Windows Setup is showing the problem.

I can't install / uninstall any application. His shows, I am running windows in safe mode or my windows install is not properly installed. I not sure on windows using the windows install is installed correctly and it does not require update. Please help me with this problem.

Hello Gerard - v chraibi,

Thank you for the question!

I'm sorry to know that have problems you with Windows Installer. As I understand well you can't install or uninstall applications.

Perform the steps in the link and check.

http://support.Microsoft.com/kb/822798

Answer to us if you are having problems with Applications or any other problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

Good day!

Hope this information helps.

Tags: Windows

Similar Questions

  • FX6831-03 will not be able to start Windows. Just shows the gateway splash screen, then freezes

    My Gateway FX6831-03 will not be able to start Windows.  Just shows the gateway splash screen, then freezes.  OS is updated to current MS Win7-64 bit-w/all and virus/malware protection., Went over 4 days vacation, and when I tried to turn it on, it should display the gateway splash screen, then stop. can't hear anything that happens on the inside.

    Problem solved!  An external hard drive, powered by a separate power supply, was not turned on, but it was plugged into a USB port. When the computer "seen" this cross-town 'dead', he just stop - but no message appears problem.

    The good part?  Vaced out all the dust and replace the bios battery.  [I'm good for at least another 2 years;-]

  • trying to update my windows but it shows the found error Code 80070017

    I'm trying to update my windows but it shows the found error Code 80070017, I installed Microsoft fixit center to solve the problem, but the problem persists, in addition to this Windows Secuirty Center service is off please guide me how to do?

    Hello

    1. what day you're talking about?

    2. what Microsoft fixit you talking?

    3. don't you make changes to the computer before the show?

    Please follow the steps from the link below.

    http://support.Microsoft.com/kb/956704

  • How to fix windows photo viewer showing the class not regitered error in the local system.

    Dear all,

    Please provide me the solution.

    How to fix windows photo viewer showing the class not regitered error in the local system.

    Thank you best regards &,.

    Amol.

    Hello Amol,

    Were there any changes made on the computer before the show?

    The problem may occur if there is a problem with Java on the computer. I suggest you to check the link and try to update Java:

    http://www.Java.com/en/download/help/download_options.XML

    http://www.Java.com/en/download/index.jsp

    Let us know the results.

  • How do you get the beta version of windows 7 to solve the problem created when the auto update 0x0000c1f5 ran?

    How do you get the beta version of windows 7 to solve the problem of stop 0x0000c1f5 windows vista home edition created when the automatic update ran?

    Previous discussions about the error: ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I am connected but the network properties window does not show the size of the packets to all the

    I am connected but the network properties window does not show the size of the packets to all the

    Hi asaimas,

    You can follow this link & check if it helps:

    Configure the Option of configuring server network packet size

    Hope the helps of information.

  • ATI driver uninstalled and obtaining a black page says he needs the windows disc to fix the problem.

    Original title: Windows Vista Home Premium with upgrade

    I tried to update my ATI driver, and it got uninstalled. Now windows will not open. Black page says he needs the windows disc to fix the problem. The drive came with my computer. Download driver somewhere?                                                                                                                                                                         I am running windows Vista Home Premium with upgrade.

    Thanks Gene

    Hello Gene,

    You can try to perform a startup repair and see if it helps. You can check if your system has the integrated system recovery option to perform the Startup Repair. You can check in the advanced boot option to see if you have an option to fix the computer to perform the Startup Repair.

    You can read the following article to get started in the advanced boot options.

    Startup options (including safe mode)

    If this isn't the case, you have a Vista installation disk to perform the same.

    For more information, you can consult the following articles:

    What are the system recovery options in Windows Vista?

    Startup Repair: frequently asked questions

    Hope this information is useful.

  • Windows Photo Viewer shows the files blank JPEG thumbnails (inside folders) poster white icon, already tried a lot of Solutions - please help! S.O.S.

