Windows printer spooler

Similar Questions

• Error: Windows print spooler is not running when you try to add the HP printer wireless

  I'm trying to start the Windows printer spooler and do not know how.  Can anyone help?

  Thank you

  Original title: I TRY to ADD a PRINTER of HP WIRELES in MY PORTABLE AND I GET AN ERROR MESSAGE THAT SAYS THAT my WINDOWS PRINT SPOOLER NOTR IS RUNNIN'.  How can I START THE SPOOLER?

  Hi Samsodano,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can run the Microsoft Fixit to the below mentioned link and check if it works.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

   

  Method 2: You can consult the following Microsoft article Knowledge Base and follow the steps in the article to resolve the problem.

   

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP

  http://support.Microsoft.com/kb/324757

  Let us know if it helps.

• "windows print spooler service" is missing

  printer cannot be installed: 'Windows print spooler' missing? Help, improvements and corrections are not doing the work.

  Take a look on...

  http://support.Microsoft.com/kb/324757

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Windows print spooler service:

  I need a fix for a problem in Windows XP - error 1722 Print - Spooler Service please help.

  I am trying to install a HP OfficeJet 6500 printer/fax to my computer a.  The print spooler driver does not work.

  How can I solve this problem?  Please help me.

  I tried for hours to try the fixes listed on Windows and HP websites without success.

  Select Start, Control Panel, Folder Options, view, advanced settings and check the box in front of "show files and folders" and 'Hide protected operating system files' are unchecked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.

  You must watch rather than searching for them.

  There is also a System 32 folder located in the folder "I386" on your Windows CD. This System 32 folder contains the compressed form of your Windows XP boot files. If you need to replace a system file 32 on the hard drive of your computer, you can extract the necessary files to the folder I386 on the Windows operating system CD.

  Source:http://www.ehow.com/about_6621878_system-32-windows-xp_.html

  To replace a damaged or missing file, normal is to run the System File Checker. This can become complicated when the operating system is SP3 and the CD is SP2 or an earlier version. What is the situation on your computer?

  Select, start, run, type sfc/scannow and press ENTER

  http://support.Microsoft.com/kb/310747

  Copy the i386 folder can help

  http://www.updatexp.com/scannow-SFC.html

  Hope this helps, Gerry Cornell

• Windows print spooler service does not.

  Vista Home Premium (SP2).

  "Crushed" PC when uninstalling a printer.  When you try to install the new printer I get error message saying "cannot start windows spooler service.

  Is there a way to fix the problem?

  I tried to restore the system to an earlier date - did not help.

  Thanks for the help.

  I tried your suggestions but it did not work.

  I contacted Dell last night and they were able to solve the problem.  It took the neirly Advisor 3 hours to solve the problem.  It was something about a registry error.

  Thabjs for your answer to my question.

• "Printer cannot be installed because the Windows Print Spooler Service is not running"

  For my new Dell V313w printer installation CD will not run.  I have a laptop Dell Inspiron E1705 with XP SP 3.  I have disabled the firewall temporarialy.  I use AVG 9 free antivirus.  By the fast installation in place, I have not attached the printer to my laptop or plugged.

  Lexmark printer drivers change structure dependence, so if you uninstall one, you have to fix things.

  Read this page and take particular note of the paragraph that begins,'If you have a Lexmark printer, these additional steps may be necessary... ". "

  I suspect that after you do all the steps, including the dependence of the spooler setting, you should be able to go to the control panel > add or remove programs and uninstall all remaining Lexmark software.

  Once you do all this, restart the computer before you try to install your new printer.

• problem with the Windows Vista print spooler service, hp

  Ive just bought a printer hp deskjet 2050 all in one series printer j510, instillation goes very well until you connect the usb to the pc printer, then the next bit says sorry cannot locate the driver, so I try to download the driver from the Web site after that try again it says "the following questions have been detected. windows print spooler service. I have no idea how to get around this and annoyed the need the printer last night when I bought:(toute aide serait appréciée, nous avons essayé de passer sur le matériel et aucune imprimante n'apparaît, si nous allons ajouter une imprimante à travers cela ne fonctionne pas:()

  Hello

  1. you receive an error message?

  2. were you able to install the printer successfully on your computer?

  3. when exactly you receive the Windows print spooler service message?

  4. have you made changes on the computer before this problem?

  You can check out the following link and check.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• How can I get my printer spooler running I get error 1075 when I try to start it

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you see something like this:

  Cannot start service on Local computer print spooler.
  Error 1075: The dependency service does not exist or has been marked for deletion.

