Windows install not installed correctly

Similar Questions

• Message says: "Windows could not load correctly" then he got the error: "0xa0000001.

  So I recently got these computer errors on my laptop. The pixels on the screen start to panic and it still restarts my computer.

  The first time, he started was when I was playing a game called League of Legends and it worked perfectly fine on my laptop, and he had always run around 70 fps. I played this game for a long time. Then, in the middle of an online game the screen flipped out and restarted my PC! He sent me a message saying: "your PC has encountered a problem :(. "

  After it restarts my laptop and then after restarting the pixels on the screen start to panic again and it restarted. After that restart again once he sent me a message saying he will "fix the problem on my PC. I clicked on 'Repair' and then it restarted again. After the restart he freaked out again and then it restarted and it gave me a message saying "your PC will convert at an early stage when it doesn't have this problem. This can remove files that have been installed recently. So, I allowed it do and after 3 hours of waiting he brought me to an earlier stage if my laptop was not the problem. He only come back in a few hours. Then the next day, I decided to try again in League of Legends, it was working fine and it launched the game. I was running on my normal fps then he started trolling and it fell to 12 frames per second and the screen flipped out again and then my computer restarted. Once restarted, it it worked fine after 5 minutes it restarted again, and then he gave me a message saying: "Windows could not load correctly" then he said I got the error: "0xa0000001. I turned on my PC and my screen has panic when he started, and then it restarted again give the same message and tell you have the error: 'DRIVER_OVERRAN_STACK_BUFFER '. It came on again and it was worse still panic then it restarted and it gave me the same message saying that you have the error: "BAD_POOL_HEADER". It restarts and several times with lit the screen always freak out so I decided to just remove the plug and ask for help. I went on the computer of my brother and sought a solution for these errors. Turns out Im not the only one to these errors. They say that '0xa0000001' error is caused primarily by an AMD graphics card and my graphics card is an AMD graphics card. The solution for this error is to uninstall the graphics card and reinstall it directly from the manufacturer's website. I could have made this solution and corrected my graphics card, but there is a problem. Whenever I turn on my laptop the pixels panic and sometimes the screen turns black and then it restarts. I can't access anything whatsoever, and he keeps just restarting. Please help me and tell me how to fix my phone :( I really need a solution to this problem.

  Please answer quickly :(

  Thank you

  There is an old saying that if it ain't broke, don't fix it.

  It works again.

  Read this information

  You need to get the Driver of your laptop computer software or a hardware manufacturer, not through Windows Update (with the exception of Microsoft put updated material), as Microsoft normally does nor those have the most recent drivers available as Microsoft leverages the hardware manufacturer 3rd party to provide them.

  Go to the website for your laptop or manufacturing equipment > Driver and Software Support Section > search your laptop or material style number > then your operating system > locate the correct drivers > download and install.

  ______________________________________________________

  But this is no guarantee that this won't happen again.

  Also, it would be that the game hardware requirements are higher than supports the hardware in your laptop.

  It could also be due to lack of graphic material.

  All you can do is search for the latest drivers and play games that require only a material that has your Lapyop.

  See you soon.

• Satellite U300 - Windows does not start correctly

  My U300 Vista Home run came in a boot loop: Windows can not start correctly and makes me want to use repair system, which failed and just makes me want to stop the computer again.

  I've tried without success, but failure mode it no more. I have a product recovery CD, but the system does not start from him. When I studied at the start, I saw that the BIOS does not detect the optical drive.

  Help please! Thank you.

  Hi nonprofit.

  You could try to load the default settings in the BIOS. Maybe it will be reconigze the CD/DVD drive again.

  Otherwise I think that it of necessary to replace the defective drive. Then, you would be able to use the Toshiba recovery disc again. This will restore factory in a few minutes.

• Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Original title: Mr

  Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Hello

  Here are the instructions Acer for recovery to factory settings, new condition.

  Select Windows 8.1 it.

  "Using Acer eRecovery application to restore your system or to create a recovery media.

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

  ACERS use these keys for years.

  http://Acer.custhelp.com/app/answers/detail/A_ID/35232/session/L2F2LzEvdGltZS8xNDQ0ODg5NTczL3NpZC9jRmhXNC15bQ%3D%3D

  See you soon.

• Windows is not stopped correctly

  I have a Windows XP and one day I started it up, and he says

  "Windows don't is not stopped correctly, please choose an option below.
  I thought, what must have been a power surge, it's happened before, so I just hit start Windows normally. He began to start and then a screen like the one before that "Windows is not stopped... '. "I tried other options, but it's just a continuous loop. How should I do?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If your system uses to work properly, what do you think might have happened to her since the last time, that it did not work properly?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• Tecra M2 - Windows does not start correctly

  My computer recently crashed and I suspect that this has affected the BIOS. I believe that the cause was a hardware problem or Trojan horse, as when the computer is restarted it will fail to load the BIOS at all 9/10 of the time. I found the Toshiba Tecra M2 BIOS V1.50 and it says it takes V0.06.00 of Modules common Toshiba, which was more difficult to find and could not solve the problem. Installation of an updated BIOS failure as well.

