Windows search 4.0 index does not drive C:\
Hello
Windows 4.0 search will not index my C:\ drive.
I can change the options included index all my mapped drives, BUT the C:\ drive does not show.
How can I configure Windows Search 4.0 to INCLUDE the C:\ drive?
Thank you very much
Rebuild your search index:
In addition, http://technet.microsoft.com/en-us/library/cc771814%28WS.10%29.aspx
Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.
Tags: Windows
Similar Questions
-
Windows 7 Search index does not maintain the sites indexed
My search indexer is not indexed parameters locations I do and after a day or two, he returns to the original setting whicgh was the Start Menu. I changed the indexed locations to include most of my C drive, and it indexes all (the search function works well for awhile) but a day or two later, when I do a search, nothing comes. I double-check the settings and find that it has been restored to the original indexed locations.
My system is updated regularly and I'm using Avast antivirus.
Thank you
Hi TomHathcoat,
Thanks for posting in the Microsoft Community.
I understand that you are facing the question with an indexer search does not maintain the indexed locations.
Method 1:
I suggest you run the troubleshooter and check if this solves the problem. See the following article to do the same thing.
Open the troubleshooter of search and indexing.
http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter
Method 2:
Try to rebuild the search indexing. See the steps in the following article.
http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options
See also:
Improve Windows searches using the index: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions -
'Windows 7 search' does not & "indexing does not work" (on libraries)
'Windows 7 search' does not & "indexing does not work" (on the libraries).
How can I correct (get indexing and searching for work) research one of the features of pride & joy MS on Librearies?
The Indexing Options Control Panel indicates "Indexing does not work" & the library places panel shows Unresponsive.
The service started Windows search and then stopped.
Look forward to any suggestions
Ed.
Hello EdJarvis,
Thanks for the return of the response. Below is a link with the same problem reported. You did some of the steps listed to try, but there are others listed.
Windows Search service does not (Windows 7)
Please let us know status.
-
Vista Search & indexing does not work
When I go to Control Panel/Indexing Options/Advanced/show Options all the locations of some files are to check, but the OS(c:) est grisée.) I had turned off at the same time & now cannot get it turned back on.
How to make this work?
Why indexing taking so long?
Why can't stop indexing or turn it off for awhile (it interferes with other programs sometimes)?
Why seek complex with a bunch of drop downs and it usually does not even get just a subfolder. I searched (using the F command) 3 letters in a title only and got a response from an area not indexed that contains NONE of the letters, and it took several minutes. @!
Some MS answers say to use the troubleshooting Index feature, but it doesn't seem to be indexing window.
HelloThese two showed more problems of search for Windows 7, however, they also seem to be
able to affect Vista as well.
1. one thing that seems to have an impact on several is the bit REACH has been set on some files
Index cannot be set and search for cannot be found. So the ATTRIB-a *. * bps, which means archive
is REMOVED for the files in the folder/directory Parent (top) and those in all the subfolders/sup-
directories.Check out this link.
http://mikekirby.spaces.live.com/blog/CNS! E008D856FA702CAC! 758.entryHow to play and off the read-only file and folder attribute in Windows (see the second method)
http://www.SevenForums.com/tutorials/63741-read-only-file-folder-attribute.html------------
2 another problem seems to be McAfee and some other antivirus programs are interfering with the
Index or search functions. McAfee, must be uninstalled using the uninstall routine in
Windows AND the removal of McAfee too of course no remains are left. (Possibly other antivirus
programs are also what causes this error.) Of course, you want to move to another antivirus
MSE (Microsoft Essentials), Avast or other.===============================================
===============================================Windows Search does not work or research are slower
http://support.Microsoft.com/GP/windows_searchTroubleshooting Windows Vista search & indexing errors
http://www.WinVistaClub.com/T24.htmlReconstruction of the Index in Windows Vista
http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/
How to enable or disable the search Index in Vista
http://www.Vistax64.com/tutorials/69564-index-enable-disable.html
Improve Windows searches using the index: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions================================
Tips for finding files
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-filesHow to use advanced search in Vista Options
http://www.Vistax64.com/tutorials/75451-advanced-search.htmlHow to restore the page button on the Start Menu after installing Vista SP1
http://www.Vistax64.com/tutorials/145787-Search-start-menu-button-restore-after-SP1.htmlHow to restore the context Menu item search after installing Vista SP1
http://www.Vistax64.com/tutorials/134065-search-context-menu-item-restore-after-Vista-SP1.htmlHow to create a shortcut on the desktop search in Vista
http://www.Vistax64.com/tutorials/126499-search-desktop-shortcut.html----------------------------------------------------------
Win Key F opens advanced search
Searching in Windows Vista, part 1
http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-1-secrets-of-the-search-boxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file. Help, please.
