Windows Server 2012R2 KMS Activation Key - do not increase

Similar Questions

• Clean install of Windows 7 but the activation key does not work

  Hello, enter a new installation of Windows 7, the first OS on a new construction of the mine.

  The problem I have is that the activation key will not work, the problem would be
  I use a Windows 7 (updated for Win Vista)? Or do I need a new
  product key?
  Thank you
  Eric

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------

• Error: 0XC004F050 Windows Vista Home Basic product key is not valid for activation

  I bought this dell laptop 2 years. my laptop is to sometimes have blue error screen, but when I restart it, allows it to function normally. recently, when I turn on my laptop, my screen goes black and a box come up saying that the Windows Vista Home Basic product key you typed is invalid for activation.
  

  Then he gives me 3 options
  1. access your computer with reduced functionality
  2. enter a different product key
  3. contact Microsoft to help solve this problem

  I was trying to enter the product key as indicated on the sticker attached to the bottom of my laptop but still invalid product key. Code: 0XC004F050

  I had

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation status: invalid license

  Validation code: 50

  Validation caching Code online: n/a, hr = 0xc004f012

  Windows product key: *-* - 4WD8X - M9WM7-CH4CG

  The Windows Product Key hash: EkdqJZ28Y9zyrh7DU/lHNjTXlQY =

  Windows product ID: 89572-OEM-7332166-00096

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.0.6001.2.00010300.1.0.002

  ID: {B353C367-9E97-407C-A335-269CB0707324} (3)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows Vista (TM) Home Basic

  Architecture: 0x00000000

  Build lab: 6001.vistasp1_gdr.100608 - 0458

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: 6.0.6002.16398

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0x80004005

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Caching the result: 103

  Version: 2.0.48.0

  OGAExec.exe signed by: Microsoft

  OGAAddin.dll signed by: Microsoft

  OGA data-->

  Office status: 103 blocked VLK

  Microsoft Office Enterprise 2007 - 103 blocked VLK

  OGA Version: Registered, 2.0.48.0

  Signed by: Microsoft

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Users\Tien Siew\AppData\Local\Google\Chrome\Application\chrome.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {B353C367-9E97-407C-A335-269CB0707324}1.9.0027.06.0.6001.2.00010300.1.0.002x 32*-*-*-*-CH4CG89572-OEM-7332166-000962S-1-5-21-2878899211-3288161655-3842348923Dell Inc.. Inspiron 1420 Dell Inc.. A07 20080203000000.000000 + 00034303507018400EA04090409peninsula malaise Standard Time(GMT+08:00)03DELL M08 103103Microsoft Office Enterprise 200712fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066-6588114 ACD7202654E586

  Content Spsys.log: 0 x 80070002

  License data-->

  C:\Windows\system32\slmgr.vbs(1635, 9) (null): 0xC004E017

  Windows Activation Technologies-->

  N/A

  --> HWID data

  Current HWID of Hash: PAAAAAEABwABAAEAAQABAAAAAwABAAEAnJ80kiKfGtPqTSSWoFyuf/yQRoPeS1K88vTm9 + 9aSGmsViqF

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0 x 20000

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value ValueOEMTableID

  REFERENCE DELL M08 APIC

  FACP DELL M08

  HPET DELL M08

  STARTING DELL M08

  Original title: my windows vista Home Basic product key is not valid for activation

  MCFG DELL M08

  M08 DELL SLIC

  SSDT PmRefCpuPm

  How can I solve the problem? Thank you.

  Run the Diagnostics of Genuine tool at this link http://go.microsoft.com/fwlink/?linkid=52012.

  Hi steph_ts,

  In addition to the suggestion of Andre.Ziegler, following links and check

  1. you remember to make changes to the computer before this problem?

  You can consult the following KB articles and try the suggested methods for error: 0XC004F050

  How to troubleshoot the error codes Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers

  http://support.Microsoft.com/kb/938450

  Error message when you try to activate a copy of Windows using the Windows Activation Wizard: "the Software Licensing Service reported that the product key is not valid: 0xC004F050.

  http://support.Microsoft.com/kb/950756

  Also see the following link for more information about reduced functionality mode:

  Error message when you start Windows Vista: "your activation period has expired".

  http://support.Microsoft.com/kb/925616/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Trial of ISO Windows Server 2012R2 not start

  I downloaded Windows Server 2012R2 trial ISO file - named 9600.17050.WINBLUE_REFRESH.140317 - 1640_X64FRE_SERVER_EVAL_EN-US-IR3_SSS_X64FREE_EN-US_DV9. ISO.