    Dear all,

    I have this problem:

    All JPEG files are normal, I tried to open with the help of Adobe Photoshop CS5. But if I use it to watch my files, it takes too long to load.

    This is the case if I try to open them using the Windows Photo Viewer:

    It's when I try to open it with Adobe Photoshop CS5:

    So the file is fine, they are non-empty JPEG.

    The difficulties I've tried before posting on the forum:

    - Fix it with Microsoft to photo viewer

    Fix It for animals works well and could not find any problem though, so nothing is fixed.

    - Removal 'External event AMD' Service

    Nothing change

    - Removal of color for the monitor profiles

    Nothing to change also

    - Updated all the drivers and windows

    Nothing change

    - Boot in Safe Mode

    The thumbnails are displayed correctly and "Windows Photo Viewer" display my images perfectly well BUT...

    - Start in Normal Mode with all the Services of persons with disabilities (except Microsoft)

    The problem happens again, that the thumbnails are blank and the images also.

    - Cleaning disc (with checked "thumbnails")

    The problem still exists

    - Set programs "Default" for the Windows Photo Viewer

    The problem still exists

    - Run SFC/scannow From The Command Line

    The problem still exists, and the SFC somehow told me that my Windows is fine

    - Removal of hidden miniature manual

    The problem still exists

    - Windows Live Essentials installation and use the 'Photo Gallery'

    Photo Gallery crashes all the time after asking if I want to associate files "JXR" or not, but I'm not on this topic, but this does not solve the problem.

    I tried every step, I have found on various types of forum, but not the last magic: Reinstall Windows, I really want to solve this problem without cleaning Windows installation if possible, and I'm so in love with "Windows Photo Viewer" because it's simple, fast, and it is very precious to me. I tried free viewer and FastStone Image Viewer but is a bit complicated, controls are small and it always comes out in full screen, I need this so baaad.

    My computer is:

    A10-7800 Kaveri AMD processor

    RAM 8GB Corsair Vengeance DDR3 black

    Western Digital 1 TB Caviar Black hard drive

    Motherboard ASRock FM2A88X +.

    Power supply Corsair VS550

    OS: Windows 7 64-bit

    Thanks in advance :) I really want this wrong, please...

    Dear Ramesh,

    I thank very you much for your time to help me, after tumbling around with other solutions, windows finished in "the RPC server is blahblah" thing a bit, then I reinstalled everything from the ground up and the problem disappeared... I don't know what happened to the previous window, I am now using the same drivers, same software, except perhaps the earlier had too many junks (I think this is the classic problem with windows, after sometimes he collected too and begins to act dumb)

    It seems that the problem came, neither windows nor the drivers... But too bad it should remain as an "Unsolved Mystery": P

    Anyway thanks, see again you and Merry Christmas and happy new year to you

  • Impossible to update DirectX, error: please visit DXError.log and DirectX.log in your windows folder to determine the problem

    Original title: Directx problems

    I have a computer of Windows 8 and im trying to run a game on steam. Whenever I do it says that I need a Directx says update when I try to install it. AN internal system error has occurred please see DXError.log and DirectX.log in your windows folder to determine the problem. I watched up I don't have much sense of him here, it is

    --------------------
    [11/10/14 09:20:27] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

    Sections are not initialized.

    --------------------
    [11/10/14 09:20:27] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

    CDXWSetup::InitInstallEngine() failed.

    --------------------
    [11/10/14 09:22:25] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

    Sections are not initialized.

    --------------------
    [11/10/14 09:22:25] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

    CDXWSetup::InitInstallEngine() failed.

    --------------------
    [11/10/14 09:41:52] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

    Sections are not initialized.

    --------------------
    [11/10/14 09:41:52] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

    CDXWSetup::InitInstallEngine() failed.

    --------------------
    [11/10/14 09:49:16] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

    Sections are not initialized.

    --------------------
    [11/10/14 09:49:16] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

    CDXWSetup::InitInstallEngine() failed.