As I suggested previously, conversion to a format like
. WMV before you import it into Movie maker may be the solution.The free Converter from Microsoft can be a place to start:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
(runs under WinXP SP3 / Vista / 7)When you install the program...
Start Microsoft Expression Encoder 4
(Start / programs / Microsoft Expression /)
Microsoft Expression Encoder 4)On the "Load a new project" screen...
Left click... "Transcoding project '...When the program opens, click on... File / import...
(If at any time you get lost while browsing
the program of... to... Window / active Reset
Type or workspace... CTRL + SHIFT + R)Look for the file/s that you want to convert.
(If files do not appear... open the fall
window and choose... All files)Click (highlight) left the files and the left on the Open button.
You can see the files in the "Multimedia content" pane
In the right column... left click on the tab "Output"...
Open the drop directory window and choose an output folder.
(This is where you will find your converted file)On the left, click on the button "encode".
Wait... video encoding CPU intensive and can
be a slow process. It is always best if you do not have
multi-task while files are encoded.Now... try import you again. File WMV in Movie Maker.
More converters:
There are to many converters available on the net...
the following links are some examples. You can
need to experiment to find the best result.Proceed at your own risk *.
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)(1) format Factory (freeware)
http://www.videohelp.com/tools/Format_Factory
(the 'direct link' is faster)
(the file you want to download is: > FFSetup270.zip<>
(FWIW... installation..., you can uncheck
'all' boxes on the last screen... even in this case, it may
install the Ask toolbar on your system)
(Windows XP / Vista / 7)First, you will need to decompress the file or just open the
Drag FFSetup270.exe out of the folder
and drop it on your desktop. To install left click.(2) Freemake Free Video Converter (freeware)
http://www.Freemake.com/free_video_converter/
(Windows XP / Vista / 7)(3) Koyotesoft Free Video Converter
http://www.koyotesoft.com/indexEn.html
(2000/XP/2003/Vista/Seven)(4) Sothink Free Video Converter
http://www.Sothinkmedia.com/video-converter/
(Windows XP / Vista / 7)(5) hamster Free Video Converter
http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
(Windows XP, Vista, 7)
(If you choose Custom Installation
You can uncheck additional modules you
do not want to install)(6) quick Media Converter
http://www.Cocoonsoftware.com/
(Win XP, Vista, Win 7 Home Premium)(7) SUPER © Simplified Universal Player Encoder & Renderer
http://www.videohelp.com/tools/Super
(the download mirror site is faster) (Windows XP / Vista / 7)(8) Xilisoft Video Converter
http://www.Xilisoft.com/video-converter.html
(not freeware but receives good reviews)
(Windows XP (SP2 or later) / Vista / 7)Good luck...
-
My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?
Hello
I see nothing unusual, except that there should be a "0001", or even "0002"...
When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...
Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.
-
I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?
original title: why isn't my laptop recognize the eathernet link?Go to your computer manufacturer's support web site
and search for the Windows XP drivers for your specific computer or motherboard model number.If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
Then, after installing XP install all device drivers, start by installing the card mother/chipset driver first,
then the SATA, Audio, USB, LAN, etc, drivers.List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
Graphics/video drivers:
Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-usJ W Stuart: http://www.pagestart.com
-
Instant Search does not work in outlook 2007 (SP2), when activated windows (vista Business Service Pack 1 32 bit) indexing says "indexing does not work" and only forward tab is enabled.
Also tried outlook--> tools--> instant search--> search options--> to check the boxes in 'research' and 'indexing' after pressing 'OK', he said "a problem has been experienced. trying to change which data files to index Some of these changes may not have been saved. »
When tried to run the Windows search (already in automatic mode) service, it says "Windows Search service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. »
Hello RRAIK,
Thank you for visiting the website of Microsoft Windows Vista Community.
