Windows Server 2008 for Hyperion Planning

Similar Questions

• How to extend the system partition of Windows server 2008 for free?

  my windows server 2008 r2 system works really slow, I'm extending the system partition. I tried windows built-in disk management, but after releasing the free space disk d: I cant just add for the c: drive, I can not move its position. It's disgusting! then I found a few 3rd party software, but none of them are free, they are more expensive I can afford is there some advice to help me to ~ ~ thank you very much!

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx

  Hope this information is useful.

• AX4 and Windows server 2008 for 3 TB only one Partition

  We need two partitions of 3TO. AX4 and Windows Server 2008 allow that?

  This driver GPT runs stable with partition of size more than 2 TB?

  Virtual disk AX4 may be greater than 2 TB?

  Thank you

  
  

• How to plan the windows Server 2008 for stopping and waking up

  Hello everyone

  I want t set hours that turn on and off the machine during business hours (09:00 to 17:00)

  Could you please let me know how can I do this with windows scheduled task?

  Concerning

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Drivers for Windows Server 2008 R2

  PE1950, 2950 and MD3000i MPIO on Windows Server 2008 R2

  We're trying to nail a few dates to migrate our W2K8 R2 platform and plan the project.  We have most of our technical plans in place, and we have the code.  We have no Dell drivers however and there are several suspicious communications from Dell on this topic...

  Case #1: http://en.community.dell.com/blogs/insideit/archive/2009/08/10/ready-for-the-transition-dell-provides-support-for-windows-server-2008-r2.aspx

  Note:

  • Our engineers have missed on countless piano recitals, songs and episodes of American Idol while spending thousands of hours of testing and validation to make sure that dy products Dell running Windows Server 2008 R2 are the business-rea.
  • We have pilot complete support for Windows Server 2008 R2 for Dell hardware so you can deploy, run and manage easily. You can go here to download the drivers.

  If you view the service labels in our support of similar product groups, you will find an R2 option for servers... but the only public services on the PowerVault MD3000i you don't find any reference to R2 at all.

  Case #2: http://www.delltechcenter.com/page/Supportted+Dell+PowerEdge+Systems+for+Microsoft+Windows+Server+2008+R2+Beta

  This is a list of Beta for PE obviously compatible servers, however it would make sense If Microsoft has included natively the right drivers for the Dell hardware in the distribution of Microsoft R2 RTM so, just can't find any supporting documentation and do not know if the network drivers are compatible with MD3000i.

  #3: There are a few hacks to get drivers Windows 2008 MPIO inherited working with the RC R2 & MD3000i on this forum, but no reference to R2 in the MD3000i matrix and nothing on the site... it's why, we have wondering again where are the good drivers for R2 RTM?

  Can you be it someone from Dell and or this forum please send information on these issues?

  #1: driver compatibility of matrix for Windows Server 2008 R2 running on PE1950 and connected to an MD3000i PE2950 is a supported configuration?  (Code R2 RTM was released to Microsoft volume license customers)

  #2: the network drivers for the host machines included in the support of Windows Server 2008 R2 RTM?  If this is true, are the drivers MPIO for MD3000i and iSCSI Dell other platforms included in the support of Windows Server 2008 R2 RTM as well then?

  #3: If all the answers are not questions #1 and #2... could someone PLEASE contact people of pilot certification on Dell to see if they are same in QA at this point, if they plan to update and display an estimated date of implementation?  We have contacted tech support, but received very vague answers on anything with R2 at this stage.  There is a business directory and a path to escelation for support tickets, but the midrange as this makes it much easier to share information for the masses, we just have not yet found.

  Thanks for your information, comments and your support!

  OptimalState

  I was finally sent to someone who could give me some information on this within Dell, here's what they said:

  PE 1950/2950 drivers:

  The pilot should be included natively in Windows Server 2008 R2 media, and if so, would these drivers would be supported by Dell in a production scenario.

