How to extend the system partition of Windows server 2008 for free?

Similar Questions

• How to install the ssl certificate in windows server 2008?

  Hello

  Can someone give me the steps to install the SSL certificate on my application hosted on windows server 2008 R2?

  Hello

  Although technet.microsoft.com should be the best forum for the problems of server below is a guide on how to install an SSL certificate.

  It will be useful.

  To install your newly acquired in IIS 7 SSL certificate, first copy the file somewhere on the server and then follow these instructions:

  1. Click on the start menu, go to administrativetools and click on Manager of Services Internet (IIS).
  2. Click the server name in the links on the left column. Double-click server certificates.

     

  3. In the Actions column to the right, click Complète Certificate Request...

     

  4. Click on the button with the three points, and then select the server certificate that you received from the certificate authority. If the certificate does not have a .cer file extension, select this option to display all types. Enter a friendly name that you can keep track of certificate on this server. Click OK.

     

  5. If successful, you will see your newly installed in the list certificate. If you receive an error indicating that the request or the private key is not found, make sure that you use the correct certificate and you install it on the same server that you generated the CSR on. If you are sure these two things, you just create a new certificate and reissue or replace the certificate. If you have problems with this, contact your certification authority.

     

  Bind the certificate to a Web site

  1. In the column of links on the left, expand the sites folder, and click the Web site that you want to bind the certificate to click links... in the right column.

     

  2. Click the Add... button.

     

  3. Change the Type to https , and then select the SSL certificate that you just installed. Click OK.

     

  4. You will now see the listed link for port 443. Click close.

     

  Install all the intermediate certificates

  Most of the SSL providers issue certificates of server out of an intermediate certificate so you will need to install the intermediate certificate on the server as well or your visitors will receive a certificate error not approved. You can install each intermediate certificate (sometimes there are more than one) by following these instructions:

  1. Download the intermediate certificate in a folder on the server.
  2. Double-click the certificate to open the certificate information.
  3. At the bottom of the general tab, click the install Certificate button to start the Certificate Import Wizard. Click Next.

     

  4. Select place all certificates in the following store , and then click Browse.

     

  5. Select the Show physical stores checkbox, then expand the Intermediate certificate authorities folder, select the below folder on the Local computer . Click OK. Click Next, and then click Finish to complete the installation of the intermediate certificate.

     

  You may need to restart IIS so that it starts the new certificate to give. You can verify that the certificate is installed correctly by visiting the site in your web browser using https rather than http.

  Links

  • Move or copy an SSL certificate on a Windows Server to another Windows Server
  • How to disable SSL 2.0 in IIS 7
  • How to configure the SSL in IIS 7.0
  • Video tutorials to install an SSL certificate in IIS 7 to NetoMeter

  Kind regards

  Joel

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to transfer the license key from Windows to Mac for adobe photoshop lightroom 5?

  How to transfer the license key from Windows to Mac for adobe photoshop lightroom 5?

  You can download it from this link and post with your serial number. You can run LR5 on both machines.

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5856

• change an active partition in windows server 2008 r2 makes me can't open a windows session and be invited to the compaq recovery system

  Dear all,

  I struggled with this problem for 3 days. I can't connect to windows server 2008 R2 because I accidentally change the active partition of the system partition to another partition whose size is very small (only about 1 GB). When I try to watch through the back, the sequence is all wrong. The previous system partition was becode D c. The other partition which is becoming C f.

  I tried to use startrep to fix this, but the problem remains the same.

  I also try to use bcdedit /? bootsequence, but because I don't know how to see the partition guid, I can't change the bootsequence.

  Can anyone help to open a windows session? Your help is appreciated production. I need it as soon as possible...

  Concerning

  Henry

  Dear all,

  I struggled with this problem for 3 days. I can't connect to windows server 2008 R2 because I accidentally change the active partition of the system partition to another partition whose size is very small (only about 1 GB). When I try to watch through the back, the sequence is all wrong. The previous system partition was becode D c. The other partition which is becoming C f.

  I tried to use startrep to fix this, but the problem remains the same.

  I also try to use bcdedit /? bootsequence, but because I don't know how to see the partition guid, I can't change the bootsequence.

  Can anyone help to open a windows session? Your help is appreciated production. I need it as soon as possible...

  Concerning

  Henry

  Hey henry cs

  These forums are for help on problems with vista

  I suggest that, for the best help repost you in the forums windows server 2008 below

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Walter, the time zone traveller

• How to merge the system partition in the boot?

  So I reinstalled Windows 7 on a computer with 3 separate hard disks. I selected the OS installation as disk 1. However, I can not format disk 0 because it is the system partition. I would like to know two things: How did this happen and what can I combine the partition system so I can format disk 0?

  

  You are in the first sentence says it all, & a reason youre HD mismgmt...

  Firstly, an operating system is installed on a pc, must have only 1 HD installed, the

  others can be connected once the OS is up & running. If you have installed HD 1,

  So how HD 0 would partition operating system on it, unless its sharing between the two.

  who doesn't have a presence... Anyway, to Bishop of size 0 just to open the device, select

  uninstall, closing device Mgr. Prompt, cmd, type: cmd cmd type:

  DiskPart in DiskPart, type: list disk type: volume, you can delete the list

  partitions, format more... Type: HELP for any type or cmds: create partition /?

  as an example...

