Satego: After 2.30 - bios update the fan operating even in economy mode

Similar Questions

• How many times can I install Windows 7 on your PC even after I continue to update the hard drive SSD for a bigger?

  How many times can I install windows 7 on your PC even after I continue to update the hard drive SSD for a bigger? Unlimited?

  Mike

  There is no limit.

• an outlook Express account can be restored after a clean boot from the XP operating system

  an outlook Express account can be restored after a clean boot from the XP operating system

  If you set up from scratch.

• "Most Visited" is missing on personal bar and I can do this by using the suggested corrections, even in safe mode. What should I do?

  "Most Visited" is missing on personal bar and I can do this by using the suggested corrections, even in safe mode. What should I do?

  You didn't say what you tried. This link shows how to restore - https://support.mozilla.com/kb/Restore+the+default+Smart+Bookmarks+Folders

• The fans started later after 3.10 BIOS updated on Satellite L30 - 134

  Hello
  Please, so prompt correctly I think?
  Look at me is Toshiba L30-134.

  Today, I have loaded the new BIOS version for this portable goal - 3, 10 - WIN and she put in place instead of preceding.
  During the installation, everything happened perfectly, but after installation I discovered, that the threshold of cooler working temperature has changed!

  Now cooler began to be launched to the realization by the processor of the temperature of heating from 63 to 67 degrees and with cooler previous BIOS worked at 58 degrees!

  If it is unsafe for the processor? Or and was designed also Toshiba engineers have specifically changed a temperature threshold in the new BIOS version?

  P.S. I bring an apology for my disgusting English language. It is not my native language :-)

  Don t worry and don't worry my friend ;)
  The temperature of my CPU on non-Toshiba notebook is also about 67-70 ° C and everything works great for years!

  Greetings

• Satellite L750-A218 - fan run faster after 3.30 BIOS update

  Hello

  Here's a new show, I have am experiencing after the BIOS update.

  In my view, that the internal fans turn all the time by placing my hands near the keyboard. According to Toshiba software fan speed is 50% + while I do nothing. On the other hand, it is 25% before the update.

  They are updating the BIOS to give the laptop more ventilation or something.
  It's weird. CPU temperature is 45%. I upgraded from 3,00 to 3.30, for your information. Thank you.

  P.S. The speed of the fan is stuck at 50% + and wont go lower than that.

  What bothers me the most is that when I put my hands on the part at rest I feel the vibrations of the fans. I use the keyboard a lot and it is a huge nuisance. Is it possible to get the old BIOS, the BIOS updated not did me not a backup option. Also, I don't have a problem with the voice of fan (s). Its low.

  Edit: Just downgraded to 3.10. Its the same thing. Couldn't find the 3.00 version, I've had anywhere. It's frustrating.

• Flashed to update BIOS, now the fan is not working?

  I have a HP DV6226US and I have recently updated the BIOS to version F.2D. I am running vista 32 os. It is the version that is given for my computer model on the site of HP software and drivers. When I ran the update, I remember saying that he check the compatibility before the BIOS flash.

  Here's my question...

  Before the lightning used to fan run constantly with clearly different degrees of RPM. After the flash, the fan does not seem at all turns. It turned on once when I restarted the computer (right before you start loading vista). Other that that, I can not here one thing. However, I used HD Tune and a CPU monitor very simple to see what kind of weather the internal parts are running in. My HARD drive (WD 7200 RPM 320 GB Scorpio black) is running at constant c from 46 to 47. In the manufactures specifications, even under the 200 + GB scans loaded on it. The processor cores appear to be good inside factory card as well. I was wondering if anyone else has experienced this change in behavior of the fan due to the update of the BIOS, and if I should be concerned by the apparently lack of fan activity. I use this laptop for DJ and karaoke at intervals of 4 to 5 hours about 5 days a week and demand that it is not overheating. Can anyone shed some light on this. Thanks in advance.

  OK, since no one answered I came up with my own solution. So for anyone who did a search and comes up with this post, this is what how I solved my problem.

  I went back to the software HP and downloads page and read all versions of the BIOS updates. I found myself flashing version e.16 for several reasons.

  • It is close to the original version of the F.14 (who does not appear in the BIOS versions).
  • Other versions have been fixes for the problems that I had not lived with my laptop (HP DV6226us with a 30BB motherboard Quanta and processor Intel T2250)
  • E.16 added support for processors Intel Celeron M (which is not important in my application) and improves the performance of the system with a thermal function to update the CPU.

  Before the downgrade of F.2D to e.16, such as mentioned in previous posts, the CPU cores were running at a distance of 35 ° c - 55 ° c +. Not out of reach, but warmer than usual. The temperature of the HARD drive has been ranging from 42 ° c - 61. 61 was reached in the execution of an analysis, and it is out of the Max Temp. Beach of the HARD disk that is 60 ° c. During my DJ/KJ shows the disk HARD temp. would more 53ºC - 58ºC and usually take around with a small fluctuation 54ºC. To me this seemed very high from what I was used to in the past before updating the BIOS F.2D.

  Since the downgrade to e.16, my CPU temp. has varied between 0 ° c - 35 ° c and is usually at 20 ° c. The HARD drive has retreated down to 42 ° c - 45 ° c. During my DJ/KJ show the temp. Hit 44ºC and constant which took place. It is a huge improvement. The fan works just like in the past and is not blowing hot super air when it works.

  Fixed a problem! Hope this helps someone else who is facing a similar problem.