    --------------------
    [11/10/14 10:04:23] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

    Sections are not initialized.

    --------------------
    [11/10/14 10:04:23] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

    CDXWSetup::InitInstallEngine() failed.

    --------------------
    [28-10-14 19:04:26] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

    Sections are not initialized.

    --------------------
    [28-10-14 19:04:26] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

    CDXWSetup::InitInstallEngine() failed.

    --------------------
    [28-10-14 19:59:23] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

    Sections are not initialized.

    --------------------
    [28-10-14 19:59:23] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

    CDXWSetup::InitInstallEngine() failed.

    Thank you

    Hello Peta,

    Thanks for posting your question on the Microsoft Community forum.

    According to the description, I understand that you are not able to install DirectX and get error message: internal system error has occurred please see DXError.log and DirectX.log in your windows folder to determine the problem

    In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

    1. You did changes to the computer before this problem?

    2. Since how long you are having this problem?

    3. The game you are trying to launch in the system?

    I suggest you follow the methods and check if it solves the problem.

    Method 1:

    Click on item below and follow the instructions to install DirectX.

    How to install the latest version of DirectX

    https://support.Microsoft.com/kb/179113?WA=wsignin1.0

    If the problem persists, please follow method 2

    Method 2:

    How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

    https://support.Microsoft.com/kb/929833?WA=wsignin1.0

    Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

    You can also check out the link below.

    Diagnosing basic problems with DirectX

    http://Windows.Microsoft.com/en-us/Windows-8/diagnosing-basic-problems-with-DirectX

    Please answer back with an update on if it solves your problem.

    Thank you.

  • Problem with the mixer Volume of Windows: no longer shows the green bars for the application

    Hi all!
    Sorry for my bad English, but it is not my mother language: s
    I have a PC with Windows Vista Ultimate SP2 x 32 with this issue: the volume mixer show me the green bar (indicating the volume level) for the speakers and not for other applications like windows media player, for example.
    Perhaps this screen explains more: http://img11.imageshack.us/img11/4538/immaginevfo.jpg
    I hope someone can help me (if someone understands how I speak English: S)

    Thanks, TheDarkTrainer

    Hi TheDarkTrainer,

    Thanks for posting your question on the Forums of Windows Vista.

    I need more information to help you better.

    1. What is the brand and model of the card its installed on the computer?

    2 - is the first time you encounter the problem?

    For single channel sound cards, you will only be able to see the green bar for Master Volume control and not for other applications such as Windows Media Player.

    Controls on other applications are given to control the volume of the special request regarding the Master Volume control.

    For example, if you scroll the bar to set the Master Volume to 100% and then play a music file in Windows Media Player. You can try to open the mixer Volume and increase/decrease the volume for Windows Media Player, you will notice that the master control will set the green bar accordingly and don't let not the green bar to cross the bar of the Windows Media Player.

    If you disable the control Volume for Windows Media Player, it will automatically make the green bar will disappear from the Master Volume control.

    However, if you have several applications running on the machine at the same time and using the sound card, you can try to change the levels on different controls to see the effect.

    With several cards his channel as sound blasters, it would be possible to see the green bar on individual applications also.

    Hope the information will help. Please post back and we do know

    Thank you & best regards
    Ashish Gupta - Microsoft Support

    ===================================
    Calm sea never make skillful sailors!

  • NXP media edition Windows; Windows Setup closes during the installation of Image resize Powertoy. Why?

    There is a Microsoft Viewer on my PC (Vista) to work with an image resizer.  I need that on Windows XP at home that I do not abuse my employer time and equipment.  Picture of Windows with faxes on XP does not offer a resizing of the image.

    However, Microsoft offers a free Windows XP Image resize Powertoy.

    I downloaded it from the website of Microsoft and, to each Setup attempt, it closes with the message "Windows® Installer has encountered a problem and needs to close."  We are sorry for the inconvenience! »

    Why?  How is it that a tool of Windows XP is not compatible with Windows Installer?  I have a report on the notebook, but for some reason, there is no way to fix here.

