Any advice on a good or very good sound card

Similar Questions

• HP Compaq 6000 SFF Elite: Very good Sound Card

  This desktop PC HP Elite 6000 has a very bad sound system, and it must be replaced with a very good sound card.  I have two good speakers powered by USB, I use, but I need a sound card.   I have two slots... A 2.5 PCI "low profile card.

  length 6.6 "power max. 25W and a PCI Expressx1 half height length 6.6" max power 10W.

  So, which card its somone recommend here?

  Dear customer,
  
  Welcome and thanks for posting your question on the Forum from HP Support.

  Its recommended and its low profile card:

  StarTech PCISOUND5CH2 card PCI one Surround sound 5.1 CH 8738 LX adapter + Low Profile

  ASUS Xonar DG 5.1 its PCI card & headphone amp compact support Inc.

  WELL, Creative Sound Blaster Audigy SB0570 PCI 24 bit Sound Card 7.1 LOW PROFILE

  StarTech 4 Channel Low profile PCI Sound Adapter Card PM28738-2X2A PCISOUND4LP

  Hope this helps, for other queries in response to the post and feel free to join us again.
  
  * Click on the white button on the right to say thank you Thumbs Up *.
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
  
  Thank you
  VSL85
  Although I am an employee of HP, I speak for myself and not for HP

• In Windows NT Workstation 4.0, I get this error message: cannot find the sound card with this port number. Please check your settings and try again. Any help?

  There is this computer that I recently installed Windows NT Workstation 4.0 on and I would like to know how to install sound blaster 16, on this without receiving this error message. If someone wants to say how it is obsolete or install a new operating system, please do not post. Thank you. If anyone has the same issue on an ordinary pc or Virtual PC, you can publish. It is a computer. If you're going to say how microsoft does not support, I need to install a better operating system or the above mentioned inconvenience or something similar to those, please do not post. Any help will be appreciated. The specific sound card is Creative Labs sound blaster Pro 16 of 1.x.

  Hello Grant Heckel,

  Windows NT Workstation 4.0 is not supported in the Microsoft Answer forum.

  You can do a search on the internet and find information about the Sound Blaster Pro 16 and NT 4.0 Workstation.

  Such a thread is listed below:
  http://www.pcguru.plus.com/VirtualPC.html

  Sincerely,

  Marilyn

• I just bought a windows xp disc and try to save the key and it won't let me not also tried by phone, I don't no what to do to get the registerd disc any help would be good

  I just bought a windows xp disc and try to save the key and it won't let me not also tried by phone, I don't no what to do to get the registerd disc any help would be good

  Do you mean "activate"? Registration is optional; Activation is not. You don't have not given us enough information to targeted assistance. What type of XP installation disc are you using? What product key you installed with (please do not post!)? What happened when you talked to the man during telephone activation? If the failure of activation by phone and you did not wait for a human to come on the line, try this once again and wait for the Rep of decision-making supported MS - MVP - Elephant Boy computers - Don ' t Panic!

• Can anyone recommend any software design of good quality such as CorelDraw or Adobes product (s) freeware? For windows or other OS?

  Can anyone recommend any software design of good quality such as CorelDraw or Adobes product (s) freeware? For windows or other OS?

  I know that it probably isn't on the level or the level of export like the ones mentioned, but what is it?

  Two editors/graphic design software popular free photo with many features are linked to below.

  Paint.NET

  http://www.getpaint.NET

  GIMP

  http://www.GIMP.org/downloads

  Inkscape:

  http://Inkscape.org/

  About Inkscape

  A publisher of vector graphics Open Source, with capabilities similar to Illustrator, CorelDraw, or Xara X, using the W3C standard Scalable Vector Graphics (SVG) file format.

• Just starting to use flash CC pro using a PC. The mouse does not work on all popup windows. It works very well on the selection of everything etc, but not on the pop-up windows? Any advice? Thanks, Jim

  Just starting to use flash CC pro using a PC. The mouse works on everything except the popup windows. Any advice? Thanks, Jim

  kglad and Mohan, thanks for the help. I found what was wrong. I had the text of the rule too high DPI screen. I lowered and the mouse works on everything except that it's harder for me to see.HA apparently it was causing a conflict with the mouse. Maybe this will be useful to help someone else down the line. Thanks again, Jim

• What would be a good graphics card for my HP Compaq d330 desktop pc replace the graphic edge

  Hi, I'm looking to upgrade the graphic edge on my old HP Compaq d330 pc desktop. I know that racing machine on a processor 2.66 mhz and will support an AGP x 8 card and I'm upgrading system Ram of 512 MB (4x128mb cards) to 2048 MB (4 x 512 MB, maps).
  Currently the video ram is 64 MB (on board) and I thought I'd do a card of 128 MB AGP on EBay, but don't know what that you get it.
  Everything seems to be so slow graffics wise and ancient beauty is holding still to display certain pages of the sites, I am currently unemployed and so I use the little girl on the net a lot trying to find work, good shopping market e-mail deals, processing etc.
  I thought that upgrading the memory and graphics would contribute to the display and speed in order to improve and allow me to multi task email resume and processing more easily in addition to prolong his life and make surfing easier and a lot less loading time.

  As you can imagine that I am running on a budget very tight and unable to afford a newer pc.
  
  Any advice would be greatly appreciated.

  Hello:

  On my d530 which is basically the same model, I used the nVidia geForce 6200 128 MB AGP card both the ATI Radeon 9600 128 MB AGP card.

  They worked very well.  If you can't find one of these cards with more memory so much better.  But most of them came with 128 MB (which was a decent amount of memory back in the day).

  There is a setting in BIOS in the d530 (and perhaps the d330 as well) which allows you to spread the amount of system memory to add it on the video card to help with graphics performance - up to 256 MB.

