WINDOWS: IMPOSSIBILE ACCESS HAS \\SAMBA24 CODICE ERRORE0X80070035

Similar Questions

• Whenever I click on recorded TV I get this message "Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Title: original problems to access TV on Windows Media Center recordings

  My media center has suddenly stopped working for recorded tv.  Whenever I click on recorded TV, I get this message:

  "Windows Media Center has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  All other features of the media center work correctly.

  Any help would be appreciated.

  Hi vater19,

  Remember to make changes?

  Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference

  Open the Setup TV tuner Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receives the following message after opening a downloaded game: 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  Hello!
  So I'm at the end of my rope with this one... it lasts for months, and I keep revisitng every two weeks to try and fix that and every time to be completely frustrated.  I found this forum tonight, so here goes...

  We downloaded a few games on the HP Games Web site.  We download them and everything works fine.  Then, we will open the games and this pop up error message:
  "Windows cannot access the specified device, path or file.  You can not have the appropriate permissions to access the item.

  These games used to run fine, and I have no idea why they now have problems.  We have a Vista operating system, 1 account who is the administrator, the Parental control is disabled (or if we believe).

  If anyone can please help it would be much appreciated!  We have a monthly membership to this site of game and continue to accumulate credits, but may not use it.  It makes us crazy!

  Thank you in advance!

  Hello Heathie,

  Thank you for posting.  It seems that the program is no longer on your computer.  This can happen if the game files are deleted, but the game itself has not been uninstalled correctly.  I recommend you to download the game again to a location on your computer where you can easily find and install it.  This should fix the problem.

  Please let me know if this helps you.
  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot access the specified device, path or file. You have no permisions them appropriate to access the element.

  XP tells me high when I opened a shortcut of the exe from my office. (PC-1)
  The shortcut points to an exe file that is located on another pc xp on my peer-to-peer network. (PC-2)
  Other PCs on the same network work very well do the same thing. In my research on it, I think it has something to do with me changing the name of PC - 1, after that I created the shortcut. (the shortcut works prior name change) Recreate the shortcut is not do me everything right.
  Unfortunately I do not have restore points to return and I have no restore for this PC no more disks.

  Help! What can I do?

  Hi yellow Jeeper,

  Would you happen to use Internet Explorer 7?

  Please take a look at this article about your mistake with a possible correction, applications of network share Installation generates an error: 'Windows cannot access the specified device, file, or path'.

  I hope this helps!

• I noticed that my remote access has been activated twice in a week but I did not. no way to verify when, what, who activated via the event log,...?

  I noticed that my remote access has been activated twice in a week but I did not. no way to verify when, what, who activated via the event log,...?

  Hi dewthisnow,

  The information office for remote access must be in the security log.

  For more information, see:

  To disable remote desktop

  To view the logs in Event Viewer, see:

  Using the event viewer        

  Procedure to view and manage event logs in Event Viewer in Windows XP

• Windows Media Player has encountered a problem and needs to close, heartbreaking.

  Recently, while ripping the cd to Windows Media Player 11 on XP Service Pack 3, I'm frequently getting the message "Windows Media Player has encountered a problem and needs to close."  It happens usually during the second or third disc.  I then close and reopen and am immediately able to rip the CD.  Sometimes the player will immediately be closed as soon as I click on "start rip."   Any ideas?

  The same thing happens if you rip to MP3 or WMA?

  Post here the technical details of the accident. Go to Start- run , type eventvwr.msc , and then press ENTER.

  In Event Viewer, access to the application log and look for an error in the list, there should be two entries for the last crash. Double-click on these two events and copy/paste their description in your post.

  Tim Baets
  http://www.BM-productions.TK

• Windows Media Player has encountered a problem...

  "Windows Media Player has encountered a problem during the synchronization of the file to the device. For any additional help click web help. »

  This is the last error I get. Web site of Microsoft, and then said: you received the C00D1236 error message when you use Windows Media Player. Cannot sync the file.

  So, what led up to it is:

  1 problems with the device for a long time.

  2. Finally studied and found the latest firmware and update the device. This fixed some problems, which is excellent, but caused worse problems.

  3. I was getting: "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "on several random files. He could do and then if I deleted everything and tried again, it could do with different files. He took too long between files during synchronization. So, I found this post: http://forums.sandisk.com/sansa/board/message?board.id=clip&message.id=18501&query.id=12003#M18501 and formatted with Windows Media Player. (I've now formatted every way possible, I think.) Of course, we fixed it. Problem files synchronized immediately, but then almost all my other files could not synchronize with the most recent error.