    Can someone please help?

    Will be golden

    Hi, WillGolden,

    You can go to skydrive and download your report here.  Then come back here with a link to the report.

    Open command prompt window

    Type the following command

    SFC/scannow

    Note: There is a space between sfc and / scannow

    Press enter

    The scan will take a few moments.

    Open run and type %windir%\Logs\CBS

    Press Ok

    Browse the crawl log for the System File Checker cannot fix and note the files that cannot be repaired

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    ( http://support.microsoft.com/kb/929833/en-uk)

    Then, open the command prompt window

    Type CHKDSK /F /R

    Press enter

    You will receive a message about the volume must be locked.  You want to monitor during the recovery?

    Press y and press enter

    Restart the computer

    This analysis will take a few minutes.

    What computer restarted, open the event viewer > Windows Logs > Application

    Look for the Winninet consult the results of the analysis

    Start > type Services.msc

    Press enter

    Scroll down and right-click on Windows Installer

    Select Properties

    Under Startup Type, make sure it is set to manual

    Services nearby

    Boot mode safe to reregister Windows Installer

    Open race

    Type the following command:

    msiexec/regserver

    Press Ok

    Note For 64-bit operating systems, you must also register the 64-bit MSI installer again. To do this, click Start, click run, type the following line, and then click OK:

    : \windows\syswow64 msiexec/regserver

    Restart Windows

  • Windows Setup cannot reset the deployment engine. To install windows, restart the installation.

    Background: I bought a new 1.5 TB Seagate Baracuda disk to replace my current 500 GB drive.

    Symptoms: I removed the old drive and installed the new drive.  I try to install Vista 32.  I have spend entering setup, past the disk partitioning key, then get up at installation windows... never goes beyond 0% and this error pops up.  It's a never-ending cycle.

    Information on PC:
    HP Pavilion Media Center
    Model: M8100n
    RAM: 3 GB
    Processor: AMD Athlon 64 2.8 GHz
    Chipset: GeForce 6150SE nForce 430
    Motherboard: ECS MCP61PM-HM (HP/Compaq name: Nettle2-GL8E)

    What I've done so far:
    Update the BIOS & chipset drivers.
    Using the same drive, I can install windows XP without problems.
    Using the same player can I clone my existing to the new player (while it really works, I want a clean install and not a copy of the disc I have with it is that existing space)
    Once I have clone the new drive I can do a fresh install of Vista from above (even once is not ideal and just wasting disk space)

    The problem is that I can't delete all existing partitions, format my new drive and install Vista 32.

     

    Problem is solved.  I don't have a chance to check the compatibility of the reader, but I found a solution that worked.  It turns out that the problem seems to have been a problem of formatting the drive via the Vista CD.  It's very frustrating when you get an error which is not defined anywhere, especially, a mistake by Microsoft that they document on their support pages.

    Anyway, I would not normally copy / paste an answer, but it's the solution that worked for me that I found on another forum (thanks Mak)

    Download GParted.

    http://sourceforge.NET/project/mirror_picker.php?height=350&width=300&group_id=115843&use_mirror=superb-East&filename=gparted-LiveCD-0.3.3-0.ISO

    Download and burn the ISO with ImgBurn:

    http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

    From there load GParted with the CD in your taskbar. It is a bootable CD. From there, select the partition that you want to install to. right click on the partition and you will see the format option. Choose the NTFS option and format the drive. Then restart with the Vista DVD in the status bar.

    Go through the startup process. It should work now.

    The problem you are experiencing is related to the format. Vista does not have a formatting full it made just a short where it erases the data. The problem is that you have a damaged area on the hard drive that is causing this problem.

    This will get rid of spot and allow installation to complete.

  • An internal system error has occurred. Please see DXerror.log and directx.log in your windows folder to determine the problem.

