Windows could not start the ICS service on count local.

Error 1053: The service did not respond to start or control request in a timely

Please help me solve this problem

Hi Srinivasan,

Thanks for posting the request in Microsoft Community Forums.

This problem normally occurs when services do not respond to the operation and cause different conflicts. It can also occur because of all the third-party programs.

Method 1:

You can try all services that run Internet Connection Sharing (ICS) and check.

1. click on start, run, type services.msc and click OK.
2. to activate a service, look for it in the right pane, double-click its entry.
3. ensure that its Startup Type is set to automatic, and then click OK.

ICS depends on four other services namely:

1. base filtering engine (by default on startup: automatic)
2 network connections (by default to start: Manual)
3 remote Access Connection Manager (by default to start: Manual)
4. Windows Management Instrumentation (default of startup: automatic)

See if you can start all the services of four above first and define their types of startup as shown above.
Some virus/malware can wipe out Base filtering engine in an attempt to disrupt the functioning of Windows Firewall and other essential services. To find out if BFE is running on your system, click Start, and then type this command:

After checking and automatic startup for each of these services configuration, close the Services window and restart the computer before trying again to enable ICS.

Method 2:

Error can be caused by your security software blocking the Internet access/sharing. I suggest you to disable all security software and check if the problem persists.

Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

Method 3:

If the problem persists, you can perform the SFC scan to check if there is any corrupt system files.

Use the System File Checker tool to repair missing or corrupted system files

http://support.Microsoft.com/kb/929833/en-us


Hope this information helps. Response with the State, so that we can help you

Tags: Windows

Similar Questions

  • Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

    I had a crash dump blue screen, tried solutiions to the problem and told me to go to windows update and download all windows updates. downlownloading all updates failed and I got the error.

    Code 80246008

    Click on get help with this error and was instructed to go to services and start the background intelligent service services, it gave me the error message;

    Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

    Not very computer savvy! no idea what it all means or what I would do to this topic! Thanks a lot for any help

    Try this:

    To change or restart the Service (BITS) Background Intelligent Transfer

    1. Open administrative tools by clicking the start , clicking Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

    2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. Right click on the service of Intelligent Transfer (BITS) background and then click Properties.

    4. Under the tab general, next to startup type, make sure that automatic (delayed start) is selected.

    5. Next to Service status, check whether the service is started. If not, click Start.

  • try to start the bonjour service, but get the error message: windows could not start the Bonjour service on local computer

    error message
    Windows could not start the Bonjour service on local computer
    Error 5 access is denied

    I have Vista Home.

    This prevents me to update I have tunes.

    Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.

  • Windows could not start the search service on the local computer __error 183 cannot create a file when that file already exists__Windows 7 premium

    I have a newish system running windows 7 - I noticed that sought were slow and idenified as windows search service does not start - on attempt to start it, I get the above error.   Try looking Microsoft\search\data watch applications and temporary directories apparently appearing and disappearing.   Checked disable anti-virus effect but not obvious.     GlenW

    Hi Glen,

    Could you do a guest account to see if the problem is reproduced? I want to eliminate the possibility of a corrupted user profile. Thank you!

    Lisa
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • (ask) windows could not start the VSS service on the local computer 193 error: 0xc1

    What should I do to be able to wear again the system restore in my windows 8

    Thanks before

    Hello

    Sorry for the late reply.

    Please scan SFC.

    You can read the following Microsoft article to repair corrupted using SFC tool files. Use the System File Checker tool to repair missing or corrupted system files.

    http://support.Microsoft.com/kb/929833/en-us

    After executing check SFC scan if the issue is fixed, otherwise, please let us know the status of the issue.

  • Could not start the time service windows on the local computer 2 error

    Cannot update the system clock of time Internet.

    After double click to display the time in the taskbar, the Date and time properties window appears.

    Then I time tab-click Internet, and then click Update now - this produces the following message...
    "Year error occurred getting the status of the last synchronization." The RPC server is unavailable ".
    Then I clicked on start > Control Panel > Administrative Services > Services > time Windows
    I click Start the service and get the following message...
    "Could not start the time service windows on local computer."
    "error 2: the system cannot find the file specified."
    Help!  What now?

    Hello

    Glad to know that the problem has been resolved. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

  • Windows could not start the diagnostic policy service error 5 access is denied

    This started happening when I accidentally turned off my computer while it was the starter.

    I tried sfc/scannow, I did the CMD (net localgroup administrator) thing and tried manually from politics, nothing helps.

    Here is a screenshot of what, in my view, seems to be the problem. I am the only administrator of my computer,

    Hi John,.

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    You made any hardware or software changes on your computer before the show?

    Thank you to provide detailed information on the issue and your efforts to resolve.

    This problem can occur for the following reasons:

    -Windows Firewall is not defined by default.
    -Windows Firewall does not start.
    -Windows could not start the Windows Firewall.

    I suggest you try following the steps provided in this Microsoft article knowledge based and check if it helps.
    Reference:
    Some services do not start in Windows Vista and Windows 7
    http://Support2.Microsoft.com/kb/943996

    Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://Windows.Microsoft.com/en-us/Windows/back-up-registry

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Windows could not start the service Windows search on the computer Local (Error 1053)

    Windows Search does not work on the start menu, nor IE8 remembers the URL history more.

    I tried the procedure described in this post (does not work): http://social.answers.microsoft.com/Forums/en-US/w7files/thread/8d68d244-afca-4006-a6eb-57d4dd9d58df

    I ran a scan sfc, who has not returned this any integrity issues have been detected.  I also tried to disable the Windows search feature to "Turn Windows features on or off", rebooted and tried reactivation, without success.

    I tried to create a new profile, but the same problem occurred.  I discovered that WSearch service does not work.  When I try to enable it, I get the following error:

    ---------------------------
    Services
    ---------------------------
    Windows could not start the Windows Search service on Local computer.

    Error 1053: The service did not demand launch or control in a timely

    I did some searching on the forum, but I was unable to find a solution to this problem.  Any help would be greatly appreciated.

    Yep, http://www41.zippyshare.com/v/30503880/file.html

    Unzip it, and then apply this Difficulty REG. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

  • Windows could not start the Microsoft Office Service on the local computer

    The whole error is

    "Windows could not start the Microsoft Office Service on the local computer error 1053; Service has failed to demand launch or timely control.
    It seems that this instance of office 2013 has stopped working.
    Win7 64 bit machine with all sorts service packs, etc. was in a field, we moved to a new domain, and it worked well for one day, now it has this problem. Any advice or suggestions would be helpful.

    Hello

    Since you are faced with the question after changing to the new domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

    Forums TechNet Windows 7

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • Windows could not start the Base Filtering Engine service's local computer

    I get this error

    Windows could not start the Base Filtering Engine service's local computer
    Error5: Access denied

    When I try to start it but it won't start

    My computer is

    Windows 7 Home Premium

    64 bit

    Hello

    1. don't you make software changes before the show?
    2. do you have anti-virus outside Microsoft Product software?
     
    Follow method 3 in this article:
     

     

  • Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

    Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

    Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

    original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

    Hello

    Remember to make changes to the computer before the show?

    You can follow the below methods:

    Method 1: Restart Windows and try to start the Security Center service.

    If you still receive the same error, make sure that the WMI service is launched and running:

    (a) click Start, run , and then type Services.msc

    (b) double-click Windows Management Instrumentation

    (c) set its startup type to Automatic

    (d) click Start to start the service, and then click OK

    (e) restart Windows.

    Method 2: Restart the service

    Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

    To restart the IKE and AuthIP IPsec Keying Modules service:

    To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

    (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

    ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

    ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

    (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

    (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

    Note:

    You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

    You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

    Method 3: Run a scan of the System File Checker.

    http://support.Microsoft.com/kb/929833

    It will be useful.

  • Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!

    Please help me! ....
    Audio service does not
    I tried Services.msc and tried starting windows Audio...
    The following error has come!
    Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!
    There is a sign of X in the audio icon...
    and when I click on this audio icon... TROUBLESHOOTER OPENS...
    all this happened all of a sudden!
    Please help me!
    Thank you.
    Nischal Sp

    Please provide the error screenshot more better assitance. Also, try this:

    Try to copy and merge the audio from another Windows 8 or better service.

    You can do this by going to the Registry Editor (make sure that the other computer is also a 32-bit system)

    Go to HKLM/system/current control set/services/audiosrv click audiosrv and then on the file menu, select export and save the file to a USB key or drive.

    While copy on your machine and merge. Then restart your system.

