Windows cannot start the service windows firewall

Similar Questions

• Cannot start the Services of EMP.

  Hi all

  Here when I try to start the Service EPMA I'm unable to start and an error of : hyperion epma Server service on local computer started and then stopped. When I check with EventViewer, I saw this error

  MISTAKE1:

  [EPMA Server Startup] SVR_ERR_PROCESSMGR_CANT_INIT_SESSIONMGR ERROR: failed to initialize the Session Manager.Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: failed to initialize the Session Manager. -> Hyperion.CommonServices.Exceptions.DataAccessLayerException: to run the server size, database ALLOW_SNAPSHOT_ISOLATION and READ_COMMITTED_SNAPSHOT time parameters should be on 'ON '.  Their values are currently 'OFF' and 'OFF', respectively.  For more information, see the product documentation.

  to Hyperion.DataAccessLayerCore.DataAccessLayer... ctor (parameters NameValueCollection, String tablePrefix, String baseNamespace, String schemaVersion, Boolean onlyLoadKnownTables)

  to Hyperion.DataAccessLayerCore.DataAccessLayer... ctor (NameValueCollection, String tablePrefix baseNamespace, schemaVersion String String parameters)

  to Hyperion.SessionManager.DAO.SessionManagerDataAccessLayer... ctor (NameValueCollection parameters)

  At Hyperion.DimensionServer.SessionManager.SessionStoreRdbms.Initialize (String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout, Boolean logAllSQL)

  At Hyperion.DimensionServer.SessionManager.SessionManager.Initialize (String configFileName, Boolean restorePastInstanceSessions, Boolean EnableCaching)

  -End of the exception stack trace internal-

  At Hyperion.DimensionServer.Service.Main.InitializeSessionManager)

  At Hyperion.DimensionServer.Service.Main.Start)

  ERROR2:

  Service cannot be started. Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: Failed to initialize the Session Manager. -> Hyperion.CommonServices.Exceptions.DataAccessLayerException: to run the server size, database ALLOW_SNAPSHOT_ISOLATION and READ_COMMITTED_SNAPSHOT time parameters should be on 'ON '.  Their values are currently 'OFF' and 'OFF', respectively.  For more information, see the product documentation.

  to Hyperion.DataAccessLayerCore.DataAccessLayer... ctor (parameters NameValueCollection, String tablePrefix, String baseNamespace, String schemaVersion, Boolean onlyLoadKnownTables)

  to Hyperion.DataAccessLayerCore.DataAccessLayer... ctor (NameValueCollection, String tablePrefix baseNamespace, schemaVersion String String parameters)

  to Hyperion.SessionManager.DAO.SessionManagerDataAccessLayer... ctor (NameValueCollection parameters)

  At Hyperion.DimensionServer.SessionManager.SessionStoreRdbms.Initialize (String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout, Boolean logAllSQL)

  in Hy...

  But I put both ALLOW_SNAPSHOT_ISOLATION and READ_COMMITTED_SNAPSHOT database settings ON

  It's the query I used

  Epmdb ALTER DATABASE SET READ_COMMITTED_SNAPSHOT ON;

  Epmdb ALTER DATABASE SET ALLOW_SNAPSHOT_ISOLATION ON;

  Even if I'm unable to start, same error was meditating.

  Can anyone suggest me what can do to solve this problem.

  Thanks in advance.

  Hello

  If this is the new installation, try this:

  Stop EPMA Services database EPMA existing to delete and create the new database with the SET options and configure EPMA with this database.

  ALTER DATABASE MyDatabase

  SET READ_COMMITTED_SNAPSHOT ON

  ALTER DATABASE MyDatabase

  ALLOW_SNAPSHOT_ISOLATION DEFINED ON

  Start the Services of EPMA.

  Thank you

  Mady

• Cannot start the services of ICF error 1079: the account specified for this service is different from the account specified for other services running in the same process

  Original title: I'm trying to start the Windows Firewall.

  I'm trying to start Windows Firewall services, (administrative control / tools/services/windowsfirewall Panel) and error 1079: the account specified for this service is different from the account specified for other services running in the same process, rises.  What should I do?

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Logged in as an administrator on the computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps described in the following link and check if the problem persists:

  http://support.Microsoft.com/kb/2478117

  Method 2:

  If the previous step fails, run the System File Checker tool to troubleshoot missing or corrupted, system files proceed to the following link:

  http://support.Microsoft.com/kb/929833

  Method 3:

  If the previous step fails, set the center of security and its dependencies services to run under the Local Service account. Follow these steps:

  a. Click Start, type services.msc and press to enter.

  b. double-click Security Center, click on tab log.

  c. Select "this account", click on the Browse button, type Local Service and click ok.

  Type the password and confirm the password and click ok.

• Cannot start the services after update to 6.6 CentOS

  Hello

  Today, I've updated my CentOS to release 6.6.

