My ms search opens and then cascades automatically

Similar Questions

• Why would I get a message "the application"Safari"is no longer open, and then he won't open?  Even a search on Fosfire allowed them to prevent me from using Safari?

  End of 2013 iMac 2.7 GHZ Intel Core 8 GB memory 2nx992F8J2 running OSX El Capitan 10.11.1 SN.   Why would I get a message "the application"Safari"is no longer open, and then he won't open?  I went online with Fire Fox and I continue to request now if I want Morel Fire Fox my primary.   Could they have blocked my Safari?  It is difficult to check on it when it won't even developed.

  I answer 'Lestoile.

  Who are "they".

• When I enter an apostrophe when online, it still shows the quick search box, and then I can not type more

  original title: quick search

  When I enter an apostrophe when online, it still shows the quick search box, and then I can not type more

  Hello
  
  1. it occurs when you use a particular application or all applications?
  2 have you tried to use a different keyboard?
  
  Method 1.
  Check what happens when you use the on-screen keyboard. If it works fine here so you can check using another keyboard.
   
   
  Method 2.
  If the problem persists using a keyboard screen ion then run the sfc scan and check.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
   
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
   
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Installed Windows 10, now Word opens and then closes immediately

  When I installed Windows 10 my screen flashed constantly. Rectified that by disabling "Problem reports and Solution Control Panel" and "Windows Error Reporting Service". But now, when I tried to open my "word" it just opens and then closes immediately.

  You mean Microsoft Office Word? This forum is for Mozilla software like the Firefox browser and the Thunderbird e-mail software.

  While we are not very well informed on desktop applications, I found a Microsoft article on the use of "repair" which may help:

  https://support.Office.com/article/repair-an-Office-application-7821d4b6-7C1D-4205-aa0e-a6b40c5bb88b

  If you continue to have the same problem, I suggest using Microsoft support options: https://support.office.com/

• Whenever I open a creative cloud application adobe (such as Photoshop, Flash, AfterEffects etc.) it takes so long to open, and then after a few seconds, it freezes and I have to close the application ("force quit"). What happens here? Th

  Whenever I open a creative cloud application adobe (such as Photoshop, Flash, AfterEffects etc.) it takes so long to open, and then after a few seconds, it freezes and I have to close the application ("force quit"). What happens here? Thank you

  If it's all programs of cc,

  Uninstall (properly using the uninstall programs) all cc

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud and use the app to install your programs of cc.

  If it's only some programs of cc who are broken, reset their preferences-

  Acrobat: https://forums.adobe.com/thread/1595848?start=0&tstart=0

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  hearing: https://forums.adobe.com/thread/1079494

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InCopy: https://forums.adobe.com/thread/526990

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

• The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  
  

  Hi Marcelo,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• A month ago, I subscribed to CC. I have used it with success until this morning. I tried repeatedly to open Lightroom it seems to begin to open, and then disappears. Photoshop works very well.

  A month ago, I subscribed to CC. I have used it with success until this morning. I tried repeatedly to open Lightroom it seems to begin to open, and then disappears. Photoshop works very well.

  You can check this http://blogs.adobe.com/crawlspace/2013/06/updatingupgrading-to-photoshop-cc-faq.html

  You can also express your query to http://feedback.photoshop.com/photoshop_family

  Concerning

  Stéphane

• LR 5 opens and then freezes

  LR 5 opens and then crashes anyone have a solution for this problem?

  Hi mark,

  You work on a Mac or Windows system?

  You please launch Lightroom holding option / alt to catalog and then check if its working or not.

  Concerning

  Sarika

• try to download photoshop and adobe application manager opens and then closes

  I am trying to download photoshop CC that I just bought and when I click on the download button, the icon of adobe application manager opens and then quickly closed saying the adobe application manager quit unexpectedly you want to reopen. I click on reopen and it closes. Any help would be appreciated, thanks!

  uninstall your application, cc, clean and reinstall by, use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Before 4 opens and then crashes when loading project

  I realize that first Elements 4 is old, but I still love and use it for all my projects. Here's my problem: I've been running for 4 months on my new laptop for Win 7 HP 64 - bit, but only today it started to go bonkers. It opens fine, but when I open a project, it minimizes the window pre as soon as it loads. Even if I tried to re-opening the window, he refuses to return to full screen mode.