• Option of switchable Graphics Mode not found in BIOS on the dv6-6026TX, even after the sp54024 update

  After the update to sp54024 and goes to bios f10, in the configuration of the system, I can't find an option that allows me to change the switchable graphics mode. The only options are something on virtualization, leaving the fan on etc, but nothing graphic...

  I'm portable is a dv6-6026tx.

  FYI, the option to change from dynamic to fixed option is available on laptops with Switchable Dynamic graphics. Your computer laptop dv6-6026TX has fixed Switchable graphics, and that is why you are not able to find this option in the BIOS.

  You can read more info here

  http://support.HP.com/us-en/document/c02731962

  The possibility to change the dynamics Fixed in BIOS update applies only to the 6100 dv6 and dv7-6100 Series Notebooks.

• Satellite A60-202 after bad BIOS updated the PC does not work

  Hello

  After a very bad my BIOS update, my PC doesn't work and doesn't turn on.
  What to do now?
  It is Toshiba Satellite A60-202 with 512 MB of memory and 40 GB of HD.
  model PSA60E-OLP06TFR SA60-202

  Thank you

  Yves

  HI Yves,

  Unfortunately, if the BIOS update procedure does not work (or fill), then it is likely that the BIOS in the CMOS chip had been corrupt and without it, you will not be able to boot your laptop to fix the problem.

  It will be necessary to bring (or send) your laptop to a repairer authorized to have reflashed BIOS.

  Kind regards

• Satego X 200 - 20O - BIOS update error code 200

  Hello

  I tried to update my mother's cell phone (Satego X 200 - 20o) with the latest BIOS (2, 70 - WIN), but it comes back with the error code - 200. (It's now a computer portable 64-bit Windows 7)
  What does the code error - 200?

  Thank you

  Hi Urdypooh_1,

  Why do you update the BIOS? You have problems with the laptop?

• Satellite A100-289: after 5.1 Bios Update powerfault on usb device

  Hey, I have trouble after you install the Bios Version 5.1 on a Satellite A100-289.

  First: there is NO external USB device connected!
  After the awakening of the laptop Sleepmode , I received a message in Windows XP the a power fault has been detected on one of the USB devices. A dialog box opens and I can "reset" the device.

  This only happens after that the laptop is awake in sleepmode, perhaps to Hibernate, but not when the laptop starts. It seems that everything works well, but this post makes me nervous.

  Can someone tell me, what is going in this box?

  What about Mirko

  Hello

  5.1 BIOS was designed for Vista but it should (or it works) also with XP!

  However, you could try updating the BIOS with the other BIOS version that is operating system independent
  or / and you can try to disable the power save option for USB ports in Device Manager.

• Satellite C660 - Freez after boot - corrupt BIOS update 1.7

  The Satellite C660 had start-up problems: freezing screen after startup and very, very slow. Also a HARD drive recovery did not help.

  I tried an update of the Bios and loaded the downloadable file that at Toshiba (version 1.7). The Bios update has not completed and now the laptop does not at all.

  The warranty is void, I now buy a chip of bios in China and I'm looking for now the bios file.

  It's all them very disappointing and a large size of time and money.

  > The Bios update has not completed and now the laptop does not at all.
  That s it Plains really looks like the module ROM was not properly flashed.
  I think it's a problem with the hardware, since you had problems before the update of the BIOS.
  I think that affected the procedure for updating the BIOS.

  > As the warranty is cancelled, I now buy a chip of bios in China and I'm now looking for the bios file.
  Forget it mate ROM module cannot be replaced in most cases the module ROM must be flashed with a disc of crisis

  Would recommend asking a Toshiba ASP for help and reflash the BIOS using the disc of the crisis.
  This should not be very expensive

  By the way: have you seen this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54395

• Satellite A200 - BIOS update and fan activity

  Hello..

  I have the Satellite A200-1AH (PSAE6E). I have installed the version of the BIOS 2.10 update and electric fans started working out loud. I want to install v1.30 BIOS (the best for me) but I can't find it anywhere. Can you help me please?

  I noticed that Toshiba has updated versions of BIOS 4 times in 4 months. So does that mean? I want to have the mobile rear silencer

  I guess the Toshiba engineers have changed some values in the new BIOS update and thereby you have noticed this problem of fan. I think they have a few reasons for this.

  If you want to have the old version of the BIOS, you should try to contact authorized service provider in your country. They should have.

• After that Ms last update the task manager has changed

  After that the last MS updated, the task manager has changed. I used for the right click at the bottom of the screen, select Task Manager & get 3 or 4? options to select.

  Those I used gave me a chart of the use of Internet + speed info; now, I only get the list of processes, no option & the only way out is to TAP (DO NOT TOUCH!) the ESC key.

  Is this another feature of MS or make me a form of bribery? JV

  Sorry, but I don't really know what the problem is here. In any case, try to roll back OS to an earlier time using System Restore tool. Choose the time prior to installation of update from Ms. Everything should be as it was before.

• Satellite L650-16w: BIOS 2.40 fan does not start standby mode after

  I have the toshiba Satellite L650-16w
  the version of the bios is 2.40

  I have a problem: when turning on the pc, the fan speed is still 90%, whatever the pc, and if the computer goes into sleep mode the fan stops and does not restart and I got the message: 'problem with the cooling system, turn to pc immediately '.

  I had this problem also when I got the 2.2 bios, when I upgraded to 2.40 for a few weeks, everything was normal and now the problem again.

  You set the default BIOS?
  Make sure in the BIOS, press F9 and then save the changes by pressing F10.