Windows Server 2008R2 installation - device driver is missing

Similar Questions

• "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. »

  When I try to install window 7 ultimate my Windows vista ultimate, the spectacle of the window the following error message "a required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. "I have the"TSSTcorp CDDVDW TS - L632H ATA Device"CD/DVD-ROM drive, and and it come preinstalled with no driver disk.  So is there a solution to the problem?

  You could try to copy the contents of the DVD to a folder on your hard drive. Then start the installation from there.

  (I've seen a post or two during the upgrade to Windows 7 64 bit of Vista 32 bit). Could just be a funky DVDROM drive problem. Copy of the files should ignore the issue.

  I hope this helps!

  Mark <> Microsoft Partner

• Unable to perform a custom installation of Windows 7. I have an error message "A required CD/DVD drive driver load. Device driver is missing. »

  Can't custom installation (no pilot of the aircraft were found)

  I can not install custom (boot via dvd) for 32 and 64 bit versions.  When I boot from the disc (sometimes starting will not ask to boot from the disc), startup starts normally then it says:

  "Load driver".
  A required CD/DVD drive.  Device driver is missing. »

  Followed by:
  "No device drivers were found.  Make sure that the installation media contains the correct drivers.

  I can install windows 7 32 bit through upgrade, but I want a custom for the 64-bit operating system setup.

  Course record:
  Vista Home Premium 32-bit
  Intel Core 2 Quad Q6600
  3 GB RAM
  Detailed specifications: http://support.gateway.com/s/PC/R/1014739R/1014739Rsp2.shtml

  Tried to install this for a while, any help would be appreciated.

  Perform a custom installation of Windows 7

  With your computer and running of Windows Vista, do one of the following:

  1. If you have a Windows 7 installation disc, insert the disc into your computer. The installation program should start automatically. If it isn't, click on the Start button, click on the computer, open the drive to install Windows 7 on your DVD drive and then double-click setup.exe.

  1. In the page install Windows, click install now.

  2. On the Get updated important for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. Your computer must be connected to the Internet during Windows 7 installation to get these updates.

  3. On the Please read the license terms page, if you agree to the terms of the license, click on I accept the terms of the license and then click Next.

  4. On the type of installation do you want? page, click Custom.

  5. Choose the partition containing Windows Vista (this is often the unit of C) and then click Next. (Do not select your external USB hard drive).

  6. In the Windows .old dialog box, click OK.

  7. Continue to follow the instructions to complete the installation of Windows 7, including naming your computer and set up an initial user account. You can use the same names that you used in Windows Vista, or choose new ones.

  Next: Return your files to your computer and re-install your applications from the original media.

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Impossible to re - install Windows Vista. "A required CD/DVD device driver is missing." appears

  I have the same problem as a previous applicant.  My hard drive went down and I had to replace it with a new one.  Windows Vista is the operating system installed on my HP Pavilion and I try to use reinstall drive.

  The message says "A required CD/DVD device driver is missing.  If you have a driver disk, CD, DVD, or USB flash drive, please insert it now. »

  I don't have a floppy drive on this machine, so I'll have to do the installation from a USB key.

  I tried so that it points to the Installation DVD, but it was still impossible to find the required driver.

  Thank you

  Sean

  Hey Thornwill

  HP machines have some problems with the replacement of their equipment with new hard disks not hp etc. and reinstall vista

  My advice to you would be that you contact hp

  Walter, the time zone traveller

• Relocation of 7 home 64 bit by usb. Windows Setup needs a driver. message reads (a required CD/DVD drive device driver is missing).

  54i have a computer laptop m18x by Mei alineware reinstall 7 home 64 bit by usb. Windows Setup needs a driver. message reads (a required CD/DVD drive device driver is missing.) funny iam not to use a cd or a dvd. IAM using a USB flash drive. weird. If anyone can help.  Thank you wberlin

  Probably the installation media itself is corrupt. If your Alienware is preinstalled with Windows 7, then you should be able to reinstall using the recovery partition:

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  To restore the image while preserving the data files:
  Turn off your computer.1.
  Disconnect all devices connected to the computer (such as USB key, 2 printer and so forth) and remove any recently added hardware in-house. NOTE: Do not unplug the AC adapter cable.
  Turn on your ordinateur.3.
  When the Alienware logo appears, press several times to access the 4. Advanced Boot Options window. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again.
  Select 5. Repair your computer.
  Select 6. AlienRespawn and backup emergency in the System Recovery Options menu and follow the instructions on the screen. NOTE: The restore process may take an hour or more depending on the size of the data to be restored. NOTE: For more information on AlienRespawn, see article 353560 at support.Dell.com knowledge base.