  MD3000i:

  I know that we will not issue a new MDSM which will fund 2008 R2 until sometimes in October. The MD3000i requires MPIO to the MD3000i and Dell drivers driver installation to work properly. I'll see if there is other information that I can find. I understand your frustration and engineer told me that this has been corrected in the next MDSM and MD3000i firmware version in October.

  So, it looks like October before MD3000i will be supported.

  OptimalState

• Definitions for Windows Server 2008

  Hello!
  I was looking for definitions of toshiba for windows server 2008, and then I realized that there are no definitions for windows server 2008.

  So if someone knows how to fix this please let me know.

  You are right. Support Toshiba doesn t Windows Server 2008 and as a result you will not be able to find any Toshiba statement associated with this OS.

• HP Deskjet Adv 2060: Driver for HP Deskjet Adv 2060 for Windows Server 2008 x 64. ?

  Hello

  I have a desktop PC remotely with Windows Server 2008 x 64.

  I tried and still can't get a driver for my HP Deskjet Adv 2060, so I can't print in my house.
  
  May I ask if there is a compatible driver for HP Deskjet Adv 2060 for Windows Server 2008 x 64. ?

  Thank you very much.

  Ryan

  Hey Ryan,

  This kind of low printers end support client operating systems only, it supports all print server OS or Citrix or RDP.

  You can find the printer specifications below, only the operating system on the system Rquiredments are supported:

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-3183-all-in-one-printer-series---K1/4157434/model/4157334/document/c02063036/

  Kind regards

  Shlomi

• HP Pavilion p7-1451 USB 3.0 and Bluetooth drivers for Windows Server 2008 R2

  I bought a HP Pavilion p7-1451 so I might have a machine that is affordable, yet powerful enough to put a server software development environment on (I'm a software engineer).

  It came with Windows 8, but I need Windows Server 2008 R2, I own through an MSDN subscription.  I did what I always do in these cases, re-partioned the hard drive, re-formatted and installed the new operating system.

  I have almost all devices work fine, but it still does not recognize the USB 3.0 ports and Bluetooth device.  I looked everywhere but could not find something that works.  Whatever it either from the HP site is targeted for Windows 7 or 8 and trying one of those, it tells me "your system does not meet the requirements of the operating system" and MSI publishes all the drivers for this particular motherboard (that I can find anyway).

  Motherboard: MSI MS-7778, also known under the name of: MSI 2AEO version 1.0

  BIOS: FRIEND 8.12

  Here is the list of "other devices" in Device Manager that Windows does not recognize:

  BCM20702A0

  (USB) Universal Serial Bus controller

  (USB) Universal Serial Bus controller

  Bluetooth device ID: USB\VID_0A5C & PID_21F1 & REV_0012

  USB Controller device ID: PCI\VEN_1022 & DEV_7812 & SUBSYS_2AE0103C & REV_03

  Windows doesn't always recognize them after allowing him to look on the internet.

  I googled everywhere and I'm not getting anywhere.

  Does anyone have advice?

  Any chance that this could be linked to the BIOS?

  I'm not having any chance to find a BIOS download for this motherboard either.

  Any help is very appreciated!

  Find out!

  Use your expertise in software engineering to mod the driver for USB 3.0 to work...

  Look at the last post on the thread. You need to mod the text file... replace NTamd64.6.1.1 with NTamd64.6.1

  http://forums.AMD.com/game/messageview.cfm?CATID=454 & ThreadID = 163739

• LAN driver for Satellite L505 - 10Z PSLS3E on Windows Server 2008

  Hello world

  We hope to find a solution for my case.

  I have Toshiba Notebook (PSLS3E-L505-10Z) and installed Windows server 2008 on it, but I can't find the driver Lan for this OS. Could guide you please solve me this problem, because I lost a lot of time to research on the toshiba Web site and with no valid result realtek Web site.

