Windows Server 2003 network problem

Similar Questions

• Modem for Windows Server 2003 comments?

  Have a client who we want to virtualize, one of the Windows Server 2003 servers and has a modem attached to it for incoming/outgoing faxes. How would the more successful to get a modem on a box of ESXi 4 through to Windows Server 2003 without problems?

  I would like to watch the series on IP.  You will take ESXi and your material out of the image that's going to be the virtual machine, to communicate with the device.  Digi makes these devices - http://www.digi.com/products/serialservers/ or if you are looking for in the forums, you will see what others use.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Tecra A10 - 12O: installing the driver network card in Windows Server 2003 R2 Std

  Hello

  I received 6 laptop Tecra A10 - 12O, and we need to install Windows Server 2003 R2 Standard Edition with SP2 in all these six machines. Windows Server 2003 has been installed perfectly, but now we have only the network LAN card to work but we are unable to install its driver. When I installed Windows XP from the supplied DVD for Toshiba, it says Intel 82567V Gigabit network adapter. I tried to download the drivers for this adatpor of drivers Toshiba, Intel Web site, but it will not install in Windows Server 2003. I also tried manually force to choose and install a driver from the list, I choose that it will install but shows yellow question mark in Device Manager means that it does not work with this driver.

  I also tried the same Intel 82567V drivers from some sites non-Toshiba, of these models using the same network card, but is not truck drivers at all.

  I understand these laptop computers does not support Windows Server 2003, but these were ordered to be used as servers with Windows Server 2003 Standard Edition and I am required to make the Installer only with activated and installed network adapter.

  I try last week and exhausted all means to get the installed network adapter driver, but all have failed. Can someone please help with this? All support will be highly appreciated.

  Thank you.

  Charwal

  Hey Buddy

  If I m not wrong Windows Server 2003 uses the same drivers as Win XP and I guess that it s driver problem not a LAN, but perhaps also the problem of Windows Server 2003 installed.

  You are right; the LAN chip seems to be Intel 82567V and the LAN driver downloaded from Intel page should work 100%.

  In your case, I would recommend installing the chipset driver.
  Remove the LAN card from Device Manager, then restart the laptop.
  Then go back to Device Manager and update driver in pointing devices Manager to the place where the driver downloaded LAN was stored on the HARD drive.

• TCP/IP services has encountered a problem and need to close. Windows Server 2003 R2 SP2

  TCP/IP services has encountered a problem and need to close.

  Windows Server 2003 R2 SP2

  That left me without a network or to the Internet on a PDC named DOMCON.

  Tried so far:

  1. last signed NIC drivers installed (8.0.27.0) to HP NC3120 Fast Ethernet NIC.

  2 netsh int ip reset resetiplog.txt

  reboot, enter the details of the intellectual property, etc... NO JOY!

  This server has been running for years until now.

  I can join the registry and files DOMCON_MpsReports.cab NetworkSubkey.reg section.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Here is the link:http://technet.microsoft.com/en-us/windowsserver/bb512919.aspx

• Wireless AP do not communicate with Windows Server 2003 box on the cable network

  I have a wired network which has 2 PC under Windows 7, 1 PC Windows XP Pro, 2 LAN printers and a Windows Server 2003 as customers.

  The network through a switch and a router Comcast of class business.

  I am trying to add a wireless network access point and when I do the AP and the box of Windows Server 2003 are unable to speak / ping each other, even if strangelyboth of devices are able to communicate with all devices and clients on the network. These two will be just talk to each other. It doesn't matter if I use an access point or wireless router. Any wireless device attached with a cable of the switch won't talk on the server and vice versa.

  Laptop wireless connected to the AP take a DHCP of the router/modem Comcast address and can get on the internet, they just can't see the server as cable customers can. Any suggestion would be appreciated to grreatly.

  Thank you

  Greg

  Hello g_gauthier70,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Technet Windows Server General category.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
   
  Thank you

• The DDE network between two PCs running windows server 2003

  We seek to transfer data between two excellent sheets (Office 2003). Two excellent books are on different PCs running windows server 2003 and office 2003. The two PC's belonging to the same workgroup. One of them being run by Siemens PCs 7 process control system. I have ensurred running on both PC Netdde.exe. When excellent both books are on the same server they connect perfectly. When I run the client excel book on the other Pc (without changing something in the formulas of cells) the connection is lost. The DDE connection is approved on the PC server and this connection permission is full control for everyone. What is perhaps the reason for this problem? I think I missed a point. Can I get help for this. Thanks in advance for you.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/categories/

• Due to an unidentified problem, Windows cannot display Windows Firewall for windows server 2003 r2

  I opened the firewall windows on windows server 2003 R2 and also installed a quick heal antivirus total security 2009 valid until April 2, 2012

  display error on the screen due to an unidentified problem, Windows cannot display Windows Firewall settings

  thanx

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Remote access is installed, but refuses connections on Windows Server 2003. Why is this and how can I solve this problem?

  Reinstalled Windows Server 2003, configure remote access, unlocked the ports, and I can't connect with my Windows XP computer. I had no problem until I reinstalled.