  Source:

  http://support.Dell.com/support/eDOCS/systems/M18x/en/mm/MM_en.PDF

  If the recovery partition does not work:

  Step 1: Download a copy of Windows 7:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

  How to: perform a customized Windows installation

  Step 3:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• New installation of windows server 2008r2 gives me this activation error: 0x8007007B - "the file name, directory name or volume label syntax is incorrect. Can someone help me to activate?

  Windows server 2008r2
  No role
  Dcpromo has NOT been executed
  new installation

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Forums. Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Error ""A required CD/DVD device driver is missing. " If you have a flash drive driver floppy disk, CD, DVD, or USB, please insert it now.

  OriginalTitle:lack drivers

  I change my ubuntu to Windows 7, but "A required CD/DVD device driver is missing. If you have a driver on floppy disk, CD, DVD, or USB flash drive, please insert it now. Note. If the windows installation media is in the drive, you can remove it for this step. "what I can do about it?

  Hello

  Are you able to boot to the Windows Vista operating system?

  Read the following article and see if that helps:

  Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disk:

  http://support.Microsoft.com/kb/952951

• A required cd/dvd drive device driver is missing. Please insert now

  Hello

  I have;

  HP Pavilion dv6 Notebook PC

  Lk960EA #abu

  This is the AMD version.

  My hard drive is dead (clunkcing, and when I joined this office machine, windows cannot load, it is not found in acronis either), so I put a 750 GB sata 2.5 drive replacement in an online store.

  When I try and install window 7 (via a USB, made using windows 7 USB / dvd tool, own iso ditial River) it still produces this message

  "A required cd/dvd drive device driver is missing. If you have a floppy drive, cd, DVD or usb flash drive please insert it now.

  Now, it's not to do with the dvd but actualy need the driver for the SATA controller drive, I checked the download page, but I can't find (the only driver chipset's usb 3.0)

  Now before anyone jumps and said 'just restore', I can't that HP didn't give a CD but rather to put the recoevery on the disk THAT DIED HARD, EXCELLENT WORK.

  Laptop computer comes with software to create your recovery discs & you usually invites shortly after setting up to make the whole. Are you sure you don't to do the game and put away them? Happened.

  Some have solved the problem that you are experiencing now by changing the usb port used.

• With the help of Remote Shell of Linux to run on Windows Server 2008R2 .bat files

  I use rsh to my Linux server to run Windows applications on a Windows 2003 server using .bat files remotely.  For example, from Linux:

  rsh win2008s.enterpisedomain.com D:\\appdev\\atm_ally\\bgr_atm_ally_standard_pip.bat ${PINSTANCE} {IVSWEBBROWSERUSER} ${PPASS} ${DINSTANCE} ${DUSER} ${DPASS}

  I want to be able to rsh to a Windows server 2008R2.  I installed SUA and the SDK and utilities.  I also installed the patch from this link:

  https://support.Microsoft.com/en-us/KB/2360829/en-us

  When I try to run the same command on Win2008R2, I get the following:

  RSH: D:appdevatm_allybgr_atm_ally_standard_pip.bat: not found

  I also tried to change the content of the file bat in the Unix syntax, following the signs to help SUA.  The following text runs if I use rlogin and run interactively, but fails to run using remote shell (rsh):

  #! / bin/ksh
  export PATH=/dev/fs/C/instantclient_12_1:/dev/fs/C/Windows/SUA/bin:/dev/fs/C/Windows/System32:/dev/fs/C/Windows:/dev/fs/C/Windows/System32/wbem:/dev/fs/C/Windows/System32/WindowsPowerShell/v1.0:/dev/fs/C/Program Files/FME2011:/dev/fs/C/Windows/SUA/common:/dev/fs/C/Windows/SUA/usr/lib
  export PATH_WINDOWS=/dev/fs/C/Windows/System32/.com,.exe,.ksh,.bat,.cmd,:/dev/fs/C/Windows/SUA/common/.com,.exe,.ksh,.bat,.cmd
  ' / dev/fs/program/C Files/FME2011/fme.exe ' E:\\appdev\\standard\\standard_pip.fme--BndTab BOUNDARY2015. BND_01_DMA - BndInst DWSTG - BndU atm_ally - edwat56c1 - BndIDCol GEO_ID - BndDType PBED ' VARCHAR2 (25) ' PntTab - V_ATM_JAN15_GEOCODE - PntInst DWSTG - PntU ATM_ALLY - edwat56c1 - PntID ID - PntIDType PntP ' VARCHAR2 (8) ' - PntLat N_LAT - PntLng N_LON - PntLatType "NUMBER (10.6)"-PntLngType "NUMBER (11.6) ' DestTab - ATM_JAN15_DMA - DestInst DWSTG - ATM_ALLY - edwat56c1 - NearDist DestP DestU 0 - Logfile 'test2.log '.