  When I now try to run the current version of the reader for my virtual Windows 7, I get after the modules updated the error message "cannot start services. See log file for more details /tmp/vmware-root/vmware-modconfig-3866.log".

  The log file is added.

  Who can help me?

  Greetings!

  kuespert

  Hello

  I have another problem after Player 6.0.4 update. See /dev/vmmon with Reader 6.0.4 and CentOS lack 6.6

  The current thread continues here.

  Greetings!

  kuespert

• Cannot start the service of Directors of EBS R12.2.4

  Hi all

  EBS R12.2.4

  RHEL 6.6

  I was able to start admin service before but now it does not

  The error log does not show any idea. Help, please.  Thank you

  Service control script execution:

  /U01/appcrp/CRP/FS1/inst/apps/CRP_ip-10-0-0-216/Admin/scripts/adadminsrvctl.sh start - nopromptmsg

  Timeout specified in the context file:-1 second (s)

  
  

  script gave:

  ****************************************************

  
  

  You are running version 120.10.12020000.9 adadminsrvctl.sh

  From WLS Server Admin...

  See /u01/appcrp/CRP/fs1/inst/apps/CRP_ip-10-0-0-216/logs/appl/admin/log/adadminsrvctl.txt for more details

  adadminsrvctl.sh: leave with the State 1

  adadminsrvctl.sh: check the logfile /u01/appcrp/CRP/fs1/inst/apps/CRP_ip-10-0-0-216/logs/appl/admin/log/adadminsrvctl.txt for more information...

  .end std out.

  .end err out.

  
  

  
  

  The log is:

  
  

  ================================================================================

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  03/23/15-18: 29:54: adadminsrvctl.sh version 120.10.12020000.9

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  03/23/15-18: 29:58: adadminsrvctl.sh: exit with status 2

  ================================================================================

  03/23/15-18: 33:22: adadminsrvctl.sh version 120.10.12020000.9

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  Validated the arguments passed to the ebs-nmstart-adminsrv option

  Check if the administration server is already in place.

  The server administrator is not already expired.

  Check if the Node Manager is already in place...

  Connection to the node Manager...

  Connected to the node Manager.

  The Node Manager is already in place.

  Start the AdminServer server...

  Error starting AdminServer server: weblogic.nodemanager.NMException: Exception when starting Server "AdminServer.

  03/23/15-18: 33:42: adadminsrvctl.sh: exit status 1

  ================================================================================

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  Please see the workaround mentioned in the note:

  Error starting AdminServer server: weblogic.nodemanager.NMException: Exception when starting Server "AdminServer" (Doc ID 1906029.1)

  I hope this helps!

  -Kj

• I got code 80070426 when I try to update my windows vista professional. I tried to start the sistem but I couldn t. An error pops up: "error 0xc004e002, Woindows cannot start the service. What can I do about it?

  Please your help!

  Hello

  It's the usual correction:

  Windows Vista 0 × 80070426 Activation Service not started or Validation not genuine error
  http://www.tipandtrick.NET/2008/Windows-Vista-0x80070426-activation-service-not-started-or-validation-not-genuine-error/

  ---------------------------------------

  You can try to run these to see if they help.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Description of the update for Windows Vista and Windows Server 2008 system preparation tool
  http://support.Microsoft.com/kb/947821

  --------------------------------------

  If necessary to start a free incident report:

  Click-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  and follow the instructions.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot start the services automatically after restarting the computer and also unable to define themes.

  Original title: My Services do not start automatically

  I've implemented all Services on 'Automatic', but when I restart the PC, they do not themselves. This is problematic because of the themes won't start not and my PC theme returning to 'classic '. Does anyone else have this problem, if so please help.

  More info, please ask.

  Thanks in advance

  In fact, the problem persisted due to the fact that:

  1 'Windows Cache of police service' was running, so I disabled it.

  2. "Windows Presentation Foundation Font Cache 3.0.0.0" also ran, so I disabled too.

  After disabling these two services, then by restarting the PC, he was back to normal and show to the it's the best.

  For those who need help, these are the instructions.

  Click Start, type "run" in the search box and click Run and enter "services.msc" and click ok. Once you've done that are looking for the two services above, located once double click on the first found, and in the drop-down list next to "Startup Type" choose "disabled", and then click on apply and then ok, do this for the second service also. Once that is finished, restart your PC, and I hope that your problems must be solved.

  Also, I think that it is better to download the "Free Window Registry Repair" of http://download.cnet.com/Free-Window-Registry-Repair/3000-2086_4-10606555.html.

  Install and click on "Full Scan" and after it has completed (this may take a while) click on "Error Correction".

  After all this, your computer must be at its best.

  I hope this helps someone.

  Thanks for all the help.

• Cannot start the DSC Shared Memory

  I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get the cannot start the Service Manager memory shared DSC. I uninstalled the DSC and reinstalled without change. I found in discussion forums that I need nidscsm.exe in the windows\system32 folder, but is not there. I am running Windows XP.