    I just want to play a game that requires the directx version, but I can't install it successfully. These are the logs

    DXerror

    --------------------
    [12/10/14 13:37:23] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\Windows\system32\DirectX\WebSetup\Aug2006_xinput_x64.cab. The file is possibly corrupted.

    --------------------
    [12/10/14 13:37:23] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [12/10/14 13:37:23] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [12/10/14 13:41:58] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\Windows\system32\DirectX\WebSetup\Aug2006_XACT_x64.cab. The file is possibly corrupted.

    --------------------
    [12/10/14 13:41:58] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [12/10/14 13:41:58] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [12/10/14 14:32:17] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 5725, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\PROGRA~2\ACTIVI~1\CALLOF~1\Redist\DirectX\Oct2006_XACT_x64.cab. The file is possibly corrupted.

    --------------------
    [12/10/14 14:32:17] module: dsetup32 (Jun 2 2010), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [12/10/14 14:32:17] module: dsetup32 (Jun 2 2010), file: setup.cpp, line: 1723, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [12/10/14 14:48:49] module: dxupdate (Mar 30 2011), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse E:\NEWFOL~1\Dec2006_d3dx10_00_x64.cab. The file is possibly corrupted.

    --------------------
    [12/10/14 14:48:49] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [12/10/14 14:48:49] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [12/10/14 15:08:05] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 5725, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\PROGRA~2\ACTIVI~1\CALLOF~1\Redist\DirectX\Apr2007_d3dx9_33_x64.cab. The file is possibly corrupted.

    --------------------
    [12/10/14 15:08:05] module: dsetup32 (Jun 2 2010), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [12/10/14 15:08:05] module: dsetup32 (Jun 2 2010), file: setup.cpp, line: 1723, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [12/10/14 15:08:06] module: dsetup32 (Jun 2 2010), file: dsinline.h, line: 302, function: DXRemoveFile

    Cannot delete C:\Users\SHOBHIN\AppData\Local\Temp\DX981.tmp.

    --------------------
    [12/10/14 15:08:06] module: dsetup32 (Jun 2 2010), file: inline.h, line: 220, function: CleanUpDirectory

    Cannot delete: C:\Users\SHOBHIN\AppData\Local\Temp\DX981.tmp\infinst.exe that is locked, reason = 5.

    --------------------
    [12/10/14 15:35:40] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\Windows\system32\DirectX\WebSetup\Jun2007_d3dx10_34_x64.cab. The file is possibly corrupted.

    --------------------
    [12/10/14 15:35:40] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [12/10/14 15:35:40] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [12/10/14 15:35:41] module: dsetup32 (Mar 30 2011), file: dsinline.h, line: 302, function: DXRemoveFile

    Cannot delete C:\Users\SHOBHIN\AppData\Local\Temp\DXAB8B.tmp.

    --------------------
    [12/10/14 15:35:41] module: dsetup32 (Mar 30 2011), file: inline.h, line: 331, function: CleanUpDirectory

    Cannot delete: C:\Users\SHOBHIN\AppData\Local\Temp\DXAB8B.tmp\infinst.exe that is locked, reason = 5.

    --------------------
    [12/10/14 15:37:57] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 5725, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\PROGRA~2\ACTIVI~1\CALLOF~1\Redist\DirectX\Aug2007_d3dx10_35_x64.cab. The file is possibly corrupted.

    --------------------
    [12/10/14 15:37:57] module: dsetup32 (Jun 2 2010), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [12/10/14 15:37:57] module: dsetup32 (Jun 2 2010), file: setup.cpp, line: 1723, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [12/10/14 15:47:22] module: dxupdate (Mar 30 2011), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse E:\NEWFOL~1\Nov2007_d3dx10_36_x64.cab. The file is possibly corrupted.