  After burning by 12 Nero (and even Windows 8 image burning tool), I had only a README file. TXT file on the DVD disc,

  with the content of the text:

  This disc contains a "UDF" file system and requires an operating system
  This specification of the system supports the ISO-13346 "UDF" file.

  I tried first to boot from this drive to install Windows server 2012 R2, but I got the error message:

  Cannot find the BOOTMGR

  How can I solve this problem?

  Kind regards

  Zvi

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Very slow to load on a Windows Server 2012R2 PowerCLI

  Hi all

  PowerCLI 5.5 is very slow to load on my Windows 2012R2 server, I did a few tests

  Test 1 - load the snap of PS on my worstation (8.1 for Windows 64-bit - SATA hard drive)

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 1

  Milliseconds: 871

  Ticks: 18717065

  TotalDays: 2.16632696759259E - 05

  TotalHours: 0.000519918472222222

  TotalMinutes: 0.0311951083333333

  TotalSeconds: 1.8717065

  TotalMilliseconds: 1871.7065

  Test 2 - snap of PS of load on a 2012R2 Windows Server not connected to the internet, check on CRL

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 51

  Milliseconds: 603

  Ticks: 516030768

  TotalDays: 0.000597257833333333

  TotalHours: 0.014334188

  TotalMinutes: 0.86005128

  TotalSeconds: 51.6030768

  TotalMilliseconds: 51603.0768

  
  

  
  Test 3 - support software component PS plug-in on a Windows Server 2012R2 not connected to the internet, check CRL disabled

  PS C:\Windows\system32 > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 16

  Milliseconds: 323

  Ticks: 163238507

  TotalDays: 0.000188933457175926

  TotalHours: 0.00453440297222222

  TotalMinutes: 0.272064178333333

  TotalSeconds: 16.3238507

  TotalMilliseconds: 16323.8507

  As you can see there is an improvement when I disable CRL checking in accordance with this article: http://blogs.vmware.com/PowerCLI/2010/01/troubleshooting-slow-startup-with-powercli-40-u1.html

  But I still have 16 seconds to load the snap against 1 second on my workstation (which has much less computer resources!)

  Any help is appreciated.

  Hi LucD,

  I've found a workaround:

  When I run the import-PSSnapin I noticed (with wireshark) a lot of traffic failed to WAN addresses, so I set myself, in Internet Options a false proxy (127.0.0.1), excluding the proxy DNS of my domain active directory name (so I can connect to the virtual center without going through the wrong proxy)

  Now is the time of execution:

  Windows PowerShell

  Copyright (C) 2013 Microsoft Corporation. All rights reserved.

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 2

  Milliseconds: 774

  Ticks: 27745259

  TotalDays: 3.2112568287037E - 05

  TotalHours: 0.000770701638888889

  TotalMinutes: 0.0462420983333333

  TotalSeconds: 2.7745259

  TotalMilliseconds: 2774.5259

  Not bad! Execution time lowered 16 sec at 2.8 sec

• Windows Server 2012R2 Task Manager

  We have a question about the Task Manager in Windows Server 2012R2.

  We have a client running on a Terminal Server, they want to use the Task Manager to kill a task that is not responding.

  By default, only the user can see all taks running, also other users.

  Is there a way to partially block it? Perhaps in a GPO?

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Please do not hesitate to contact us if you have other questions related to Windows.

• I reinstalled Windows 7, but the product key is not accepted. Message says that the product key is upgraded only, not for the new installation. What should I do now?

  I have re installed windows7 and product activation key is not accepted. Message says key is valid only for the upgrade. What should I do now?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• My computer crashed at Mid-setting level and now my activation key does not work

  I was upgrading from Windows 8 for Windows 8 Pro and my computer is off (power cable disconnected accidentally pass my office).  After it restarts, I went to continue the upgrade, but now my activation key does not work!

  What should I do?

  Hello

  Thanks for the reply.

  (1) how many times have you tried to activate the same key?

  (2) where you bought the product key from?

  See the link below:

  How to contact a Microsoft Product Activation Center by phone

  http://support.Microsoft.com/kb/950929/en-us

  Let us know if that helps.

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• HP Officejet 7500 has compatibility with Windows Server 2012R2

  Dear team,

  I would like to know if the HP Officejet 7500 a is compatible with Windows Server 2012R2 since there is no drivers for this OS.

  Thank you

  Mega-Support,

  Thanks for posting.

  Under Windows, you can connect a printer to a computer via USB and be able to print. However, since there is no software for it on the HP site it's all what you can. Unfortunately, you will only be able to print using the USB method.

• I bought a pc used with windows 7, however, the product key is not valid. I would like to get Windows 8. What would be my best course of action?

