Windows Server 2012 R2 Standard - devices and printers tab crashes, does not properly

Similar Questions

• Win 7 Prof 64 bit, devices and printers Control Panel does not load

  When I try to open the devices and printer Panel, it opens initially but shows not all devices. The status bar at the top slips slowly into overall but never reaches the end to load completely. I've uninstalled and reinstalled the latest version of all my printer drivers (using the manufactures installation routines. Research in various forums talk about start/stop the bluetooth services, but none of this helps.

  I created another user account and when I connect it, devices and printers opens OK.

  I could live with that if it wasn't for the fact that I can't disconnect safely from my drive external hard usb. When I right click on the icon "safely remove hardware and eject Media" on my task bar the only option I have is 'Open devices and printers' and then I'm back to my original problem. The list of the menu I receive when I right click on the drive in WIndows Exploxer does not include a choice of ejection (it does for a flash drive, but not my hard drive).
  (I have a laptop with Win 7 64 bit installed and it shows devices connected when I right click on the icon "safely remove...) »).

  I tried to turn off nonMicrosoft al and restart services but still having the same problem. In the past, I had run CCleaner to clean the registry (no, I did not indicate a restore point) and I saw on a forum how that could have created the problem. I have since deleted CCleaner

  I use Avast Antivirus, Windows firewall, SnagIt and Cobian backup. Short of re - install Win 7 (please, no) or by creating a new user and all displacement there (not even sure how to do this) is anyone know how to fix this? Or at least how I can safely disconnect my drive hard usb without messing up his data?

  Then as indicated, the user profile is corrupted

• Windows Server 2012 R2 Standard Radius Client support

  Hi team,

  In 2012 R2, the NPS Service server used for authentication. It uses the Radius Clients as authenticator. There is no online documents about the number of clients supported by the Windows Server 2012 R2 Standard Edition and Datacenter. Might well want to mention the number of clients supported by the version

  Thank you

  Sudhakar

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Original title: licenses

  Hello

  I installed Windows server 2012 standard R2 and for Windows server 2012 ROK Standard license 2CPU/VM.

  Windows has not activated this license.

  Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Thanks in advance!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Windows 7 freezes for the right click devices and printers don't is not loading

  I support for a local photography studio and built all of their computers. One of their photo editing machines faced some weird problems I can't solve.

  It is currently running Windows 7 Ultimate 64 bit. About two months ago the mainly the user complained that a right-click on a folder or a file on the desktop would cause the computer to freeze. She also noted that devices and printers would not have been responsible. We finally just did a clean install of Windows, and that seemed to fix the problem...

  .. .for a while.

  About two weeks, the same two problems returned, now it is intermittent. The user declares every morning, she has him restart the computer several times, but then everything works very well for the rest of the day. But while it comes in the next morning, and it does the same thing.

  I tried manually reset the BIOs, turn on Bluetooth Services (even if that computer does not all bluetooth devices) and play with Windows registry a bit, but because the problem is not compliant, it is very difficult to solve.

  I don't know if it's a hardware or a Windows problem. All the tracks would be greatly appreciated!

  Check the report viewer for all errors that occur.

  Clean boot the PC and redo the test

  Run a memory test and a test HD

• Devices and printers don't is not loading

  I spent a ton of time to solve this problem. I mean I followed every forum thread, including the Bluetooth service, got the Windows patch that works not etc. Here's what happens:

  1. in the services there that the Services of the Bluetooth Support - now started auto value. I understand there should be also Bluetooth Service that one is missing. I followed a thread that suggested registry check if Bluetooth is there and yes it is.

  2. I played with spooler service stop / start on cmd. When the spooler is stopped, I can see devices and printers and all in this window. But then I can't print, add printers or other devices :(

  3. I ran into the cmd file check sfc/scannow - all files, check and good.

  4. has obtained the fix for this problem here: http://support.microsoft.com/kb/2486635?wa=wsignin1.0 not good either

  I can print when connected directly to USB but cannot print to network printers. Also can not see all of the computers in the homegroup. Can get on the internet wireless or wired OK.

  Is there someone who can help you?

  Hello

  System Restore can return programs and system files from your PC to a time when everything was working well. This will not affect your documents, images or other data.

  Perform the System Restore to an earlier date and check if it works.

  System restore

  Good day!