  Error 1075 means "ERROR_SERVICE_DEPENDENCY_DELETED".

  This means that there is some Service think that it depends on to start the Print Spooler Service that is missing.  It's maybe the printing or drivers that have been uninstalled software.

  If really, the dependency service exists and simply not work (dependence, Services must be started and running), you will get an error like this:

  Cannot start service on Local computer print spooler.
  Error 1068: The dependency service or group could start.

  You now or you already had all of the installed Lexmark printers?

  If the Service print spooler used to work well, do you have added or removed all printers since he worked?

  To view your Services, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Highlight the Print Spooler Service, right-click and choose properties you can see what is happening.  You will be especially interested in the startup (generally set to automatic) type and the items listed in the Dependencies tab.

  Always print spooler Service usually depends on the remote procedure call (RPC) Service is running, so if the remote procedure call (RPC) Service is not running, find it in your Services, launch it and set the startup type to automatic.

  If the remote procedure call (RPC) Service is not listed as a dependency for the Print Spooler Service, you can add it.

  You must see what Services depends on your Print Spooler Service, and then restart them (and their startup type automatic value), or if you have the dependency Services listed for items that are more installed on your system, you must inform the print spooler that she needs more of them to start.  Registered Addiction Services that are no longer needed must be removed.

  For example, I said to my Print Spooler Service depends on the remote procedure call (RPC) Service, and also depends on the Service Jose (and of course there is no Jose service).

  When I try to start my Print Spooler Service, I get an error 1075.  It's logical.

  If I look at the Print Spooler Service properties Dependencies tab in the applet Services however, it does not list the Jose Service as a dependency, but if I query the Print Spooler Service broken from a command prompt, I can see what ir really depends on to start and it looks like this:

  [SC] GetServiceConfig SUCCESS

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STARTUP TYPE: 2 AUTO_START
  ERROR_CONTROL: 1 NORMAL
  BINARY_PATH_NAME: C:\WINDOWS\system32\spoolsv.exe
  LOAD_ORDER_GROUP: SpoolerGroup
  TAG                               : 0
  Display_name: Print spooler
  DEPENDENCIES: rpcss
  Jose
  SERVICE_START_NAME: LocalSystem
         
  I need to delete the Service jose as a dependency for the Print Spooler Service (and leave just the rpcss Service), then the Print Spooler Service will start.

  If you don't see the problem in the Print Spooler service dependencies tab, see what are actually of a command prompt window Print Spooler Service dependencies.  To do this, click on start run and in the type box:

  cmd

  Click OK to open a command prompt window.

  In the command prompt window, query the spooler to print (spooler) Service by entering the following command:

  sc qc spooler

  Whatever it is listed under needs of DEPENDENCIES is running before starting the print spooler.

  If there are DEPENDENCIES listed for things that are more installed, you can fix it, but first of all, we need to know what is indicated, then we can remove the ones that are not needed.

  If you make adjustments, do not forget to restart your system and make sure that changes "stick".

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• The event - the print spooler log error could not load a plug-in module

  Using a HP Officejet 6500 a Plus e-All-in-One - E710n p6 - 2036c HP with Windows 7 sp1 64 bit operating system desktop.  I get the following error:

  Log name: Microsoft-Windows-PrintService/Admin

  Source: Microsoft-Windows-PrintService

  Date: 27/09/2012-17:24:41

  Event ID: 808

  Task category: initialization

  Level: error

  Key words: print spooler

  User: PC-1\mpw

  Computer: PC - 1

  Description:

  The print spooler could not load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI. DLL, error 0xc1 code. See the user context information for event data.

  The event XML:

  http://schemas.Microsoft.com/win/2004/08/events/event">

  808

  0

  2

  36

  12

  0 x 8000000000020000

  43

  Microsoft-Windows-PrintService/Admin

  PC-1

  http://schemas.Microsoft.com/win/2004/08/events"xmlns ="http://manifests.microsoft.com/win/2005/08/windows/printing/spooler/core/events">."

  C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI. DLL

  0xC1

  112

  I have no problem with printing from the desktop wired or wireless laptop. But every time I print something this error appears in the Print Service event log.

  I found that the event ID 315 with error 2114 is a synchronization problem.  When I turn on the printer to the computer before, I get this error in the event log.  If I start first to the computer, and then turn on the printer, the error disappears.

• Photosmart HP 7520; How to start the print spooler inorder to connect the printer to the PC?