  I have 2 configurations like that. 1 PC always connects to the controller even if the error appears, another PC connects any, lights flash but error timeout then comms.

  Thank you!

  Sorry, maybe I had my names wrong. He was DAQ - Mx that I've upgraded to v.8.1 and that's where it messes up the communications of the OPC. I knew that if I install the DAQ - Mx without option checked OPC she always clears the NIDSCSM.COM as a service, but I can still use serial OPC communication. Strange...

• computer will not start the service, access denied

  I installed this windows service: http://code.msdn.microsoft.com/windowsdesktop/CppWindowsService-cacf4948

  and when I try to start the service in the GCS I get the error 5 error message: access denied
  my account is set to admin and I even tried to use the default admin user, but still it will not work

  Hello

  From the description above, you get the error code 5 access denied cannot start the service.

  Method 1: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Method 2: I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Post us the results once you try the steps above.

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• My windows firewall does not illuminate. Windows cannot start the Windows firewall Service ICS.

  How can I solve unless I need to have this problem to download protection software.

  Hi Octavia10,
   
  -What version of service pack of Windows XP you are using?
   
  Try the methods listed in the given article to resolve this problem:
  You cannot start the Windows Firewall service in Windows XP SP2
   
  Note: The steps are applicable to the other version of Windows XP as well.

• Windows cannot start the firewall service.

  Original title: my firewall stopped working and it won't let me turn it back on.

  My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?

  Hey, bed,.

  File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.

  Information available at:

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot start the windows Vista Firewall service

  My system is windows vista. When I tried to 'turn on the windows firewall' the message I got was ' Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the windows firewall service? "I clicked Yes and another message came:" Windows is unable to start the service windows firewall. " Then I went "firewall" on the Start button and click on "Windows Firewall with advanced security on local computer" and a message with the error code: 0x6D9 came. Can I get the solution to this problem of anyone in this forum. I will be grateful.

  Thank you

  Hello

  You are running a third part of the internet security solution? Many of them include a firewall that is clean and disable the Windows Firewall. If this is the case, you should first disable this one before the attempt to initialize the Windows Firewall. It is not advisable to attempt to run two firewalls at the same time.

  If you have recently deleted (uninstalled) a third party solution, you may need to run a cleanup this provider of software tool to remove any debris WASTE of this program in order to activate the Windows Firewall.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I cannot start the Windows Firewall, I get an error 0x6D9 code

  Original title: error 0x6D9 Code

  I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.

  Thank you.

  Original title: error 0x6D9 Code

  I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.

  Thank you.

  1 know if your AV (anti-virus) program is supposed to disable your Windows Firewall. Some do it.

  2. you do not do so in respect of the services? You do it in this way? ...............

  Start > Search box, type ser > press the Enter key > scroll down to Windows Firewall...

  under status, it lies and must say... Has begun

  under Type of status, it must be said... Automatic

  If it does not say that, right click on Windows Firewall > properties...

  in Startup Type, click on the pointer, and then select Auto

  to the service status, click Start

  Click OK when finished.

• Error: 0 x 80070424 "cannot start the Windows Security Center service" when you try to start the Windows Security Center Service.

  original title: Error Code 0 x 80070424 on the Windows Firewall settings

  I can't turn on my Security Center Windows Service, when I try to turn it on it displays "cannot start service Security Center Windows"

  Then when I go to my firewall settings, it says "Windows Firewall don't use recommended settings to help protect your computer" I click "Use recommended settings" but it displays "Windows Firewall cannot change some of your settings 0 x 80070424 error code" how to fix this?

  Hello

  Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

  This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

  Download the two files from the registry

  http://download.bleepingcomputer.com/win-services/7/Mpssvc.reg

  The base filtering engine

  http://download.bleepingcomputer.com/win-services/7/BFE.reg

  Run them and click YES when you receive a UAC prompt

  Restart your PC

  Press Windows key + R and type

  regedit , and then click ok

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  Right click on it -permissions

  Click ADD and type

  Everyone, and then click ok

  Now click on all

  Below, you have the permission for users

  Select full control, and then click ok

  Press Windows key + R and type

  services.msc , and then click ok

  Start the service database and then filtering engine service windows firewall

  If you still get this error

  Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

  Download and launch this key

  Shared access

  Click YES when you receive a UAC prompt

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

  Right-click on -permissions

  Click Add and type

  Select full control and everyone

  You should be able to start right now the firewall

  You can also Miss defender of windows security center, BITS and windows update services

  Download

  Security Center service

  http://download.bleepingcomputer.com/win-services/7/wscsvc.reg

  Windows Defender

  http://download.bleepingcomputer.com/win-services/7/WinDefend.reg

  BITS

  http://download.bleepingcomputer.com/win-services/7/bits.reg

  Windows Update

  http://download.bleepingcomputer.com/win-services/7/wuauserv.reg

  Run them and click YES when you receive a quick restart, UAC the PC
  

  
  

  Good luck

  * Edit *.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...