Windows print spooler service:

Similar Questions

• "windows print spooler service" is missing

  printer cannot be installed: 'Windows print spooler' missing? Help, improvements and corrections are not doing the work.

  Take a look on...

  http://support.Microsoft.com/kb/324757

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Windows print spooler service does not.

  Vista Home Premium (SP2).

  "Crushed" PC when uninstalling a printer.  When you try to install the new printer I get error message saying "cannot start windows spooler service.

  Is there a way to fix the problem?

  I tried to restore the system to an earlier date - did not help.

  Thanks for the help.

  I tried your suggestions but it did not work.

  I contacted Dell last night and they were able to solve the problem.  It took the neirly Advisor 3 hours to solve the problem.  It was something about a registry error.

  Thabjs for your answer to my question.

• "Printer cannot be installed because the Windows Print Spooler Service is not running"

  For my new Dell V313w printer installation CD will not run.  I have a laptop Dell Inspiron E1705 with XP SP 3.  I have disabled the firewall temporarialy.  I use AVG 9 free antivirus.  By the fast installation in place, I have not attached the printer to my laptop or plugged.

  Lexmark printer drivers change structure dependence, so if you uninstall one, you have to fix things.

  Read this page and take particular note of the paragraph that begins,'If you have a Lexmark printer, these additional steps may be necessary... ". "

  I suspect that after you do all the steps, including the dependence of the spooler setting, you should be able to go to the control panel > add or remove programs and uninstall all remaining Lexmark software.

  Once you do all this, restart the computer before you try to install your new printer.

• problem with the Windows Vista print spooler service, hp

  Ive just bought a printer hp deskjet 2050 all in one series printer j510, instillation goes very well until you connect the usb to the pc printer, then the next bit says sorry cannot locate the driver, so I try to download the driver from the Web site after that try again it says "the following questions have been detected. windows print spooler service. I have no idea how to get around this and annoyed the need the printer last night when I bought:(toute aide serait appréciée, nous avons essayé de passer sur le matériel et aucune imprimante n'apparaît, si nous allons ajouter une imprimante à travers cela ne fonctionne pas:()

  Hello

  1. you receive an error message?

  2. were you able to install the printer successfully on your computer?

  3. when exactly you receive the Windows print spooler service message?

  4. have you made changes on the computer before this problem?

  You can check out the following link and check.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• The Print Spooler Service is not running. Operating system is Windows XP Service Pack 3.

  I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

  System in automatic mode but State of the said service stopped.

  I get error 1075: the dependency service does not exist or has been marked for deletion.

  Printer worked this AM, but stopped working between two print jobs.

  I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

  Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

  Thanks for your help

  Robear:

  I'll be back of the travel.  I'm after the suggestion of CARI.  Seems to be the right track.

  My print spooler system component is missing from the remote procedure call.  If I restore it, I think that the print spooler is reactive.  Suggestions of curry hit Start, Program Files, accessories and they type net start spooler.  However, after the departure, I don't see any Program Files, so am unable to complete the suggested path.

• Windows 2003 terminal server print spooler service stops frequently

  Windows 2003 terminal server print spooler service stops frequently

  Hello Vijay Bedre,

  Thanks for your post.  Please ask your question in the forum of Remote Desktop Services TechNet as they manage all the server related issues.

  See you soon

• local print spooler service error 0x000006ba is not running windows 7

  All of a sudden I cannot print anything and I get this error message.  Using Windows 7 Home premium 64-bit.  Have you tried restarting the spooler, but he continues to go again.  Had really hoped that this bug should be gone after the transition from vista to 7, but I do not.

  Hello

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ------------------------------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the one who made the printer and get the latest drivers - download - REGISTER - install yet. When
  ready to install - make a right-click on the pilot - run as administrator.

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
  http://wiki.blackviper.com/wiki/Print_Spooler

  BlackViper Windows 7 Service - default settings
  http://www.blackviper.com/Windows_7/servicecfg.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Printer Spooler service removed from Windows Vista Home Edition

  I have Windows Vista Home Edition and I don't know when, but in some sort my printer spooler service has been removed, whenever I try to install my printer it gives an error message that there is no printer spooler service, please help I did not one backup drive that I have to buy windows vista home edition to return to my printer spooler service?

  Hello

  1. What is the error message or an exact error code?

  2. what security software do you use?

  3. have you made any change before this problem?

  4. What is the serial number and model of the printer?

  5. you have all other printers installed on your computer?

  6. How do you install the printer?

  7. do you have a software CD to install the printer?

  8. in the printer works well before?

  Try the following and see if that helps you.

  Method 1:

  Use the services console to check the status of the print spooler service and make sure that it is started and set to automatic

  Try this link to check the status of the print spooler service:

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

  Method 2:

  Disable the security software and check if that helps you.

