HP LASERJET SERVICE and CRASH of WINDOWS 7 PRO

Similar Questions

• Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro

  Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro.

  I did Boot Camp with 8,1 this system successfully but the upgrade of Windows 10 dorked BootCamp upward when it is added to the system partition.  Has had a lot of work, but ultimately got all partitions disappeared and I tried Boot Camp and got it.  I erased the disc and then reinstalled El Capitan sweet factory without bringing more parameters.  Now, I still get the same error?

  I tried a few sizes of ~ 50 to 170 G with no luck.  It's on a MBP 2016 15 "with retina, 512G SSD, 16G RAM, GPU display.

  Any suggestions?  Troubleshooting?  I can't yet find/say if this thing creates something useful for a log file or?

  1. you download Windows Support software on a wireless connection? If so, try a connection cable, if possible.

  2. Please look in Applications-> utilities-> Console logs for error messages.

• Reinstall Windows 7 Home and reupgrade to Windows 7 Pro

  I have a Dell laptop, Inspiron, provided with Windows 7 Home installed, but without the installation diskettes. I've also upgraded to Windows 7 Pro. I need a new hard drive. How can I reinstall Windows 7 Home and reupgrade to Windows 7 Pro, without going through the installation of operating system diskettes and without having to purchase another upgrade of Windows 7 Pro or the original operating system?

  Thank you.

  I would recommend that you create your recovery disk that will allow you to reinstall Windows 7 Home Premium:

  Creation Your system with Dell DataSafe Local recovery discs...

  If its damaged, then you will need to request a new set of Dell:

  Request backup discs - welcome to Dell Technical Support

  It allows to reinstall Windows 7 Home Premium, then reactivate again Express upgrade. Make sure you have your Windows 7 Professional key on-site. If you do not, make sure that you pick up before the deletion or the format of the player:

  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• Adobe Reader DC contains errors and crashes with Windows Server R2 2012

  We have recently installed Adobe Reader DC Adobe version on our servers Windows Server R2 2012 and have problems since its launch. Few of the questions that we have seen are as follows:

  1. This version is a little awkward and crashes.
  2. A lot of pop up boxes that appears whenever I open a document.
  3. Whenever I open a document it is a box pop up welcome
  4. It is a little slow to respond between clicks
  5. If I click on options like file. The application hangs and then crashes. (see crash message attachment)

  Any help to solve this problem would be useful.

  Thank you

  
  

  Questions for users confronted with this question:

  1. do you have the preview pane enabled in file Explorer? If so, you can temporarily disable it to see if the problem goes away? On Windows 8, in Explorer, go to the view tab, and if you press the button "Preview Pane", UN-press it. On Windows 7, upwards to the right (to the left of the help icon) there is a button "show preview pane." UN-press it.

  2. ensure that the following directories exist on your machine. If this isn't the case, please create them:

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheAcro

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheRdr

  Replace USERNAME with your username.

  Is - do this 1 or 2 to solve this problem?

• Installing the printer HP Laserjet 4050 Series PCL6 on Windows 8 Pro

  I tried to install HP 4050 LaserJet PCL6 printer on my laptop with Windows 8 pro 32-bit o/s. I have used the USB IEEE 1284 printer cable to connect the printer and the laptop, but not worked. Any help people? Thanks in advance. Sheikh Mustapha.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - printers supported for Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03168175&cc=us&DLC=en&LC=en&product=3794625

  HP - how to get your printer works with Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03494007&cc=us&DLC=en&LC=en

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  HP 4050 PCL6 - download drivers and software
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3271558&TaskID=135&prodTypeId=18964&prodSeriesId=503548&lang=en&cc=us

  HP 4050 PCL6 - support and troubleshooting
  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=503548&lang=en&cc=us

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Windows 8 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8 - How to troubleshoot printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Can I reinstall my OS from Windows 7 OEM and reinstall my Windows 8 Pro update the store?

  Hi people,
  Happy holidays!

