Windows Easy Transfer error

Similar Questions

• I get the error message "there was an error of analysis of the data on your system" when you try to use Windows Easy Transfer

  Original title: there was an error of analysis of the data on your system

  I get this error when trying to use Windows Easy Transfer to prepare to move from an XP PC to a Windows 7 PC. It passes through the part of the selection on where I later import files then says he is scanning the disc and fails with the above error.

  In the search for this error, I found information of 2007 could be be a nero problem AVI.  I don't have Nero installed and I can't find the log files in the directory MIGWIZ.

  It is a small (50 GB) HD who do not have much space available on it (I'm not in front of it now).  Is there a minimum amount of free space needed to run this executable? That is why it is a failure?

  Could there be other issues behind this failure?
  Thanks in advance

  Hello

  Follow these methods and check if that helps.

  Method 1:

  I suggest to download from the link provided below windows easy transfer tool and install it and then try to transfer the data back.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  Method 2:

  Refer to step 2 and step 4 from the link provided below:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

   

   

  Method 3:

  I recommend you to try different types of transfers using different media. You can also do a disk clean up of the Windows XP computer. Remove unwanted programs from the Windows XP computer. Do a disk clean, right click on the C drive, and then click Properties. Clean, then click on the disc.

  For use with different media windows easy transfer, you can click on this link for steps to follow:

   

  http://Windows.Microsoft.com/en-us/Windows7/transfer-files-and-settings-from-another-computer

   

  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

• Windows Easy Transfer for Windows 7 has fatal error on XP system

  Transfer worked for anout an hour then the old computer updated automatically and restarted. During the reboot of "Windows Easy Transfer for ws 7" after the message to plug the easy transfer cable, a fatal error occurs and the program stops.

  Any suggions on how to start the top yet?  The new computer is looking for the connection.

  I'll make sure that you use the correct version of Windows Easy Transfer in Windows XP to Windows 7.

  If you have a 32-bit computer Windows XP use this version:

  Windows Easy Transfer for transferring from Windows XP (32 bit) to Windows 7
  http://www.Microsoft.com/download/en/details.aspx?ID=4503

  If you have a 64-bit computer that is running Windows XP, use this version:

  Windows Easy Transfer for transferring from Windows XP (64 bit) to Windows 7
  http://www.Microsoft.com/download/en/details.aspx?ID=9926

  Download the right version and see if you get the same error. If you get an error message, please cut and paste the exact error, so we can see it.

  Answer please come back and let us know the result.

  Marilyn

• Windows Easy Transfer fatal error

  In the past, I used Windows Easy Transfer to save and re - install the data when I had to reformat my Toshiba L650 / laptop Windows 7 Pro.  Now, whenever I try to access Windows Easy Transfer tells me that there is a fatal error.  How can I fix this, please?

  I've seen since post September 25, 2010 from gogreennatlanda to http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/windows-easy-transfer-encountered-a-fatal-error/26734892-8cb1-4e0d-be80-a79a68e256ca?page=2&tm=1315363879085#footer.  Remove the Migwiz in AppData/Local folder identified by gogreennalanta solved my propblem.  Thank you gpgreennatlanda.  4 years and the system continues to create this problem.  I would hope that would not be so.

• "update does not apply to your system" error when installing Windows Easy Transfer for Vista 32 bit

  I downloaded and tried to install this update from my 32-bit Vista system and has received a notice of error "update does not apply to your system.

  Hello
   
  
  In Windows vista and Windows 7, you don't have to download Windows easy transfer.
  Windows easy transfer is incorporated.
  See the links below:
  
  Transfer files and settings from another computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/transfer-files-and-settings-from-another-computer
  Transferring files and settings: frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questions

• the error message "Windows Easy Transfer for Windows 7 is for a different hardware platform"

  When I try to install Windows Easy Transfer for Windows 7 to receive files from my old computer running XP32 error message appears "Windows Easy Transfer for Windows 7 is for a different hardware platform"

  What version of Windows 7 you are running 32-bit or 64-bit?

  You try to install the correct version of Easy Transfer?

  There is a 32-bit version and a 64-bit version.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

• I get an error 0xc0000142 during execution of Windows Easy Transfer.

  Original title: Windows easy transfer does not work

  I anm try to transfer a profile of an old XP machine to my Win 7 PC.

  When I try to run Windows Easy Tranmsfer on the Win7 PC I get an error Application failed to start correctly (0xc0000142)

  How can I get it to work?

  You must use the Windows 7 PC easy transfer utility to create the file to transfer on the XP PC. The file generated by the XP version of the utility is not compatible with Windows 7

  On the Windows 7 PC to run the Windows easy transfer utility

  On the home screen select next and then choose the method of transfer (external drive)?

  Then select so this is my new computer, on the next screen, it asks if you have already saved your files, click on no, then I need to install it now.

  You can create the installation program on the device you want to use for the transfer as the external HARD disk or USB key. It will then copy the utility to transfer files on the selected device.

  Connect it to PC XP and run the transfer utility on the XP PC, which was created by Windows 7. It will recreate your file transfer but this time they should work on Windows 7 PCs.

• I try to install the windows easy transfer and I get the error.

  I try to install the windows easy transfer and I get the error, "the version of windows you have installed does not match the update you are trying to install.  I download and install the 32 and 64-bit version for XP.  I also downloaded and tried both 32 and 64-bit version for windows 7.

  On which version of Windows 7 you are trying to install Easy Transfer?  Easy transfer seems to be automatically installed on Windows 7. You run Easy Transfer on Windows 7 to 'prepare' the copy, you need to be running on the 'old' PC.

• "Windows Easy Transfer" function is NOT easy!