  Disable Vista security software:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 3:

  Try to add a printer and check if that helps you.

  Add or remove printers in Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Method 4:

  Try this link to solve printer problems in Windows:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope that helps!

• Windows cannot add printer print spooler service is not running. Even after the spooler service is started I get code error 0x000006be

  I have XPS from Dell with Windows Vista Home premium 32-bit. I'm trying to connect the office jet J4680 HP wireless printer. The printer was working with this PC, but for the last 2 weeks, something has changed and I can't reconnect to the printer. I get the error Printer Spooler service is not running. After I have start the spooler service and try to add a printer, I get an error 0x000006be code

  Hello

  The main problem is caused by corrupted printer drivers, you will need to check with your printer manufacturer for
  Download the latest drivers (just re - install the old ones will probably lead to this error). Make sure that you
  Download for your version of Windows and 32 bit or 65.

  Error message when you try to connect to a print queue in Windows Vista or in Windows Server 2008: "Windows cannot connect to the printer. Impossible operation completed (error 0x000006be)»
  http://support.Microsoft.com/kb/946394

  ==========================================

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest version of the driver).

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx
  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  ------------------------------------------------------------

  Check this thread - stop and disable the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  If no joy:

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Try runnng Chkdsk of Recovery Options
  (it of a more efficient way to manage to restart the computer and might work)

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows must now restart because the print spooler service terminated unexpectedly

  I have a PC running on Windows Vista professional that I had for about a year with two printers that have also been all this time, a HP LaserJet 1000 and an Epson SX105.

  This morning, amid a series of PDFs (separate files) printing on LaserJet printers, I suddenly had the following pop-up message:

  "Spooler SubSystem App stopped working and was closed".

  On the Control Panel, I found that my two printers have apparently disappeared.  My first reaction was just close and restart the computer, often kind of seeds.

  To restart, I tried to print again, but I was told that I had to install a printer.  Trying to install a printer, I learned that I could not because of a problem with the spooler.  I looked online to find a solution and one that suits (without touching the registry) seemed to be to check the operation of via Control Panel's print spooler, and then restart.  Oh dear.  What a mistake!  I did this and found that the printers have reappeared, but then about 30 seconds later, I got the following pop-up message:

  "Windows must now restart because the print spooler service terminated unexpectedly.

  Each time it restarts the message comes back after less than a minute and restarts on another 30 seconds later, so I have a chance to try a system restore (I installed the last service pack Vista a couple of days), or something else... it's just in a loop of perpetual reboot, I can't stop restarting Windows.

  How the hell do I?  (I send this message using my Vista laptop and pray the same problem occur here, too, so I don't have to print anything).

  Hello

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check the Mr Fixit here and if you use the other methods go back and try again later.

  Problems printing and printing errors
  http://support.Microsoft.com/GP/printing_problems

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  ------------------------------------------------------
  Clean the General corruption and replace all the lost files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Are not in the print spooler service and must not be restarted in Windows Vista

  I can't add an impression because I get an error message "unable to open the Add Printer window. The local print spooler does not work. Please restart the spooler or restart the machine. »

  I ran the "fix it" program, but it does not solve the problem.

  Restarting the computer does not solve the problem. Go to management services does not solve the problem, because the print spooler is not automatically listed to run.

  I was able to print on a staff of 600 Epson printer connect to my Dell computer via USB.

  The next option to solve this problem, what am I looking at? Help, please.

  Thank you.

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error message "Windows can't open add printer." The local print spooler service is not running. Please restat the spooler or restart the machine. "while trying to add printers in Windows 7

  Original title: my laptop has lost all printers and windows & no longer recognizes them. Help! I can't print anything

  I use my laptop computer in a docking station.  I took it out to take for a trip and when I got home I plugged it back (as I always do).  Just before the trip, I have upgraded to Windows 7 and all my printers were working very well.  When I got home and pluged again, Windows does not recognize one of my printers.  When I try to add printers a say8ing error message "Windows can't open add printer."  The local print spooler service is not running.  Please restat the spooler or restart the machine. "I tried to restart and turn off the printer, etc.  Can someone help me?

  Hi RobynGP,
   
  This may occur if the print spooler requires other services, and these services are not running. To resolve this issue, follow these steps:
   
  1. in Services, right-click on print spooler and then click Properties.
  
  2. click the Dependencies tab. The first box list all system services that must work for the print spooler start. These are dependencies.
  
  3 make a note of each service, click OK, and restart each service on which the print spooler is dependent, if the service is not already started. If a service is not started, right-click, click Properties, and then make sure that the startup type is automatic.
   
  Let us know if this helped.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Local print spooler service does not not (Windows 7)

  We bought a new HP PC with Windows 7 in December and the printer worked very well.   Suddenly, he stopped and we get an error Print Spooler Service not working.   I ran troubleshooting, and he said he fixed it, but we try and print to get the error again.

