Windows not exactly windows

Similar Questions

• In Windows 7, my computer's clock is not exact time

  my computer is not keepin g time corect

  1. Click on the clock.
  2. When the clock window opens, click on the tab "Internet time".
  3. Click on the button 'change settings '.
  4. Now, click on the button "update now".
  5. Wait a few seconds. You get an error?
  6. If not, change the small internal battery from your computer
  7. If so, change the server to this: time - b.nist.gov
  8. Repeat of #4. You get an error? If so, change to a different server, until it tells you that the time has been updated...

• Your excellent tutorial is not exactly what version of GPG to install - complete, clear, or vanilla?

  When I go to the link for GPG (ie - Gpg4win), I gives me several options for download. I can install the full version (30 MB), which comes with Kleopatra and Compendium, the light version that doesn't include Kleopatra and Compendium, or can I just install the vanilla version that contains only Gpg4win with GnuPG component only. So should which version I install for use with Thunderbird? I'm inclined to download the vanilla version and then download Enigma for use with Thunderbird, but I'm not sure.

  I'm sure that version vanilla that suit you. I can't be sure because it's been long that I finally installed it in Windows (which I have with me here), and here on Linux component gpg all comes standard.

  AFAIK, you don't need Kleopatra, and I've not heard of, so presumaby, never used, Compendium.

• My scans say that SuperFetch is not responding. How can I make (not exactly computer literate)

  I did some tests to see why my computer crashes and other minor problems. Some of the results were: "the Crash dump initialization failed" - the driver bootstart or following boot system could not run cchp... SuperFetch service terminated with the following error... taskeng.ere below the normal... DX configuration settings not found... DWM DPI scaling off and finally the drivers... .no errors found

  I have also Windows "Insert the removable" back up needs cd/dvd or USB key to continue.

  I get fine internet, only small problems from time to time.     I'm not an experienced computer person, so the simplest indications the better. Thank you very much!!!

  Hello buddyrhonda,

  Can you give us the path to the file "as"?

  Conime.exe file is a Windows system file. It should be located in C:\Windows\System32.

  If it is in other places, it could be a virus.

  Here are some suggestions on how to optimize Windows 7 for better performance.
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Let us know if that helps.

  Marilyn

• Front Panel does not (exactly 2 even while in flat sequence loop)? LabVIEW BUG?

  Hello world

  I have two while loop with exactly the same code and a user in each loop event structure,

  They both make the same thing which is too run until IMAQ image control (one line) click on a recording.

  I used a flat sequence to manage the order of execution.

  The problem is when I use only one single loop (put another in a diagram to disable) the façade answer perfectly and the program does what it should, but when I activate the two loops stuck in case of timeout...

  I do not understand what is happening that I can't do any activity of façade that would be registered, enclosed is a copy of the VI (you need NIVision run the vi).

  Any idea? Is this a bug or did I do something wrong?

  Thank you very much

  Best regards

  This isn't a bug, but the expected behavior. You cannot sequence structures event like this, they both need to be ready to react. Use a single event structure and a state machine architecture. You have about 4 copies of basically the same code of event management. Try to combine everything in one!

  What happens in your case?

  Answer: The two structures event will begin immediately queues of events, but the second event structure cannot respond to them because it is inaccessible due to data flow. In addition, the second structure of the event is set to "lock the front panel until the end of the event. Given that the event cannot end as explained above, the façade is locked up forever.

• Anchor point does not exactly where I put it, but in the middle of the image

  I create the page muse 'contacts' and insert some text and then point anchor and under a photo. My index page, I link to my anchor point 1. the result is a photo half... I don't know what the problem

  The page is probably too short. The bottom of the page reached the bottom of the browser window, until the anchor is able to reach the top of the window.

• Hi, I do not exactly know what sub-topic to post this question. So I'm posting it here.

  I use Adobe Acrobat X Pro on a Windows 7 32-bit system and I have a problem of display of Adobe Acrobat.

  When I open any file, the screen goes haywire. I don't know how to explain it... but the page breaks, the menu bar disappears, and the title bar is missing. After pressing F9, 2 - 3 times the bar menu and title bar returns, disappearing again. In short, the screen gets all mixed up. I've had this problem for a few months now. I switched to Foxit Reader and display looks very good. But I want to continue to use Adobe Acrobat as it has more features and I have a lot of work to do with Acrobat.

  Help, please.

  Thank you.

  P.S. attached a screenshot of what it looks like.

  

  

  I've updated from Kaspersky. So far, the problem seems to have disappeared. I hope this problem is resolved.

  Thank you much for the help. It bothered me for a long time.

• iPhone battery indicator 6 s is still not exact

  I think that iOS 9.3 update was supposed to fix the problem where the iPhone 6 and 6 s more the battery indicator are not accurate. I'm under 9.3, but still see the same symptoms, or a fall of 3% at the same time, or turn off completely with 10-15% left. I was going to submit a bug report, but wanted to see if it's just a problem with my particular iPhone first.

  Try to calibrate your battery first to see if your phone and not a bug. I use a 6 s and have not (yet) noticed these symptoms, I have found other reproducible problems with the battery percentage and have so far submitted two bug for these reports.

• Automatic failover of server, not exactly by using CSS to load balancing?

  Hello

  I investigated the use of the unique CSS11501 box to meet a specific requirement of customers for what follows.