  Ask yourself if you can help me with something... I just got my computer to my new Acer's OEM recovery media and wonder; I wanted to reinstall my original Windows 7 OS came with my computer in order to recover the programs that I've accidentally screwed up and lost during my special upgrade Windows 8 Pro I had when the store was to have the $14.99. I want to know if it is possible for me to re - install all the original media to the new drive and then run the Upgrade Advisor, follow it through, reinstall my Windows 8 Pro by using the product key that I bought at the time? Which will work? I don't have a recovery disk for the Pro Windows 8, just my product key which is saved for me. And no, there is not any Windows.old folder to reinstall the programs of the recovery partition. And no, I don't mean to update my Windows 8 Pro. I'm looking for an easy way to do what I'm not a type of technology! I appreciate all help. Thank you!

  Hello

  Yes, you can reinstall Windows 7 using the disc sent by the computer manufacturer. Once Windows 7 is installed, then you can move to Windows 8. Product key Windows 8 will work, and probably you may need to contact the activation of phone to the activation service.

  Thank you.

• Crashes in Windows 8 Pro. !!

  After the upgrade to windows 7 to windows 8 pro. I get a few crashes, not common however. But it worries me. I have analyzed files of dump with the software "that crashed", but does not include a lot. Help, please!

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Sunday, August 4, 2013 16:58:24 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\040913-34468-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A040)
  Bugcheck code: 0x9F (0x3, 0xFFFFFA8006D1EAC0, 0xFFFFF8026D4DF7E0, 0xFFFFFA800AD70590)
  Error: DRIVER_POWER_STATE_FAILURE
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Sunday, August 4, 2013 16:58:24 GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x9F (0x3, 0xFFFFFA8006D1EAC0, 0xFFFFF8026D4DF7E0, 0xFFFFFA800AD70590)
  Error: DRIVER_POWER_STATE_FAILURE
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, March 4, 2013 18:45:59 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\040413-15484-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A040)
  Bugcheck code: 0x9F (0x3, 0xFFFFFA8006C708F0, 0xFFFFF8800325B7E0, 0xFFFFFA800AD379F0)
  Error: DRIVER_POWER_STATE_FAILURE
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  An occasional blue screen error should not have any long-term effect.

  If all goes well a compatible driver Windows 8 will be provided in the future.

  Another thing I might suggest is to update to the latest version of Kaspersky and see if it helps one.

  Or uninstall Kaspersky and go with firewall and antivirus integrated Windows 8 (Windows Defender).

  Temporarily uninstall Internet Download Manager and see if that makes a difference.

  The Kaspersky IDM pilots and were involved in the blue screen crashes in Windows 8.

• Can I activate and save my Windows XP PRO after its end of Support

  The end of Support for Windows Xp PRO is this 2014, can I still activate it if ever I will plan upgrade beyond 2014.

  Yes - MS will continue to offer XP Activation services beyond the end of life.

  They also promised at one point issued a patch to remove the conditions of activation - but don't hold your breath! :)

• I installed a new hard drive and went to Windows 7 Pro. And Ms. Updates do W o r k.

  I installed a new HD and then installed MS Windows 7 Pro... the installation that I chose not to do the updates but elected to do them later time... re booted system and all this time I was connected to the net and I activated the new facility... However when I TRIED to get the TOP dating Ms... It wouldn't connect... I tried the fix but not with a "clean boot"... it's always the same tool will not connect!  So what of next... I need of these very important updates and of course need answers too!

  The error code I got was code 8024A 006 that it is in the MS update panel

  After he rann throughout the night!

  You will find these solutions and many other things that that might be useful to www.canadiantech.info

  About 120 pages.  Most of it is written for non-technical people, but there is a section for computer scientists.

• Upgrade to Windows 10 and return to Windows 7 Pro

  I upgrade my Windows 7 Pro to Windows 10, I went back to Windows 7 Pro. My question is... After months of July 2016, I have to buy a new key of windows if I decide to go back to windows 10 on my windows 7 pc pro? I downloaded an iso file of windows for windows 10. It will not work after the date limit?

  If you upgraded this system completely 10 WIndows and ACTIVE without problem - there is now a Windows 10 license attached to this computer for the life of the machine itself.  This means that (because the machine does not change much - especially the mother card motherboard) If you go back to Windows 7 NOW and you decide at 9 months (which would put you beyond the free upgrade offer) to Windows 10 out there - you should NOT have to pay anything.

• Problem activation and again reinstall Windows 7 Pro help please!

  I don't have an activation link when I right click on computer-properties... I'm trying to enter my activation code. A window appears and says to activate it. Where can I activate my new reinstall of windows 7 pro?