  For now, Windows loads up with lines running down the screen; When the windows startup failed and by displaying the "Windows did not start successfully screen', some letters are altered," soory for you e afconvenaence, but Wandows dad ngt star ^ correctlq'. "

  A new installation of Windows has failed to achieve anything more. If anyone has an idea how to solve this problem, it would be greatly appreciated.

  Hello!

  I think that it is a problem of material caused by the BIOS or the graphics card.

  However, it s not able to change the graphics card because it s soldered onto the system board.

  Perhaps an ASP can help you and do a downgrade from the BIOS, but I think that you need a new mainboard.

  Good bye

• Gmail message window does not display correctly

  I have windows 7. When I opened g-mail, the mail window shrinks and displays only who comes from the email and time of receipt. Other features and columns etc. on the page of g-mail display correctly. I don't have this problem in windows Explorer.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Windows does not load correctly, starts with a temporary profile

  Yesterday, I used my laptop and it worked fine I close it correctly went to the store, when I returned an hour later and turned on my computer Windows Vista home 64 bit would not at all be responsible.  I used my cell phone to get online and tried a few things and now 24 hours later became Windows to load, however he began with a temporary profile and all my photos, documents and programs are gone except via the box has changed mrecently, they are there.  I tried to restore a system but all my restore points have been deleted even the ones I did today.  I tried using recovery discs and it won't work.  I would like to pick up my items, I contacted Microsoft support and they will help me unless I pay $99. I don't have a lot of money for advice on everything I can do to help.  I can't get connected to my regular profile that tells Windows to check the event log, which I did and of course, do not understand what he says.  Please help to solve this problem, I'm afraid to shut down my computer as it is not sure that I will be able to return.

  Hello

  "However, he began with a temporary profile.

  See if that helps you.

  It is the Microsoft information when loading a Temp profile.

  "A temporary profile is loaded after you connect to a Windows Vista-based system.

  http://support.Microsoft.com/kb/947242

  And how to fix a corrupted user profile:

  "Fix a corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  See you soon.

• Adobe Acrobat 9 Pro: window does not display correctly

  I downloaded the latest version of Acrobat 9 Pro.

  Now, when I open several documents, I have problems.

  -When I opened the first document, the document appears correctly (the screen fits correctly)

  -When I open the second document, the title bar of the window is cut off (in other words, the title bar above the top edge of the computer screen)

  I can not access the title bar or the bar in the second window on my laptop without resizing the window screen.

  I use Windows 7 64-bit, with the custom view (110%) font size. My screen resolution is set to the recommended setting for the laptop (1366 x 768). I can't use the small fonts.

  How can I get my documents is displayed correctly when I open multiple documents? As a technical writer, I need several documents open.

  Hi d_r_reid,

  I had this problem for a few days now that I just started to use two installation screen. After finding this post this morning, I tried all the solutions but none worked. They have however to point me to the direction of the solution.

  Open a PDF only and go to 'Edit' menu drop-down and select Preferences.

  Put highlight 'documents '.

  Display/a mode, change the drop down list for ever.

  That was all it took to solve my problem. I now have three or more PDF documents open and none of them are no longer outside the screen.

  I hope this helps.

  See you soon.

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

• Windows will not open correctly.

  In 50% of the time I start my computer, the system hangs at the screen 'welcome. '  I have to make a sequence ' Ctrl/alt/del"twice before getting the screen with all my shortcuts.  It seemed to occur after I installed the beta version of Microsoft Office 2010, which I uninstalled it since then.

  To perform a system restore, please see the following article:

  http://support.Microsoft.com/default.aspx/KB/936212

  Here are some online virus scanners

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

• Windows does not start correctly when some multiple connection for external hard drive USB hubs are connected

  When starting, I have 2 USB hubs that connect to multiple external HD.

  If I disconnect the hubs, windows always starts very well.

  If I connect the HUB, windows delayed considerably the boot (approximately 5 to 10 minutes) and sometimes restarts the PC before getting to the screen of windows login, and after that the Windows logo is displayed during the start-up phase.

  Some HD sometimes take to start I hear but why Windows is restarted and all simply just do not excluding the HD or hubs does not not as expected?

  Any clue?

  Hello Patrick,.

