Windows Media Player is notresponding during playback of .flv files
WMP is encountered a problem while playing the file... this gentleman box shows my drive u will now...
Is your flash .flv file extension?
Tags: Windows
Similar Questions
-
Windows Media Player-auido jumps during playback of .wmv or .mp3 file
W7 - 64 bit windows media player audio is de-energized (skips, misses))
WMP 12 on my laptop Toshiba running W7-64 bit will pop the sound up to 1 second, shortly after starting a song using wmv or mp3 playback. I have been troubleshooting unsuccessfully and reinstalled WMP 12 without any result. How can I solve this problem?
You never solved this problem? I have the same laptop model with the same question. I solved it by openining control, disabling all the upgrades then go to properties of speaker and switch from 16-bit to 24-bit.
-
Windows Media Player encountered a problem while playing the file. (MPEG)
Windows Media Player encountered a problem while playing the file. (MPEG)
Don't know why Windows Media Player does not accept your mpeg.
Just a suggestion:
Use a video converter and change your mpeg to wmv format and read it.
If you don't have a video converter, google for a free Converter. No need to buy a.
You can also install VLC media player.
It's free.
He plays almost all kinds of formats.
It is widely used and recommended.If you are interested, here is the link:
-
Media Player
I have just updated to Windows Media Player 11. I have a .avi file that only plays sound with no video. I'll see a message asking me to information center to display information about the file being played. Thank youDownload codecs here: -.
http://www.DivX.com/en/software/DivX-plus/Codec-PackOtherwise, you can download and install VLC: -.
http://www.videolan.org/VLC/download-Windows.html -
8007007E tips
There is also another number which is C00D11B1, but both have to do with the lock of the music in windows media player, the message said:-"Windows media player has encountered a problem reading the file; for help click web help. ""- and that of all, but when ' web help ' click on the show numbers that are 8007007E and C00D11B1 and average music, not Windows media player, y at - it someone with the same problem that has been able to solve? Thank you, let me know, if you don't mind, thank you again.
I suggest re-download you WMP 11 from the following link and install it on top of the current installation:
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1d224714-e238-4E45-8668-5166114010ca
Who help me?
If this isn't the case, please report the file type (extension) of the file you are trying to play. For instructions on how to make Windows Explorer shows the file types, see this link:
http://www.windowsreference.com/Windows-XP/how-to-view-all-file-extensions-in-Windows-XP
-
Original title: Windows Media Player does not
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
I have Windows XP Professional and have tried playing the CD through Windows Media Player. I get the message "Windows Media Player encountered a problem while playing the file. For any additional help click web help. "Then I do. Nothing here helps me. The player shows all my music but puts little red x showing that he can't play. Help! I downloaded version 11 of Windows Media Player, but it is saying the same thing.
Thank you.
Hello
1. don't you also get an error with the message code?
2 have you installed third-party readers part?
3. What is the format of the files you are trying to play?Follow these steps and check if they help.
Step 1:
I would have you readers of third party temporarily Uninstall and check if persists it to the question.
Step 2:
Most likely you need codecs to play these files with Windows Media Player. I suggest looking up codec in the Internet that supports the file format, download and install them.
See also:
Player Windows Media for Windows XP supported Codecs
WARNING OF THIRD PARTY
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.See also:
Windows Media Player Error Message help
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!
Hello
Try resetting the default associations for WMP and IE.
How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
How to associate a file Type of Extension to a program under Vista
http://www.Vistax64.com/tutorials/69758-default-programs.htmlIf necessary:
How Unassociate a Type of Extension file in Vista - and a utility to help
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
Restore the Type Associations by default Vista file extensions
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
How to view and change an Extension of filename on Vista
http://www.Vistax64.com/tutorials/103171-file-name-extension.html====================================
Also follow these steps:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html------------------------------------------------------------
Then, if necessary:
Have you recently installed another player?
Reset your associations for WMP and IE.
