Cannot start the Services of EMP.

Similar Questions

• Windows cannot start the service windows firewall

  My windows Security Center indicates that "the windows firewall is disabled.  When I try to turn it on I get the message "windows is unable to start the service windows firewall."  Any suggestions?

  Hello

  The answer depends on what you have anti-virus security.

  If you have, for example, Norton Internet Security protects your computer, it is using Firewall from Norton.

  If you have 2 firewall of exploitation, which can cause system hangs, slow, etc.

  What Antivirus do you use for computer security?

  If you don't have a Suite of Internet security, protect your computer, scan for Malware:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Cannot start the services after update to 6.6 CentOS

  Hello

  Today, I've updated my CentOS to release 6.6.

  When I now try to run the current version of the reader for my virtual Windows 7, I get after the modules updated the error message "cannot start services. See log file for more details /tmp/vmware-root/vmware-modconfig-3866.log".

  The log file is added.

  Who can help me?

  Greetings!

  kuespert

  Hello

  I have another problem after Player 6.0.4 update. See /dev/vmmon with Reader 6.0.4 and CentOS lack 6.6

  The current thread continues here.

  Greetings!

  kuespert

• Cannot start the services of ICF error 1079: the account specified for this service is different from the account specified for other services running in the same process

  Original title: I'm trying to start the Windows Firewall.

  I'm trying to start Windows Firewall services, (administrative control / tools/services/windowsfirewall Panel) and error 1079: the account specified for this service is different from the account specified for other services running in the same process, rises.  What should I do?

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Logged in as an administrator on the computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps described in the following link and check if the problem persists:

  http://support.Microsoft.com/kb/2478117

  Method 2:

  If the previous step fails, run the System File Checker tool to troubleshoot missing or corrupted, system files proceed to the following link:

  http://support.Microsoft.com/kb/929833

  Method 3:

  If the previous step fails, set the center of security and its dependencies services to run under the Local Service account. Follow these steps:

  a. Click Start, type services.msc and press to enter.

  b. double-click Security Center, click on tab log.

  c. Select "this account", click on the Browse button, type Local Service and click ok.

  Type the password and confirm the password and click ok.

• Cannot start the service of Directors of EBS R12.2.4

  Hi all

  EBS R12.2.4

  RHEL 6.6

  I was able to start admin service before but now it does not

  The error log does not show any idea. Help, please.  Thank you

  Service control script execution:

  /U01/appcrp/CRP/FS1/inst/apps/CRP_ip-10-0-0-216/Admin/scripts/adadminsrvctl.sh start - nopromptmsg

  Timeout specified in the context file:-1 second (s)

  
  

  script gave:

  ****************************************************

  
  

  You are running version 120.10.12020000.9 adadminsrvctl.sh

  From WLS Server Admin...

  See /u01/appcrp/CRP/fs1/inst/apps/CRP_ip-10-0-0-216/logs/appl/admin/log/adadminsrvctl.txt for more details

  adadminsrvctl.sh: leave with the State 1

  adadminsrvctl.sh: check the logfile /u01/appcrp/CRP/fs1/inst/apps/CRP_ip-10-0-0-216/logs/appl/admin/log/adadminsrvctl.txt for more information...

  .end std out.

  .end err out.

  
  

  
  

  The log is:

  
  

  ================================================================================

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  03/23/15-18: 29:54: adadminsrvctl.sh version 120.10.12020000.9

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  03/23/15-18: 29:58: adadminsrvctl.sh: exit with status 2

  ================================================================================

  03/23/15-18: 33:22: adadminsrvctl.sh version 120.10.12020000.9

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  Validated the arguments passed to the ebs-nmstart-adminsrv option

  Check if the administration server is already in place.

  The server administrator is not already expired.

  Check if the Node Manager is already in place...

  Connection to the node Manager...

  Connected to the node Manager.

  The Node Manager is already in place.

  Start the AdminServer server...

  Error starting AdminServer server: weblogic.nodemanager.NMException: Exception when starting Server "AdminServer.

  03/23/15-18: 33:42: adadminsrvctl.sh: exit status 1

  ================================================================================

  Validated the arguments passed to the ebs-get-serverstatus option

  AdminServer is currently not running.

  Please see the workaround mentioned in the note:

  Error starting AdminServer server: weblogic.nodemanager.NMException: Exception when starting Server "AdminServer" (Doc ID 1906029.1)

  I hope this helps!

  -Kj

• I got code 80070426 when I try to update my windows vista professional. I tried to start the sistem but I couldn t. An error pops up: "error 0xc004e002, Woindows cannot start the service. What can I do about it?

  Please your help!

  Hello

  It's the usual correction:

  Windows Vista 0 × 80070426 Activation Service not started or Validation not genuine error
  http://www.tipandtrick.NET/2008/Windows-Vista-0x80070426-activation-service-not-started-or-validation-not-genuine-error/

  ---------------------------------------

  You can try to run these to see if they help.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Description of the update for Windows Vista and Windows Server 2008 system preparation tool
  http://support.Microsoft.com/kb/947821

  --------------------------------------

  If necessary to start a free incident report:

  Click-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  and follow the instructions.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot start the services automatically after restarting the computer and also unable to define themes.

