Installation and optimization of Windows 8 with RAID
Original title: windows installation in dell inspiron 8 5523.
Hello
Recently, I bought a dell inspiron with 32 GB ssd and 500 GB of hard drive.
I try to install fresh windows 8.
someone please give me step by step of the instructions for installation and optimization with RAID.
concerning
Hi Venkatavaradhan,
1. who is the current operating system installed on the PC?
2. what exactly happens when you try to install the Windows 8?
Refer to this article on how to install Windows 8.
How to perform a new installation of Windows
http://Windows.Microsoft.com/en-CA/Windows-8/clean-install
To install Windows and optimization with RAID, please post your request in the TechNet forum.
Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/w8itproinstall/threads
Hope this information helps. If you have other windows related to queries, we will be happy to help you.
Tags: Windows
Similar Questions
-
We can install 32 and 64-bit Windows 7 with a license on 2 computers?
I bought windows 7 with 2 bits dvd 32 and 64 with a single product. If the software can be used in two computers, one with 32 bit and... everythink with 64 bitI bought windows 7 with 2 bits dvd 32 and 64 with a single product. If the software can be used in two computers, one with 32 bit and... everythink with 64 bitHello
You can install the 32-bit version or 64-bit on a single computer.
You cannot use both versions at the same time.
Concerning
-
Slipstreaming windows 2003 with Raid drivers
Hi all
I am creating a slipstream disk to install the raid drivers. I did it before using the program n - lite with great success, unfortunately this time it doesn't. So, I checked the forums for how to do it manually. I followed these steps http://support.micro...om/?kbid=288344
This makes me through loading the driver and restarts, then restarted and enter in install windows server 2003 fails with the error message "an error was encountered, which prevents the installation to continue. internal configuration data is corrupted (phase0). Press ok to view the Setup log"
The Setup log shows "installation internal data structures are corrupted (phase0).Any ideas?
Hi Tuono,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/winserversetup/threads
-
HP Jet 11-D007NA: How do I copy and paste in Windows 10 with left and right keys
Hi Everyone, 27/08/15
I know the c control and control functions v for copy and paste with Excel and Word. How do cut you, copy, and move entire folders when you are working in Windows 10? 2 tapping fingers at the same time used to work in point 8.1 of Windows but does not work in Windows 10. I want to move my documents together and download files from my drive c on a memory stick that I have only 32 GB SSD in my book and it is fill up very quickly. I don't want to lose days copy individual files and sticking them in the memory stick. That would be a common mistake. I don't understand why HP had to remove the left and right buttons and make life very difficult for its customers. They probably saved a couple of hundred by getting rid of the buttons in their calculation of costs, but made it impossible for customers to use the laptop in a productive way.
Vijpat10
Have you tried pressing the right and left of the touchpad corners? Most of the models without physical buttons have this function.
-
Windows vista USB flash drive installation AND recover the WINDOWS KEY from the recovery disk
Hi all
I formatted my laptop some time ago. Now I want to reinstall windows vista (came along with my laptop). The thing is due to a problem that my CD drive does not work so I would like to install windows vista by using a USB key. Can you get it someone please let me know if this is possible... If Yes, how I've go ahead make a bootable USB.
As someone can tell me if there is a way to retrieve the WINDOWS KEY from the recovery disc.
Thank you.
Hello
This can help, but you will need a Vista system to create the working bootable USB key:http://www.askvg.com/how-to-create-bootable-usb-drive-to-install-windows-vista/
As for the product key, it should be on a sticker on the laptop (usually on the bottom). If it is not readable, contact the manufacturer for further assistance. As we said already, the product key is not on the installation disc.
Replace broken laptop optical drives is not too difficult, you can see this as another option.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
Question related to installation and activation of Windows 7 on laptop
Hello
I have a laptop DELL E6420 with Windows 7 sticker on it, she a business laptop.
My Department business IT install Genuine Windows 7 on this version for professional use.
After the period of time, the laptop is rented for me.
Can I install a genuine version of Windows on it according to the sticker on it (I understand that this sticker means that an authentic version is sold with the laptop).