  I tried the Vista compatibility and even XP, which runs under administrator privileges, but nothing helped. It is the result of a virus or a newly installed program? I return to the edition...

  Thanks for the info.

  There is one thing I need to clarify-do you mean that you can no longer open a new project, one that is empty? If Yes, then you can skip the test below, well we could get back to that, if we can get before you open a new project.

  When you say "raw AVI files", these are DV - AVI, a special form of AVI? This ARTICLE will give you more information about the file formats.

  You mention Audio WMA files. As an AVI file, those can contain a lot of different things, but more on that in a moment.

  With Win7-64, 4 GB of RAM is all that Win7 should work, and leaving not a lot of excess for the programs.

  Now, the projects may become corrupt or unstable, because of many things. Active in a project can become a problem. Test a project for the 'bad' assets is to ensure that the pre is closed and then 'hide' the assets of pre. As the project file, of PREL, contains none of the assets, but only following absolute paths for these assets, it's farily simple. How they structured their active records can greatly simplify this task, or cause a bit of work. It sounds as if your project is pretty simple so far and should not be difficult to follow these steps to test:

  • With the pre is closed, go to or records, where the assets are located and move the folders elsewhere. Don't forget, the PREL uses absolute paths, so that this original path no longer apply. At this point, I also would separate active by type, say with video files in a folder 'Video', still Images in a folder "Images" and the Audio files in a folder "Audio". You'll see why in a moment.
  • Before starting, and then open the project problem.
  • We will be faced with a message dialog box, asking "where is file _? Since we moved these assets, we must help the PrE to find them. Simply navigate to the proposed folder, where the first asset. The display of the dialog box offers a Finder, but since you have moved things, you should have this info. Locate the first file, claiming before.
  • Once you find it, pre will do two things: make the connection again and then look in the folder for other assets, used in this project and also a link to them - pretty neat, huh?
  • Given that we have separated our assets by type, if the first type, say video, very well, that we can exclude those charges. If the project crashes here, we found at least one problem.
  • When meadow comes to the following assets, reappears on the screen of the dialog box, and we will do the same thing: find the file, claiming before, and again, pre will restore the link with it and this search for the active folder. If all goes well, we can probably exclude those assets as a problem.
  • He repeats until either the project managers, or until project accidents, or crashes. If this happens, we reduced things down to a single type of assets. That's why we separated - it's active troubleshooting much easier. Note: Titles are written in XML, in the PREL code, so nothing concrete there for them at this stage.

  Whatever you do, don't choose NOT save, and especially if you decide to Skip Media, or cancel. Only do a Save_As, so to NOT overwrite your original PREL. Never overwrite original PREL, if you are having problems.

  Please report it on this test. The project fails with a specific type? If Yes, what is this type of assets?

  If you have a certain asset of this type, you can redo the test, moving, say half of these goods again and rerun the test. If the project crashes with either the first half or the second, you are closer.

  Good luck

  Hunt

• 15 Firefox load pages several times in my sandbox but I have to click on them from the drawer to open and then manually - remove multiples which gives

  Firefox is loading pages several times in my sandbox - have to open manually from the drawer and then manually remove multiples or it screws until the opening - which is the cause - or chrome or IE do this

  Each button in the task bar normally represents a window of Firefox (or another application window). The two mysteries are (1) why so many windows of the same document and (2) why the windows reduced to the task bar?

  What is the URL of the page that keeps the opening of several windows (reduced)? Is this the same URL that you have as your home page?

  Could you try to use temporarily a blank home page and see if the problem of multiple windows disappears?

  Orange Firefox button or classic menu Tools > Options > general > "startup of Firefox".

• If Firefox is open, and then, I opened my email MS Outlook 2000 client, if there is an email containing an html link, if I click on this link, it does nothing, b

  If Firefox is open, and I then open my MS Outlook 2000 e-mail client, if there is an email with a link inside html, if I click on this link, it doesn't do anything, but if I close Firefox and then click on this email link Firefox opens.

  I find that if I attempt to open another e-mail link, he wouldn't do anything until I closed Firefox again in the end.

  wilsonphurwo,

  Highlighting the link never worked, it was the first thing I tried, I actually found the answer myself after I had posted here.

  Fortunately when this issue has happened before I had copied the solution in Notepad, and it is this I copy here for someone else who may come across this problem.