• Windows Server 2008 R2 Standard 32-bit blue screen Crash

  Hello

  Our company used a Windows Server 2008 Standard 32-bit R2 as a database server and the Web server at the end of 2009. It was working fine until recently. In the last 6 months, we do experience error blue screen and system crash. It happens at random may be once or twice a day or it just doesn't happen at all for 2 or 3 weeks.
  The last blue screen was on 14 September at about 7:30, I take the Memory.Dmp with Windbg and here is the content file:
  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.
  Loading dump file [C:\Windows\MEMORY. DMP]
  The core dump file summary: the single kernel address space is available
  Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols;srv * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (2 processors) free x 86 compatible
  Product: Server, suite: TerminalServer
  By: 6002.18484.x86fre.vistasp2_gdr.110617 - 0336
  Computer name:
  Kernel base = 0x81a1d000 PsLoadedModuleList = 0x81b34c70
  The debugging session: Wed Sept 14 07:32:17.377 2011 (UTC - 04:00)
  System Uptime: 0 days 10:37:36.088
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ........
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  Use! analyze - v to obtain detailed debugging information.
  BugCheck D1, {10, 5, 0, 8bf70422}
  ERROR: Module load completed but symbols can be loaded for aarahci.sys
  ERROR: Module load completed but symbols can be loaded for intelppm.sys
  Probably caused by: aarahci.sys (aarahci + 3d 422)
  Follow-up: MachineOwner
  ---------
  0: kd >
  ! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: 00000010, referenced memory
  Arg2: 00000005, IRQL
  Arg3: 00000000, value 0 = read operation, 1 = write operation
  Arg4: 8bf70422, address memory
  Debugging information:
  ------------------
  READ_ADDRESS: 00000010
  CURRENT_IRQL: 5
  FAULTING_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0XD1
  Nom_processus: System
  TRAP_FRAME: 81b12b10-(.trap 0xffffffff81b12b10)
  ErrCode = 00000000
  EAX = 00000000 ebx = 8e209038 ecx = 00000007 edx = 00000080 esi = 8e203bdc edi = 79000010
  EIP = 8bf70422 esp = 81b12b84 ebp = 81b12bc0 iopl = 0 nv up ei pl zr pe nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010246
  aarahci + 0x3d422:
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h] ds:0023:00000010 is?
  Reset the default scope
  LAST_CONTROL_TRANSFER: from 8bf70422 to 81a6afd9
  STACK_TEXT:
  81b12b10 8bf70422 badb0d00 84c67c38 00000080 nt! KiTrap0E + 0x2e1
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  81b12bc0 8bf70899 8e209038 84a2a458 84a2a360 aarahci + 0x3d422
  81b12bdc 8bf70c96 8e203bdc 00000002 00000006 aarahci + 0x3d899
  81b12bf0 8bf673b2 8e203bdc 81b12c14 8bf3b32e aarahci + 0x3dc96
  81b12bfc 8bf3b32e 8e203bdc 84a11a30 84a11ae8 aarahci + 0x343b2
  81b12c14 8bf37d81 00a2a08c 81b12c38 8bf860b4 aarahci + 0x832e
  81b12c20 8bf860b4 84a2a004 849dd784 849dd780 aarahci + 0x4d81
  81b12c38 81 has 63970 849dd780 84a11a30 81ddaf6b SCSIPORT! ScsiPortInterrupt + 0x2a
  81b12c64 81a638e9 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch2ndLvl + 0 x 44
  81b12c64 8c3d1406 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch + 0 x 29
  81b12cf8 81acdcd4 84c59cb8 85278ac0 00000000 intelppm + 0 x 1406
  81b12d50 0000000e 81ac5861 00000000 00000000 nt! PoIdle + 0x2d1
  0000000e 81b12d54 00000000 00000000 00000000 nt
  ! KiIdleLoop + 0xd
  STACK_COMMAND: kb
  FOLLOWUP_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  SYMBOL_STACK_INDEX: 1
  SYMBOL_NAME: aarahci + 3d 422
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: aarahci
  Nom_image: aarahci.sys
  DEBUG_FLR_IMAGE_TIMESTAMP: 48920ae4
  FAILURE_BUCKET_ID: 0xD1_aarahci + 3d 422
  BUCKET_ID: 0xD1_aarahci + 3d 422
  Follow-up: MachineOwner
  ---------
  -----------------------------------------------------------
  I check the server system property and I see that we use ADAPTEC Serial ATA RAID host as storage next to Microsoft iCSCI and ADAPTEC RAID SCSI Disk Device 500 GB HD controller initiator.
  I also see that ADAPTEC Serial ATA RAID host uses aarahci.sys as a pilot, I check the driver, it's the most recent driver.
  My question is the same as I understand that there is something wrong with the driver, but I don't know what really happened. Maybe the driver is not good, the disc has fault or we do not have enough memory (our server has only 4 GB of RAM and memory load is still > 80%, sometimes it reached 96% and current Page File is 4265 MB)
  Can someone help me to point out what exactly happens with the error above?
   