How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
How to associate a file Type of Extension to a program under Vista
http://www.Vistax64.com/tutorials/69758-default-programs.html---------------------------------------------
Do this to reregister the Jscript.dll and Vbscript.dll files.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
type or copy and paste-> regsvr32 jscript.dll
Press entertype or copy and paste-> regsvr32 vbscript.dll
Press enterRestart and if all goes well, it will run now.
--------------------------------------------------------------
Have you recently added stores or ANY application from Stardock?
Using 64-bit Vista?
Can you think of recent things you did in WMP which could be the cause? You added another
reader recently or an add-on for WMP?When I try to use Windows Media Player 11, the program does not start, or some UI elements
are empty - a Mr Fixit
http://support.Microsoft.com/kb/925704/en-usMaybe something here
http://msmvps.com/blogs/chrisl/articles/17315.aspx
and here
http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspxCheck here the news of WMP11
http://zachd.com/PSS/PSS.htmlI hope this helps.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Windows 7 - Windows Media Player encountered a problem while playing the file.
WMP worked fine one day and then the other, it will not play any type of file. I just get the error message "Windows Media Player encountered a problem while playing the file." with each trying to play any type of file. It won't play video or audio files, even those she played a few days ago.
Dano_TR: try to use system restore to restore to a point from before the problem started to happen, as I have suggested earlier in this thread.
In addition, if you have any installed codec Pack, try to remove the. Uninstall iTunes and Quicktime could also help.
Tim Baets
http://www.BM-productions.TK -
I get this error when I try to play a file I've downloaded BBC iplayer. What is the solution?
My sound driver and the device is installed and running as I am able to listen to music on my laptop. He used to work until I upgraded to Windows 7. and since I have updated it did not work. Windows Media Player works on other video files
Please try the following steps: -.
1. use Windows Update, or access the sound device manufacturer's Web site to see if an updated driver is available.
2. use Device Manager to check the status of your audio device.
a. click Start, right-click computerand then click Manage.
(b) in the left pane, click Device Manager.
c. in the pane, expand sound, video and game controllersand then look for the name of your audio device.
d. do one of the following:
3. If your audio device is listed, but the icon has a red 'X', the device has been disabled. To activate the device, right-click the icon, and then click Activate.
4. If your audio device is not listed in the right pane, expand other devices. If the Multimedia Audio Controller appears in the list, right-click on the icon and then click Update driver software. Follow the on-screen instructions to find and install the driver software.
5. If you are not able to find and install the correct driver software, go to the Web site of your computer or the manufacturer of your sound device manufacturer for assistance.
6. If you do not have a sound device installed on your computer, install an audio device and then try to play the file again. For more information, go to the Web site your manufacturer of the computer or the manufacturer of your audio device.
7. If you try to play a file on the Internet, try again later. The server may be temporarily unavailable or there could be a network problem.
8. If you try to play an MP3 file that contains compressed ID3 headers, make a copy of the file and then use an ID3 tag non - editing program Microsoft to remove or reset the file's ID3 headers.
The ID3 header is a part of the file that stores the album information of the song (for example, the song name, artist name, album name and kind). This information is sometimes called tag. After you remove the headers ID3, Windows Media Player should be able to play MP3 files.
Please click the link for more information
Windows Media Player C00D11B1 http://windows.microsoft.com/en-US/windows7/C00D11B1
You can also reinstall the latest codec
-
Windows Media Player encountered a problem while reading file he when Pinnacle Studio HD 14 is running
Hello
I have Windows 7 Home Premium. I installed Pinnacle Studio 14 ultimate test. When the Pinnacle program works-
a. when I run a WMV file there is no audio data.
b. when I rang a MPEG 2 file (720 p, 25 frames per second) OR a file m2t, Windows Media Player is not able to read the file and gives the error: "Windows Media Player has encountered a problem when reading what he gives.
c. when I close the program Pinnacle all right and WMP reads all of the above files correctly.
I also recently installed and uninstalled Corel VideoStudio X 3 of the trial. First Adobe Elements 8 trial is also installed on the PC.
I would be grateful yuour help solve the problem.
