Windows installation disabled RAID 10

Similar Questions

• Installation and optimization of Windows 8 with RAID

  Original title: windows installation in dell inspiron 8 5523.

  Hello

  Recently, I bought a dell inspiron with 32 GB ssd and 500 GB of hard drive.

  I try to install fresh windows 8.

  someone please give me step by step of the instructions for installation and optimization with RAID.

  concerning

  Hi Venkatavaradhan,

  1. who is the current operating system installed on the PC?

  2. what exactly happens when you try to install the Windows 8?

  
  Refer to this article on how to install Windows 8.
  How to perform a new installation of Windows
  http://Windows.Microsoft.com/en-CA/Windows-8/clean-install

  To install Windows and optimization with RAID, please post your request in the TechNet forum.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/w8itproinstall/threads

  Hope this information helps. If you have other windows related to queries, we will be happy to help you.

• I've been using Photoshop CS6 Student Edition on 2 laptops; updated Windows 8 to 10 Windows without disabling CS6 and installer says I already have 2 options and that you can not install

  I bought Photoshop CS6 Student Edition through B & H in 2014 for two users, which I used in my 2 laptops and yesterday I have one of my laptops upgraded Windows 8 to 10 Windows without disabling the Photoshop CS6 Student Edition on it. Now, when to start the download of the software again in the same portable computer the installer says, I used 2 options and impossible to install any other software. What should I do to install the software again?

  A Win10 update is SUPPOSED to maintain all existing software without having to reinstall... so exactly how did you install Win10?

  In any case, to have your adjusted number of activations you must communicate directly with Adobe

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• I try to install the software but my screen says that Windows Installer is disabled. How to enable Windows Installer?

  Using Windows XP Edition Media Center and running IE8

  How to re-install Windows Installer:
  http://xphelpandsupport.MVPs.org/how_do_i_reinstall_the_windows_i.htm

  Windows Installer 3.1 Redistributable (v2)
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=889482fc-5f56-4a38-b838-de776fd4138c&displaylang=en

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Windows Installer 5.0 will be available with and require Windows Server 2008 R2 or Windows 7. Versions earlier than Windows Installer 5.0 were delivered with Windows Server 2008, Windows Vista, Windows Server 2003, Windows XP, and Windows 2000.

  Windows Installer redistributable files
  http://msdn.Microsoft.com/en-us/library/aa372856%28V=vs.85%29.aspx

  Update for Windows XP (KB958655-french)
  Install this update to resolve the issue in MSI Installer 4.5
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e0735d57-03cc-42e5-823e-60c9efe74aac & amp; amp; displaylang = in & displaylang = in

  Also:
  Common problems of Windows Installer
  http://support.Microsoft.com/?kbid=555175

  The Windows Installer CleanUp utility (Note: this link has changed the utility he did).
  http://support.Microsoft.com/kb/290301

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How to convert the MBR to GPT to work around Windows Installer error bootcamp

  Hello

  I have a problem as a previous post (8.1 to Windows Installer on iMac with drive fusion, GPT partition error):

  "Hello,

  I have tried to install windows via bootcamp on my iMac and can't seem to fix the "Windows cannot be installed to this disk. The selected disk is the GPT partition style' error.

  I successfully completed all the steps until I'm in Windows Setup and select the partition on which Windows should be installed. I get the error "Windows cannot be installed to this disk. The selected disk is the GPT partition style. "I formatted the partition, but I still get the same error. »

  Trying to get this resolved as soon as POSSIBLE. I have a MacBook Pro 8.2 (early 2011). El Capitan installed. I already disabled SIP. Try to install Windows 10, if possible, or 8.1 if and then to 10. The target volume is disk0s4. I was able to successfully create a Setup disk Windows 10 USB (even on my MBP 2011), thanks -windows-to-create-the-usb-flash-drive-for-mountain-lion-with-updated-boot-camp/ https://mihail.stoynov.com/2013/04/22/force-boot-camp-into-using-an-iso-image-of

  I tried to look around in this forum and elsewhere to solve my problem. I have met help desk 'Loner' of T and hope he can ring for my case. Here is the result of the following commands in a Terminal:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  In addition, I downloaded gDisk but I can't seem to be able to select all the options. Be waiting for instructions.