Try the following steps:
OPTION 1:
How to disable or enable the index service
NOTE
This will enable or disable the Index for Vista completely. This will not affect the regular nonindexed Vista search function.
1. open the Start Menu.
2. the area of the white line (search) type services and press ENTER.
3. click on continue in the UAC prompt.
4. scroll down and right-click on Windows Search.
5. click on properties.
6. to turn off the Index-
(A) click on the Stop button.
(B) next to startup type, click the arrow on the menu drop-down and click on disable.
(C) click on apply.
(D) proceed to step 8.
7. to activate the Index-
One) next to startup type:, click the menu drop-down and click Automatic.
(B) click on apply.
(C) click the Start button.
NOTE: If the search service Windows does not start, then let it set on automatic and see: how to fix startup error for Windows Search Service to activate the Index in Vista
8. click on OK.
9. close the Service window.
SECOND OPTION:
How to enable or disable the Index for a drive
NOTE
This will be only enable or disable the Index for the selected drive.
1. open the Start Menu.
2. click on computer.
3 right-click on the hard drive, to enable or disable the Index, and then click Properties.
4. to disable the Index-
(A) uncheck Index this drive to speed up the search for box.
(B) proceed to step 6.
5. to activate the Index-
(A) check the index of this player for a search box.
NOTE: Step 7 in the section ONE OPTION above should be defined activated to operate at.
6. click on apply.
7. Select (dot) apply the changes to the drive, subfolders, and files.
8. click on OK.
9. click on continue in the window of access denied.
10. click the button ignore all error application of attributes window.
NOTE: Vista's not any attempt to mess with the boot files. This is why you get this error and must select ignore all to skip the editing of these files.
11. This can take a long time to complete depending on the size of your hard drive, then sit you, kick your feet up and relax a bit.
12. When finished, click OK to close the drive properties window.
This should solve your problem.
Let us know if these steps solve your problem. I hope the information is useful.
Kind regards
Anthony
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Search for Time Machine does not work in the mail.
Hello
I'm trying to retrieve/view old e-mail my Time Machine ups back. I am backup on an external hard drive.
When I get TM since the Mail, search application 'in time' does not work. If I go TM said Finder, or from the desktop, it works fine.
I had to reinstall my OS and am trying to update on El Capitan, (thanks to the kind assistance of AppleCare!), but in the meantime I am eager to find those old emails.
Any suggestions please? Thank you.
Although you can restore a snapshot of Time Machine messages in the Mail application, it usually will not work with messages that were saved by an outdated version of the mail. In this case, you must use another method.
Please triple - click anywhere in the line below on this page to select:
~/Library/Mail
Right-click or Ctrl-click on the highlighted line and select
Services ▹ Open
the contextual menu.* should open a folder.
Enter Time Machine and scroll to the snapshot that you want to restore from. The folder named "Mail" are subfolders named "V2" and/or "V3" (according to the version of Mac OS X that was used at the time that the snapshot was taken.) Inside of one of these subfolders are several subfolders representing your e-mail accounts. The name refers to the email addresses that you use. Select the account folders you want and then select restore... to... in the action menu (gear icon) in the toolbar of the Snapshot window. Restore the files on the desktop and not in their original location.
Import the mailbox in the folders that you restored to the office. The imported messages appear in a new mailbox. Move those you want to keep everywhere where you want and delete the rest. Then, delete the files on the desktop.
* If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
-
I have Windows XP Pro on my computer tower but have now tried to load Windows 8 but I need to remove it again to load Windows 7 Home because most does not
How to perform a new Installation of Windows 7:
http://pcsupport.about.com/od/OperatingSystems/SS/Windows-7-clean-install-part-1.htmHow to do a clean install with Windows 7:
http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.htmlMigration from XP to Windows 7 Easy Transfer and a USB key:
http://www.howtogeek.com/HOWTO/3179/migrate-XP-to-Windows-7-with-easy-transfer-and-a-USB-drive/Windows Easy Transfer for transferring from Windows Vista or XP:
http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transferIf the family Windows 7 product key was already activated, you need to activate by phone. Both your XP COA / product key and Windows 7 very practical key product and then activate by phone following the steps below.