  We thought that we were lucky that our old PC made through the years of Vista and WIndows 7 would be better, but I was wondering if it is still too recent.

  How fix us this so that it remains fixed?

  ETA - PC is an HP, but the printer is a Dell.   Is - this problem is occurring more with certain products?  The printer is of 5 years so not opposed to replace if it will solve the problem but want one that works with Windows 7.

  Can you check it out here:

  Start > type services.msc in the search programs and files, then press 'Enter' > then in the right window, scroll down to the print spooler service, and then double click on "Print spooler" > dependencies

  What is listed under "this service depends on the following system components?

  Then click on the tab "General".

  What is the 'print spooler startup type"set to"automatic "?

  Is the "Service status" of the print spooler "started"?

  If this is not the case, can you "start" the print spooler service?

  BTW, what Dell printer is installed?

• Printer Spooler service turns off - Windows 7

  Hi guys.

  After trying and trying several solutions online to resolve Printer Spooler service, still me have the same problem.
  The spooler goes off in a split second, as soon as I turn it on.

  Ive tried to delete all printers.
  Also there isn't any "Printers" folder in the following directory: c:\Windows\System32\spool

  I got the report of accident for you to source: C:\ProgramData\Microsoft\Windows\WER\ReportArchive

  Please indicate how I can solve the problem of spooler and let it run?

