Windows on Windows 7 Pro OS firewall degrades in Internet download speed when activated

Similar Questions

• I'm trying to reinstall Premiere Pro CS4 on Windows 7 Pro to a new setup file downloaded.  Layout Error 1612. The installation source for this product is not available

  I get an error of installation: Error 1612. The installation source for this product is not available. Verify that the source exists and that you can access. What is the solution?

  Hello

  This link might help: How do resolve error messages that occur when updating Adobe Acrobat or Reader for Windows

  Kind regards

  Sheena

• Firefox works incredibly slow (as in the window is barely functional, not anything related to connection speed) when I run some games on my computer.

  Hello

  Last month, I got a strange problem with my Firefox browser in certain situations. The question is only apparent when executing some 3D games (most often when I run Diablo III). Each time these games is loaded my Firefox browser works incredibly slow. This isn't a question of a connection problem or such, the loading speed is very good, but the actual clicks, bookmark clicks, entered keyboard etc take a few seconds to register.

  I tried Firefox running in failsafe mode which immediately makes the problem disappears. However, whenever I run it in normal mode the problem will be even if I disable all plugin and simple addon. I also tried to reinstall firefox and my addons and flash player times, the problem remains.

  For what it's worth, another browser, I installed is not the problem at all (despite the same some addons installed - I only have 3 of them).

  Someone has an idea what could be the problem? Is the failsafe mode inactivate the other thing the addons and plugins listed in the addon section?

  Thanks in advance

  Disabling hardware acceleration

• Downgrade from Windows Vista Home Edition to Windows XP Pro Dutch on Satellite P200-15N

  Not knowing where I really should put this... I put it in this part of the forum too :)

  So:

  Hello

  I bought a new laptop with Vista Home and two Partitions... I would like to install on the second partition "Windows XP pro" (with official key & SP2 included)! But when I run the XP Cd I get an error that the HD is not recognized... So I searched on the forum here, to see if there is a possibility of passby he...

  So what I did:
  (1) I download the "Intel storage drivers" of->
  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

  (2) I used the Floppy machine, to create a floppy disk with the necessary drivers (also from the above site)

  (3) I downloaded a copy of freeware "Nlite".

  (4) I also downloaded the additional drivers on the "Toshiba" site itself (Lan, storage,...)

  (5) I did a "Xp Pro P200-15N" card and put all the drivers... Including the Exe I downloaded from the link above named "iata76_cd.exe"...

  (6) I have made a new Win XP bootable CD with "Nlite" & added all the drivers that I downloaded and followed the procedure given by "Nlite". He made a new bootable CD (with all the drivers and .exe and .inf, etc...)

  (7) then I boot my laptop with the CD, but it always gives an error on sata drives... (that it can not be found...)

  So my question is... What I'm doing wrong and what should the other drivers I download to make it work? I have an external USB floppy drive... If additional drivers must be added... So I hope that there is someone can help to Ho...

  I install XP for professional reasons. Things Vista Home can not handle...

  Hope I got a respons soon... CZ, looks really URGENT...

  THX in advance and sorry if there are errors in my writing (I still am of Belgium)

  UPDATE *.
  The method above does not work for me... So took my USB floppy drive and put the drivers on it (hit 'F6' at the start, added the drivers found on the link above, it install it)...
  Then I could also choose a partition...

  So far so good... He asked me if wanted to format it or not... I said ok...
  Then, when he wanted to start the copy, I got:

  Insert the CD-rom or the floppy disk with the name
  Driver Intel Matrix Storage Manager
  In station of A:

  * Press ENTER when you are ready...

  And I do not know what I do... CZ hitting enter doesn't do anything: s

  So what I'm doing wrong, it becomes really ANNOYING and frustrating... I did everything they said in the link, in fact the method with f6, but still now reaction: s... Everyone?

  Sincerely,
  Frédéric

  Thanks for the latest info!

• Problem with the reinstallation of Windows XP Pro

  A few days ago my Windows XP Pro showed an error at startup, which has declared "activation failed". I have been using the computer for several years. I installed my XP disk to recover the system. After several hours (overnight), he continued to show "Please wait".

  I decided to reinstall windows, it showed that I loose all my data, so I copied them to another drive, and then run to install windows in a different directory (C:\Windows2). I also used a newspaper different name in order to keep my files intact.

  Then, I decided to install windows on "C:\windows" with another in log.

  I now have a selection of dual-boot. One for windows and one for windows2 (show 'Windows XP Pro').

  My question is how I can remove the dual boot. I also need to eliminate some of the user data files.

