Windows Installer message - cannot find the .msi file

Similar Questions

• Windows media player cannot find the wmv file

  Windows media player cannot find the wmv file when it is attached to the email, but can't once downloaded to the desktop

  See if the steps described in this discussion help http://www.pcreview.co.uk/forums/showpost.php?p=7806298&postcount=3 Steve Hebert - MVP Microsoft, Internet Explorer

• Entry in the list of programs won't uninstall, cannot find the .msi file

  I used CCleaner to try to remove the entry, he said "cannot remove the MSI installer. The program is updated to the Apple software.

  Hello

  There may be several causes to this question, which are preventable and, with tools appropriate, even preventable.

  1. are you referring to iTunes?

  2 are you able to uninstall other programs?

  3. What is the full error message do you get?

  I suggest you follow the given steps and later a update on the State of the question.

  Problems installing and uninstalling programs on Windows http://support.microsoft.com/kb/2438651 computers

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• "Se error message" cannot find the < required > file in the < place > during Internet download

  Original title: I'm not able to save my downloads of web due to change in a techniical framework. What should I do?

  the message that I get while opening the download is described as under .pls try n help as soon as possible cos all my work is on hold.

  
  
  
  
  Cannot find the file in the
  
  
  
  
  
  

  Hello

  1. which browser is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps mentioned below, if Internet Explorer is installed on the computer.

  a: Open Internet Explorer.

  b: click on Tools > Internet Options.

  c: Then click on the Security tab.

  d: then click on the custom level button.

  e: Now navigate to the downloads section.

  f: Then select Activate for the download file option.

  g: then click on ok > apply > ok.

  Hope this information helps.

• Windows error message "cannot find the file K:\$MFT or K:\System Volume Information.

  Original title: Windows Error Message.  Cannot locate the file K:\$MFT

  Periodically, I get an error message stating that Windows cannot locate the file K:\$MFT or K:\System Volume Information.   In this case my computer loses contact with K (my backup drive).  The only way I can get the command back up and running is to shut it down, restart windows and then reconnect the drive.  I have absolutely no idea where, why, or what this message is not irritating and a nuisance.  How can I stop this?

  My problem is back and I guess that I does not after all.  It was suggested that more info on my system could help find answers.  I am running Windows XP. SP3.  My HD is 500 GB.  Intel Core 2 CPU.  6600 GHZ, 3 GB of Ram.

  In addition the cannot locate the message file, it sometimes indicates that a "delayed write failed" and I should save the K:\$MFT file also.

  As far as I can tell, I have solved my problem.  Windows 'Restore' was trying to save my disk backup for future use, and I think it's whence came the message.  I changed the settings to restore now ignores my backup disk and the problem has not happened since.  I hope it's the end of it.

• error message "cannot find the image file: $lib/Textures/Fields.png.

  Hi, I work on a PC with windows 7, first cc 2015.4

  Today, I installed red giant universe. Some features did not work and gave me an error that it cannot find al sorts different image files.

  now I try not to use any od red giant plugins and I still get the above message.

  someone has an idea how solve it?

  Contact Red Giant.

• Windows error message "cannot find the Web site.

  Whenever I have access to a Web site, I get this error message: "Windows cannot find (specific Web site).  Make sure you typed the name correctly and try again"

  Firefox crashed and I restarted in safe mode with all disabled add-ons.  I'm adding the Add-ons, but this windows error message persists.  How to prevent the error message since websites load normally anyway?

  Hello

  Try to Reset Internet Explorer and check if it works.

• during startup, I get an error message 'Cannot find the resource file' how to restore this file?

  I had a virus fakespypro.  After it has been deleted I can't access my resource file at startup.  I need to reinstall windows vista to restore it?

  Hello

  This message is probably part of the scythe. Is there more information you can give about this?

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• "Cannot find the dbcodes file": PeopleSoft database Configuration Wizard

  Hello

  I am setting up a new installation of PeopleSoft, based on a copy of the record of my client PS_HOME. I installed before PeopleSoft, but I used the latest versions and started from scratch. Now I use PS HRMS 8.9 and PT 8.48 on a Windows 2003 server. I followed the manual to install 8.48 PT (installation of third party tools, using configuration manager), except for the wizard to install PT, because the files are already there. I changed all config files I had to include suitable locations for PS_HOME, Oracle database drivers, etc.

  Now, I'm trying to use the database Configuration Wizard to automate the creation of the database using Oracle 10.1.0.5.0. After you have selected a non-unicode database, I click Next, select the character set, and then when I click Next again once I get the message "Cannot find the dbcodes file."

  I checked in the folder PS_HOME/setup and there are two dbcodes files: dbcodes.pt and dbcodes.hc. It is originally a kind of confusion, or the wizard missing the dbcodes file somewhere else? Or maybe that's another question altogether, I'm not sure.

  Thanks for the help.

  To start with PS_APP_HOME introduced in PeopleTools 8.52.

  On the road to Peoplesoft: Peopletools 8.52: the PS_APP_HOME variable

  As you run on PeopleTools 8.48, the application is installed in the PS_HOME.

  ptengs. DB is used to create a single database of PeopleTools, you try to create a database of HCM. This file will not be used when creating your database.