  Tried to update and received the error 1722: Windows Print Spooler Service has not started.  Checked the spooler that is set as automatic.  Cannot find drivers that update the WIFi connection so that I can print from Windows 7.  Am not able to print from the PC that is connected via WIFi.  Checked and the printer is connected via WiFi.  There are several automatic updates on my machine _ y at - it a mismatch to the printer, a HP Photosmart 7520 recently bought.  When the printer was originally installed, the print command worked until recently!  When I reinstall the printer software, I can't connect it to the Pc via a router.  I unplugged and rstarted the router and I tried to install a new printer.  This has not solved the problem that the 1722 error message reappears.

  Hi Howard,.

  I see that you get the 1722 error when trying to print. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. don't you make changes to the computer before the show?

  I suggest you try to run the printer Troubleshooter and check.
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Also take a look at these articles that might help you.

  Install a printer: http://windows.microsoft.com/is-IS/windows7/Install-a-printer

  Printing to the correct printer: http://windows.microsoft.com/en-US/windows7/Printing-to-the-correct-printer

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Print a test page: http://windows.microsoft.com/en-US/windows7/Print-a-test-page

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• The Print Spooler Service is not running. Operating system is Windows XP Service Pack 3.

  I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

  System in automatic mode but State of the said service stopped.

  I get error 1075: the dependency service does not exist or has been marked for deletion.

  Printer worked this AM, but stopped working between two print jobs.

  I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

  Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

  Thanks for your help

  Robear:

  I'll be back of the travel.  I'm after the suggestion of CARI.  Seems to be the right track.

  My print spooler system component is missing from the remote procedure call.  If I restore it, I think that the print spooler is reactive.  Suggestions of curry hit Start, Program Files, accessories and they type net start spooler.  However, after the departure, I don't see any Program Files, so am unable to complete the suggested path.

• Print spooler problems and cannot install printer driver after Windows 7 upgrade (80070706)

  I just upgraded from Vista to Win 7 Ultimate.  Once installation is complete, I tried to update the drivers and install the latest updates.  Everything worked except for HP LaserJet 4 L driver.  As a first step, whenever the driver tried to install it, the print spooler service may stop working, and the driver installation failed with error code 800F0246.  I then removed everything from the spool directory, rebooted and tried again.  This time, the print spooler service has not prevented from working, but the driver still does not work with error code 80070706.

  I can't find the information for this error (80070706) anywhere on the web.  Any help would be appreciated.

  More information: the HP LaserJet 4 L printer is connected via a parallel to a prolific USB docking cable.  Windows recognizes the printer as the IEEE-1284 device, but says it needs driver to work.

  Update: I was able to manually add the 4L driver using the print server properties dialog box, BUT if I try to add a printer after that, I get "the print processor does not exist.  If I try to add a printer without installing the driver, I get ERROR 0 x 00000002.

  Everything is running as an administrator.  It worked perfectly under Vista.

  Thanks for these links, but these proposals did not help nor solve the problems.

  After a long and painful journey through the registry, I determined that this workstation was already installed 3rd party software, called "Pharos".  Apparently, this software was redirecting the default print processors and was clearly not compatible with Windows 7, although the installation of Win 7 never mentioned a problem of compatibility.  Once this software has been removed, and all the remains erased from the registry, there is now no problems with printers or print spooler.

  In the future, it would be useful that Microsoft has actually provided certain types of useful information when these accidents occur.  Cryptic error numbers and unnecessary event log entries did not provide useful clues.

• Windows 2003 terminal server print spooler service stops frequently

  Windows 2003 terminal server print spooler service stops frequently

  Hello Vijay Bedre,

  Thanks for your post.  Please ask your question in the forum of Remote Desktop Services TechNet as they manage all the server related issues.

  See you soon

• I have error #1053 windows could not start the printer spooler. Help

  Windows could not start the printer spooler. I received the error #1053.
  whatever it is sent to the printer never finished loading and crashes to the top
  my computer, so I have to re - start.

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Ask your questions to http://answers.microsoft.com/en-us/windows/forum/hardware, making sure that you specify your Windows version in the drop-down lists at the top.

• Print spooler dies when I try to print something in Windows 7 using a HP Photosmart 8450.

  I've recently updated to Windows Vista Home Preium to Preium to the Windows 7 home page. It was to install an upgrade not a clean place. When I add y printer (HP Photosmart 8450), it adds very well. However, when I try to print something dies the print spooler. I can go in the window services and throw up, but when I print something, it dies again. I hae contacted the HP Support and they said it was a problem with Windows 7.

  Windows Update has nothing to do with the upgrade of Windows. Transfer your question here rather: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft