Windows does not start after recovery

Similar Questions

• Windows does not start after the update...

  Hope someone can help with this,

  I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black screen with Windows Error Recovery on top, then he said "Windows does not start. A recent hardware or software change might be the cause. I tried to restart it in different ways, but nothing. Then he said: I have to insert my OS drive to try to fix, but that's not even start. Everyone knows about this problem? This has happened right after that I installed the update...

  L.Butler,
  Are you able to boot from your Vista DVD or recovery partion and run the Startup Repair tool?  If you do not have a Vista disc so make sure that your computer is configured to boot from the CD drive before booting from the hard drive.  Once you start with support for Vista select the "Repair your computer" option and first run "Startup Repair".  If that is not correct the problem then boot with Vista support and select the option "System Restore" and choose a date prior to the update install.
  Once you are able to boot normally again, then I suggest that you are looking for virus\malware.  SP1 was released in April 2008.  So if you install earlier means there may be other problems on your system.  If you have a backup of your current personal data then I recommend to do a clean restore to install\factory.  Then immediately install antivirus software, and then do all Windows updates before installing other software. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IdeaPad Y530: windows does not start after that laptop went to sleep mode.

  Hello

  More great frustration in my life have laptop brand new, this for me.

  After that the laptop goes into mode 'sleep', I'm not able to go back to Windows. All light are there and watch as usual, but there is no Lenovo Welcome logo or any other sign of normal behavior. I can turn it off by holding the button market / stop, but when I turn back the problem is still there. Windows does not start.

  I was able to go back to Windows that day after leaving just laptop without any power and battery.

  I called Lenovo and they suggested to disable the standby modes use put into hibernation. I did it. When the screen saver started, something went wrong, computer got froze and I had to restart, but then again, black screen and no reaction.

  Anyone have any ideas?

  Thanks for the reply.

  That's what I end up doing. OnKeyrecover does not work either so what spoke on the phone with Lenovo. Then he is gone now for repair.

• Portege R830 - Windows does not start after I have install Comodo Firewall

  Good afternoon

  I bought today a Portege R830, and after the Windows configuration, the first program that I installed was the popular free Comodo Firewall. After that I restarted, Windows 7 unbootable. It would be stuck on the user login screen and I know it's a problem with the firewall because if I do a system restore to the restore point created by Setup of firewall, windows restarts.

  So I ask if there is any inconsistency between the firewall and software on the Toshiba. A that someone already had this problem? I tried to solve this problem throughout the day with no results. I even re-installed Windows 7 using the Toshiba Recovery and the problem persists. I really like the Comodo and I want this firewall on my laptop, but Windows does not just start!

  Any help would be apreciated.

  Hi jillefsky,.

  Have you disabled the Windows Firewall before you start with the installation of Comodo Firewall? As far as I know, Portege R830 is delivered with preinstalled McAfee security software and you must remove this program before you install other security tools.

  Generally this has nothing to do with Toshiba and it s advisable to contact Comodo directly. They may know about this so they can give you a proper answer.

  But I put t understand why this program is so important to you. Windows already has an internal firewall so that these programs are not necessary in my opinion. Just install a good antivirus like AntiVir and enable the automatic updates of Windows. All that s!

• Windows does not start after Windows update.

  Original title: udate Windows vista problems

  I have dell dimension e520, Windows Vista home Basic, 32-bit SP 2, and in January, I upgraded RAM to 4 GB to 1 GB. McAfee security on the computer. The system worked until the last updated (March 2012).  The computer does not start correctly after March 2012 update and System Restore restores to February 21 implemented to date.  The computer will then automatically install the updates again and restart, after which the computer will not start up again (an annoying loop).  I also lose saved data after the system recovery sets return date.  I tried Microsoft Fixit, which did not help.  Thanks for your help. Hurry LOL available updates.

  PS computer says 'patch blocking windows to start.  Some updates successfully installed previously, but on the next time you download windows updates, that try to download updates and others have "failed."  Sorry for the confusion but I'm rushing and I try to include all the symptoms, I don't see dealing with the problem I have.

  I had to take it to get fixed, thanks to the effort.  The person fixing said he ran a few cleaning tools and which appeared to fix.