  If you want to create your copy of HCM all files from 'PS_APP_HOME' to PS_HOME database and start Data Mover with option to create database.

  Should do the trick.

• Receive error message: the system cannot find the specified file. C:\Windows\System32\ < LANG_NAME > \mstsc.exe.MUI when I try to use remote desktop.

  Remote Desktop error

  I use Vista Home Premium.  I used to be able to use the remote desktop connection application, but all of a sudden, it stopped working.  When I try to run it I get this message:
  _________________
  The system cannot find the specified file.

  C:\Windows\System32\\mstsc.exe.MUI
  _________________

  Does anyone have a solution to this problem?  I do not have this file into C:\Windows\System32\en-US\... but perhaps it was corrupted somehow?

  Please help me.  Thanks in advance.

  Hello

  It seems that there are a few system files that have trouble.  One of them being mstsc.exe, I wish you find spyware or infection by the virus first, before you try the next step.  Please see the sticky thread in the security forum.  MVP offers some good advice how to remove these problems.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  If everything is clean, we will try a repair installation to replace the problem files and also to ensure that other system files are good.

  The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD.

  If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.

  • When the Setup program starts and the install now screen, click install now.
  • Note When you receive the important Get updates for installation message, click go online.
  • Click upgrade when the which type of installation you want? appears

  Please let us know if this solves the problem for you.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Recently I have not been able to burn a CD with Windows Media Player: I get an error message: "Windows Media Player cannot find the file."

  Hello

  I recently haven't been able to burn a CD with Windows Media Player (he worked last week, but not now). I get an error message "Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. "Try to fix the link or delete the item. There is a web help option which says that to fix a link, you click on the blue icon next to the item, then click "Browse this article. But the only icon I see is a little blue triangle next to individual songs in the library pane or list, there is no icon next to the name of the playlist. Although the click with the right button on the blue triangle gives me a few options, "Browse this point" is not one of them. Does anyone have any ideas what is wrong and how can I sort it please!

  Rick

  original title: burning a CD problems

  Hello

  
  (1) what version of Windows Media Player do you use?
  (2) what is the model of your CD burner?
  (3) you have the latest drivers for the CD burner?
  (4) what type of file you are trying to burn?
  (5) you receive error codes?
  (6) what version of the operating system is installed on the computer?
  (7) we get to a particular file?
   
  
  Method 1: You can try to update the drivers of your CD burner visit the manufactures Web site.
   
  Method 2: You can try to remove the CD, and then insert another CD and try to burn another file and check if the problem persists.
  
  Method 3: You can also check out the link below:

  Windows Help and procedures: burn a CD or DVD in Windows Media Player: frequently asked questions

  I hope this information helps!

• Unable to play the song or burning CDs in windows media player 11 error message: "Windows Media Player cannot find the file.

  Original title: the windows media player 11

  I have the media player 11 and my operating system is XP Home Edition, but for some reason, when I try to play a song or burn it to a CD, this is the error message I get.  Can someone help me with this?

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. reason for which each song I ever download from the internet is going to play is no longer...

  Thank you.

  Hi NancyCamper,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Windows Media Player cannot burn CD - R music. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link.

  Can't burn music CD - R. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link.  What is an easy way to find and fix this? I know little about the links and need a simple way to fix... Thank you!

  Hello

  You got the C00D10BA error message when you use Windows Media Player. The following information
  might help you solve the problem.
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5260&ID=C00D10BA&ContextId=89&OriginalID=C00D10BA

  Don't forget to click on the four " + " to see more help.

  Support for Windows Media Player
  http://support.Microsoft.com/ph/7763

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I get the message Windows Media Player: "windows media Player cannot find the file.

  I get the message Windows Media Player: "windows media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. To solve the problem, try to fix the link or delete the library item. "When I try to record several songs. I can play the songs so I don't know what link is broken. The problem started after I tried to play a CD using Nero Essentials. I have since uninstalled Nero from my computer but I still have the error message and can not burn a CD.

  Hello

  Step 1: Change the media files are automatically added to the library when played.

  (a) click the arrow below the Library tab, click More Options, and then click the Player tab.

  (b) to prevent media files on your computer or the Internet to be added to your library when you play, delete media files add to library when played check box.

  Step 2: Also rebuild the database of windows media player.

  Follow the steps in http://support.microsoft.com/kb/925718

  See also http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5260&id=C00D10BA&contextid=89&originalid=C00D10BA

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Window 7 unsuccessful backup, error message "the system cannot find the specific file" error code: 0 x 80070002.

  I tried to back up my desktop using Windows 7 upwards, but he is not successful, he stopped, message error "the system cannot find the specific file" error code: 0 x 80070002.  He said no specific file that causes the problem.

  Also, my Seagate FreeAgent, I back upwards of C: from my old PC that runs under Windows XP, which causes conflicts of the OS?  Enjoy diagnose and advise!

  Hello

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  I suggest you follow the steps in the link below and check off the question:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7:

  http://support.Microsoft.com/kb/979281

  I hope that the information above helps you.