    --------------------
    [12/10/14 15:47:22] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [12/10/14 15:47:22] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [12/10/14 15:47:23] module: dsetup32 (Mar 30 2011), file: dsinline.h, line: 302, function: DXRemoveFile

    Cannot delete C:\Users\SHOBHIN\AppData\Local\Temp\DX64DA.tmp.

    --------------------
    [12/10/14 15:47:23] module: dsetup32 (Mar 30 2011), file: inline.h, line: 331, function: CleanUpDirectory

    Cannot delete: C:\Users\SHOBHIN\AppData\Local\Temp\DX64DA.tmp\infinst.exe that is locked, reason = 5.

    --------------------
    [12-10-14 16:35:01] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\Windows\system32\DirectX\WebSetup\Mar2008_d3dx10_37_x64.cab. The file is possibly corrupted.

    --------------------
    [12-10-14 16:35:02] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [12-10-14 16:35:02] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [12-10-14 16:35:03] module: dsetup32 (Mar 30 2011), file: dsinline.h, line: 302, function: DXRemoveFile

    Cannot delete C:\Users\SHOBHIN\AppData\Local\Temp\DX1FE0.tmp.

    --------------------
    [12-10-14 16:35:03] module: dsetup32 (Mar 30 2011), file: inline.h, line: 331, function: CleanUpDirectory

    Cannot delete: C:\Users\SHOBHIN\AppData\Local\Temp\DX1FE0.tmp\infinst.exe that is locked, reason = 5.

    --------------------
    [12/10/14 17:17:01] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\Windows\system32\DirectX\WebSetup\Nov2007_X3DAudio_x64.cab. The file is possibly corrupted.

    --------------------
    [12/10/14 17:17:01] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [12/10/14 17:17:01] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    I am also having this problem.

    I built a new PC and installed Farcry 4 on a cleaning/charge of windows installation. He has not previously installed directx. Installing Farcry 4 mentioned that he was installing directx, however it was very short and im not sure if that actually worked. Anyway, when you try to run the game I got an error on D3DCompiler.DLL having disappeared. Research it's turned out to be a directx error.

    All attempts to update directx (in administrator mode) both using the web Setup program, download files locally, on the album, every single method directx Setup fails with the return to "internal an error" has occurred and to return to the running log file. mine is similar to the above, and it seems that (even when you use the web installer) log file looking for the CD, however, the issue appears to lie with this being "mapped using session" open, please refer to the newspaper below. Please help us?

    Thank you

    --------------------
    [26-11-14 23:12:05] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 5725, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse R:\Support\Software\DirectX\Apr2005_d3dx9_25_x64.cab. The file is possibly corrupted.

    --------------------
    [26-11-14 23:12:05] module: dsetup32 (Jun 2 2010), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [26-11-14 23:12:05] module: dsetup32 (Jun 2 2010), file: setup.cpp, line: 1723, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [26-11-14 23:56:30] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\Windows\system32\DirectX\WebSetup\Jun2005_d3dx9_26_x64.cab. The file is possibly corrupted.

    --------------------
    [26-11-14 23:56:30] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [26-11-14 23:56:30] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [27/11/14 00:12:34] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\Windows\system32\DirectX\WebSetup\Aug2005_d3dx9_27_x64.cab. The file is possibly corrupted.

    --------------------
    [27/11/14 00:12:34] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [27/11/14 00:12:34] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [27/11/14 00:15:01] module: dxupdate (Mar 30 2011), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\Users\Mike\Contacts\Dec2005_d3dx9_28_x64.cab. The file is possibly corrupted.

    --------------------
    [27/11/14 00:15:01] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [27/11/14 00:15:01] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [27/11/14 00:15:52] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\Windows\system32\DirectX\WebSetup\Feb2006_d3dx9_29_x64.cab. The file is possibly corrupted.

    --------------------
    [27/11/14 00:15:52] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [27/11/14 00:15:52] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [27/11/14 00:25:57] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\Windows\system32\DirectX\WebSetup\Feb2006_XACT_x64.cab. The file is possibly corrupted.