  using rsh:

  rsh win2008s.enterpisedomain.com /dev/fs/E/appdev/atm_ally/test_pip_win.ksh

  remote shell fails with the error:

  ' / dev/fs/C/Program Files/FME2011/fme.exe "no such device

  Anyone have any ideas?

  Your query is better here

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

• What free security programs are best suited to Windows Server 2008R2 running in VirtualBox?

  I installed Windows Server 2008R2 comments in VirtualBox with a host of Windows 7. It is my first experience with servers. As part of the installation and configuration, I want to install a lightweight, reliable and user friendly program. Microsoft Security Essentials would be ideal if it is compatible as I am familiar with MSSE, and as its performance. My research to date is back of contradictory information about MSSE: incompatible, use the version for Vista/7, choose from a list.

  I'm hoping to get a recommendation based on personal experience rather than a list of programs. I went through a list of compatible security programs, but I'm not familiar with most of the programs listed.

  Thanks for your advice...
  MDRP

  Hello

  The question you posted would be better suited in the TechNet Forums because it caters to an audience of it professionals. Your question would be more out there.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Thank you.

• Can I install MS Exchange 2010 in Windows Server 2008R2 Foundation?

  I have a server of Fujitsu TX100S2 with Xeon X 3430 CPU and 4 GB of RAM, running Windows Server 2008R2 Foundation with 5 clients. I need a mail server and want to make sure that this environment will support the installation of Microsoft Exchange Server 2010.

  Hello

  Because the problem is with Windows Server 2008 R2, I recommend you post this question in the TechNet forum.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• ARR in Windows Server 2008r2

  Hello people,

  Is - this Windows Server 2008r2 supports ARR balancing in connection mode the least?

  I'm new to ARR :)

  I have configured windows server 2008r2 with IIS 7 and ARR 3.0.

  When I checked the load balancing methods, is to show only 4 methods

  1 - weighted round robin

  2-Server Hash Variable

  3 query String Hash

  4-application hash

  I went through a few documents where there are several methods are available for load balancing.

  Looking for your valuable support where I'm missing.

  Best regards / Ashish.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• MMC hangs with print server when I try to print a test page for the server. Windows Server 2008R2 Printer HP1606n

  MMC hangs with print server when I try to print a test page for the server.

  Windows Server 2008R2

  Printer HP1606n

  Signature of the problem:
  Problem event name: BEX64
  Application name: mmc.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc808
  Fault Module name: hp1100su.dll
  Fault Module Version: 0.3.1.36655
  Timestamp of Module error: 4dba6516
  Exception offset: 00000000000159bd
  Exception code: c0000409
  Exception data: 0000000000000000
  OS version: 6.1.7601.2.1.0.272.7
  Locale ID: 1033
  Information additional 01:00 c 6
  More information 2: 00c62f6d4134d9a2c3306d7c5b5b94b0
  3 more information: c9eb
  Additional information 4: c9eba0fb841db4dab90b359385c03455

  The module that seems to be the cause of the accident is the hp1100su.dll:

  Fault Module name: hp1100su.dll
  Fault Module Version: 0.3.1.36655

  The hp1100su.dll is a part of the driver for the printer.

  What you could try is uninstalling and reinstalling the driver of printer using the version of HP.

  I believe that the following may be the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110410

• my icons have all changed to DPIsnt icons and don't launch, they give me just the Wizard installation device driver, how to solve this?

  my icons have all changed to DPIsnt icons and don't launch, they give me just the Wizard installation device driver, how to solve this? It won't let me continue with the wizard, I tried to launch a game through this program (the game needs a program to help him run and stupidly, I thought it was the right one) now each icon has changed and I can't access anything chrome atm, im a novice on computers so a guide idiots to solve this would be much appreciated Thank you very much

  Hello

  Did you make any changes before the show?

  Method 1: Run a virus scan to make sure that the computer is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Icons change incorrectly in Windows

  http://support.Microsoft.com/kb/2396571
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows.

  Method 3: When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows.

  Let us know if that helps.