  'Version = 1 '.
  EventType = APPCRASH
  EventTime = 130201389863919618
  ReportType = 2
  Consent = 1
  UploadTime = 130201389889851101
  ReportIdentifier = a5bf9ca2-fd6c-11e2-910f-88532e4161ca
  IntegratorReportIdentifier = a5bf9ca1-fd6c-11e2-910f-88532e4161ca
  Response.BucketId = 62923011
  Response.BucketTable = 4
  Response.Type = 4
  SIG [0]. Name = name of the Application
  SIG [0]. Value = spoolsv.exe
  GIS [1]. Name = Version of the Application
  GIS [1]. Value = 6.1.7601.17777
  GIS [2]. Name = timestamp of the Application
  GIS [2]. Value = 4f35fc1d
  GIS [3]. Name = name of the Module fault
  GIS [3]. Value = HpTcpMon.dll
  GIS [4]. Name = Fault Module Version
  GIS [4]. Value = 7.2.5.51
  GIS [5]. Name = Fault Module Timestamp
  GIS [5]. Value = 4ab0e4d3
  GIS [6]. Name = Exception Code
  GIS [6]. Value = c0000005
  GIS [7]. Name = offset of the Exception
  GIS [7]. Value = 000000000000ad75
  DynamicSig [1]. Name = OS Version
  DynamicSig [1]. Value=6.1.7601.2.1.0.768.3
  DynamicSig [2]. Name = locale ID
  DynamicSig [2]. Value = 1033
  DynamicSig [22]. Name = additional Information 1
  DynamicSig [22]. Value = df36
  DynamicSig [23]. Name = additional Information 2
  DynamicSig [23]. Value = df36e0b278c770807cefd993fac9d654
  DynamicSig [24]. Name = additional Information 3
  DynamicSig [24]. Value = a612
  DynamicSig [25]. Name = additional Information 4
  DynamicSig [25]. Value = a612b538cec9db3725c9e02da3121443
  UI[2]=C:\windows\System32\spoolsv.exe
  UI [3] = Spooler SubSystem App stopped working
  UI [4] = Windows can check online for a solution to the problem.
  UI [5] = check online for a solution (recommended)
  UI [6] = check for a solution later (recommended)
  UI [7] = close
  UI [8] = Spooler SubSystem App stopped working and was closed
  UI [9] = a problem caused the application to stop working correctly. Windows will notify you if a solution is available.
  UI [10] = & close
  LoadedModule[0]=C:\windows\System32\spoolsv.exe
  LoadedModule[1]=C:\windows\SYSTEM32\ntdll.dll
  LoadedModule[2]=C:\windows\system32\kernel32.dll
  LoadedModule[3]=C:\windows\system32\KERNELBASE.dll
  LoadedModule[4]=C:\windows\system32\msvcrt.dll
  LoadedModule[5]=C:\windows\SYSTEM32\sechost.dll
  LoadedModule[6]=C:\windows\system32\RPCRT4.dll
  LoadedModule[7]=C:\windows\system32\USER32.dll
  LoadedModule[8]=C:\windows\system32\GDI32.dll
  LoadedModule[9]=C:\windows\system32\LPK.dll
  LoadedModule[10]=C:\windows\system32\USP10.dll
  LoadedModule[11]=C:\windows\System32\POWRPROF.dll
  LoadedModule[12]=C:\windows\system32\SETUPAPI.dll
  LoadedModule[13]=C:\windows\system32\CFGMGR32.dll
  LoadedModule[14]=C:\windows\system32\ADVAPI32.dll
  LoadedModule[15]=C:\windows\system32\OLEAUT32.dll
  LoadedModule[16]=C:\windows\system32\ole32.dll
  LoadedModule[17]=C:\windows\system32\DEVOBJ.dll
  LoadedModule[18]=C:\windows\System32\DNSAPI.dll
  LoadedModule[19]=C:\windows\system32\WS2_32.dll
  LoadedModule[20]=C:\windows\system32\NSI.dll
  LoadedModule [21] = C:\windows\system32\IMM32. DLL
  LoadedModule[22]=C:\windows\system32\MSCTF.dll
  LoadedModule[23]=C:\windows\system32\nvinitx.dll
  LoadedModule[24]=C:\windows\System32\CRYPTBASE.dll
  LoadedModule[25]=C:\windows\System32\slc.dll
  LoadedModule[26]=C:\windows\System32\RpcRtRemote.dll
  LoadedModule[27]=C:\windows\System32\secur32.dll
  LoadedModule [28] = C:\windows\System32\SSPICLI. DLL
  LoadedModule[29]=C:\windows\System32\credssp.dll
  LoadedModule [30] = C:\windows\System32\IPHLPAPI. DLL
  LoadedModule [31] = C:\windows\System32\WINNSI. DLL
  LoadedModule[32]=C:\windows\system32\mswsock.dll
  LoadedModule[33]=C:\windows\System32\wshtcpip.dll
  LoadedModule[34]=C:\windows\System32\wship6.dll
  LoadedModule [35] = c: Files\Microsoft Shared WLIDNSP. DLL
  LoadedModule [36] = C:\windows\system32\PSAPI. DLL
  LoadedModule[37]=C:\windows\system32\SHLWAPI.dll
  LoadedModule [38] = C:\Program Files\Bonjour\mdnsNSP.dll
  LoadedModule[39]=C:\windows\System32\rasadhlp.dll
  LoadedModule[40]=C:\windows\System32\fwpuclnt.dll
  LoadedModule[41]=C:\windows\system32\CLBCatQ.DLL
  LoadedModule[42]=C:\Windows\system32\umb.dll
  LoadedModule [43] = to C:\Windows\system32\ATL. DLL
  LoadedModule[44]=C:\windows\system32\WINTRUST.dll
  LoadedModule[45]=C:\windows\system32\CRYPT32.dll
  LoadedModule[46]=C:\windows\system32\MSASN1.dll
  LoadedModule[47]=C:\windows\System32\localspl.dll
  LoadedModule [48] = C:\windows\System32\SPOOLSS. DLL
  LoadedModule[49]=C:\windows\System32\srvcli.dll
  LoadedModule[50]=C:\windows\system32\winspool.drv
  LoadedModule[51]=C:\windows\System32\PrintIsolationProxy.dll
  LoadedModule[52]=C:\windows\System32\HpTcpMon.dll
  LoadedModule[53]=C:\windows\System32\HPTcpMUI.dll
  LoadedModule[54]=C:\windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.17514_none_a4d6a923711520a9\COMCTL32.dll
  LoadedModule[55]=C:\windows\System32\hpzjrd01.dll
  LoadedModule[56]=C:\windows\System32\hptcpmib.dll
  LoadedModule[57]=C:\windows\System32\mgmtapi.dll
  LoadedModule[58]=C:\windows\System32\snmpapi.dll
  LoadedModule[59]=C:\windows\System32\wsnmp32.dll
  State [0]. Key = transport. DoneStage1
  State [0]. Value = 1
  FriendlyEventName = Stopped Working
  ConsentKey = APPCRASH
  AppName = Spooler SubSystem App
  AppPath=C:\windows\System32\spoolsv.exe ".

  Hi Marius,.

  As you mentioned that you are unable to find the folder of spool, check if spoolsv.exe is present under C:\Windows\System32.

  Follow these tips and check if that helps.

  Method 1: Run the built-in printer Troubleshooter and check if that helps.
  Open utility troubleshooting printer

  Method 2: I suggest you refer to the suggestion of Gokul T responded on November 6, 2009, for a similar problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-print-spooler-will-not-start/79938f9a-34b2-4ddf-8101-e20f7fa9c2d0

  You can also consult about it and see the advice given by Freak05, Tuesday, July 27, 2010.

  Print spooler keeps stopping on Windows 7

  http://social.technet.Microsoft.com/forums/Windows/en-us/fd7f46d3-Baa1-4a38-9AD3-dec5426d9297/print-spooler-keeps-stopping-on-Windows-7

  Reference: why I can not print

  Follow the suggestions in the thread and let us know the results.