If so, how can I get the Activation Code
Concerning
The sticker is likely related to the installation of Windows 7 that was using your company.
You need a new installation code, none of your business.
-
Synchronization and optimization of keithley-Labview with GPIB-USB
I started an old thread on this subject, but I have some new problems. My vi is to control a Keithley sourceMeter to read measurements every 5 ms for 6 to 10 hours, using GPIB-USB. The vi simply sends the commands under a full script to the instrument and then bed measures (voltage and current) in a loop using the visa and saves the data and displays them in a second loop using a queue. I decided to use a queue and a second loop due to the delay caused by reading data, save them in a file + display, all in a single loop! I want to be able to see all the data with real time axis, so I used a xy chart.
Having a shorter time in the upper loop isn't a bad idea. Using the wait until the next ms multiple rather than just the Dequeue wait time can cause the occasional time jumps.
I have no LV open now, so I'll try to remember your VI. I think you picked up 3 data values and a timestamp of each 5 ms. It is 800 items every second. If you want to save all the data but only write to the file every 5 seconds, you will have to accumulate 4000 items. Because file entries are not always made exactly when you ask them because of the behaviour of the OS, you must allocate a bit more wide open spaces. You can initialize an array 2D as 1200 X 4 (1200 lines of 4 columns) of NaN. Place this table into a shift register. Every time you Dequeue data, replace the next line with the data. When you write to produce, use the subset of the array to get the part that was replaced with real data and write the part in the file. Return the initialized array of NaN in the registry to offset and continue to replace the data.
Lynn
-
Hello
What makes them different? In addition, one of these facilities/re-facilities removes everything, and one of them that keeps the files, applications, and settings?
Thank you
Assuming you're on win 10 (you do not specify) there are three things you can do
Refresh > keeps your files and restores system files and folders. (retains most settings)
Reset > you delete files and folders and restores the original operating system (keep anything)
Pure install > remove everything and re - install a Virgin copy of the operating system (keep anything)
-
need to find the password to install final to Michael Dost
When you install the software you is usually requested a password. This is not the Adobe password, or the password of any web site. It is the administrator password for your computer, that you (or someone) has chosen the first time you've turned on your computer. No one can tell you that it is, or to reset.
-
When trying to install a new control software and data package my Hyperion charger I get this error message "there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ".
---------------------
Troubleshoot Windows install
2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer
http://support.Microsoft.com/kb/2438651
Substitute:
Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
1. in the menu 'Start', click on ' execute:.»
2. in the "Open" box, type "msiexec /unreg", and then press ENTER.
3. in the menu 'Start', click 'run '.
4. in the "Open" box, type "msiexec/regserver", and then press ENTER.
Click Start Orb, in the box, type search: Regedit.
Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver
Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
-
Access denied on a "documents and settings" folder in windows 7 with administrator rights
I get access denied on the ' c: \documents and settings "in windows 7 with administrator rights. The icon shows a small lock on the (very cute) folder. Permissions indicate full control to the folder. I can only access the contents of the folder by adding it to the library folder. The computer is fairly recent and is very near of the original factory. Unlike my precious computers I left it mostly original except for the odd new program. I never really noticed when it pops up as I was getting used to format windows 7 and thought that it must be "the new way" to 7 " The disk has been partitioned by Asus, which significantly added to the confusion. Now I think that it why documents and settings would be in the same folder anyway? What is a level administrator uber folder? Any ideas greatly appreciated.
"Documents and Settings" are not a folder - it's a junction Point.
It is there to allow legacy applications using the latest Windows 7 folder structure.
There is nothing in what you can use.
See here for more information about Junction Points:
http://www.Svrops.com/Svrops/articles/jpoints.htm
It would have been clear if you looked at the Related Posts - that's what they are there for...
-
Decided to reinstall Vista business after that my lenovo x 200 could not start. After you have reinstalled, had to restart and now it appears
"Windows is unable to complete the installation. To install Windows on this computer, restart the installation.How should I solve this problem?Hello
1. may I know the exact error you received during initialization failed prior to relocation?
2. do you know the exact reason for the failure of start?