  Furthermore, the links are hypertext on my MS Outlook 2000 e-mail client, so when you try to copy it only copied the text.

  Anyway, here's the solution to my original problem.

  1. start the desktop or Windows Explorer.
  2. choose that menu 'Tools'-> 'folders Options.
  3. click on the tab "File Types".
  4 scroll to find "URL: HyperText Transfer Protocol" (under the File Types column) and make sure that it is highlighted.
  5. click on the button "Advanced".
  6. in the box "Actions" to ensure that this 'open' is highlighted (click it if necessary)
  7. click on the button 'change '.
  8. uncheck the 'Use DDE', click on the Browse button and navigate to Firefox.exe on your system and click OK. [Updated for clarification, sorry about the previous omission.] If you receive a "file not found" message, find Firefox.exe and click OK.
  9. the path to Firefox.exe should now appear in the "Application used to perform action" box
  10 go in the "Application used to perform action" box and add "-url '%1' ' at the end, without the single quotes, whereas it displays for example (on my computer at least)" C:\Program Files\Mozilla Firefox\firefox.exe "- url '%1' - with quotes!"
  10. click on OK again.
  11. repeat the operation with the file type "URL: HyperText Transfer Protocol with privacy".

• How can I select more than one bookmark at a time so that I can open and then several bookmarks - without the aggravation of back to the list and selecting and opening each one.

  My dozens of bookmarks, I often want to open 5 or 6 of them at the same time - maybe a couple of weather reports, a couple of radio stations, a couple of other Web sites. But I see no way to do this without laboriously find a bookmark, select it, opening the site, then return to the Favorites, find the second bookmark, select it, open the site and so on. There is probably a way for me to select several independent bookmarks, then open them at the same time. Thanks a lot for your help. Don

  Oh I see, when I read your question, my understanding is that you have Web sites that you are opening regularly you would like to open all at once. This is why I have proposed to create a folder with these specific bookmarks.

  However, your clarification, it seems that you want to open Web sites randomly here and there. So, essentially, you want to SELECT favorite sites and then open them at the same time.

  There is a way to do it. Access your bookmarks by clicking on the menu button drop-down orange Firefox (upper-left). It is:

  • Go to \Firefox\Bookmarks\Show all bookmarks;
  • Click on "Bookmarks Menu" (in the sidebar);
  • Use the CTRL key to select your favorite Web sites.
  • Right click and choose "all open tabs.

  It's always a bit laborious, but it's the easiest way, I could find, especially if you want to open several tabs at the same time.

• Satellite computer C75D laptop: HP Solution center opens, and then disappears

  Apparently, there was a software update HP on 18/12/15 followed by 2 updates to windows 12/22 and 12/25/15.  I did not use the meanwhile hp Solution Center, so I don't know which is the origin of the problem.  When I try to open the software, I see it briefly and then disappears.  I need the software to be able to scan. Can anyone offer ideas?  I guess it has to do with one of the updates.  I want to reset my computer, but even that gives me a problem.  Everything was fine before!

  Hello

  This is due to the update of security for Microsoft Windows (KB3132372). Please remove and wait for a fix from Microsoft

  Kind regards.

• CC of Photoshop opens and then closes immediately. What gives?

  I signed up for the package CC Photoshop and Lightroom. Lightroom works well (Lightroom 5.2, 64-bit, Windows 7).

  However, although Photoshop seems to install OK, when I open it, it stops immediately.

  When I look into creative cloud Manager, it says that CC Photoshop is "up-to-date".

  Uninstalled Photoshop CC, disconnected from cloud creative, reconnected again and re-installed Photoshop CC.

  Installation seemed to go OK. I started PS, window opened and closed immediately. Was invited to complete the registration by logging in with my Adobe ID code I did (had done before, but went rhough once again), but PS still blocks.

  Disconnected (e) Creative cloud; signed in again; PS still crashes, but a pop up appears saying I should complete my registration by signing in with my Adobe ID did it, once again.

  Restarted. Always without success.

  I'd appreciate any help. Thank you.

  There is a fix!

  Uninstall Photoshop CC.

  Uninstall Adobe CC.

  Go to: C:\Program Files (x 86) \Common Files\Adobe and find SLCache and delete.

  Go to: C:\ProgramData\Adobe and search for SLStore and delete it.

  Turn it back on.

  Install Adobe CC.

  Install Photoshop.

  Turn it back on.