Windows id password problems

Similar Questions

• Windows 7 password problem: does not recognize password after waking from sleep

  So I have recently buy a netbook with Windows 7 operating system. I create the administrator account and password protect. All right, install software, copy documents, etc. in the "My Documents" folder and happily use the machine for a few days with no problems. Then work off the battery voltage, put the PC in sleep for some time. When I try and log back in after the awakening of the PC, it does not recognize the password. Try with cap locks, off and all the rest, but not luck. I must finally remove the battery and restart. Sign in as normal (the password is recognized) and go in the user administrator account to disable the password, but then again, the current password is not recognized and I am not allowed to make changes. However, I can still close and log on by using the current password. Confused. Anyine have any ideas?

  There is no need to remove the battery or pull the taken when force a PC to stop. By pressing the power button for about ten seconds will do the trick.

  Your password problem: you might be dealing with a foreign keyboard problem. Make the password to something that is independent of the keyboard configuration, for example 123456.

  To reset the administrator password, follow these steps:
  1. click on start.
  2. type the three letters cmd in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following commands and press ENTER after each:
  net localgroup administrators
  (This will show you the accounts that have administrative privileges. What is?)
  NET user administrator 123456
  (This will set the password to 123456)

• Windows Easy Transfer password problem

  I had problems with my computer then before sending it for repair, I saved all my stuff on an external hard drive. Now I have my computer is back with a new hard drive and would like to transfer the information on the external hard drive on my computer repaired with the new hard drive. The files and what-not are save to the external hard drive as one. MIG file. I plugged the external hard drive to my computer then "computer" then "E: (external hard drive). I clicked on the. MIG file and before you start Windows Easy Transfer it tells me that something is opening and if I'm the one behind him to click on "continue". I click on 'Continue' and then a Windows easy transfer opens and asks me a password. I type the windows admin password and it tells me it's the wrong password. What is the password that is supposed to be if not the password admin I looked around and it doesn't seem like there's a kind of generic password (for example, 1234). What should I do?

  I hope that someone a this forum can help out me.

  Thank you

  Honsei

  Hello

  To add to what Mr.SuzukiBiker commented, this isn't the admin password it takes here, but the PASSWORD KEY.

  Follow the steps mentioned in the article to create a new access key.

  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html (See Fig.9)

  Hope this helps

• Key to Windows 7 password reset problem

  I have created a key to reset Windows 7 password on a USB key according to the instructions. When I tested it, the computer he labeled as being in drive F, but he gave only the insert options in the G or H drive. The only way I could make it work was to use two players to jump. Then he would see the reset key in the drive I have and I would go forward. How can I fix?

  Cindypcdoctor,

  Please note that post password cracks in any forum Microsoft violates theCode of conduct. Please read the document and comply with its policies. We have deleted the post in question, but be aware that you may be forbidden to publish in all instances of Microsoft if continuing violation. Thank you for your cooperation.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Printer problems due to software on my windows vista desktop problems

  They told me that I have a software problem on my windows vista desktop, because - my printer print test page, but seems to have a communication problem with some of the jobs I want to print. I can't right click and print. Someone at - he heard of this problem and might be able to give me some advice?

  Hello

  1. What is the exact error message?

  2. What is the brand and model of the printer?

  3 have there been recent changes made on the computer before the show?

  Please follow the steps below and get back to us with the results.

  Method 1: Run the Microsoft fixit and check if it helps.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2: R the print service spooler and verify.

  You must be logged on as administrator to perform these steps.

  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Update the printer drivers and check.

  Find and install printer drivers in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Update drivers: recommended links.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  For more information, see the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps!

• Easy transfer password problem.

  I try to use Easy Transfer to transfer to an old PC (XP) to another (Vista Home Premium 64-bit).  During the creation of the CD on the old computer I did use a password.  Now that I'm trying to load the CD on the new computer, I get a message that says "the passwords do not match."  Any help would be appreciated.

  Hello

  During the easy transfer it does not prompt you a password. So could you please brief me in what concerns when it's to ask a password?

  Try to connect as an administrator and then try to transfer easily.
  Try the windows vista password and see if it helps.

  Please go through the links for more information below
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-transfer-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questions

  Windows easy transfer
  http://support.Microsoft.com/default.aspx/KB/928634

  File transfer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-transfer-problems

  Thank you and best regards,

  Bindu S Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows sidebar calendar problem, sees nothing except chassis. How can I solve?