  Then use msconfig to remove the entry from the start for windows2 installation menu and then delete the folder for windows2

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• I am infected with 'Windows Police Pro' & I can't connect to the internet to launch the live scan. The malware has disabled regedit, and any other approach, trying to regain control.

  I searched and downloaded every suggestion of recovery I can find on the internet. Nothing worksIdeas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Run the system restore and see if you can return to a time before the infection occurred.

  Follow the steps in the article of bleepingcomputer.com Remove Windows Police Pro (removal Guide) .  If necessary, download the files on another computer and copy them to your.

• MS Windows XP Pro very slow after installing updates

  I have a computer that is running Windows XP pro. I put it to download updates but the choose me when to install updates. After installing some updates, the computer became so slow - especially during the same thaat start move the cursor of the mouse became a problem. Even the sound of windows when loging in is just sounds bad. This is the second time its happening. the first time that I had to format the hard drive and install windows again & evderything worked well until after the updates. I can't say what update is the cause of the problem, but am sure the problem is with some windows update. Any help will be greatly appreciated because I don't want to format the computer again, because later the question will come again unless I have disable windows update and live with the consequences.

  "Goodan" wrote in message News: fbfe2d05-1824-49da-a18a-0103bbc85001...

  I have a computer that is running Windows XP pro. I put it to download updates but the choose me when to install updates. After installing some updates, the computer became so slow - especially during the same thaat start move the cursor of the mouse became a problem. Even the sound of windows when loging in is just sounds bad. This is the second time its happening. the first time that I had to format the hard drive and install windows again & evderything worked well until after the updates. I can't say what update is the cause of the problem, but am sure the problem is with some windows update. Any help will be greatly appreciated because I don't want to format the computer again, because later the question will come again unless I have disable windows update and live with the consequences.

  Usually, I found that this happens when installing .NET updates - if you give the machine 20 or so minutes to regroup and then restart, the problem disappears usually.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• HP LASERJET SERVICE and CRASH of WINDOWS 7 PRO

  My windows 7 pro 64-bit lock every so often and when I restart and run Windows Reliability Monitor there is always a critical error 'HP Laserjet Service' that stopped working when the accident occurred.

  In msconfig/services, the checkbox is selected and the status is stopped.

  This critical error is still the only listed by the way.

  The P1102W printer and I'm only using wifi.

  Printer still works fine.

  Appreciate any suggestions.

  Hi aelumley , sorry to hear that you still have questions. After the reinstallation of the printer, the icon is now grayed out.

  Have you tried turning on the Laserjet Services in return startup items again to see if that could fix this problem?

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  I would run the difficulty it Microsoft tool to see if it will be useful.

  Diagnose and automatically repair Windows files and records issues.

  Sfc/scannow will inspect all the important Windows files on your computer, including the Windows DLL files. If the System File Checker detects a problem with any of these protected files, it will replace it.

  How to use SFC/scannow to fix Windows system files.

  If you have another computer, install the printer on it to see if you have the same results.

  Please let me know the results.

  Thank you.

• Get a black screen display during the installation of the center of Catlyst ATI in Windows 8 Pro

  HP Pavilion dv6t-3100 CTO Entertainment Notebook PC Serial number (S/N): product number [personal information deleted] (P/N): ww142av of operating system: Microsoft Windows 8 Pro (64-bit)

  Get dipslay black screen when I tried to install the latest ATI Catalyst Center (ATI CCC) in my laptop. After restarting my laptop too, I get the same screen for balck disply.

  When I was in Windows 7 Home Premimum I am able to swicth the ATI to Intel grsphics display option. After upgrding to Windows 8 PRo that I am faced with this display problem. Is this related to the software HP power manager or even in connection with the question of compatibility Windows 8 PRo.

  Please help me to solve this problem as soon as POSSIBLE.

  Click with the right button on amd drivers and click on update driver. After "Browse my computer for driver software" => 'Let Me pick from a list of drivers on my computer'-online 'have disk... '. "and stick to the location of W76A_INF.

  And have you tested uninstall intel hd graphics card before you install amd?

  Well, I really prefer to install drivers leshcatlabs instead, they are more up-to-date drivers.

• Windows 7 pro sp1 - stop only when the key

  Hello

  I have to hold the stop button to shut down my computer in windows 7 Pro sp1 can anyone help.

  also when it goes into sleep or hiberate I can't touch just a button to restore the screen, I have to hold the power button / stop and restart.\\thanks

  The computer shuts down correctly if you use the option on the screen (Start menu > power option)?