  If other devices are working well, then clearly the USB ports have gone very well. I would say more that likely you have two defective USB Hub (it happens, I have several other defective in my junk mail boxes!).

  Given that the hubs are relatively expensive, I suggest you replace the two hubs with more heavy duty those able to withstand the high external HARD disk requirements. Try Newegg.com and TigerDirect.com, sort by best rating.

  The other thing, you don't mention if your hubs / ports are ports USB 3.0 and if you use a card like the adapter link. These configurations can sometimes cause problems, and it might be useful to re - check the different connections.

  Keep me posted.

  And thanks a lot for this.

  Kind regards

  BearPup

• window do not expand correctly

  See when I try to zoom in on a part of my image, I want to be able to fill my screen with the image, but photoshop cc creates rather a framework within the frame of the application. I have attached two screenshots that people can see more clearly the question I describe. Any help/suggestions on why this would be fantastic.

  Hi Heather Lee,

  Please follow the steps below to disable the disable use display processor.

  > Open Photoshop.

  > Click on Photoshop > Preferences > Camera Raw

  > Uncheck CPU chart use

  

  > Restart Photoshop and check again.

  Please let me know if that helps.

• When I try to turn on my PC it reads windows not load correctly

  When I try to turn on my PC it reads windows did not load correctly.  Go ahead and load up but it will do several times before of icons appear on the desktop.  When I try to go to the internet and the fact many times.  Sometimes it can show dupping 100 files.  Do I need another computer or if I can do something that will help stop this?

  Original title: hard to load PC

  Hello

  Perform the steps from the link below and see if it helps.

  What to do if Windows does not start correctly

  Hope this information helps.

• Windows does not start. Stuck on the WIndows logo or a black screen United

  Original title: BOOT ERROR

  It's been 6 days since my computer is having this problem.i spin asrock pc.the problem is when I restart my computer it doesn't not load some time the screen appears black and sometimes windows logo appears faintly.and when I restart once more, he sows me windows error message it says windows does not start correctly and give me options to start , they start windows normally, sfafe mode, last known good... etc.when I chose an option and start same happens.but when I turned off my pc and wait a minute and start windows boot normally without a problem.is this because of my startup file or something else?

  No, you can't.

  If you have a true bootable XP with SP1 or SP2 installation CD, you can create a new installation CD with SP3 integrated using a process called "slipstreaming".

  It is a pleasure to the project for a day and there are several methods, you can read on the Internet, such as BleepingComputer:

  http://www.bleepingcomputer.com/tutorials/tutorial154.html

  If you want to use the Recovery Console and is not a real XP bootable installation CD or are not sure what you have, simply create a bootable XP Recovery CD of Console yourself (without XP media required)

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• More effective than a virus - KB930494 MS update ends with true Msg that Windows cannot now work correctly

  More effective than a virus - KB930494 MS update ends with true Msg that Windows cannot now work correctly

  I started to reinstall Windows XP, after he has screwed up and I discovered that all the system snapshot
  I created backups worthless - MS removes automatically after 90 days...

  But when reinstalling Windows XP Pro MCE 2005 I managed to beat or dodge the many problems - like all the
  famous error when update .NET Framework 1.1 Service Pack 1 and many others
  Suddenly I met an error generated by Microsoft of NONRECOVERABLE type!

  While trying to install Windows, I agreed that Windows was full of bugs and security flaws and
  need a large number of fixpacks installed via Windows Update.
  Such a group of patches is called KB930494 and the full name is:

  .NET framework 1.0 Service Pack 3 SYSTEM. WEB. DLL and MSCOREE. DLL Security Update for Windows XP Media Center Edition and Windows XP Tablet PC Edition

  Windows Update gave a brief error msg that this update has failed and I have tried to run this update
  manually when it produces the following error message: (note he's telling the truth when it)
  claims that "Windows may not work correctly")

  ---
  KB930494 Setup error

  Error while updating your system.
  Windows XP has been partially updated and may not work properly.

  Ok
  ---

  So, this update of Microsoft killed my system - it sure that _ 'does not properly"more.
  Lots of things off, lots of BSOD...

  Og - of course I should have used the system restore and created a backup that I should come back...!
  I did well - but this bomb of viral type of Microsoft made sure it was not possible to create
  a valid system by restoring such a backup. Probably because half the file system matches the other.

  The worst part is - even if I try to reinstall Windows again, avoiding this Virus created by MS, how can I be sure that
  This will be the only disguised bomb nothing extraordinary provided by Windows Update as necessary security patches?

  So guys, what is the best utility backup/restore partition there?

  Rgds. E. Ben

  Use Partiton Lofic is a down load for free on the partition, you can also use Easeus Disk Copy. It is a free program with a friendly interface.