  That means CURRENT_IRQL: 5?
  and what it means: DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  Thanks a lot for your help.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Cannot "turn on media streaming" - another user of Windows 7 with the same problem and the "suggested correction '' does not.

  This windows bug has been reported and 'responded' before by several people, but the "answers" do not work for me - and they do seem to work for a lot of people in this area and other forums.  I hope you can provide me with a real estate diagnosis, a reason for why this happens and a real solution that works for everyone.

  I'm trying to 'Turn on media streaming' in Windows Media Player so I can listen to my xbox and other home theater equipment.  The problem I have is the same problem as [of] other people have reported: in Windows Media Player, I press the turn on the 'link', the button greys streamin media shortly, but then nothing, and streaming is not enabled.

  I don't have a network problem.  I was able to extend Microsoft Media Center on my xbox.  (simply not enable streaming in WMP).  With media center extended is a large (better) workaround for the xbox, but this isn't a solution for my other home theater devices. I need to be able to listen to my receiver and blu - ray player, as I have done on my old PC running Windows XP.

  I have a fresh install of Windows 7 Pro, x-64 on a new machine of self-building.  Everything else works, it is not the machine.  I installed all the latest drivers for my machine.  I have all the updates for Windows 7.  I run the Windows Firewall and Kaspersky Anti Virus 2010.  I installed Microsoft Office 2007, Outlook 2007, Visio 2010 and many other applications 'standard '.  I'm not under any program of low-level "weird."

  As other people "suggested", already tried the action of the outgoing WMP, stop the Windows Media Player Network Sharing Service using service.msc, then by removing the .wmdb (and other files but not directories) by my dirctory users/xxx/AppData/Local/Microsoft/Media Player, restart the Service of network share WMP using services.msc and then restarting WMP.  This had no effect.  (I tried several times with and without having to restart WMP network sharing service manually.)  I tried to change the Windows Media Player Network Sharing Service, tab log (the default on my system) Network Service to Local System with "allow service to interact with desktop" chosen as someone another "suggested".  This does not seem to do anything.  I also tried to uninstall WMP and WMC player (using "turn Windows has or disable"), restart, then adding them and reboot.  This time this icon "turn media sharing on" returned in WMP (the icon is usually party WMP Stream/turn on media sharing window).  This time Windows 7 Pro thought a little longer before doing nothing.  (However, now I get a message error "an error has occurred. Not all features have been changed successfully. "in an attempt to"Reinstall"Windows Media Center after you have reinstalled WMP.)  The resettlement of WMC has returned an error.  I can no longer start Windows Media Center on my PC.

  So, by all posts on this topic, its obvious this is a real bug in Windows 7 (maybe?), (perhaps only on x - 64?).

  Just two more things on my setup... I did not initially set up homegroup (because I have no other Windows 7 machines), but I tried that implemented to see if it had an effect (it didn't).  The part only 'weird' of my installation, I mounted my D: drive (2nd hard drive) in C:\Users (because I use a Solid State Drive for the operating system on C: and don't want the user data on this subject).  This has not caused other problems, but I wanted to throw it out there in case Windows Media Player sharing is something weird here.  (And no, I'm not going to 'try to change' that, unless it is a known fact that that's the problem - and then I would need a different solution to move my user data off the coast of the SSD.)

  So please, let me know what is the real problem why it happened to me (I'm sure some people can turn on streaming in WMP), and what is the real solution.  (There seems to be a multitude of suggestions on the web for all kinds of different 'fixed', but which, if any, is the right one?)  Please do not just suggest things to try.  What is the right benchmark?

  Go to network and sharing center open view full map, right click on your PC and click on manage.

  then open services and applications, and then serivces and find Upnp device host, right click and click on reboot and make sure that it is set to automatic.

  Now scroll down to Windows Media Player Network Sharing service, do a right click and click on reboot and make sure that it is set to automatic also.

  It should work, it worked for me and everyone I know but... The only problem I have is when I restart my PC, the drive share Windows Media network service changes from automatic to automatic (delayed start) and I have to restart again the Upnp device host and Windows Media Player network sharing service.

  Other than having to do every time I restart my PC, it works perfectly.

  Also, if anyone has an idea of why it changes (delayed start) let me know thanks...

• Adobe Design Standard CS6 and Flash Pro CS6 does not open

  Our client received error messages as attached below after opening a program.

  They tried to reinstalled the software, but the problem persists.

  

  
  

  OS: Windows XP Professional (Service Pack 3.0) 32-bit

  CPU: Intel Core 2 Duo CPU [email protected]

  Hard drive: 250 GB

  RAM: 4GB

  What should I do to solve the problem?

