (Please see the other partners / query link on this computer - unrelated)

  ( http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/f4b2581e-ca25-48d8-a6bc-db7a925c6c93/ )

  nandakumarms

  Hello

  I suggest you follow the steps mentioned in the article below and check if the problem is resolved.

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  http://support.Microsoft.com/kb/979281

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• backup did not complete; Cannot find the file specified 0 x 80070002

  I get this message lately.  Computer used to automatically back up every Sunday morning.  It's backup on a second internal hard drive 1 t.  A lot of space.  I get this message if I do an incremental backup or try a full backup.

  Hello

  It's your error code when you save;

  http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-PC-backup-problems-updated.aspx

  Scroll to halfway down there.

  There is another answer from here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/backup-did-not-complete-successfully-0x80070002/d4aa8e73-f12c-4e19-A9ED-2790af0d07d2

  See you soon.

• Software BlackBerry Backup did not complete

  Dear all,

  I have a blackberry z10 and I can't use the LINK to the support! I use USB, and when I backup forgetting I get the following error messages:

  Backup did not complete

  It could be a problem with the device or the connection during backup. Check that the device is turned on and connected.

  I'm under 64-bit Windows 8

  Help, please

  Yasser

  OK, I got an update from Blackberry OS 10 (10.0.10.82)

  The backup is now find work.

• Windows backup does not complete

  Same as above

  every other day I get a msg on my windows backup does not complete. What's wrong? I have inserted SEVERAL CD and it never seems to have solved! What should I do?

  Hello
  • What type of files are you trying to backup?
  • What version of the Windows operating system do you use?
  • You receive an error code?
   
  Do not include the libraries while safeguarding and then check what is happening.
   
  Here are some articles that you can consider moving by before starting the backup.
   
  Back up your files
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files
   
  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
   
  Back up your programs, files and system settings
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-programs-system-settings-and-files
   
  Should what backup settings I use to maximize my disk space?
  http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space
   
   
  Post back with the State for additional troubleshooting steps.

• Windows 7 backup is not completely successful 100%

  I wanted to reinstall windows and used backup for windows backup data. I left it overnight, the computer will not sleep or the battery fell. But in the morning, the progression is 100% and still it comes "backuo have not installed successfully. FET backuo file has been created in my portabke hard is by car he really supported or should I begin once more? Help, please...

  Hello

  We suggest to create a new backup of the operating system to ensure that you will have a complete recovery Image. Since you get an error message that "backup have not installed successfully", it is possible that the backup created on your drive is damaged.

  If you have any other questions, feel free to get back to us.

• 0x800704D3 error: the backup was not completely successful. The application has been abandoned, as he tried to take backup

  Original tile: appeared at the end of backup when the error message appeared. "The reverse was not entirely successful. The request was abandoned. (0x800704D3)

  Recently I had a problem with the combo of virus/malware.  Antivirus 2010, was then brought by an another 'guru' to download StopZilla.com who started the Delete files accompanying the computor.  I have kept and can't get rid of the problem, so decided to back up files, and then put in recovery disks.  Appeared at the end of backup files with the ninth disk, when the error message above has occurred. Is not something else.  Someone said elsewhere "make sure that the AC adapter is on"... what?  THA is the problem?

  Seen also it is suggested to get an external hardware, but what about hang the laptop to existing pc?  Would you do that?  What wiring do I need?

  Hi beltwaytraveler,

  1. you have any third-party backup program installed?

  2 have you tried to use a different backup disk?

  Method 1:

  You can temporarily uninstall third-party anti-virus on your computer protection software and then check if the problem occurs.

  Note: Be sure to install the security software on the computer after you fix the problem.

  Method 2:

  You can also try to uninstall any third-party backup program installed on the computer and try the backup.

  Method 3:

  You try to run the following command and check if all third-party services are running other Microsoft services.

  a. Click Start, click programs, accessories principally made, right click Guest and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:

  vssadmin list writers

  c. check the VSS writers listed.

  If you see any third-party service other than Microsoft services running, and then let us know about it.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The backup was not completely successful: code 0 x 81000006.

  Original title: Back is a failure.

  My laptop has never been great, but now is running out so regularly it is tedious. I have the chance to completely clean, install Win 7 and pop as my media files back on.