• Windows does not start after Windows updates downloading

  I have an IBM Thinkpad R32 with Windows XP, 512 MB of ram and a Pentium 4 processor. Wednesday night, when I stopped, Microsoft downloaded a bunch of updates - 13 to be exact. When I went to start my computer the next day, I got a black screen saying "We apologize for the inconvenience, but Windows did not start successfully.

  When I select 'safe mode' I get a series of files. When I select "Last known configuration" or "Start windows normally" I get a blue screen with "a thread tried to release a source he did not' and the error code that goes in the bottom" STOP: 0x000000E3 "(0X80558BE0, 0X82FCA548, 0 x 00000000, 0 x 00000002). "When I press F8 for advanced startup options, I get the same result to choose 'safe mode' as before, but also the blue screen to 'last known...". "or"start windows normally ".

  I have a recovery disk but it seems to be the 2nd of the 2 discs, and I can't find the first. More I am concerned about the loss of material on my computer (have not saved in a while). My technical skills are marginal - I'm good at copy what is on the screen but that's all.

  Needless to say, I'm a little upset with Microsoft for burning my muddy computer with its updates. I set it so that I have to approve the updates, but I wasn't paying attention when I hit the button turn off with the updates.

  shadiahm,
  Thanks for posting on the Microsoft Answers forum.  The first thing to do is to remove the external devices (printer, USB drives, USB hubs, etc.), then restart.

  If you have your XP cd, you can run a repair installation: http://support.microsoft.com/kb/315341.  If you do not have a XP CD you must contact your PC manufacturer to obtain replacement disks.

  Also, if you have access to your XP, you can start in repair mode and run SFC/scannow: http://support.microsoft.com/kb/310747 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows does not start after XP SP2 update

  automatic update using service pack 2 installed. restart windows when you are prompted. Windows will not start now.

  Hello

  ·        What happens when you try to boot to the desktop, you get an error message? If Yes, what is the exact error that you are experiencing?

  ·        You are able to boot into safe mode without any problem?

  Method 1:

  If you are able to boot into safe mode then, I suggest to do a system restore from there on the desktop normally boot and check.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode and do a system restore from safe mode.

  To do a restore system from safe mode, I suggest you follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 2:

  If you are not able to boot in safe mode then, I suggest you follow the steps mentioned in the article below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows does not start after the use of CD "" Toshiba Recovery and Applications/drivers ".

  Well my Toshiba Satellite A205-S5814 laptop was very slow and I was getting very frustrated with it, so I decided pop in the CD "Toshiba Applications/Drvers" perhaps to restore my laptop to factory settings and run perfect once again.

  As I was doing this operation and tried fixing it, the thing finished and off the laptop. And when I turned it back on, Windows will now start and give me the Windows Boot Manager screen. My laptop had Vista on it and I even tried to install Windows XP Home Edition on it with a disk I had. But whenever he's going to do, he says he can find t any hard drive? But for sure, there is a hard drive!

  I do not understand what has happened and why this Toshiba drive ruined my laptop. Before I used this drive my laptop has always works and works OK, it has been slow but still booted Vista and stuff ran. Can someone please help me or tell me what to do, I think that Toshiba has messed up my laptop with disc here, and I don't think that we should have to pay so he can get fixed.
  Please help me.

  Hello!

  I don t think that the Toshiba Recovery disk ruined your laptop.

  If I am right on the recovery disk is Vista and it was installed before. I think the installation going something wrong.
  When you get the Windows Boot Manager you can fix your computer? You can reinstall Vista without the recovery disk when you choose this option, then Toshiba product recovery.

  When you install Windows XP, you need a SATA driver. If you don t use one, you will get this error which can t find hard drives.
  You can download it on the Toshiba site and after booting from the XP CD, you must press F6 to load drivers from a floppy external drive or use you nLite to create a disc with drivers.

  Good bye

• Pavilion DV6-2140ED: Pavilion DV6: 10 Windows does not start after the upgrade memory (4 GB-> 8 GB)

  After I upgraded the RAM in my HP DV6 from 4 GB to 8 GB (2 x 4 GB Kingston KTA-MB1333 / 4G), Windows no longer starts. I get a blue screen and it keeps restarting.

  I think that the memory specifications are similar to the Samsung M471B5673EH1-CH9 original memory: Ghz 1333, non - ecc, 1.5 volts, case latency 9 etc.etc.

  It's a laptop DV6-2140ED HP with a processor Intel i5 - 430 m and Intel mobile chipset HM55.