  A. in addition, the playlist does not work. Even if I get the playlist on the device, there is no songs in there. Songs/podcasts are only available through other classifications.

  B. After you have installed the program to update the firmware, there is now a remnant TSR who dies when I plug my video. "Universal firmware updater for Sandisk Sansa MP3 players has stopped working". Can I disable or uninstall this program, but it's just another problem. I am running Vista with all latest patches.

  Any help? You will be able to synchronize all files and playlists will work well.

  AHA! I think that I thought about it. I deleted all files in the Cache files of Player\Transcoded of AppData\Local\Microsoft\Media and now everything is sync again.

  He always does this weird thing once again. When the screen is black and I'm listening to something, if I hit the ring of command, as for example, hit the screen do not necessarily come back. I guess I should start another thread for this. It seems that there are different features that work better or worse according to the USB mode. I didn't know there was such thing before this problem.

• RootKit/Malware/Virus problem - windows cannot access the specified device file or the path, you don't have permissions

  Hello

  I have a problem with my computer it has been infected by a virus that is not visible in normal mode. It prevents running any application that would help in the detection and removal. I tried running mrt, mcaffe, trendmicro rootkit detector rootkit detector, spybotSD, analysis windows Defender online Windows live onecar. All these works for a minute and then shutsdown, when I click it again I get the error, as mentioned in the title, 'windows cannot access the specified device file or the path, you do not have permissions.

  This problem has a solution or re - install is the only way out?

  The pointers/help appreciated.

  Just to add, I am able to connect using my last known good configuration and only safe mode configurations.

  Thank you

  Id2View,

  1. follow all the instructions in this thread: How to get rid of malware

  2. If still no joy you can find Microsoft MVPs and other trained analysts on the following support sites:
  Aumha.org
  Atribune.org
  SpywareHammer
  BleepingComputer
  Safer-Networking

  3. If you need help with virus-related issues, contact the Support Services Microsoft product.

  To support the Canada and the United States, call toll-free (866) PCSAFETY (727-2338).

  For support outside the United States and the Canada, visit the page Web of Product Support Services.

  4. If you need more assistance for the position of the newsgroup Microsoft - security - virusvirus/worm.
  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Security.virus
  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virus

  Hope this helps,

  Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  Hello

  I recently changed to use AVG free Antivirus Vista 2010 edition and since then (next day) seems to be locked out almost everything on the computer other then IE.  Open any kind of .exe translates into "Windows cannot access the specified device, path or file. You don't have the appropriate permissions to access the item. "I can access the Control Panel, but when I try to run something (a user restore Sys account) nothing happens or I get the same error.  I can not even access/cmd?

  Operating system is vista 64 bit home premium
  Computer has 1 which is defined as administrator SP1
  Tried to do a restore of the system in normal mode and safe, the two will not start.

  I have a feeling I know what the problem is, that when you look at the properties > Security "Progam files" in the 5 groupnames user administrator has not enabled in the lower area of permissions?  Guess a virus has locked all accounts to use the machine key files? (When editing and allowing the admin to have full control etc. in written authorization, I get an "access denied" Message.)  Be honest this really problems out of my PC knowledge, I would usually just reformat if I hit I can't solve a problem, but this time reformating is not the best option.

  Thanks in advance for any help, I would really appreciate it, it left me speechless!

  PS. read through the similar questions and have used the "fix windows' programs, with nothing working or me being not able to access something used.

  Hi Dany88,

  First of all, I would say that you uninstall security antivirus vista 2010 of computer software, since there are several questions on the computer after installing. This software may have created conflicts between other programs on the computer.

  As you face problems to access items from 'Control panel', I would say you visit the security software vendor's Web site and search a tool of suppression using which you can uninstall the software.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If questions are set after uninstalling security software, I suggest that you change the security antivirus vista to some else software or contact the vendor of the software for more information.

  I would also say that you are investigating the computer by using the methods mentioned in the link below.
   
  How to get rid of malware or viruses
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  See the link below to find out how to start in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: Windows cannot access the disk.

  I burned a dvd backup of certain data (downloads, bookmarks, photos etc.) files using windows drag and drop in the dvd player.