  Windows sidebar calendar problem, sees nothing except chassis. How can I solve?

  Hello SEEN H K,

  1. this work was very well at any time before your computer?

  I suggest that you try the methods below to resolve this issue:

  Method 1:

  Open a windows Explorer window and then paste the following text in the address bar:

  %LocalAppData%\microsoft\Windows sidebar

  This will open the Sidebar gadgets folder, where you should see a file named Settings.ini.

  If this is due to recent changes to the computer, I suggest that you do a system restore on your computer.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can see the following article for reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• My email password problems

  I'm stuck on my email due to password problems. Everytime I try and connect, I have this problem and I am notified that an email be sent to my address Advisor how to get a new password. I can't connect to my e-mail address to get the email sent to me.

  If Windows Mail, etc., contact your ISP (Internet Service Provider)

  If Hotmail, repost in the correct Hotmail Forums:

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  See you soon.

  Mick Murphy - Microsoft partner

• Printer requires an access code to the user instead of windows and password connection?.

  I was see the printers to HP asking (LaserJet M4555 MFP color LaserJet 500 MFP M575 etc.) for access instead of windows and password connection code.

  One thing I noticed, is that when this happens there is a slight change in the EWS page configuration to security-access control >. The device administrator tabe is off, as you can see below ehen what happens

  

  Tried cold reset the printer and restore settings, but it does not work and some thimes it works for awhile but the problem has returned.

  We should not promt instead access code we need to connect normal windows and used password be there originally.

  The current configuration on your screen shows that the method, on the last column in the table header, log by default is set to the Local device. All permissions are also set using the default method ('use default' in the column 'Sign In method').

  In order to use the Windows authentication method, you must configure the sign 'Windows' in the method on the section above:

  

  Then set the default value 'Sign in the method' of the table of authorities 'Windows '.

  Kind regards

  Eduardo_G

• I forgot windows live password, how to get back to zero?

  Original title: forgotten password

  I need help... I forgot that my windows live password, how ever my computer can still log me in my email because I used the remember me feature... I tried to reset my password option however I can't reset my password... any suggestions. is there a way I could send an email to microsoft for my email.

  Is Devon

  Start here: password forgotten and other connection issues

  If you still have problems signing in, open a support ticket by submitting a form on the support Microsoft account page. There is no agent of active support in these forums.

• How to reset Windows 7 password with USB

  The first thing we often do when we * password lost Windows 7 * is to ask an it expert for help. However, it is only a moment for you * forget password Windows 7 * and it may take you several days to regain access to your system. Later, don't worry about anything when you forgot the password for windows 7. The article will give you some ideas for * reset password Windows 7 * with USB drive.

  * Chapter 1: Reset password reset Windows 7 password disk.*

  Most people know generally only how to create a new user with a password or change it. But they do not develop a habit to create a password reset disk to prevent the lost password. This is an excellent and free Microsoft gift. Click here to learn how to create the password reset disk in windows 7 If you loan have a reset disk, follow these steps:

  Step 1: Start or restart your computer, insert your USB key. In the home interface, press ctrl + alt + delete, enter the classic logon box. Then type the user name that you want to use and a wrong password or leave the field blank, and then press ENTER or click OK. It will show you logon has failed.

  Step 2: Click on * reset password *... it will show you the password reset Wizard. And it allows you to create a new password for your user account. In the password reset Wizard dialog box, click on * following *.

  Step 3: Select the disk that you insert, click on * following *. Type a new password in the Type a new password box, and then retype the password in the Type the password to confirm box. In the Type, a new indication of password box, type a hint for the password or no, and then click on * next * → * finished * and then try to open a Windows XP session again when to use the new password you just put.

  EC * USB password reset disk * use only in a certain account that you have created before, or it will not help. Therefore, it is best to create a password reset disk when you add a password to the account.

  * Section two: Reset Windows 7 password Windows password rescuer run from USB drive

  If you have not created a password reset disk for your account and unfortunately you lost or forgotten windows password, see below. I'll show you a guide step by step to do this task in minutes with USB, without reinstalling the system or loss of data.

  Step 1: Prepare a 2 GB USB flash drive and a computer that you can access.