Thank you
Paresh
Hello Paresh,
The Pinnacle program is third party software that is causing the problem to occur. Pinnacle may be in conflict with your music files playing in Windows Media Player, that's why, I suggest you to contact pinnacle and check with them.
Windows Media Player 12 is probably to use the codecs used by pinnacle, which may be the culprit.
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
I am running Windows 7, 64 bit, home premium on a Dell Studio 1558 with an ATI Mobility Radeon HD4500-5100 graphics card and an Intel Core i3. It has 4 GB of RAM.
When I try to read files MTS using Windows Media Player I get the error message "your computer is low on memory. Quit other programs, and then try again,"even with no other programs running. Windows Media Player will play other types of video files without difficulty.
Any suggestions as to what can be the cause of the problem and how to fix?
TBH I'm not sure.
All I can say is on my desk, I have not loaded a pack of codecs only support of any kind and WMP12 plays my MTS files very well. Supported by this statement in Windows Media Player 12 is also capable of playing AVCHD formats (. ) M2ts et . MTS ). [13]" from - http://en.Wikipedia.org/wiki/Windows_Media_Player and the fact that
in WMP12 - "Media files (all types)" MTS has listed as an acceptable format. My office has an AMD/ATI HD5670, and like I said seems to play.
- Have you tried to run a full anti-recent virus scan? If this isn't the case, update your antivirus program and run a scan full to see if it finds problems.
- Then try a sfc/scannow scan to see if it detects and fixes something.
- Just checked, you have installed WMP12? (it should be, but just a double check).
This type of problem (or similar) has developed before items such as http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Player-and-low-memory-issues/bb4bf226-8bd0-41A5-9eed-9be08e6d3bdb and http://www.TomsHardware.co.UK/answers/ID-1699934/computer-running-low-memory-Windows-Media-Player.html and some people said re-register the DLL of WMP files helped. Personally, I've never needed to test or try this kind cannot confirm.
-
Windows Media Player - no audio during video playback
Windows media player
I am running Windows XP. Windows Media Player opens successfully, I have audio but not video. I tried to reinstall, update etc. Still nothing.
Hi jeffwebs,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
3. you receive an error message during playback of video files?
4. What if the problem occurs with all video files read using Windows media player?
It is likely that the codec is correct / encoder is not installed or is installed but has been corrupted by another program.
A codec is a software to compress or decompress a digital media file, such as a song or a video. Windows Media Player and other programs use codecs to play and create digital media files.
A codec can consist of two components: an encoder and a decoder. The encoder performs the compression function (coding) and the decoder performs the decompression function (decoding). Some codecs include both components and some codecs only one of them.
Follow the steps listed in the section below to download codecs for this problem.
-
Windows Media Player sound only during video playback
Windows Media Player won't PLAY VIDEO (MOVIES); ONLY SOUND CAN BE HEARD.
Can someone please? I go crazy - my windows media player will not play anything except the sound on videos (films are so far the problem). She claims codecs are updated automatically, I'm too scared to download some unknown codec. I tried everything I know to do and I'm not too bad to understand such things. I am now at a loss. What is the problem here? BTW-Windows Vista Home Premium 64-bit, Toshiba laptop. I think that Media Player 11.
Volunteer J ~ THANK YOU very MUCH FOR THE REPLY! I WILL RESPECT ALL THE SOLUTIONS YOU HAVE TO OFFER! From what I can tell, they are my videos (movies) transferred from the cd to the media player. Videos of "sample" provided pre work ok. My films all have the extension .avi at the end, that's why I don't understand why they will play only the sound of the film, not the actual Visual part. . AVI should be accompanied by my windows media player. As I said, I'm pretty decent to deal with such things as a result of working with a lot of "technicians" in recent years; This is why I do not bother anyone here, but I am at a loss for what to do. If it's codecs, I don't want to take the risk to download a bad codec and corrupting my system. Already checked the updates of Media player, there are not available at this time. She has also set to automatically download codecs. Man, it drives me crazy! ConfusedOne70 aka Michelle
=====================================
If you download the following free utility... you can drag.