I will be asked to get in touch with the manufacturer of the system on this issue.
Installation and reinstallation of Windows Vista, you can fallow the article below:
http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3
-
How can I install Windows Xp with Windows Vista?
INSTALLATION OF WINDOWS XP WITH WINDOWS VISTA?I HAVE WINDOW VISTA HOME PREMIUM 32-BIT IN MY SYSTEM, BUT SOME OF MY SOFTWARE IMPORTANT DO NOT INSTALL VISTA SO I TRY TO INSTALL WINDOWS XP WITH VISTA BUT IT DOES NOT WORK.
AFTER AWHILE, I SEE THE TYPE OF HARD DRIVE IN MY SYSTEM IT IS AHCI IN THE CASE OF VISTA, WHEN I CHANGE TO THE SECOND IDE TYPE THEN XP IS INSTALLED AND WORKING BUT VISTA IS DEAD AND WHEN I CHANGE TO NEW TYPE OF DISC TO AHCI THEN VISTA THROUGH REPAIR AND BECOME WORK VERY WELL , BUT DESTROYED XP.
BOTH THE WINDOW WORKS ON DIFFERENT DISC TYPE AND WHENEVER THE DISC TYPE CHANGE, IT WILL TAKE VERY LONG TIME TO FIX THE WINDOW.
IT BECOMES IRRITATING.
WHY I CAN'T USE THE WINDOW AT THE SAME TIME?
SO PLEASE GIVE ME THE GUIDE-LINE STEP BY STEP HOW INSTALL WINDOW XP WITH VISTA?Hi AbidAman,
I suggest to check the following items and check.
How to install or upgrade to Windows XP
http://support.Microsoft.com/kb/978307
Installation and reinstallation of Windows Vista
http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista
Install multiple operating systems (multiboot)
http://Windows.Microsoft.com/en-us/Windows-Vista/install-more-than-one-operating-system-multiboot
Set up a dual-boot system
Hope this information helps.
-
Impossible to format windows xp with CD-ROM, floppy disk, flash drive
Hello
my computer toshiba laptop windows xp home edition, version had the virus and cannot install windows xp with the CD or flash drive.
There is no console recovery, nor the NTDLR file.
If I try to install with cable and other computer do it?
Please help me
Thank you
Hard drive test - CD Bootable:
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
Fujitsu utilities: http://www.fujitsu.com/us/services/computing/storage/hdd/support/utilities.html
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFTNever be afraid to ask. This forum has some of the best people in the world to help.
-
I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?
How your question about Windows Update?
The answer to your question is Yes, if you buy Vista Ultimate or business and move to Win7 Ultimate or business.
Specific Win7 forums include http://social.answers.microsoft.com/Forums/en-US/category/windows7 and http://social.technet.microsoft.com/Forums/en/category/w7itpro/
~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft
Maybe you are looking for
-
I recently changed routers from D-Link to a Netgear R6400. I could get my desk, the laptop and the i - Pad to connect to the new network, but not my HP Officejet Pro 8600 more. When I try to change the IP address, which is what I think I do, the sc
-
kpci 3100 series is totally not supported for versions of LabView news?
Hello I read another post (here!) looking for a driver to work for Labview, new versions, but I did not get good results (keithley ask). As you can see KEITHLEY don't forget to update the driver in a short time. Is completely obsolete kpci 3100 serir
-
HI - sorry for the thread title wave and the "pix on the side", but I'm having a problem with my VMWare Virtual Windows Machine on my MacBook Pro with Os X (10.10.2):I use my Virtual Machine to run a Windows "Poker Clock. Essentially this countsdown
-
HelloAnyone got some experience increasing the processor for Server 2003 or windows xp? I have a server terminal server 2003 who got 1 vCPU and I like to wear 2.I adjusted the CPU on server 2008 several times without any problems, but I've heard rumo
-
How can I tell my movie to start at frame 0 for a HTML5 canvas file?
I try to work through the CC Flash class in a book and in the first draft, it will not let me test my movie because it says that easeljs should start at frame 0, not Framework 1. Nothing in the books description mentions how to proceed. How do I fix