  The bios detects 8 GB and it also passes the check/test of memory. As far as I know that I have also installed the latest bios firmware: F.1D. Reinstall my Windows 10 64 bit does not work either: with 8 GB I also get blue screens, after I try to boot my Windows 10 bootable USB drive.

  I read other people having the same problem, but I have not read a solution yet. What can we do about it?

  Hello:

  Please see this discussion.  You buy a very specific memory for any HP laptop with Mobile Intel 5 series chipset.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551/highlight/true#M207994

• Windows does not start after the installation of NVIDIA GeForce FX 5500. Help!

  Before, I had a Sparkle GeForce2 MX400 64 MB AGP Graphics Card with the installed driver. I have not had any problems with him, but I need to upgrade, so I got a NVIDIA Inno3D GeForce FX5500 256 MB 128 bit AGP graphics card. So, the thing is, before I installed the driver for it, the computer was working fine, but of course I can't play games. So I downloaded the driver from NVIDIA (175,19 I think), and I installed it in safe mode to avoid any conflict with my antivirus. The installation is complete, and the system restarted. Everything was going well until after the windows logo (by the way, I'm on Windows XP Pro SP3), when the system crashed all of a sudden. The screen turns off, the unit of the system itself was still on, but it does not. I tried enabling / disabling the NumLock, CapsLock button to check if there is an answer, but I have nothing. I manually turned the computer off, waited for about 3 minutes, the market again, but again, the system crashes after the screen Logo of Windows XP. I started in SafeMode again, uninstalled the NVIDIA driver, restart the system and everything went back to normal. I retried my old 64 MB AGP card and it still works fine. I really need to install the driver to make the most of my 256 MB graphics card. Can anyone help please?
  So far I did the following:
  1. re-installed Windows XP
  2 re-installed the driver NVIDIA about 5 times already.
  3. update all the drivers of my motherboard.
  4. completely removed all traces of NVIDIA using Drive Cleaner and put it back.
  5 installed DirectX 9.0.
  Still, none of them worked. Help!

  Here are my computer specs:
  OS: Windows XP Pro SP3
  Motherboard: ECS 661FX-M rev 1. 0 b
  Processor: Pentium 4 2.4 GHz
  RAM: 768 MB
  HARD drive: 1x80GB IDE slave, 1x20GB IDE Master
  BIOS: Phoenix Tech, LTD 6.00 PG 01/18/2006 v2.2
  Antivirus: Avast free Antivirus v6

  Any help would be appreciated. Thank you! :)

  PS: I know that my computer is really old. But please don't advise me to upgrade the entire computer or something like that. I can't afford to buy right now a new. Thank you.

  Hello

  I suggest to start the computer in safe mode and check if you can start.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  If you are able to start the computer in safe mode, then go to Device Manager and uninstall the drivers for the graphics card and restart the computer.

  If it boots fine in normal mode and then try to install the latest drivers in normal mode and check if that helps.

  Check if that helps.

• Windows does not start after the start menu after installing own home premium 7 on the Dell Inspiron Duo

  I did a clean install of windows 7 Home premium 64 on my dell inspiron duo 1090, returning 8.  This laptop does not have a disk drive or an Ethernet port.  I used Installer 64 bit of this Web site and the corresponding link.  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/can-i-revert-back-to-Windows-7-from-Windows-8/f8f5aaaa-8a18-4255-a6b2-5ecd6840d7ab

  It installed perfectly fine at first.  I was unaware of the proper order of pilot facilities and went first on the network drivers.  Designed for cordless operation and then use the updates automatic/driver finder.   After going on the dell site and download the drivers of network to a flashdrive from another computer, I then unpacked and used the setup.exe.  Now, when you try to restart the computer it perpetually loop screen Dell, the only options in F2 for Setup or F12 for boot options (the only option being the hard drive boot because there is no disk drive physical and nothing mounted on a virtual disk drive).

  Any help is appreciated and ask all the details that I left out.

  Thank you-

  I intend to use this laptop for school and Windows 7 is required for course work.

  Perform the following steps:

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the DVD of Windows 7 disc or a USB flash drive that you created, and launch the installation.

  After you have entered the user name and password that you will be asked:
  "Type your Windows product key", do not enter a key.
  Also located just below the box where you enter the key is a box with a check mark
  to "Automatically activate Windows when I'm online", remove the check box and click "next".