  Thank you

  Hello

  Windows Server 2008 is based on a Vista/Win 7 OS.
  It s like the same situation 5 years ago. Win 2003 server was based on Win XP and all the drivers Win XP are compatible with Win 2003 server.

  If you are using Windows Server 2008, then you should try the Vista/Win 7 drivers!

  Good bye

• Qosmio F30 audio driver for Windows Server 2008

  I'm only running a virtual machine with Windows Server 2008 installed. The server sees my Sound Driver, but it does not recognize it and ask for driver all the time. I tried running the installer of Sound Driver from the CD, but it didn't work, said: not supported operating system. I tried a driver all over the web and I found none. Can someone help to find this driver for me or let me know it it is possible to manually install this driver?

  I will be grateful for any help.

  As you probably know that Qosmio F30 is not designed to be used as a server and general support Toshiba doesn t Server2008. All you can do is to identify the manufacturer of the sound card and try to find the driver on its support page.

  Boyfriend sorry but that s all I can say about it.

• 600 g MT: network driver for HP600B MT for Windows Server 2008 64 bit

  I installed Windows Server 2008 on computer HP 600 g MT (product number - B5G17EA). But I'm not able to get the network (Ethernet) and graphics drivers for this OS. I even tried to download and install the drivers for Windows 7 and 8. But that did not help.

  The HP site doesn't have any drivers for this desktop computer operating system:

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5270873&lang=en&cc=us

  Driver search for "Atheros AR8152 / 8158 PCI-E Fast Ethernet Controller (NDIS 6.20) also went in vain I couldn't locate for OS Windows Server 2008 (64-bit)."

  Please help!

  Hi Provost,

  Thanks for the reply. I downloaded the Ethernet drivers from the following link:

  http://www.driverscape.com/download/Atheros-ar8152-8158-PCI-e-fast-Ethernet-controller-%28ndis-6.20%29

  And it worked perfectly for me. I had another system (HP 600 g MT). I went to the Device Manager and checked the name of the Ethernet adapter. It is Atheros AR8152 / 8158 PCI-E Fast Ethernet Controller (NDIS 6.20). Then I googled and found the link above was the driver.

  The graphics driver from the link you provided, I always download it now. Would return as soon as possible about that.

  Best regards

• Office Jet pro 8610: Office Jet pro 8610 for windows server 2008 R2

  I got the new Office Jet pro 8610 prither but does not have the driver for "Windows Server 2008 R2 Enterprise" 64-Bit.

  What to do now. Can you please provide?

  Thanks in advance.

  Hello

  The same driver as expected for any operating system like Windows 7 or 8 must be used, however, the installation should be launched via the command line and not as a standard installation.

  Follow these steps to install the software of the printer on a server:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer/5367603/model/5367606/document/c03351547

  Shlomi

• Drivers for Windows Server 2008 64 bit for HP LaserJet 1020

  I need this driver

  Drivers for Windows Server 2008 64 bit for HP LaserJet 1020

  Thanks, but how do I do to download this archive?

  Best regards!

  Adrian

• Dell Standard ISO for Windows Server 2008 Standard (not R2)

  I need an ISO standard, an ISO of Windows Server 2008 Standard OEM Dell 1-4 CPU. I already have a certificate of authenticity available with the P73-04001 product number. Any help would be appreciated. This isn't a request for pirated software, this is a request for ISO itself so that I can use the certificate of authenticity I brandished in the hand. Any help would be greatly appreciated.

  Contact Dell for ISO OEM.

• Downgrade from Windows Server 2008 R2 Standard for Windows Server 2008 Standard

  How can I make the downgrade of the Windows Server 2008 R2 Standard to Windows Server 2008 Standard?

  I know that the Server 2008 R2 is only x 64, but I need Server 2008 x 86, it's because I need the downgrade.

  Does anyone know the correct procedure to do this, or some e-mail to contact someone from Microsoft that could help me?

  Thanks for help

  Best regards

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/