    Otherwise reset Windows 8:

    http://www.kapilarya.com/how-to-reset-Windows-8

    Good luck once again :)

  • Windows could not start the windows on the Local computer firewall

    Original title: I don't have the first response says.then the following error code came.
    Windows could not start the ICF on local Computer.For more information, review the system event Log.If this is a service not microsoft, the supplier of service relationship and refer to the specific service 5 error code

    Hello

    Thanks for posting the request in the Microsoft community forums.
    The problem description, I understand that you receive the error "Windows has no start the firewall windows on the Local computer. To resolve this problem, please answer the questions.

    1. what anti-virus software is installed on the computer?
    2. do you have a third party security/firewall on the computer?

    If Yes, then you may not be able to start Windows Firewall, since you have a 3rd group of firewall installed.

    Even if you can re-enable the Windows Firewall, you can not run two firewalls at the same time.

    Try the troubleshooting suggestions provided to start the Windows Firewall.

    Method 1:

    Run the fix it from the link to the problems of the Windows Firewall Service and check.

    Diagnose and automatically fix problems of Windows Firewall service

    http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

    Method 2:
    You can check the service for the Service of Windows Firewall if it is started or not.

    a. Click Start.

    b. in the start search box, type Services.

    c. click right on - run as admin.

    Check if the below mentioned services has mentioned State and type start.

    Firewall Windows started Automatic\Manual.

    base filtering engine Automatic\Manual has begun.

    driver authorization Windows Firewall started Automatic\Manual.

    Also check the dependency services that are required for the execution of the Service Windows Firewall.

    Method 3:
    You can scan System File Checker to fix corrupted files.
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    Method 4:
    If the problem persists then, try the steps from the link.
    Some services do not start in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/943996

    Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ )

    How to back up and restore the registry in Windows

    Hope the information is useful. If you need help with the Windows Firewall, feel free to post you question in the forum. We will be happy to help you.

  • NAC AD SSO error: could not start the SSO service. Please check the configuration.

    Hi, can someone please help me with a problem of SSO?

    I'm trying to start the SINGLE sign-on service, but when I try to update I get the error message: "error: could not start the SSO service.» Please check the configuration. »

    The announcement is a Windows 2008 Server Standard R2 (64-bit) running at a 2003 domain functional level. (several servers) with the deployment of the OOB

    I was unable to ping the advertising server CASE CLI, so I created a static route to the announcement on the server of the ANC, and after that I successfully of the NAC Server ping IP address of the AD. The nac_server.log when I try to start the SSO:

    [[email protected]/ * / _primary_ag ~] # ping 10.200.0.3

    PING 10.200.0.3 (10.200.0.3) 56 (84) bytes of data.

    64 bytes from 10.200.0.3: icmp_seq = 1 ttl = 128 time = 0,247 ms

    64 bytes from 10.200.0.3: icmp_seq = 2 ttl = 128 time = 0,232 ms

    -ping - 10.200.0.3 statistics

    2 packets transmitted, 2 received, 0% packet loss, time 999ms

    RTT min/avg/max/leg = 0.232/0.239/0.247/0.017 ms

    [[email protected]/ * / _primary_ag ~] # tail-f /perfigo/access/tomcat/logs/nac_server.log

    2012-07-27 17:20:39.079-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:20:39.079-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:20:39.080-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:20:39.080-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:20:39.080 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:20:39.080 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:20:39.081 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:20:39.081 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:20:39.081-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:20:39.081-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:20:41.776-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:20:41.776-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:20:41.777 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:20:41.777 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:20:41.777-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 1

    2012-07-27 17:20:41.777-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 1:DURATION = 0

    2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = casuser

    2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = casuser:DURATION = 0

    2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = nissin.com.br

    2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = nissin.com.br:DURATION = 0

    2012-07-27 17:20:41.779-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = NISSIN.COM.BR

    2012-07-27 17:20:41.779-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = NISSIN.COM.BR:DURATION = 0

    2012-07-27 17:20:41.779 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save

    2012-07-27 17:20:41.779 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save:DURATION = 0

    2012-07-27 17:20:41.780 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer

    2012-07-27 17:20:41.780 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer:DURATION = 0

    2012-07-27 17:20:58.605-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

    2012-07-27 17:20:58.608-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

    [2012-07-27 17:20:58.608-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

    [2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: removed socket: 173d72d [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=11093,localport=1099]]

    2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 0 DEBUG

    2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE DEBUG =]

    2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 0 DEBUG

    2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE DEBUG =]

    2012-07-27 17:21:18.610-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

    2012-07-27 17:21:18.613-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

    [2012-07-27 17:21:18.613-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

    2012-07-27 17:21:38.615-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

    2012-07-27 17:21:38.618-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

    [2012-07-27 17:21:38.618-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

    2012-07-27 17:21:41.794-0300 DEBUG Thread-246 com.perfigo.wlan.common.HttpClientResource - go to url https://10.200.48.100:443 / wlan/gss/GSSNotificationServlet ...