  I bought a new laptop and decided to try to move the old data by using "Windows Easy Transfer". There's NOTHING easy about it.
  "I created the MIG file, but when I try to drag it onto the external hard drive it gives me the following error message: the file is too large for the destination file system.

  I tried two different hdd with a lot of hard disk space. Both gave me the same error message.
  I want a solution to this nonsense.
  Thank you

  Uh, you're welcome?

  Please report all follow-up answers to your new thread: http://social.answers.microsoft.com/Forums/en-US/w7files/thread/c07b5cde-eee7-4380-9576-904521e6aad1

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Easy Transfer ends with the restart Message

  I'm trying to use Windows easy transfer to transfer files from my old laptop Windows XP 32 - bit for my new laptop Wn7 64-bit. I downloaded the XP application usng the laptop Win7 and transferred on the XP laptop and installed there. I used my network wireless existing as a transfer medium. I copied the transfer key from the old to the new laptop, and the transfer seemed to progress saying there were 390 files, which seems a little low. When 390 have been transferred, both computers will report the following error:

  Windows Easy Transfer is unable to continue. If please restart the computer and try again.

  I restarted once the two laptops and WET the results in the same error.

  Should I just try a different transfer method?

  Yes.

  Windows Easy Transfer and files and Settings Transfer seized were never so great because they are really made to move (IMHO) from one system to the other * at time of the original operating system release * because they start pretty quickly leaving aside the settings and applications.  Since you are going from Windows XP to Windows 7, use this:

  http://www.Microsoft.com/Windows/en-us/XP/transfer-your-data.aspx

  If you want to transfer both applications - you can spend a little money on the product (23.95 USDs as you move from XP) and get the professional version:
  http://www.laplink.com/pcmoverexpressxpeol
  [More precisely: https://store.laplink.com/59/purl-MSFTLP-ProXPBuyNow ]

  Good luck!

• Windows Easy Transfer for transferring from Windows Vista (32-bit) for Windows 7/8:

  I'm currently running Vista 32 bit and you want to use Easy Transfer to a new PC with Windows 7/8.  After you download the file, it seeks an update and then told me that my PC (Vista) is not suitable for the software. Any ideas where I should look?
  All available info indicates that it should work like a dream!

  Hello

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it seems that you are having problems with Windows Easy Transfer.

  1. which method do you use to transfer using Windows Easy transfer?

  2. What is the exact error associated to is not suitable for the software?

  Download and install the software from the link below and check.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14179

  Answer to us if you are having problems with Windows Easy Transfer or any other matter of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Easy transfer of Windows in Windows 7 does not recognize the files that I saved by using Windows Easy Transfer in XP

  Using WET under XP I created a USMT2 file. UNC.  Using WET in Windows 7, the only option is to search the hard drive a 'Easy Transfer' file - select the file I created on Windows XP I get the error message "no items matching your search.

  Hi Hippomenes,

  Take a look at this tutorial for help in transferring your files with Windows Easy Transfer.  Let us know if that helps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Easy Transfer can only transfer files

  I created an easy transfer file in my previous installation of Windows 7 Ultimate 32 bit. After formatting and installing Windows 7 Ultimate 32 bit even once, I got the following error:

  "Windows Easy Transfer can only transfer files

  Your easy transfer file was created on a computer that is running a different language than this computer. Windows Easy Transfer only transfers files between computers with different languages. Settings will not be transferred. »

  The problem is that the two facilities were in English...

  -What can I do to solve this problem or my parameters are irretrievably lost?

  You can see your language here: HKLM\SYSTEM\CurrentControlSet\Control\CMF\SqmData\BootLanguages. Are the same in the two versions of Windows?

• Windows Easy Transfer refuses to start. How can make us it work?

  The old laptop of my son is a Windows 7 laptop. He recently bought a new laptop for Windows 8.1, and naturally he would like all its data, etc. migrate to the new machine. So naturally he's trying to use Windows Easy Transfer, but it does nothing for him. Whenever he tries to run it, it gets this error:

  Window easy transfer has encountered an unrecoverable error. Pleas restart the application.

  There is no other errors than that. He tried to launch Windows Easy Transfer normally and as an administrator; always had this error.

  He tried to connect in safe mode, but he refused to run Windows Easy Transfer at all.

  We have grown to a prompt as an administrator and run SFC/scannow, but it is no problem at all. All is well for what is Windows 7, Windows Easy Transfer should work. But he is not and refuses to start.

  We even chose to return to a previous restore point, but who does not work either.

  Since all this can't work, how in hell are OK, we supposed to get Windows Easy Transfer to work on this old machine Windows 7 when it will not be under all the circumstances I've specified here, work?

  (Moved to programs)

  Hi Rod,

  I apologize for the delay in response.

  It is likely that the Application cache is corrupted and causing this problem.

  Please, try the following steps:

  1. Go to "C:/Users / / AppData/Local'." "
  2. Delete folder named Migwiz.
  3. Try to run the transfer Windows Easy now.

  Hope this information is useful. Response please that if you need assistance or have any other question about Windows, we're here to help.

• Windows easy transfer. I can't use transfer to move files to the new computer

  I used windows easy transfer to back up my files to an external hard drive before doing a clean install of windows 7, XP.

  I am unable to find any "windows easy transfer" files on the hard drive for transfer to the new computer.

  ALL the files from my old computer are there and I am able to access it from the external hard drive.

  Please tell me there is an easy way to transfer files and I don't have to do it manually.

  What is the error message when you try to restore files in Windows 7?

  Also, did you really use the Windows Easy Transfer Wizard to back up your files or did you use the built in the files and Settings Transfer wizard in Windows XP? If you used the files and Settings Transfer Wizard, that won't work no.

  You must install Windows Easy Transfer on Windows XP, save the files as one. MIG file on your external drive, restore it on the Windows 7 computer. See for instructions:

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/