  A sticky connection to a Winframe Cluster(client side) to a backend via a VIP web servers. The reason for the sticky connection with the main server is that there are additional servers providing services to two servers independent backend web service VIP.

  Most traffic on the client side will come to a limited set of ip addresses (or maybe even one) that represents the many winframe unique sessions i.e.unique browser sessions. I think that this can be achieved by using Cookies. Is this OK and there at - it another way to do this?

  In the background that VIP must use only the web server main, even though he is active/available, but have the ability to switch automatically to a second server, if one breaks down.

  I believe that it is possible to use a script or the HTTP protocol in the service keepalive. My question is what balancing method can be used to achieve this type of active / standby (HSRP) as a feature on the CCS for Services (Servers) attached?

  Thanks in advance,

  Regan

  Regan,

  1 cookie should be used to stickyness if ip addresses is not allowed.

  2 check the functionality of the backend I'm sorry.

  This allows you to configure the normal servers [or one] who will receive all traffic and if they are all declining, the sorry server will be used.

  So in your case, the backup server will be defined as server sorry.

  The command you need is primary sorryserver under the definition of the content rule.

  Kind regards

  Gilles.

• Why is "vertical" border between 2 not exactly vertical images?

  Hello

  I don't understand something.  The border between the two photos is not quite vertical.  Here is an example:

  

  No matter if I type or display of high quality, and it's okay if I'm working on my MBP retina or my (admittedly old) Cinema Display.  Downstairs, the right of the photo on the left is just against the left side of the photo on the right.  But at the time where ever you get to the top of the photos, the left looked in.  Am I missing something obvious?

  Thank you, Malcolm

  Looks like the direct Selection tool has been used at some point and a corner node has been moved, or else an image rotates slightly.

• "All the conditions are met" - not exactly?

  Hello again! I'm experimenting a little, set up a mock up of the slightly more complicated project of Captivate to help some of my practice of co-workers with Captivate. I am under a problem but with one of my examples:

  I put a map of the world and six text entry areas to invite a user to name the continents (except Antarctica). I attributed to each box TE an associated variable where it is placed, that is the entrance area of text on Europe is associated with linked a variable titled 'in Europe. I want the slide does not advance until all mailboxes of YOU are properly labelling of each continent.

  Currently, for each main entry text box, rather than by a single shipment, a peak action occurs which assigns the associative variables with a literal name. For example, for action advanced in North America, marked NA_Check, it has an action to display a caption saying 'okay' and assign the NorthAmerica variable with a literal: "North America".

  An advanced global action runs when a user is trying to push a "Continue" button that checks the State of the variables. The conditional action because its properties 'if' that all the conditions are met with Asia = 'Asia', Africa = 'Africa', etc. of all human beings "AND". I assumed that with all of them being 'AND' they must all be true for this check properly. However, I have separate legends for the success or failure, and for some reason all I have to do is to get two correct and I can go forward as if I was 100% correct.

  I thought that maybe it had to do with the variables being assigned prematurely, so I made an action on enter which assigns each variable with "0" so that the entry in the text box would be the only way to make the correct variables. This doesn't seem to work. Any thoughts? Why only do two of the 6 conditions for success when I list all necessary?

  I'm not sure. Maybe a bug in the code of Captivate?

  I think I might rather assign some values to variables and do some calculations, and proceed only if the result is equal to a specific value.

  But that's just me... Rick

• Size of the cursor mouse does not exactly reflect the size of the brush

  The mouse cursor does not reflect the size of the brush in Photoshop CS5 on an iMac OS 10.5. If I try to draw two lines parallel to the edges touch by aligning the edge of the circle cursor, there is a gap between the lines, no matter how hard I put the brush.

  I use a Wacom Intuous 4 mouse, but the problem persists with the standard of the mouse after I uninstall the Wacom driver, so Wacom people say that it is a problem of photoshop.

  The cursor size is larger than the size of the effect I use the brush, tool history, brush brush clone or healing.

  You have the size of your cursor set to normal the Mac OS?  System Preferences > universal access > mouse

• How to remove duplicate rows (not exactly duplicate)

  Hi I have lines like this in a table emp
  
  ENO ename age
  1 25
  26 2
  3 25
  4 26
  
  I don't have repititve enames... (here in this example: A).
  
  If I find something like that I should keep the first line and delete all other lines.
  
  How can I do this?
  
  as unique empowerment of ename... (except for this)

  Hi Renon,
  There are different ways could remove duplicate rows, but Franks solution seems good.
  With the help of ID you can get good results in the largest data sets. If you want Nwe minutes remain in the database and all others to delete then make use of eno and not rowid.

  DELETE FROM emp y
  WHERE       eno != (SELECT   Min(eno)
                      FROM     emp x
                      WHERE    x.NAME = y.NAME
                      GROUP BY NAME)
  

  HTH
  SS

• My new iPad Pro will not exactly be up

  

  This is how it has been since yesterday, 3 September 2016...

  Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple.

• Not exact anchor in MUSE

  I fixed the width so I can use the scrolling effects.

  I have ankles that are activated when I click on my nav buttons. It scrolls too far. Past where I want it. I don't understand this.

  Can anyone help?

  A few tutorials that can give a glimpse of what could go wrong

  Use of anchors for page designs unique fluid scrolling with Adobe Muse

  Adobe Muse - Smooth Scrolling to anchors using the mouse scroll