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700J W Stuart: http://www.pagestart.com
-
I'm running Win 7 ultimate in a virtual machine under Parallels on an iMac. In general, everything is smoothly for more than a year. However, the search function of Windows 7 is completely dead. It is not serious what I get or what directory I am, Win 7 is not even start looking. If I try to add a supplementary search as a date criterion, it does not help, either. Is it necessary to activate it first in some way? I checked under default programs in Control Panel and Windows Search Explorer says "this program has all its faults." What I am doing wrong?
Hello
Have you made changes on the computer before this problem?Your index requires virtually no maintenance. However, if the index find the files you know problems must be located in an indexed location, you might need to rebuild the index. This can take a long time to complete, so avoid this step unless you have given the index enough time (several hours) to correct the problems first. To rebuild the index:Method 1:
a. open indexing and Search Options by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Indexing Options.
b. click Advanced Options, click the index settings tab and then click on rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questionsMethod 2:
You try to run the tool for indexing and search. Check out the following link.
http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-TroubleshooterMethod 3:
You can run System File Checker scan. Read the following article.How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833Also, check out the links below and check if that helps.
http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-optionsIt will be useful. -
Original title: DVD problems
I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D what is the solution. I tried the fix and I also used the Center 'Fix it '.
Hello
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?
3 are. what patch you referring?
4. this happens to you with some specific discs?Reinstall the drivers for DVD player and check.
1. click on start > run
2 type devmgmt.msc and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
3. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
4. When you are prompted to confirm that you want to remove the device, click OK.
5 restart the computer.
6. when the computer restarts, the drivers will be installed automatically. -
Original title: green screen
my windows Vista Home Basic Edition does not show the Office when I log in. it shows only a green screen. I tried all the options in F8 mode with no result. How can I fix it without losing any information on the hard drive?
Hello
1 - do you mean that you get the green screen even in safe mode?
2 did you recent hardware or software changes to your computer before this problem?
If you are unable to start desktop even in safe mode, then you try to perform the verification and startup repair.
Reference: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions
-
I try to use a pro 7 product key offical windows to activate windows 10 pro, but it does not work?
If I search on possible improvements, he says it should work?
Try the chat support:
Activate your Windows 10 license with Microsoft Chat support
-
Window of the printer icon does not appear on the taskbar
original title: printer icon window
Window of the printer icon does not appear in my taskbar to key on can I print text. Also the Tools icon doesn't show ethier. How can I make it appear so that I can use them for print or to send or forward emails?
If you are referring to the print queue icon in the notification area is missing, click the Show hidden icons button to see if its there. It will be displayed only when a print job is in progress.
To display print queue - Windows - Microsoft
You can also run the troubleshooting of the printer.
Open the printer Troubleshooter
Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.
For more information, visit the below mentioned link:
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx
Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT
You can see the below mentioned links.
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer
--------------
May I ask what tools icon is missing for what program?
Maybe you are looking for
-
Click and drag in the Favorites or in text fields does not
Click and drag does not work with favorites anywhere, or any text fields. He used to work a lot in v11, but not v12 I tried to revert to my version of Firefox v11 backup but it keeps automatically updated to v12 despite disabling auto update in the p
-
Black screen randomly on the Satellite A200-10 x
Hi, recently my laptop started giving me a black screen for like once a day. Now, the past 2 days its been quite... 4 times this morning! The symptoms are: black screen + DVD drive LED lights up and stays like that. So, I stop it manually.Sometimes h
-
PROCEDURE ENTRY POINT SET THE 'W' DLL DIRECTORY COULD NOT BE LOCATED IN DYNAMIC LINK LIBRARY KERNEL32. DLL. MESSAGE APPEARS... PROCEDURE ENTRY POINT SET THE 'W' DLL DIRECTORY COULD NOT BE LOCATED IN DYNAMIC LINK LIBRARY KERNEL32. DLL. THIS MESSAGE AP
-
SHIELD NETWORK WRT 1900AC?
WRT 1900AC provides a network (shield) firewall against external intrusion?
-
Hello11.2.0.1I have a lot of expired and users locked in our database of prod.Is it OK if I drop all the? Will my database bug not down?The list has expired and blocked users:SPATIAL_WFS_ADMIN_USRSPATIAL_CSW_ADMIN_USRAPEX_PUBLIC_USERDIPORACLE_OCMMDDA