  The burn has been successful I was able to use it immediately, however, on the second (and subsequent) attempts to access the files burnt a windows error appears indicating that windows cannot access the disk.

  Like all other discs are able to be accessible to all without problems, there is no problem with dvd players?

  Please let know us that it's the only backup I have these files.

  I burned a dvd backup of certain data (downloads, bookmarks, photos etc.) files using windows drag and drop in the dvd player.

  The burn has been successful I was able to use it immediately, however, on the second (and subsequent) attempts to access the files burnt a windows error appears indicating that windows cannot access the disk.

  Like all other discs are able to be accessible to all without problems, there is no problem with dvd players?

  Please let know us that it's the only backup I have these files.

  ========================
  If these files are very important... the
  software suite may be worth a try:

  IsoBuster
  http://www.IsoBuster.com/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I'm checking my diary CBS.log but my access has been denied.

  I'm checking my diary CBS.log but my access has been denied, so I open my cmd prompt in Admin and typed in c:\windows\logs\cbs\cbs.log and he always says access denied.

  Hello

  Copy the cbs.log newspaper in your Documents folder and then you can open it. It will be big enough.

  If you try to check the SFC error reports using these methods which makes it much easier to read that
  the CBS.log section.

  -----------------------------

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot access internet without going through "Online Help & Support." ("Windows cannot access the specified path. You cannot ot have permission.)

  Problems: Access to the internet.    2. right of PC, for example, clock, Favorites, etc. does not appear on the screen while booting.

  3. cannot access the Micro password

  Error message: «Windows cannot access the path specified...» »

  When I'm online through the icon help & Support, still cannot access all the other icons; needs access to sites through links.

  First of all, there is problem when I played the game on 'brightness (MySpace link); PC seems to crash and the problem has continued since then.

  I have no idea what to do and I'm a bit of a novice.  In addition, have physical difficulties which slows me down or interferes with the ability to work through problems.

  Applications and links of Facebook can be very dangerous. Please start with the basics to ensure that you are working from a clean base. You will need to obtain the tools of a different, known-clean computer with access to the Internet and put them on a USB stick to transfer to the affected machine.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

  MS - MVP - Elephant Boy computers - don't panic!

• On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "Please help

  On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "This message appears for firefox, AVG, Windows live messenger, windows MediaPlayer etc.

  I can access my documents, Panel etc. and everything is there, but it won't let me not get access to the programs.

  Also when I go to click on itunes and open office it happens "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel.

  Given that I was able to access control panel, I was able to create a new user and use it for now to send this message and all programs have worked on it and I was able to check for the presence of viruses on the Avg on this and everything was clear.

  Could you please explain whats wrong and tell me how to fix this please: D thanks

  Hello
   
  1. don't you make changes before the show?
  2. is the computer is joined to the domain controller?
   
  You can not start any application on a client computer that is joined to the domain controller. When you try to start this type of application, you receive an error message similar to the following:
  "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  This can also occur if the user account is damaged. If the computer is not connected to a domain controller, try the following steps.
  1. connect to another user account and create a new user account to fix the damaged user account.
  For more information about creating a new user account and the fixing corrupt user account, visit this link: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
   
  Previous post the results in more detail, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Windows cannot access the specified device path

  I have a HP 2000 laptop with windows 7. I had problems playing a dvd. I can burn images and photos of viev on cd. When you try to play a dvd a message-" Windows cannot access the specified device path. You can have not permissions to access this item. "I uninstalled the drive so it is reinstalled on reboot of windows. I used to get a flag asking what program to open with. Now to see "cd" should open in my computer.

  I use Google chrome.

  Hey @Stern07 ,

  Welcome to the HP Forums!

  I understand that you are unable to play the DVD on your laptop of HP 2000 by using Windows 7.

  There may be an easier way to solve this problem, but it's the method that I am referring usually to when having this problem:

  1. launch Regedit (Windows key + R > type regedit > click OK).
  2. navigate in the tree of HKEY_CLASSES_ROOT > DVD > shell > play > order.
  3. double-click on the (default) value on the right side of the split dialog box (String edit dialog box should appear).
  4 copy the contents of the value data field.
  5. click Cancel on the dialog box change the strings.