  Original title: My Services do not start automatically

  I've implemented all Services on 'Automatic', but when I restart the PC, they do not themselves. This is problematic because of the themes won't start not and my PC theme returning to 'classic '. Does anyone else have this problem, if so please help.

  More info, please ask.

  Thanks in advance

  In fact, the problem persisted due to the fact that:

  1 'Windows Cache of police service' was running, so I disabled it.

  2. "Windows Presentation Foundation Font Cache 3.0.0.0" also ran, so I disabled too.

  After disabling these two services, then by restarting the PC, he was back to normal and show to the it's the best.

  For those who need help, these are the instructions.

  Click Start, type "run" in the search box and click Run and enter "services.msc" and click ok. Once you've done that are looking for the two services above, located once double click on the first found, and in the drop-down list next to "Startup Type" choose "disabled", and then click on apply and then ok, do this for the second service also. Once that is finished, restart your PC, and I hope that your problems must be solved.

  Also, I think that it is better to download the "Free Window Registry Repair" of http://download.cnet.com/Free-Window-Registry-Repair/3000-2086_4-10606555.html.

  Install and click on "Full Scan" and after it has completed (this may take a while) click on "Error Correction".

  After all this, your computer must be at its best.

  I hope this helps someone.

  Thanks for all the help.

• Cannot start the DSC Shared Memory

  I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get the cannot start the Service Manager memory shared DSC. I uninstalled the DSC and reinstalled without change. I found in discussion forums that I need nidscsm.exe in the windows\system32 folder, but is not there. I am running Windows XP.

  I have 2 configurations like that. 1 PC always connects to the controller even if the error appears, another PC connects any, lights flash but error timeout then comms.

  Thank you!

  Sorry, maybe I had my names wrong. He was DAQ - Mx that I've upgraded to v.8.1 and that's where it messes up the communications of the OPC. I knew that if I install the DAQ - Mx without option checked OPC she always clears the NIDSCSM.COM as a service, but I can still use serial OPC communication. Strange...

• computer will not start the service, access denied

  I installed this windows service: http://code.msdn.microsoft.com/windowsdesktop/CppWindowsService-cacf4948

  and when I try to start the service in the GCS I get the error 5 error message: access denied
  my account is set to admin and I even tried to use the default admin user, but still it will not work

  Hello

  From the description above, you get the error code 5 access denied cannot start the service.

  Method 1: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Method 2: I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Post us the results once you try the steps above.

• I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do

  I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?

  Hello

  Your question is beyond the scope of these forums.

  Please use the following links for that matter.

  Network Infrastructure servers Forum:
  http://social.technet.Microsoft.com/forums/EU/winserverNIS/threads

  Category of the Windows Server:
  http://social.technet.Microsoft.com/forums/EU/category/WindowsServer

  Concerning

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• My windows firewall does not illuminate. Windows cannot start the Windows firewall Service ICS.

  How can I solve unless I need to have this problem to download protection software.

  Hi Octavia10,
   
  -What version of service pack of Windows XP you are using?
   
  Try the methods listed in the given article to resolve this problem:
  You cannot start the Windows Firewall service in Windows XP SP2
   
  Note: The steps are applicable to the other version of Windows XP as well.

• Why Windows cannot start the Firefox Service on Local computer?

  Hello, Tech Savvy people-
   
  For some strange reason, the message in the title is what I get when I look under Services in administrative tools.
  I am told:
  Windows could not start the Service of Firefox in the Local computer
  Error3: the system does not have the selected path.

  I did a full scan of my files (sfc/scannow) and my drive (chkdsk); completed a full virus
  In addition, malware scan and all the so-called runs along fine.

  But Firefox 12 needs several clickings of surface, and when it finally arrived, several minutes.
  Boring.

  No idea why my local network or Local computer cannot start Firefox?
  Can anyone suggest how I could get my system to find this path?

  Firefox used to mount quickly enough, and my other browser, IE9 still does, even though I don't like
  using IE and for about 3 years found Firefox generally to be a superior browser.
  Feel a little miserable if I go back to IE.

  Thank you for answering this aggravation.
  marlem388

  Hello

  • Did you of recent changes to the computer?

  Uninstall and reinstall the program Firefox then check.

  If the problem persists, I suggest address you the Firefox support team for assistance:

  http://support.Mozilla.org/en-us/home

  You can also post your questions on the forum of Firefox: https://support.Mozilla.org/en-us/questions/new

  It will be useful.

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• Error message states that Windows cannot read the Service Notification of system events. Unable to start the computer.

  Original title: System Event Notification Service does not connect.

  Computer will not start.  Error message states that Windows cannot read the Service Notification of system events.

  Hi DACL.

  ·        What is the full error you receive when you try to start the machine?

  ·        You did it all change hardware or software on your machine before this problem?

  You can restore the system to the Windows recovery environment and check if you are able to boot to the desktop. Follow the steps in this link to boot into the Windows recovery environment and select the system restore option.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Repairs to the system of Windows recovery environment

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.