  Hello

  Does not blink works when you install the latest Adobe Application Manager?

  Is - this Illustrator works, when you try to run it as an administrator?

  Kind regards

  Anand

• I just updated Firefox and now it crashes, does not not tabs or add-ons, and the user interface is all messed up.

  I was power off update of Firefox for a while because I knew some of my modules aren't compatible yet, and the main reason I use firefox is because of the multitude of modules. Finally today I decided to go and let it install. As soon as he returns to the top, it's completely different from the way I had my firefox. The buttons are all moved around, each tab has two Xs to close with the back button does not work, there is no way to scroll more tags do not take on the screen and for some reason the firefox button is not collapse in the main beam.

  My session has not been restored, either, which really annoyed me, because I had a very high volume of open tabs. Right now I just want to come back, because I hate what happened, but I know that's not possible.

  I'm sorry to hear that you have so many questions. What version of Firefox you used before?

  The problem of double title bar has been identified as a problem with the extension of the tax Mix Plus but it does not affect everyone, there is an interaction with something else (not exactly what clear although Norton Toolbar has been mentioned in a thread).

  There is a new version available that you can try. If Firefox is stable enough to do...

  Firefox orange (or the Tools menu) button > Add ons > ' gear' icon > check updates

  If your beta version does not update, you can try to install from the Add-ons site.

  More generally, can I suggest disabling the extensions as much as you can live without for 24 hours and gradually reactivate? This should help isolate the interactions between them. As you know, you can do so here:

  Firefox orange (or the Tools menu) button > addons > Extensions category

  Finally, about your old session, if you have not closed Firefox, you could find a sessionstore.bak file in your profile folder that contains your old session. For easy access to this file, try

  Help > troubleshooting information > "view file" button.

  Grab a copy of this file and save it somewhere outside the folder because it is overwritten when you close Firefox. Had to run, but if find you one with a suitable date, a person can help you to restore.

• Answers - analysis and Interactive tab appearing does not in responses

  Hello
  
  Recently, I installed 11.1.5.0 OBIEE. I am able to connect to the services fine presentation.
  
  But I don't see the analysis and Interactive tab when I click on New. All I see is 1. 2 published reports. Actionable Intelligence.
  
  I don't see a place where I can choose my business. I'm missing something here.
  
  Any help would be greatly appreciated.
  
  Thank you!
  Anand

  Hello

  I hope that your currently logged in user has the role of BIConsumer. If you want to do the analysis you must have a role BIAuthor or BIAdministrator card if your current users in this role, then it will work.

  Just go to Weblogic EM (FMW)--> application of the roles--> change here...

  THnaks
  Deva

• Windows Server 2003 r2 64-bit Remote Desktop RDP connection does not

  Hello

  I went through most of the support guides I can find on the internet and nothing seems to work.

  I enabled and disabled the service. Enabled and disabled Internet connection sharing. I totally disabled the firewall on the server and I can not always connect to the server via RDP

  I only get an error message.

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  When should I wear analysis server there is no enabled 3389 port. I am using RDP just for administrative purposes. I used to connect to the machine via RDP but one day it just stopped working.

  I also checked a few updates selection to determine if they are installed. All updates that might have compatibility problems are not installed on the server.

  Any request for information will be answered promptly.

  Thanks in advance.

  Hello

  Please post your apparent in the following link for assistance with problems of desktop connection remotely:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverTS

  I hope this helps.

• Windows Vista has transformed the landscape and Ctrl + alt + arrow does not help us

  Looks like a shortcut key turned on the side windows vista and when I try to press ctrl + alt + arrow to turn common sense will not work.  I hope someone can help.

  Joanna

  Press Ctrl & Alt keys and use the arrows to rotate back.

  According to the graphics card on your computer, these can be alternatives.

  Right click on the desktop | Graphics options | Rotation.

  Right click on the desktop | Screen resolution | Orientation.

• Guides and preference of grid does not properly in Illustrator CC 2015?

  I have my preferences set for the guides show as dots, but they show only that the solid lines. I can change the color in the preferences, so I know they work at least a little, but all the old files that I opened, and dragging new guides guides does appear as solid lines, even if the preference is marked by dotted lines. Everyone knows this, of course, quite minor problem?

  Solution:

  Turn off the power GPU Performance in preferences. Guides (and other things) suddenly work as expected.

  Wait for the patches of Adobe Illustrator and try again.

• Devices and printers

  When I open devices and printers needless devices and printers, but it does not open. The green progress bar goes all the way and nothing happens. Help

  Hi Savage,

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Post us the results once you try the steps above.