  So, you could have 128 MB memory graphics dedicated card, over up to 256 MB of system memory.

  These two cards will allow also the PC run full Windows 7 32-bit as well.

• A good graphics card?

  Do you know of ANY good graphics card, I'm on a budget of 0-150. I'm trying to run an addon for my game called "Shaders." I usually get 40-60 fps without the addon installed, but with the installed addon it gives me less than 24 frames per second. I want to get more than 40 FPS with the addon. Do you know a good graphics card that is compatible with the Addons of Shaders AND my computer?

  I want a good game graphics card.  Please help me!

  Also, is this a good graphics card? The case, please send a link to a

  http://www.Newegg.com/product/product.aspx?gclid=CjwKEAjw9LKeBRDurOugs43jnlgSJACUXqHxebYveebSNo9AW_A...

  Specifications of the computer:

  Windows 7 Home Premium
  
  Model: p6 - 2127c
  
  Processor: AMD A6 - 3620 TRA with graphics HD Radeon (TM) 2.20 GHz
  
  Installed memory (RAM live): 8,00 (7.78 usable) GB
  
  System type: 64-bit operating system

  I'm sorry that I have not responded to your previous thread.  I could not find it.

  I did some more research with XFX.  All their cards in the 7000 series with a serial with a P n start (2014) require the UEFI BIOS.  They are at the height of the P8 series #'s.  Their cards with serial # s beginning with O (2013) should be fine.

  The fact is that there no cards that will work with the power supply (PSU) (300W) that will do what you want it to do.  Here's a map that sounds good.  However, it requires a power supply at least 500W with a 6 power connector pins.  I suggest at least 600W for peak power needs.  You must contact the manufacturer's Technical Support to ensure it will work with your BIOS.

  The motherboard for most recent amateur quality components.  You can't get the performance you want even with a high-powered video card.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Any advice on dialog control slow path?

  Hello

  I have a trajectory control that gives me LV2010 and WinXP. My VI seems to work very well (it maintains entered analog, etc.) and the rest of the computer seems to work as well (can change windows, manipulate other applications, etc.), however the file dialog box seems to be very slow. It takes about 10 seconds for a click inside the dialog box and select a file. The control works (if I'm patient enough), but very slowly, as if the windows/computer is too busy to handle the file dialog box.

  Any advice concerning the control of trajectory?

  I think what he's referring to is that the loop can be run very fast and slow everything down. Try to put a 50mS delay in the loop and see what happens.

• A good video card or SOV made a difference in Photoshop?

  Photoshop CC makes use of the VPU or video card to process photos faster?  Does make a difference for a high-end card?

  Hi daryls

  Yes, a good graphics card makes much difference in photoshop.

  Like 3D, puppet warp features require a very good GPU.

  Here is a list of graphics cards supported by photoshop: Photoshop CS6 GPU FAQ

  I would recommend going for a graphics card that has devoted at least 1 024 MB of VRAM

• Someone else has Apple Airplay jumping and drop outs when streaming music?  WiFi is not the problem, and there is nothing around the units of airtime to interference.  Impossible to listen to music.  Thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.  I have a unit of airtime plugged directly on my stereo receiver that feeds music throughout my house.  My WiFi connection is not the problem and there is nothing to cause interference.  Airplay modules are not more than 15 feet distance modem or range Extenders.  Someone else has this problem and, hopefully, a solution?   I'm tired of doing factory reset all the time.  Many thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.

  By "Airplays" what are you actually refers to... Base station airPort Express, Apple TV, or something else?

  ... and "V1 to V2" do you mean you replaced a 1st generation 802.11n AirPort Express with a 2nd generation?

  Airplay modules are not more than 15 feet distance modem or range Extenders.

  When steaming audio with AirPlay, the flow goes first to the device host to iTunes to the router Wi - Fi, this unit is connected to. From there, he will travel to the AirPlay "speaker". A president could be an AirPort Express, Apple TV or an AirPlay device ready another manufacturer. If you use line extensions, the flow must go through those as well... so there is potential bottlenecks between the host and the speaker. One of these could be the cause of the issue you found.

• My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with option to order and reconstruction, and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with command + option and reconstruction and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  If you recently updated to El Capitan, your version of iPhoto is not compatible with this OS.

  What version of Mac OS X are you running?

• Submit an RSS feed to itunes, but I keep getting a message saying 'cannot submit your feed. There is no description tag in your diet, or the description tag is empty. "Any advice on how to solve this problem?

  Our podcast is released through Libsyn, who confirmed to me that our RSS feed is valid. I talked to two Libsyn and itunes support or knew what it is I do. Thanks a lot for any advice you may have.

  RSS feed: http://enslavedbythebell.libsyn.com/rss

  I went and tweaked your workflow slightly.

  Try to send back you your feed now.

  Rob W

  libsyn

• On March 28, my ipad 2 use osi 9.2.1 air would not allow internet browsing so I updated to 9.3... I always have the same question. Any advice?

  On March 28, my ipad 2 use osi 9.2.1 air would not allow internet browsing so I updated to 9.3... I always have the same question. Any advice?

  Unfortunately, this is a common problem.

  Try turning off JavaScript under settings - Safari - Advanced.

  You can find more information at the link:

  For those having issues with the iOS 9.3 update please read...

  New construction of iOS with the latest bugfixes 9.3 is now available for download

• New Iphone 6s says the latest version of itunes that I have. any advice?

  I'm trying to set up my new 6 s. when it's plugged in it says that he needs the latest version of itunes that I have (11.4). I can't synchronize my computer nor the iCloud. any advice?

  It is not latest version of iTunes he. What version of Mac OS X on your Mac? Most likely, you need to update your OS X in order to install the latest version of iTunes.