    --------------------
    [27/11/14 00:25:57] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [27/11/14 00:25:57] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [27/11/14 00:29:36] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 5725, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse R:\Support\Software\DirectX\Aug2006_xinput_x64.cab. The file is possibly corrupted.

    --------------------
    [27/11/14 00:29:36] module: dsetup32 (Jun 2 2010), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [27/11/14 00:29:36] module: dsetup32 (Jun 2 2010), file: setup.cpp, line: 1723, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

    --------------------
    [27/11/14 00:30:52] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn

    Has no API: SetupIterateCabinet()
    Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.

    Impossible to browse C:\Windows\system32\DirectX\WebSetup\Aug2006_XACT_x64.cab. The file is possibly corrupted.

    --------------------
    [27/11/14 00:30:52] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

    DirectXUpdateInstallPlugIn() failed.

    --------------------
    [27/11/14 00:30:52] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

    InstallPlugIn() failed.

  • Windows Media Player shows the library ghost

    I am running Windows 7 64 bit. I deleted everything in my music library, but Windows Media Player shows that I have several albums there. When I try to play songs, WMP says that they aren't there. When I try to delete them, nothing happens.

    Something seems to have gotten corrupted, but I have no idea how to solve this problem.

    You can erase the Media Player library altogether by the removal of the database

    Output Media Player

    Run services.msc and stop the Windows Media Player Network Sharing Service

    In the box start the search menu, enter %LOCALAPPDATA%\Microsoft , and delete the folder Media Player.

    Open Windows Media Player and it will recreate the database from scratch, so you will get the computer search for media files dialogue.

  • Windows Media Center showing the gray screen (no picture but sound OK)

    Hi everyone, I had a problem with Windows Media Center for several weeks now: when I try to watch television, either recorded or live (from my tuner), WMC shows a square white gray but audio works fine. Trying to open the .wtv files in WMP has similar problems - presenting a black screen but with complete audio. Other files video (I tried .avi and .wmv) still work correctly. WMC was playing TV files without a problem until one day, it just stopped working. There wasn't that no updates not installed that startup and the system has been installed costs less than a week before the problem started.

    After spending a whole week looking for solutions online, there seem to be many people who have had this problem, but all have been fixed by different methods, and none of them seem to work here. I will list what I tried: installation and reinstallation of different codec packs, reinstall the WMC, uninstall and then reinstall all the Turners and the graphics drivers, setting the parameters within the WMC, graphics cards settings adjustment. I also tried to make a 'fresh' start (no extra service, just basic Microsoft services) to try and see if a particular service is causing the problem, but even in these conditions, the problem persists.

    I hope someone can help, if you need more information, let me know.

    Database Rebuild Windows Media Center. Here are the steps- follow carefully.

Maybe you are looking for

  • HP TouchSmart 300-1120 do not start and with noisy fan

    Hello Children were using the PC and recording of large amount of data (about 30 GB) on desktop? Suspecting this could be trigerred overheating that caused the major failure. The dust was found on the heatsink, but nothing was completely clogged. Whe

  • complex tables, merging

    Hello I've attached a photo, because it is difficult to explain, but I want to merge 2 tables 2D, but so that the empty spots do zero, is there a special table VI for that? See drawing:

  • No installation driver for Dell Photo AIO Printer 922

    Windows can't open add printer (0x000006be) I have install can´t the Dell Photo AIO Printer 922 printer.

  • Can reserved system defragment?

    Running Windows 7.  I have a question about defragmentation. First of all, no problem of claning and Defrag the C drive.  Second, I noticed that 5% is fragmented "System Reserved".  My system won't let me analyze or defrag from this area.  Why does i

  • Windows Update won't update

    Hi all I have a computer with a new installation of Windows 7 SP1.  Unfortunately, Windows Update seems to work forever and never gives no results.  So far, I tried the following which seems to be often recommended for problems such as this one: (1)