an AVI file on it and it will tell you the codec it needs.Download GSpot
http://www.free-codecs.com/download/GSpot.htm
(left-click the text: "Download GSpot")
(on the next screen...
left click: 'Download [GSpot 2.70]')You don't have to install it... just unzip and run in left
by clicking on... GSpot.exe...See the following articles:
GSpot Super quick start
http://www.headbands.com/GSpot/v26x/Quick_Start.htmlEvaluation of video files and Codecs with GSpot
http://www.windowsmoviemakers.NET/PapaJohn/68/GSpot.aspxI guess these can be XviD files and you can get the XviD
Codec at the following link:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)XviD Codec
http://www.xvidmovies.com/codec/XviD FAQ
http://www.xvidmovies.com/FAQ/Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Problem with Windows Media Player Audio sync DivX playback in full screen
Hello
I have found lately that when playing videos on Windows Media Player divx mode full screen audio is out of sync. If the video is played in window mode, there is no problem. I had no such problem in the past, but now for about 1 month or so, I have this problem.
I have fitted iq508a to vista 64-bit, with the latest drivers delivered HP installed (using the HP update utility)-does anyone else have this same problem too?
Thanks in advance
Jim
Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO PrinterI can't believe! I solved the problem with this problem of video audio sync during playback in full screen!
While watching the Pineapple Express, I thought WTF I'll take another closer look at this, and while they were smashimg their cell phones so that they could not be found by triangulation, (don't ask - u just I have to watch - stoner movie )...
in any case, I looked under tools options in WMP. I unchecked the option on the performance tab "use video smoothing"-the video as reloaded and bingo! everything in harmony!
BTW, I checked my another PC running Vista 32 bit and the option ' use video smoothing ' also exists and it is checked if this seems to be a problem with WMP works on Vista 64 bit or running desktop Touchsmart of WMP... In case I am much happier now... -
ActiveX: Open a separate window of Windows Media Player 9 and control playback
Hey all,.
I'm trying to open a video in WMP4 automatically in Labview and control. There is an existing ActiveX container, but it remains on the front panel. I can control its playback, but can not pause and resume.
I can also open the video in a window outside of LabView through Labview WMP9, but I was not able to control. Simply run it and then watch until it ends. It is the preferred operation, I need to understand.
LabView version: 8.6
ActiveX application: Windows Media Player 4
OS: Windows XP
My questions are:
(a) how to pause and resume a video file, if you use the ActiveX with LabView container ensures
(b) how could I access an instance outside WMP open through LabView playback controls (because I want to automate reading based on acquired signals)
Note that the ActiveX refnum is WMP4 while the version on XP is WMP9.
Thanks in advance for your help,
Hasan
I had trouble with your application. I don't know if it's
my version of LabVIEW or something else. He will not play for me.I would like to direct you to the following thread:
Windows Media Player ActiveX plays do not image, but the stand alone WMP application. Why?
If all goes well
This will help enough to do what you want. I was not able to get
whether at work, but it seems that it is much discussed on the
forums. Everyone has tried to do the same thing as you?
Maybe you are looking for
-
In my work, I get a spreadsheet model Excel from a supplier using windows machines. Using numbers 3.2.2 on opening the Excel file a warning dialog box appears. One warns against a missing font, and another warns that protection of the leaf"has been
-
How can I use MacBook Pro as an external display?
I have an apple TV with HDMI and I was wondering how I can use my MacBook Pro (2015) as a screen for the apple TV? They would be connected. HDMI
-
HP 15-AF138AU: need LAN drivers
Hello I can't find the Lan drivers for my pc, I'm under it wifi only. Please post me the link to download the lan drivers best fits my pc. Thank you PC
-
Satellite Pro L500 used to cranking up what I type
I have a Satellite Pro L500, and it has never worked properly since I got it.Sometimes it starts up but more that it doesn't start until I got hit around the keyboard. Is there a flaw in the L500? It seems to me that there is a loose connection or jo
-
Error message "another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log" Does anyone have a simple way (for a