  Step 2: Download Windows password of lifeguard and install it on a computer on which you have access.

  Step 3: Run the program and burn the ISO image to the USB Flash drive.
  * NOTE: * this action will make your formatted USB drive and all data in it will be lost. You would provide better with nothing in it.

  Step 4: Use the USB to reset the password of windows 7. Before this, you must set your start your computer by USB. Then start your computer and enjoy the process of resetting the password, it is easy and fast. Don't worry if you are struggling for the parameter, you can see more in the Windows bios password rescuer website.

  Posting of interest. Thanks for this detailed description and useful links.
  If you have more interesting things to share with us you are welcome.

• Viable way Top 2 to create Windows 7 password reset disk in all conditions

  This article describes how to create and use a disc to reset password of Windows 7 to a computer before and after that you forgot the password. You can use Windows 7 CD to reset password to access your computer.

  Scenario 1: I put t forget the password again.

  Windows 7 has its own backup feature, and you can create proactively a Windows 7 password reset disk before you forget it. With it, you can easily reset your password of Windows 7 and do things in your PC.
  Follow the steps below to create a reset disk of your own Windows 7 account password. Here's how:

  Note that this procedure requires a formatted blank floppy disk.

  1. click on 'Start'-> "control of the accounts of users and family safety"->""-> "user accounts".
  2. in the task pane, click "Create a password reset disk". The wizard 'forgot password' is displayed.
  3. click on 'Next' and choose the portable media player.
  4. click on 'Next', then enter your current password in the following box and click "next".
  5. Windows 7 starts to create the reset disk of password on your chosen media. When the progress bar reaches 100% complete, click 'Next' and then click 'Finish '.
  6. now you can remove your device and store the disk in a safe place. Once you have forgotten the password in the future, you can take it out.

  Follow the steps below to use a password reset disk to recover password of Windows 7. Here's how:

  1. the created disc of password can now be used for log-ins to reset the password. A password reset link appears on the account screen after an unsuccessful attempt to open a session.
  2. click on "password remains", and opens the dialog "password reset Wizard". Here, you will have to insert the disc to reset the PC.
  3. follow the wizard to enter a new password twice to make sure that you type the password. You are proposed to create a new indication of password, so that you remember the password with it if you forget.
  4. Windows switches to Windows Journal in the new screen where you can use the new password to connect.

  Scenario 2: I already forgot the password.

  If you have forgotten your password to Windows 7, but don t have a password reset disk on hand, you can choose another way to reset the password.

  Here's how to create Windows 7 password reset CD/USB:

  1. this procedure requires a USB flash drive or CD. Insert your media device into another computer that has access to the system as administrator.
  2. launch Windows 7 password reset software disc. On the main interface, choose "reset the local Windows account password.
  3. choose your target device, and then click "Burn" start Windows 7 password reset creating the diskette.

  Here's how to reset the password of Windows 7:

  1. with this software Windows 7 password reset USB, start the computer that you want to reset the password.
  2. under Windows PE, can access you the main interface of this software. Choose your Windows system and select the user account you want to reset the password.
  3. click on 'Reset' and then 'Yes' & 'OK' in order to remove the password of Windows 7.

  Pretty easy, isn't it? After that the system control password reset completely, you will never worry your bad memory

  + The message was edited: link has been removed.

  Very interesting announcement.
  Thank you.

• HP Pavilion: starting windows without password 10

  How to start windows without password 10? I took the check mark from the user must enter the password, but it did not help, I still have to enter password at startup.

  Hello

  Please use the following configuration:

  http://www.windows10forums.com/threads/how-to-disable-login-screen-on-win-10.165/

  Kind regards.

• HP655 update for windows 8.1 problem with Realtek driver

  Need help with the problem addressed in another forum HP.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/HP-655-update-to-Windows-8-1-problem-...

  The last message point far on this forum to get help.

  -----------,

  Install the new Bios and the network works

  655 HP

  Updated HP Notebook System BIOS (AMD processors)

  Version:

• How can I remove the Windows Administrator option I forgot Windows administrator password

  original title: How can I remove the option Windows Administrater I forgot the Windows Administrater password

  I chose option Administrater, and now I hate it.  I can't do anything without having to type Administrater password and I don't remember the password.  How can I change my Administrater account to another

  Hi PatriciaLevy,
  

   

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

   

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126