  You now have a 30-day grace period to activate Windows.

  During the grace period, you can install your device drivers,
  run Windows updates and solve other problems or issues.
  Once you are satisfied everything is working properly, and then activate Windows.

  ====================== Device Drivers ===============================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then download to a folder on your hard drive and install all, beginning with the card mother/chipset drivers, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = Run Windows Update =.

  Install the 'Important' updates that are available.

  Make a small group (10 updates to max at a time) of the updates at a time,
  reboot if prompted and install another small group of updates and so on.
  registration of .NET Framework updates for the end.

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  J W Stuart: http://www.pagestart.com

• Satellite A100 - BIOS and Windows does not start after the BIOS update

  Hello, I extend my Satellite A100 laptop BIOS.

  After update, I can't start my laptop and the BIOS will not start.

  You see the Toshiba logo?

  Was there a power failure when you updated the BIOS?

  Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

  If this does not help, you will need to send it to a Service Center for repair.

• Windows does not start after update

  Stop PC last night and let it install 3 critical updates at shutdown. On the PC this morning, it won't start. Repair of the system indicates it cannot automatically repair...

  Restores the auto system restore point before the decommissioning, and it now boots normally...

  Then, Mr. Gates, who, following updates kills my PC? :::

  Update security for Windows 7 (KB2419640)

  Download size: 857 kb

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=204803

  Help and Support:
  http://support.Microsoft.com

  Update for Windows 7 (KB2454826)

  Download size: 4.7 MB

  You may have to restart your computer for this update is taken into account.

  Update type: recommended

  This is a reliability update. Install this update to enable a set of performance and features updated graphics, Media Foundation and the XPS components on Windows 7 systems.  After you install this item, you may have to restart your computer.

  More information:
  http://support.Microsoft.com/kb/2454826

  Help and Support:
  http://support.Microsoft.com

  Update for Windows 7 (KB976902)

  Download size: 4. 3 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Install this update to enable future updates to install successfully on all editions of Windows 7 or Windows Server 2008 R2. This update may be required before you can install the selected future updates. After you have installed this item, it cannot be deleted.

  More information:
  http://support.Microsoft.com/kb/976902

  Help and Support:
  http://support.Microsoft.com

  Windows malicious software removal tool - January 2011 (KB890830)

  Download size: 999 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  After the download, this tool runs once to search your computer infections by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and remove infections found. If an infection is detected, the tool displays a status report the next time that you start your computer. A new version of the tool will be offered each month. If you want to manually run the tool on your computer, you can download a copy from Microsoft Download Center, or you can run a version online from microsoft.com. This tool is not a replacement for an antivirus product. To help protect your computer, you must use an antivirus product.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=39987

  Help and Support:
  http://support.Microsoft.com

  This thread seems to describe the problem you are experiencing:

  Windows 7 - KB2454826 fails and only recover after reboot

• Windows does not start after the installation of Service Pack 3 for Windows XP

  Hey guys I have a question I received this automatic update (Windows Service Pack 3) I am running Windows XP Media Center Version 2002, the problem I have is after installation of the update my computer guard stop and windows not not start, I had to go back to my computer to a safe point (usually before the update) and I say usually because I already tried to install this two update times with the same result.

  I hope you can help me I really need your help, I'm totally distraught and I received the update to install it but I'm afraid to install fearing that my computer will not start.

  Thank you.

  Hi Crickets1,

  1 did you receive an error during the shutdown process?

  I suggest that you refer the below Microsoft article and try the steps mentioned to do before you install Windows XP SP3.

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows does not start after update, but starts in safe mode

  last night my laptop set to day, I turned it off and when I started today he went straight to the safe mode selection screen. I chose to start in normal mode where it just went to blue screen, just a flash so I couldn't read what is on it and then restarted itself. I then chose safe mode with network boot and he finished making the update without problem, so I rebooted and tried to start up normally, but still it restarted itself, so I went back to safe mode which is what Im use it as today.

  as far as I know that it does not crush power or coward during the update and cannot think it's updating itself that causes the problem. Ive tried to do a system restore but it says theres no restore to restore points.
  Can someone please help me because running in safe mode is maddening as theres no graphics driver and the resolution is horrible.
  Thanks in advance
  Hayley

  Maybe a start of repair:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/startup-repair-frequently-asked-questions