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• How to add a Device CALs to windows server 2008

  How to add licenses user of windows server 2008 standard Edition?

  You the problem are solved better post on the TechNet forum: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/threads

  J W Stuart: http://www.pagestart.com

• Question relatd to the security settings on WIndows Server 2008

  In my company, we use WindowsServer 2008r, we want to block some specific Web sites for only few users in windows server 2008 r we have clicked on settings of group policy that we did not find the internet explorer, you can suggest me other solution for this problem.

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to get right to downgrade to Windows Server 2008, if I buy window 2012 license

  We need to buy Windows Server 2008 Enterprise X 64 Edition, unfortunately, is not available although wanted to confirm which edition of Windows Server 2012 devrais I buy to get the edition of Windows Server 2008 Enterprise X 64 Edition downgrade but I found the information in your FAQ document, mentioned in Q15 I have to buy Windows Server 2012 Standard for Windows Server 2008 Enterprise

  Q15. If I want to use the bits from a previous version or edition, what are my options?

  If you have Windows Server Datacenter edition 2012, you will have the right to downgrade your bits any earlier version or lower edition. If you have Windows Server 2012 Standard edition, you have the right to downgrade your forests to any previous version of Enterprise, Standard or Essentials editions.

  The ability to execute downgrade bits do not change licensing or support the terms in which you use the product; rights of the purchased product (Windows Server 2012) will apply. This means that the license will continue to wear two physical processors and virtualization of the rights do not change.

  Here are a few examples. License purchased	Downgraded version or edition	ILO rights that apply	License fees that apply
  Data Center 2012	Datacenter 2008	Datacenter 2008	Datacenter 20121
  Standard 2012	Enterprise 2008 R2	Enterprise 2008 R2	20121,2 standard
  Standard 2012	2008 standard	2008 standard	20121,2 standard
  Standard 2012	Essentials 2012	Essentials 2012	20121,2 standard

  Awaiting response ASAP

  Hi Ibrahim has,

  I suggest you according to the question in the TechNet Windows Server 2012 Forum: http://social.technet.microsoft.com/Forums/en-US/winserver8gen/threads

  Thank you.

• Unable to validate a way out of trust on either of the two domains using Windows Server 2008 R2

  I have two domain controllers in the two different forests.  Both have a Stub dns setup for each other and can ping both the field and the name of dc for eachother.  Domain1 build outgoing approval and validate successfully.  Domain2 see confidence applied, however any attempt to validate this trust or build from the Wizard ends with only 2 domain cannot locate the domain controller for Domain1.  What can be done to allow Domain2 validate this trust?

  Hello

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• AX4 and Windows server 2008 for 3 TB only one Partition

  We need two partitions of 3TO. AX4 and Windows Server 2008 allow that?

  This driver GPT runs stable with partition of size more than 2 TB?

  Virtual disk AX4 may be greater than 2 TB?

  Thank you

  
  

• Windows Server 2008 for Hyperion Planning

  Hi, someone tried to deploy Hyperion Planning using the Windows Server 2008 operating system? I understand that it is not currently supported but I just want to check if there are a few companies have tried this option.
  
  Thank you!

  Hello

  I tried to install it on windows server 2008 and I advise to do unless you are going to use it just as a test.
  Firstly, Openldap do not install correctly, missing parts of the registry, it can be fixed by updating the registry.
  Many of the files in the common directory are also not deployed and must be copied manually over the course of a working environment.
  He believes that installation is vista.
  EPMA does not work, the services don't start with a warning against bad operating system in the same Viewer.

  It seems that Oracle have work it cuts to get everything running smoothly by the next version.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• p028tx: my laptop came with 8.1, how to create the recovery partition in windows 10

  My laptop came with windows 8.1 innitialy.

  I had updated my operating system Windows 10.

  Few days back I had to 'restore factory settings' on my pc due to some problems and my pc with windows 8.1 restarted.

  So, how can I creat recovery partition which would recover my pc back to windows 10 with out going back to windows 8.1.

  Please help me as soon as POSSIBLE.

  Thank you for visiting the Forums HP's Support and welcome.
  You can find the frequently asked Questions for Windows upgrade 10

  http://WWW8.HP.com/in/en/Ad/Windows-10/learn-more.html#! & pd1 = 1 & = 1 pd3 pd4 = 1 & pd5 = 1

  Best regards;
  Marcel
  I am an employee of HP
  Please click the White Star Kudos to say thank you for helping.
  Please check accept as Solution if my help has solved your problem.

• How to extend my main partition in Windows 7?

  I have windows 7 installed on my drive C. I have allocated 10 gig space required to install the operating system. After the updates there is not much space left in the drive. I can't expand the space in the partition. Is there anyway that I could do with the relocation of the operating system? I try Norton Partition Magic, but it did not work.

  If you have more than one partition on the hard disk that Windows is installed, you must first "Shrink" the partition immediately after the Windows partition. Windows 'Disk Management' cannot shrink the beginning of a partition (only the end of a partition), so you need a third party utility first reduce, not the Windows partition and then "Extend" the Windows partition in "Unallocated" space created when you narrowed down to the front of the partition Windows no.

  Try Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, delete partition, format partitions to partition, partition resize, Move, score after an accidental deletion, convert partition, partition Explore, Hide partition, change the drive letter, Set active partition, Explorer (content display) of the recovery partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  J W Stuart: http://www.pagestart.com