  Hi DistrictDigital,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows Server - general forum

• Problems installing Windows Server 2003 on a T61

  Hello:

  I had installed Windows Server 2008 on a T61 and it was an installation smoothly with minor hickups.

  But some of the other required packages Windows 2003 Server (they do not support Server 2008 yet!). So I started to install Windows Server 2003 and that's where I found a lot of questions:

  1. I had to change the SATA in compatibility mode (Windows installation has complained that no hard drive found).

  2. I installed Windows Server 2003.

  3. I can't get the wireless network adapter to work. I tried the drivers for Windows 2000/XP on the Lenovo site, but the system does not recognize the card.

  4. the Device Manager lists the devices unrecognizable following three:

  Network controller (must be the wireless card. Properties/Details says "PCI VEN_8086 & DEV... »)

  Controller memory PCI (properties/details says "PCI VEN_8086 & DEV... »)

  Unknown device (properties/details says "ACPI\ATM1200\4 & 374CCB25 & 0")

  5. when I insert a USB key, it is recognized and a new disk is assigned. However, I have an external USB drive and when I plug that in, the system does not recognize the drive.

  Help, please.

  Vincent

  Roz:

  Yes, the wireless works on my laptop. Send me a private message and I can send you the driver that worked.

  Vincent

• I am running Windows Server 2003 R2 and am having a problem with a user profile.

  I'm running windows server 2003 r2 and am having a problem with a user profile, we have a logon.bat file that runs to map drives, but also call a logon.html file, that user gets the logon.html appear, but IE blocked then this happens only for a single user, others are ok. Any ideas please?

  original title: profile of Win 7 issue

  Hello

  Your Windows 2003 R2 server question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Hope the information is useful.

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• Problem installing Windows server 2003 on Poweredgeedge R510

  Hello

  I want to install Windows server 2003 R2 SP2 32 bit on R510 server.its gives me the error of the disc is not present... How ever I have successfully installed windows server 2008 R2 sp1 on the same server. Yet once again, I installed server 2008 that it has been installed without any error.

  Can help me please out.why his error on Windows server 2003.

  You will need the drivers of the controller to present at the F6 prompt.  They are native to the Server 2008 R2 DVD, but not in 2003.  Download this DVD ISO to help load the drivers of the controller for your server and load the operating system: http://downloads.dell.com/sysman/cdu_1.6_core_173_A01.iso

  Kind regards

• new PowerEdge: windows server 2003 standard r2 install problem

  Hi all

  so I started with this procedure

  1. Insert the Dell Systems Build and Update Utility CD or the Dell and Documentation DVD systems management tools in the CD player.
  2. Reboot your system and boot from the CD/DVD.
  3. Select Dell Systems Build and Update Utility to go to the Dell Systems Build and Update Utility Home screen.
  4. Click the server operating system Installation.
  5. Follow the instructions step by step to set up your hardware and to install your operating system.

  Now in the select list of Os, I chose windows server 2003 sp2. When I come to the part where it asks for my o/s drives, I get a "invalid" drive, and my windows install dvd is ejected.

  I use our msdn 2939.3 disc titled "Windows Server 2003 R2, Standard Edition with Service Pack 2.

  I tried our other msdn discs, but they no longer work.

  so I'm stuck.

  All I need is to put in place the RAID-1 and windows server 2003.

  Anyone who is willing to light on that?

  
  

• Windows Server 2003 cannot connect multiple users.

  I have a server with windows server 2003 and active directory configured to log users on a network. Not on RDP, just ordinary field. The problem that I am facing is that only my account and the administrator account can log on. I have another account to try to test with, but it is said, no newspaper on the servers are currently available to take your request. How should I do?

  I have a server with windows server 2003 and active directory configured to log users on a network. Not on RDP, just ordinary field. The problem that I am facing is that only my account and the administrator account can log on. I have another account to try to test with, but it is said, no newspaper on the servers are currently available to take your request. How should I do?

  Beyond the reach of these consumer forums.

  It is the only domain controller in the domain?  Have you gone through the troubleshooting steps basis for DCs (DCs)?  If the machine you are trying to connect using the credentials of domain see the domain listed in ADU & C, etc.?

• FTP connection times out on Windows Server 2003 when you run Windows Firewall

  This seems to come up recently, perhaps with a recent Windows automatic update.

  I have FTP server running on Windows Server 2003 R2.

  The NIC has the firewall Windows is activated, which allows port 21 (FTP) through.

  When you use an FTP client from a workstation, the FTP client expires when you navigate to a folder with many files, say the folder/images of a website with 10 + MB in total (which isn't really that much). Navigate to other folders with smaller files seems fine.

  Now, when I turn off the firewall of the server, then I can use a FTP client on a workstation to access any FTP folder regardless of the number of files or the size of files and everything is fast fast.

  This brings me to the conclusion that the problem lies in the Windows Server 2003 firewall, and we must have this option disabled for FTP clients do not expire.

  Hi Scott a. Keen,.

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512919