    [2012-07-27 17:21:41.813-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: added the socket: 1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]

    2012-07-27 17:21:41.814-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1

    [2012-07-27 17:21:41.814-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]

    2012-07-27 17:21:41.814-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOStatus

    2012-07-27 17:21:41.814-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOStatus:DURATION = 0

    2012-07-27 17:21:44.103-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:44.103-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:21:44.106 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 1

    2012-07-27 17:21:44.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:21:44.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:49.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:21:49.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:21:49.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:21:49.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:21:54.107-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:54.107-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:21:54.109 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:21:54.109 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:21:54.110 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:21:54.110 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:21:54.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:21:54.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:21:58.619-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

    2012-07-27 17:21:58.622-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

    [2012-07-27 17:21:58.622-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

    2012-07-27 17:21:59.109-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:59.109-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:21:59.111 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:21:59.111 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:21:59.112 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:21:59.112 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:21:59.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:21:59.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:22:04.111-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:04.111-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:04.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 1

    2012-07-27 17:22:04.113 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:04.113 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:22:04.114 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:04.114 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:04.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:04.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:09.115-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:09.115-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 1

    2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:09.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:09.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:14.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:14.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:22:14.117 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 1

    2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:14.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:14.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:22:17.017-0300 DEBUG RMI RenewClean-[10.200.2.103:1099] com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 2

    [[2012-07-27 17:22:17.017 - 0300 DEBUG RMI RenewClean-[10.200.2.103:1099] com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]]]

    [2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: socket: 59725 c added [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]

    2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 3

    [[[2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]], 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]]

    2012-07-27 17:22:18.624-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

    2012-07-27 17:22:18.627-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

    [2012-07-27 17:22:18.627-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

    2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:19.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:19.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:19.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:19.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:24.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:24.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:22:24.121 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:24.121 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:22:24.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:24.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:24.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:24.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    2012-07-27 17:22:29.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:29.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:22:29.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:29.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:22:29.123 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:29.123 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:29.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:29.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    [2012-07-27 17:22:32.022-0300 RMI Scheduler (0) DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: removed socket: 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]]

    2012-07-27 17:22:32.022-0300 com.perfigo.wlan.ssl.SSLLog RMI Scheduler (0) DEBUG - RMISocketFactory:CACHED_SOCKETS_SIZE = 2

    [[2012-07-27 17:22:32.022-0300 RMI Scheduler (0) com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]]

    [2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: moved socket: 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]

    2012-07-27 17:22:32.022-0300 TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1 connection

    [2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]

    2012-07-27 17:22:32.022-0300 TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1 connection

    [2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]

    2012-07-27 17:22:34.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 1

    2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

    2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

    2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

    2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

    2012-07-27 17:22:34.124 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

    2012-07-27 17:22:34.124 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

    2012-07-27 17:22:34.125 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

    2012-07-27 17:22:34.125 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

    2012-07-27 17:22:34.125-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

    2012-07-27 17:22:34.125-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

    [[email protected]/ * / _primary_ag ~] #.

    Thank you

    Moises,

    I wanted to know if you have followed these steps:

    http://www.Cisco.com/en/us/docs/security/NAC/appliance/configuration_guide/49/CAs/s_adsso.html#wp1266896

    Thank you

    Tarik Admani
    * Please note the useful messages *.

  • I have error #1053 windows could not start the printer spooler. Help

    Windows could not start the printer spooler. I received the error #1053.
    whatever it is sent to the printer never finished loading and crashes to the top
    my computer, so I have to re - start.

    This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Ask your questions to http://answers.microsoft.com/en-us/windows/forum/hardware, making sure that you specify your Windows version in the drop-down lists at the top.

Maybe you are looking for