  Thanks in advance.

  Best,

  Gabriel

  Last login: my Apr 25 14:24:12 on ttys000

  dGabriels-MBP: ~ the gabrielaxel list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Axel HD 937,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft Windows 61.7 GB disk0s4 data base

  / dev/disk1 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 15.6 disk1

  1: DOS_FAT_32 WININSTALL 15.6 GB disk1s1

  Gabriels-MBP: ~ list of cs gabrielaxel$ diskutil

  No logical volume group CoreStorage found

  Gabriels-MBP: ~ gabrielaxel$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1831009760 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  1831419400 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1832688936 120574048 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  262151 1953262984

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  Gabriels-MBP: ~ gabrielaxel$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-1831009760] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1831419400-1269536]

  04:07 1023 254 63-1023 254 63 [1832688936-120574048] HPFS/QNX / TO THE

  Gabriels-MBP: ~ gabrielaxel$

  Hello again,

  Due to the time constraint, I went ahead and had a run of luck the orders gdisk on mine. My Bootcamp partition is disk0s4. I get the following error:

  Complete control of the final. About to write data of TPG. THIS WILL OVERWRITE EXISTING

  PARTITIONS!

  Do you want? (Y/N): Y

  OK; new partition table (GPT) GUID written/dev/disk0.

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Abandonment of writing!

  Is it just b/c that I can't make these changes on the disk I am running off?

• Boot Camp Windows Installation 10 - "Windows cannot be installed to this disk. It's the GPT partition style.

  Hello

  I tried to dual boot Windows 10 alongside OS X El Capitan on my iMac 21.5 inch i5 end 2013. I have followed all the instructions in the Boot Camp assistant, restart, choose the yellow 'Windows' drive to boot from, but when I get to the Windows installation, enter the product key and language, and then select the partition (0-4, the partition Disk Partition) it tells me that "Windows cannot be installed to this disk. The selected disk is the GPT partition style. »

  So I found this answer: How do I install Windows 8.1 on Haswell MBP

  But then I received the same error.

  Tried this: http://macriot.com/mcrt/?p=2362

  But fdisk TPG allow me to change anything, as the SIP is enabled.

  Tried to disable SIP via a command line in a terminal in recovery mode, but got an error-bash: command not found csrutil.

  So now I'm stuck on all fronts. Any ideas?

  Thank you

  RedPanda

  1. your iMac end 2013 supports the facilities of BIOS/MBR and GPT/EFI.

  2. the legacy BIOS/MBR method requires a hybrid MBR.

  3 EFI/GPT is recommended for your specific model.

  4. you can use the GPT Fdisk steps in your link to make your drive a GPT disk only. It is not enough.

  5. you will need to convert the FAT32 partition space using the following OS X Terminal

  diskutil eraseVolume free disk0s4 FREE

  This will return an error, because free space is not associated with disk slices.

  6. at this point, use the USB installer created by the wizard of BC, boot from it and hold down the Alt/Option key and select Boot EFI (not Windows). Point to the portion of the free space that you see after the + 620 MB Recovery HD. It will separate into a small (128 MB) MSR and the rest as MSD (NTFS).

  7. do not install W7 in Boot EFI, because it has some difficulties.

  8. when Windows is installed, and BC drivers are not installed, run setup.exe from the Bootcamp folder.

  9. If csrutil is not found, you are in the recovery of the Internet, because your local Recovery HD is corrupted. The rescue of the failure of the local recovery is restoration of Internet. Your must be on El Capitan. There is no csrutil (or SIP) before El Capitan.

• I have a black and white 2 on windows installation error 7...

  I have a black and white 2 on windows installation error 7...

  things are running smoothly for me until the last part... that says "black and white 2 cannot install. your system has not changed. Re-run the installer to try again. "Error: the filename, directory name or volume label syntax is incorrect"

  guys what should I do... Please help me... I like this game very much

  I tried to disabled my firewall and antivirus to install this game... OO with regard to the compatible thinggy that I n tried yet coz I can't even install the game in my lappy windows7...

  
  

  guys what should I do... pls help >< i="" love="" this="" game="" so="">

  If it isn't your game, then the Compatibility Center W7 says that is not compatibile. But it seems there are other versions that can run.

  Make sure that your installation discs (if his coming to a CD/DVD) are all the scratches/dirt free and clean. A bad scratch or dirty mark on a disc can cause 'odd questions' sometimes.

  There are a few things to try:

  1. find the Setup program you are running for the game and which run in XP compatibility mode.

  2 in case of failure too and then try to run it in XP Compat mode and as administrator.

  I noticed there are a few paths on the www, if you get it installed, it may be an idea to get patches and install them to the best game(check AV before installing).

   

• Cannot install Itunes: ER MSG: cannot access WIndows Installer

  My first installation of Itunes did not. Prob. tried to install the 32-bit version on a 64-bit computer.
  Now, all I get is error 'Can't access Windows install' message when I trey to update, reinstall or uninstall.
  Tried to follow KB support 315346 re-register msiexec for 32 and 64 bit - no idea if it worked but Itunes still generates the error message.

  Hello

  Please use the Windows Vista Forums.

  Start the Windows Installer service

  1. Click Start, type Services.msc and press {ENTER}

  2. double-click on Windows Installer

  3. set the Windows Installer to Manual startup type

  4. Click Start to start the service. Note the error message, if any.

  5. click on OK.

  Make sure that the Windows Installer is not disabled if group policy.

  a. Click Start, type gpedit.msc in the search box and press ENTER to open the Group Policy object editor.

  b. click on Computer Configuration, administrative templates, click Windows components and then click Windows Installer.

  c. double-click Disable Windows Installer on the right side.

  d. make sure that the configured or disabled option is selected.

  If this does not help, check that the location of the Msiexec.exe in the Windows registry file matches the location of the Msiexec.exe file on the hard drive. To do this, follow these steps:

  1. Click Start, type regedit in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. in the left pane, click HKEY_LOCAL_MACHINE, click SYSTEM, click on CurrentControlSet, click Services, and then MSIServer.

  3. in the right pane, double-click ImagePath.

  4. in the dialog box change channels, make sure that the string in the value box contains the correct path of the Msiexec.exe file on the hard drive. This is the way that you saved in step a, a - c. For example, if the Msiexec.exe file is located in the drive: \Windows\System32 hard disk, the correct path of the Msiexec.exe in the zone data file of value is the following path:

  drive: \Windows\System32\Msiexec.exe/v

  Note in this path, drive is the drive where Windows is installed. The "/v" at the end of the path is a parameter required by Windows Installer. Do not delete it.

  5. If the value box does not contain the correct path, type the correct path in the box, and then click OK.

  Note Add "/v" until the end of the path, as shown in the previous step.

  6. close the registry.

  Reregister Windows install.

  a. Click Start, type %windir%\system32\msiexec / unregserver in the search box, then press ENTER.

  b. type %windir%\system32\msiexec/REGSERVER, and then press ENTER.

  WARNING:
  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  If this does not help, run SFC/scannow to replace all system files missing or corrupt.

  This command will launch immediately the System File Checker to scan all protected files and verify their integrity, replace all the files with which it detects a problem.

  1. click on start

  2. click on all programs

  3. click on accessories, then right-click on the command prompt.

  4. Select the Security tab and choose "Run as Administrator"

  5. click on command prompt

  Type SFC/scannow

  The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  Try to install the latest windows installer: http://www.microsoft.com/downloadS/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Please let us know if it helps.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• corrupted Windows Installer

  I tried services.msc, but had no choice to restart what will I do

  I have no idea where engaged Microsoft Support Engineer 'expert' is happening with these ideas and links - they don't make sense to me, but I'm not a committed Microsoft 'expert '.

  Also, you don't have symptoms consistent with a need to run the System File Checker.  When they suggest that interprets it as meaning "I don't know what the problem is or how to fix it.

  You must help us to understand what you mean by:

  corrupt windows installer

  And what it means:

  I tried services.msc, but had no choice to restart what will I do

  If you see an error message, what does exactly and when you see, and as usual we know nothing on your system, as well as conduit to guess.

  Here is a fairly popular example of an error message Windows Installer can be what you see:

  When you try to install a program or by clicking on the button 'Edit' or 'Delete' in Add / Remove programs on an application already installed, you see a message like this:

  Windows Installer may be damaged or your computer is in safe mode

  or maybe this message:

  The Windows Installer Service could not be accessed.
  This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Contact your support team.

  First do the following:

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services applet.

  Look in the Services applet to see if the Windows Installer Service is still listed and you will find that it is probably not (but it should be).

  If the Windows Installer Service is listed, make sure it is not disabled and if it is disabled, change the startup type to manual.  You can't set it to automatic as it will start on its own when he needs start and you don't need it starts every time that you restart your system and execution of all the day when there is nothing to do.

  The Service will start when they need start if she is able to start.  Enough-click OK to save your changes and close the Services applet, reboot your system to make sure the changes 'stick' and see how things look now.

  If the Windows Installer Service is completely absent from the Services, you must add it as follows:

  Click Start, run, and in the box enter these commands one at a time by clicking on the OK button for each:

  msiexec /Unregister (or you can type: msiexec /unreg)
  msiexec/regserver

  Click OK after each command (there is no message about what happened)

  Check in the Services applet again to see if the Windows Installer Service is now listed, and the startup type is set to manual, reboot your system to make sure the changes 'stick' and see how things look now.

• I have a compac using XP. I get "your windows installer is installed correctly" when I try to unimstall a program. That's happened? How can I get the installer working properly?

  I can't get the uninstall program to work properly in 'install/remove '.  I am told "windows install is installed incorrectly or it is in safe mode.  Another problem is that I can not transfer files on a CD.  I don't know if these issues are related.  I don't know enough to find the offending element.  Someone at - it response - I can fix it myself, or something I can download from Microsoft?
  Thank you.

  That is what the message really says or does mean something like these examples:

  When you try to install a program or by clicking on the button 'Edit' or 'Delete' in Add / Remove programs on an application already installed, you see a message like this:

  Windows Installer may be damaged or your computer is in safe mode

  or maybe this message:

  The Windows Installer Service could not be accessed.
  This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Contact your support team.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services applet.

  Look in the Services applet to see if the Windows Installer Service is still listed and you will find that it is probably not listed (but it should be).

  If the Windows Installer Service is listed, make sure it is not disabled and if it is disabled, change the startup type to manual.  You can't set it to automatic as it will start on its own when he needs start and you don't need it starts every time that you restart your system and execution of all the day when there is nothing to do.  The Service will start when they need start if she is able to start.  Enough-click OK to save your changes and close the Services applet, reboot your system to make sure the changes 'stick' and see how things look now.

  If the Windows Installer Service is lack of Services, you must add it as follows:

  Click Start, run, and in the box enter these commands one at a time by clicking on the OK button for each:

  msiexec /Unregister (or you can type: msiexec /unreg)
  msiexec/regserver

  Click OK after each command (there is no message about what happened)

  Check in the Services applet again to see if the Windows Installer Service is now listed, and the startup type is set to manual, reboot your system to make sure the changes 'stick' and see how things look now.

• Windows Installer keeps trying to install an update for Paint Shop Photo Album, which is no longer available. Slow computer at startup.

  Original title: update

  Windows Installer keeps trying to install an update for Paint Shop Photo Album, which is no longer available. How he remove without disabling the windows installer? I installed v4.5 installer that allows enabling or disabling updates. Paint Shop appears but the box is not checked, so the installer must ignore, right?

  Using msconfig, I can find nothing in startup or services that will completely eliminate the problem, Evin with instaler disabled, Setup window will start to blink during boot computer has been scanned and cleaned with Security Essentials, SuperAntiSpy and Spybot. \

  There is a key in registry under HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\ referring to it.

  What is no longer available - Paint Shop Photo Album or the update?

  If you have uninstalled Paint Shop Photo Album, you might see if running free Revo Uninstaller is able to get rid of leftovers that could cause problems.

• Windows Installer has stopped working and access is denied installation KB942288-V3

  original title: Windows XP SP3 installation problem

  My windows installer has stopped working. I tried several 'fixed' found on the net, but nothing is done and would be grateful if someone could guide me through the solution.   Windows XP, SP3.

  In 'Services', 'Windows Installer' has been designated 'disabled '.   I changed this "manual".

  msiexec /unreg works ok.
  msiexec/regserver gives an error: "an event could not invoke any of the Subscriber.

  I have downlaoded and ran KB942288-V3 and got ' Setup error.   Access is denied. "

  I watched the permissions in the registry and seems to have all the permissions are ok, but maybe I'm looking in the wrong place?

  Thanks for any help

  Hello Kaiser,

  I would say that if you update your PC from SP2 to SP3 all your files will remain same.

  Once you do a new Installation or a custom don't store all your network cards and other device drivers.

• "Could access the Windows Installer Service" when you try to install codecs

  The Windows Installer

  When I try to run the codecs of corel, the following alert appears:

  The Windows Installer Service could not be accessed. This can happen if yor are running windows in safe mode, or if the installer of the window is not installed correctly. Contac your support staff, assistance.

  Can someone help me out here. I'm still trying to run a dvd on my WMP movie, but no codec plug-ins introduce yourself. Prior to that, I get another warning:

  Windows medal drive has not been closed properly. A damaged or incompatible plug-in could have caused the problem to occur.

  As a precaution, the plug-ins optional have been disabled.

  Hello

  I suggest you to follow the steps in this article and check if it helps:

  http://support.Microsoft.com/kb/315346

  It will be useful.

• The Windows Installer will not stop flashing on my screen as it tries of are flashing just fast I can't even stop it in the manager__ task

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with widows Explorer programs
  • Setup error messages-windows quick flashing guard on my screen, as if it starts
  • Recent changes to your computer
  • What you have already tried to solve the problem tried to get rid of all the old files of RIM software
  Hello
  1. have you made changes on the computer recently?
  2. do you get pop windows installer when you start the computer?
   
   
  Method 1.
  Re-enter the Setup engine
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
   
  MSIExec /Unregister
   
  MSIExec/regserver
  
  Method 2.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to remove virus in System Volume Information in XP and Windows Installer

  C:\System Volume Information\_restore{B37680B2-BA0A-4E5D-BF30-83E44C588624}\RP1596\A0178723.dll Trojan.Generic.4932440 Deleted

  Objects not scanned: C:\System Volume Information\_restore{B37680B2-BA0A-4E5D-BF30-83E44C588624}\RP1595\A0178683.msi-online (Embedded EXE)-online (ZIP Sfx g) => (NO NAME) Protected by password Not analyzed (file was protected by password) C:\WINDOWS\Installer\4af47.msi-online (Embedded EXE)-online (ZIP Sfx g) => (NO NAME) Protected by password Not analyzed (file was protected by password)

  My Bitdefender Internet Security deleted about 3 Trojan virus and I want to get rid of the files protected by word too.

  Try to scan in safe mode:

  (1) restart your PC and press F8 button repeatly and chose safe mode and run scan.

  Try to disable safe mode system restore and try to remove them.

  If that fails, contact the Bitdefender support for help.