  In general, this type of behavior that you see means that you are missing a driver for your computer.  You can fortunately usually just go to the Web site of the manufacturer of your computer, under their support section and find your model number and re - download driver needed.  It will be labeled as a chipset driver or driver ACPI (Advanced Configuration and Power Interface).  This is the driver that allows the computer functions related to power as a 'safe shutdown' when you press the switch for example.

• Windows 7 Pro hangs at startup except if connected to a network

  I recently installed Windows 7 Pro on a laptop HP 6735 b and successuflly active. It works fine until I have stop the laptop, remove the system and restart. It hangs at the windows logo and stays there forever. If I connect the cable network, he goes to the display of connection in a few seconds. However if I do not connect the network cable, it hangs forever. Not much use to me - an operating system on a laptop that works only if it is connected to my network.

  No go... I'm going to re - install from scratch, as I have no time to continue to troubleshoot. If he re-occours, I open a support ticket with Ms.

  THX

  Hello

  I contacted HP and determined that an upgrade of BIOS for HP 6735 b was required to correct this problem. Once the BIO upagrade was install I had no firther problem...

  HPQFlash for HP Notebook System BIOS (68GTT) - Microsoft Windows-Based

  Dave

• Running Windows 7 Pro, 64-bit and all empty and none of them exe icons only opens.

  I am running Windows 7 Pro, 64-bit Service Pack 1 installed and when start I had dozens of white on the bottom bar task icons by saying that no files have been associated to the program.  I hit cancel and cancelled all out.  All the .exe icons (shortcuts) are empty, all the program under all PROGRAMS icons are empty, and nothing does not open.  My documents on the desktop will BE open in word or excel, but not from the shortcut.  The regedit.exe will work not or open.

  Does anyone have a solution?  It happened yesterday, I restored to 10 October and my computer worked, so I turned it off.  This morning when I turned on he did it again.

  Thanks in advance for you help.

  Jim

  You have changed the exe file association.

  Follow the instructions here and getting on for exe. http://www.dougknox.com/XP/file_assoc.htm

  Note: You have posted to a forum that is completely different to your question/problem category. Your question has been moved to a forum category that matches it's better.

• Cannot get wifi after installation of windows 8 pro on Dell Inspiron 3000 11 two in one

  I got a Dell Inspiron 3000 11 two in one.  He had windows 8.1 installed, but I have windows 8 pro and downloaded on my new pc.  However, my computer no longer with my WiFi.  It does not show a wi fi connection more.  My wifi worked until I installed Windows 8 pro and it worked all my other devices when on another laptop, including.  It is said that there is no link at all.  I tried to turn the wireless switch, etc.

  Hi Floyd,

  Thank you for your response.

  I appreciate your time and your efforts.

  You reinstall drivers wireless from the manufacturer's website?

  I appreciate the fact that you have already uninstalled and reinstalled the drivers wireless.

  However, I suggest you put in day wireless drivers and chipset from the following links and check if it helps.

  Network wireless driver
  http://downloads.Dell.com/FOLDER02661735M/2/Network_Driver_GY2WC_WN_6.30.223.215_A03.exe

  Driver Chipset
  http://downloads.Dell.com/FOLDER02267754M/1/3148_Chipset_Driver_P5MX8_WN_9.4.0.1027_A00.exe

  I hope this information helps.

  Thank you

• Clean install of windows 8 pro x 64 on a new ssd upgrade, I have windows xp x 32 on a disk hard available, which I no longer use, can I do this?

  I want to clean install windows 8 pro x 64 on a new ssd upgrade.

  I have windows xp x 32 on an existing hard drive which I no longer use, I can do this, that I can start the upgrade process, and then point the installation on the new SSD?
  I really don't want to install XP on the new SSD and am not bothered about keeping programs or settings

  How to do a clean install:

  Step 1: Use the upgrade wizard to describe the PC and pay the $40 (US)

  Step 2: When the 'Install Windows 8' message appears, select 'Install by creating media' to create a bootable USB key or .iso (a disk image) file.

  Step 3: Wait for the Wizard download Windows 8 Pro installation package and create the bootable media or .iso file. The flash player must be having 3 GB or more of free space available.

  Step 4: Burn the .iso file, if that's the path you have chosen, to a blank DVD.

  Step 5: Use this key USB or DVD to boot the PC.

  Step 6: When you get to the screen in the Setup program that asks, "which type of installation you want?" choose "custom".

  Step 7: Select a drive for the operating system partition in the next screen. At this point, you can create a new partition if there is enough space available or reformat the hard disk.

  Step 8: Proceed with the installation of Windows 8 Pro.

  You should probably do a phone activation after installation is complete.

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.