  I bought a pc used with windows 7, however, the product key is not valid. I would like to get Windows 8. What would be my best course of action?

  In my opinion your best course of action would be to buy and clean, install a license of system builders.

  You never know what comes with a pirate windows.

• Windows 2008 R2 server, Customization Wizard & activation keys

  We are using ESX 4 u1 and deploying a lot of windows 2008 R2 VM

  I created a model and a Customization Wizard customization file and everything seems to work except the license key. When the VM boots, I find the server are not enabled and the license key box is disabled - I provide the same license key that I put in the Customization Wizard and enroll the server manually without problem.

  Is this correct?  -J' saw a few items that indicate the changes MS made to the activation of the ways windows 2008, you must manually enable each virtual machine that you create from a template.

  Is it possible to automate this process for the virtual machine is activated as part of the initial configuration of a model.

  I'm currently going through the same thing... The only thing I met, was that:

  http://briandesmond.com/blog/how-to-Sysprep-in-Windows-Server-2008-R2-and-Windows-7/

  «If you expect to need to generalize the computer more than one»

  many times, you can specify that the Windows Software Licensing Rearm

  program to be ignored:

  1. set the Microsoft-Windows-Security-SPP\SkipRearm unattended installation

  set value to 1. This option specifies that the computer will not

  reset, and it will not be restored to its original, out-of-box state.

  All licensing and registry data related to activation will remain and will be

  do not be reset. Similarly, any period of grace-timers are not reset. »

  Now, this talking abot deploying from a platform WAIK... one of the people said that it did in its VMware implemented and "it worked great"... but I don't really know if he spoke the WAIK lab vm system or the model of VMWare itself.  I now try the SkipRearm setting 1 and the conversion to the template... then test will deploy from there.  I activated the virtual machine is already using my MSDN key (this will be in my lab).  I hope that during Sysprep running, it leaves the active system.

  The key in question is: HKLM\Software\Microsoft\WindowsNT\CurrentVersion\SoftwareProtectionPlatform and HKLM\Software\Wow6432NodeMicrosoft\WindowsNT\CurrentVersion\SoftwareProtectionPlatform.

  I changed the two entries of SkipRearm DWord to 1... We'll see what happens.

• I had to reinstall the operating system on the computer of my cousin... Windows Vista Home Premium and now the activation key does not work... Message is already key indicators

  the computer in question is anAcer Aspire 4720Z activation key is: * Remove *.

  Hello dandy175,

  This is perfectly normal. Using just the telephone option to activate.

  See this link from my Web site: http://vistasupport.mvps.org/product_key_already_in_use.htm

  Either way, edit your message and remove the key data product until someone steals! Never enter the details key product or email addresses in the messages of the forum. It's for your own safety.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Error of activation 0xC004C003 for Windows Server 2008 R2 Standard key: "the activation server determined the specified product key is in use".

  I installed Windows Server 2008 R2 Standard as a test version of an iso download got on the product site in Ms. In the meantime, I bought the software. Once the software has been delivered, I tried to activate with the key provided me with the software sent from Microsoft. I get... "the activation server determined that the specified product key is used" and throws the error asOxC004C003code. What gives here? They just sent me the key? I need to get this fixed as soon as POSSIBLE.

  Here is the Vista Forums.

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  They will help you in the above Forums Windows Server 2008.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Here's what that means for Vista:

  http://support.Microsoft.com/kb/951287/en-us

  0xC004C003 error code

  The activation server determined that the specific product key is in use.

  This error code indicates that the product key you entered has already been activated, and you have to get a different product key.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 8 activation key does not work

  I buyed a Windows 8 in a store and I installed in a laptop to test... It was instaled in this computer for a few months... After that I reinstalled all the original settings in the laptop and the drive has been formatted and everihing has been deleted. Now I have a new pc and I want to use the copy of Windows 8, I have buyed but system reports, that the activation key is still active... 0xC004C008 error code... How can it be if the Windows which is installed in the pc now is the Windows 7... The key should work now... I think... Can someone help me solve the problem? Thanks for the Attention.

  Hello

  If Windows 8 is a retail license, this should help you:

  When you call, you may need to take for a real person explain your situation to.

  "How to activate Windows 8 and 8.1 telephone"

  http://www.eightforums.com/tutorials/24636-activate-Windows-8-phone.html

  «Get help with activation errors»

  http://Windows.Microsoft.com/en-us/Windows-8/activation-errors

  'How to activate a Microsoft product using Microsoft Product Activation Center'

  http://support.Microsoft.com/kb/950929/en-us

  See you soon