  However! I just tried to make a comeback to the top and get it

  The backup has failed

  blah blah blah

  code 0 x 81000006

  And yes I have turned everything off and back on again. :)

  Hello

  Step 1: Check if the backup and restore services are started and their situation is correct. To do this, follow these steps.

  (a) log-in as administrator.

  (b) click Start, type services.msc and press to enter.

  (c) in the list of items, double click: backup Windows and Volume shadow copy services.

  (d) define their startup type to automatic and start the service.

  (e) to apply the changes.

  Step 2: Run the disk check to find and fix errors on the disc.

  1. Click Start, type cmd, right-click on cmd, and then click Run as administrator.

  2. at the prompt, type chkdsk /f /r and press to enter.

  3. try to backup and check the result.

  For more information on 'Check a drive for errors' visit this link: http://windows.microsoft.com/en-US/windows-vista/Check-your-hard-disk-for-errors

  Note: For security, try to manually back up data before a disk check.

  For more information on 'backup of your files' visit this link: http://windows.microsoft.com/en-US/windows7/Back-up-your-files

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why windows backup did not restore all my files?

  He was set to back up all the files (documents, music, photos, etc.), but I restored my latest backup of the system and it seems to have restored some valuable files that I thought it was supposed to be back up.

  Somewhat confusingly, I have a folder containing many shortcuts to some of the files that are apparently not here, but can open the destination via the shortcut folder although it don't or unable to display the folder in Windows Explorer.

  Any help to work out what is going on would be greatly appreciated!
  Matt.

  Display the hidden files and folders. If no go, sfc scan. They should bail out you.

• Backup is not completed successfully: error 0 x 80070032

  I set up a scheduled backup of Windows 7 last week and was able to perform manual backups a few. Today, the continuous backup fault just after the end of the system image backup. The error is 0 x 80070032. I can't find any information on this error code, so I don't know where is the problem.

  I am running Win 7 Home Premium 64-bit. I backup in a new external hard drive Seagate with 1 TB of space, so space is not a problem.

  Hi Ray,

  Welcome to the Microsoft Answers site!

  You can check if the backup and restore services are started when you try to make a back up of files.

  1. click on start

  2. in the start search box, type Services

  3. click right on - RUN as ADMINISTRATOR

  These are the services that must be running when you try to make a return to the top.

  Automatic started Windows event log
  Task Scheduler started auto
  Backup Windows stopped manual

  Security/antivirus/antispyware products also have been known to cause this problem. Try disabling the security software and check if you are able to go back to the top.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• backup was not completely successful error (0 x 81000002)

  Hi, I didn't anywhere online no chance.
  Running Vista business and have backup running weekly at least 2 years now and this week I got this error.

  "An error has occurred. The following information can help you to resolve the error:
  The backup location is not available. Review your backup and restore settings and check your hardware configuration. (0 x 81000002)"

  Vista backup can't detect my secondary drive now, but I can always access to and use the files on this disc. It's a drive SATA with at least 100 GB of free space remains available.

  Thank you
  Edmond

  Hi ed202d.

  What happens if you go to disk management (right click computer, right-click Manage) and change the drive letter to a different letter?  To do this right click on the partition and select change driver letter and paths.

  Also check the security on the road - for this, right click on the drive, then go to properties, security.  For testing purposes, please add the user "Everyone" and give Everone all permissions on the drive.

  -Thank you

• Windows Pro L10 satellite did not start successfully

  I have a satellite pro L10 at home which was working fine yesterday.
  However, I'm going to turn in today and after the toshiba screen comes up I get a message on the screen saying "We apologize for the inconvinience, but windows did not start successfully" it gives then options such as safe mode, safe mode with network, last known configuration and start windows normally.

  No matter what is selected, I get the loading windows screen but then it goes black and nothing happens.
  Is there something I can do manually which will remedy this because stupidly

  I have recent work here that has not yet been saved!
  Thanks in advance

  Hello

  In my opinion, there is nothing to do because the operating system cannot start, even in SafeMode with network, last known configuration, etc.
  You need to reinstall the operating system

  If you want to backup the data on the HARD disk, you will need to access the HARD disk
  You can create a bootable CD WinPE which help you to gain access to the HARD drive

  Download WinPE image (use google) and create the bootable CD. You will need to burn the image to CD in order to get a bootable CD.
  Can boot from this CD, backup the data on the external HARD disk and then reinstall windows