  Figure 1:

  6. right click on the right side of the split dialog box
  7. Select new-> expandable string value

  Figure 2:

  8. just press ENTER if the cursor is what allows you to change the name of the new value
  9. double-click on the new value that you just created (Edit String dialog should appear)
  10. glue the string that you have already copied in the value data field
  11. click OK in the Edit String dialog box

  Figure 3:

  

  12. now on the left side of the split dialog box, highlight the folder HKEY_CLASSES_ROOT\DVD\shell\play\command
  13 right-click and choose export.
  14. save this file in a location of your choice and a name of your choice.

  Figure 4:

  15. close regedit.
  16. go to the location you saved the file.
  17. right click on the file, and then choose the Edit option (expected to launch the file open in Notepad (or any text editor).
  18. you should see something similar to (not just copy and paste what I have below, because this PC has installed WinDVD):

  [HKEY_CLASSES_ROOT\DVD\shell\play\command]
  @= "Files \"C:\\Program (x86)\\InterVideo\\WinDVD\\WinDVD.exe\ '%1'.
  "New value #1" = hex (2): 22, 43, 00, 00, 3 a, 00 5 c 00, 50, 00, 72, 00, 6f, 00, 67, 00, 72, 00, 61,------.
  00, 6 D, 00, 20, 00, 46, 00, 69, 00, 6 C, 00, 65, 00, 73, 00, 20, 00, 28, 00, 78, 00, 38, 00, 36, 00,------.
  29.00, 5 c, 00, 6F 49, 00, 00, 00, 00, 65, 64, 00, 72, 56, 69, 00, 74, 00, 65, 00, 00, 6f, 00, 5 c,
  00,57,00,69,00, 6F, 00, 44, 00, 56, 00, 44, 00, 5 C, 00, 00, 57, 69, 00, 6F, 00, 00, 56, 44, 00,------.
  44,00, 2nd, 00, 65, 00, 78, 00, 65, 00, 22, 00, 20, 00, 25, 00, 31, 00, 00, 00

  19. now delete the first line:
  @= "Files \"C:\\Program (x86)\\InterVideo\\WinDVD\\WinDVD.exe\ '%1'.

  20. now replace all in front of the remaining line with just the character = @, final result should look like:
  [HKEY_CLASSES_ROOT\DVD\shell\play\command]
  @= hex (2): 22, 43, 00, 00, 3 a, 00 5 c 00, 50, 00, 72, 00, 6f, 00, 67, 00, 72, 00, 61,------.
  00, 6 D, 00, 20, 00, 46, 00, 69, 00, 6 C, 00, 65, 00, 73, 00, 20, 00, 28, 00, 78, 00, 38, 00, 36, 00,------.
  29.00, 5 c, 00, 6F 49, 00, 00, 00, 00, 65, 64, 00, 72, 56, 69, 00, 74, 00, 65, 00, 00, 6f, 00, 5 c,
  00,57,00,69,00, 6F, 00, 44, 00, 56, 00, 44, 00, 5 C, 00, 00, 57, 69, 00, 6F, 00, 00, 56, 44, 00,------.
  44,00, 2nd, 00, 65, 00, 78, 00, 65, 00, 22, 00, 20, 00, 25, 00, 31, 00, 00, 00

  Figure 5: 

  21 save the Notepad file and close Notepad.
  22. now, double-click the file that you just saved, a warning must appear to say you want to add stuff in the registry.
  23. click Yes to continue.
  24. a dialog box should appear indicating that the values have been added to the registry.
  25 re - open regedit.
  26 cross to HKEY_CLASSES_ROOT\DVD\shell\play\command (you must already be there)
  27. now the value on the side right hand (by default) must have the same data as before, but the Type must indicate that it is REG_EXPAND_SZ

  Figure 6:

  

  28. now, try to reboot your PC and try to play a DVD.

  Let me know if it works!

  -Source: DVD movie: Windows cannot access the specified device, path, or file. etc

• error message "Windows cannot access the specified device, file, or the path."

  Whenever I try to open a file even my music internet explore or anything that I get an error message Windows cannot access the specified device, path or file.

  Hi nanditaberi,

  Since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

  This problem may be caused by this security software on the computer, uninstall them might solve the problem.

  Example: AVG, Zone Alarm

  Important:

  O before you uninstall the security software disconnect the computer from the internet. Make sure that the windows firewall is enabled.

  Ø you may need to check with the manufacturer of security software for reinstallation and activation.

  O re - install the security software on the computer.

  Reference:

  Please read the steps provided by, Donna, dated Saturday, January 3, 2009 14:01click here for the post.

  A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.