  1 million thanks (you're always this GREAT help)

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• 6.5.5 and upgrade of Windows 8 Pro workstation

  Hello

  is it possible to install Windows 8 Pro Upgrade in a virtual VMWare Workstation 6.5.5 machine? I get the error "Failed to initialize the HAL" what configuration W8 is starting the pc for the first time.

  Best regards, Franz

  No way - the new version that can run Windows 8 is version 8.0. *

  If you really want to run Windows 8 consider using WS 8.0.4 - If non - to 6.5.5 stick - all later versions are slower

• PC will not start and crashes on windows update

  How to remove the SP1 of vista in mode den via a command prompt

  tried the system restore does not work

  Hello

  I suggest that you do the following instead of remove Service Pack 1.

  Step 1:

  Start your computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  Step 2:
   
  If your computer does not crash in safemode, there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: Put your computer in normal mode (step 7).

• Error - EPPkt.sys and c:\windows\system32\drivers\afw.sys not found and fix crashes in Windows XP Pro computer.

  Original title: during repair XP Pro from the disk installation, everything crashes.

  I am writing this plea on my desktop, pc Win 7 it. The pc is older and elsewhere in the House.

  Due to the white/white space in Add/Remove Programs, after checking the extent of possible for viruses, corruption Reg, etc., the advice of consensus was to reinstall the Windows, using the disc (this XP Pro was on the HARD drive when I got the pc - new to 2009 - and I did the back-up recommended/controlled , and that's what I was doing Rcounter Set up, around 1700 BST.

  Everything seemed to go OK, but black screen of Windows is now the small hourglass circulating and 'Please wait '.  The HARD drive is flickering, but it's been more than 3 hours!

  My second pc was rotten, and I had to reinstall or repair XP Home [disk] a few times. It is only 35 GB, compared to more than 100 on the pc in question - but I've never met before delay.

  Installation messages were as follows:

  EPPkt.sys and c:\windows\system32\drivers\afw.sys not found.  I checked this point, and it should not have caused any problems. It has also sought a labeled disc 'Machine Virtual Network Services', which no doubt, since I did not, was never necessary.

  I'll leave it on - but...

  Help, please!

  Well, I had to bow to the inevitable. Please accept this response as a ' I've been there - it could happen to you. "

  I spoke to BT [they provide my broadband] and the helpful guy asked me to look at the installation and reinstall in a different place. It's OK, but [, BUT] some of the drivers have been zapped in eternity. PCI, sounds, videos. The guy thought BT that these had been modified or replaced since the beginning, whereas they were not available. The XP Prof is on the pc when I got it, but I assumed that the pilots were on the backup disk, I did. No, they were not. And how to go online to search for them if we could not put in place the ethernet connection?
  So, I bought Win - 7 it 32-bit full ed. [be too afraid to try an upgrade].

  It could have been a response in the migration of these from other drivers, but I guess it was time to go.

  As I can't afford to buy new COREL, MS Word, etc, I have installed free VMWare player as a host for my older progs in a virtual environment.

  Another thing came out of this: although what remained of XP has been saved by 7 as WINDOWS.old, I am very happy that I had a HDD eternal with ntfs to preserve my files and installable 3rd party progs.

  I hope this might help someone - thanks for the info.

• UPDATED HP freeses and crashes under Windows 7 64-bit

  Hello! I am now running Windows 7 Home premium 64 bit on my m9152p HP Pavilion Elite originally shipped with Windows Vista 64 bit... I upgraded in early spring of this year and everything has been fine until about 2 weeks ago... Each time HP Update tries to run... It hangs... This started to happen out of the blue... It ran fine up until about 2 weeks ago, when she started this behavior... I haven't had any setting or program changes that I know... He just started crashing all of a sudden... I have uninstalled and reinstalled the latest version of update HP... nothing helps... Can someone help me? Thank you!

  HI: You are not alone. I had this happen on my W7 PC 2. Works well until a week or two ago. Now when you launch the program you get just the message that the program has stopped responding. I don't have a fix. I also tried the program updated without success. I've uninstalled it. You can run the Windows update program which will take care of most of any driver and other updates for your PC. If all goes well, people have reported this problem to HP that will be able to fix it. I wonder if it has to do with the upgrades of windows security or other updates that we received last month.