My Satellite L30-10 s does not work

Similar Questions

• Satellite L30: The sound does not work on XP Sp2

  Hi, sorry but I cannot well English.

  I have a problem. I do not have CD with drivers, but I download from the toshiba site.

  Yesterday, I reinstal windows, then I install all the drivers and I have a problem with the audio drivers.
  In Device Manager is all good, his system is activated, drivers of instalation, I have no problem. But sound does not work.

  You have any ideas?

  Hello

  If the sound does not appear on your laptop, you must first check the volume control on the side of the laptop. Turn it up to the max level.
  Then check the sound devices and audio in the control panel if any controller is disabled or turned to the lower floor.

  Additional connect headphones and check if you can hear something.

  By the way: have you installed the correct drivers? On the Toshiba page, you will find two different sets of portable Satellite L30

• Satellite L30: audio sound does not work - WinXP SP2

  Hello

  I just bought a new laptop (Satellite L30 PSL33E-02S01LBT). He had installed Windows Vista, but it was horribly slow.

  I installed Windows XP SP2 on it's updates. I installed all the drivers from toshiba site I could find for my model.
  Everything works fine except the sound. I tried to install the drivers found on the toshiba Web site, but it fails with this error:
  'No pilot only is supported in the suite of drivers' (AKA FRENCH: 'no driver no is supported in this suite of drivers').

  In my list of equipment I have this with a "?":
  (?) Audio device on High Definition Bus Audio

  I tried to install the Realtek drivers with 5.10.0.5273 version.
  Found the driver here: http://www.mbnet.fi/ajuriapaja/info.asp?AID=10015&TID=10431&OS=10
  This driver has been installed successfully, but the sound still doesn't work.

  So, I removed this driver and found my "Audio on Bus High Definition Audio device"...

  What could I do? Is this computer model toshiba laptop has problems with XP and the sound?

  Thanks for the help...

  Mico

  [Edited by: admin on March 8, 2007 20:21]

  Thanks for the solution Abe! :)

• Satellite L30: WiFi connection does not work with wanadoo box

  I bought a L30 for my daughter for Christmas and wants all ready to go on the day, so have tried to connect to my wanadoo wireless & talk.

  Unfortunately, the laptop wireless card doesn't seem to work. He acknowledges the wanadoo box and tries to connect, but when I enter the WEP key, it searches the network for a few minutes then returns to the "If you want to connect to this network, select 'connect' page."

  I took the adapter wireless to my PC, connected to the laptop, loaded the software wanadoo wireless and connected to the Internet wireless with no problem at all. The problem seems to be with the connection itself - as the laptop detects the wireless network very easily, it just cannot connect.

  I'm not an expert and do not want to 'break' the Christmas gift from my daughter. It is too late to guarantee a replacement arrived, I have to go out & buy a wireless adapter, but deliberately, I bought a laptop with wi - fi, if deeply resent what of not working. I feel so stupid.

  Help, please!

  Hello

  Sometimes it of not possible to connect the wireless network adapter to the router because of the compatibility.
  I have a similar problem with my second notebook at home. The card is compatible with A and B WLan standard but the router support B and G.
  The WLan card is not able to connect to my router.

  However, I think that if the laptop recognizes your wireless LAN, it should be able to connect it. You can try to update the WLan driver and additional test with encryption settings disabled.

• Satellite L30-114 keyboard does not work properly

  Hello

  My Satellite L30-114 lost there head yesterday, he started typing 4 instead of the letter U, 5 instead of I have letter suddenly. I checked his English language page layout. No viruses were detected in my PC.

  How can I fix this weird problem - I can't type anything!

  Hello

  Just, without panic. There is no problem at all. Of course, you have accidentally enabled symbols that appear as small gray symbols to the part of the keyboard. If you look closely, you'll see paved digital buttons as U-4, I-5 and O-6. You can enable/disable this by using the FN + F11 key combination.

  Good bye

• Satellite L30: CD player does not work with the new HARD drive

  Hello

  Just bought a new drive to HARD drive of 250 GB to transform my L30-115 has a home server.

  My problem is when both the new HARD disk drive DVD/CD-RW drive of origin are inserted into L30, the computer crashes and I can not even get into the BIOS (I have the latest edition).

  However, when I disconnect the CD player, system boots fine in a system of operating "plain" (command-line only) - BIOS recognizes very well and everything is fine. Idem: as I disconnect the HARD drive and connect the CD player, I am able to work (for example with a live linux system).

  The question is: * how to install a Windows operating system to a new HARD disk drive *? There is no option to boot from USB. What else can we do? I'm not going to invest more money into this old machine. I would like to install the Windows Home Server in there. There is no need to use the CD player later (all other operations will be performed by the network).

  Person not answering, so I'll do it.

  I was able to boot from USB external floppy drive, so the solution is to boot from external CD drive and install the system.

  It is not an exact solution, because the internal optical drive must be removed, so I'm looking forward to see updates to the BIOS level or other solutions for Toshiba.

• Satellite A10 S203: sound does not work - just enough

  Hello!

  To my satellite A10 S203 sound does not work, I updated my sound card and the bios but nodifferents. Nothing in the system that says that I have something wrong whith my sound is just enough. I tried speakers headphones and challenging systemsounds, mp3, Auidi direct works cd... nothing.

  Any tip?
  [email protected]

  First check the status of the sound card in Device Manager.
  If there is a yellow climbing brand then you should try to reinstall the driver. (first remove it and after reboot, install a new)

  Have you checked the volume setting and the site of laptop? Eventually he s a very simple idea, but believe me, I read many comments here in the forum and a lot of guys forget this option simply.

• Satellite L300 (PSLB8C-0H901X) does not work

  My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

  Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

  As you know this is part more expensive so you need to check if this is the solution for you.
  Call, explain the situation and let it check your laptop.

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• Satellite L30 Windows XP does not download updates

  I formatted my old laptop Equium L30 to factory settings (XP Home) with supplied Toshiba recovery cd. After this, my internet connection does not work correctly.

  I can browse normally (Explorer, Chrome), but the computer is not download the updates of Windows or other updates, updates to the antivirus for example program.

  I've also updated the LAN and WLAN drivers of Toshiba and the site of the manufacturer (Atheros and Realtek).
  Also, I've manually updated Windows SP3 as BIOS (extract from the Toshiba site).

  When I look at the State of both WLAN and LAN connection, the only 'package' that moves is when I browse the internet with the browser.

  Then, help is needed, thank you! :)

  Are you able to update the Windows system using Microsoft Update page: http://windowsupdate.microsoft.com/

• Satellite U920T - function keys does not work after update to Win 10

  Hello, good morning / evening...

  I use (U920T satellite) and recently updated my Windows 10 Tablet
  but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

  I tried to restore the system and update the driver software but nothing has worked...

  I use these keyboard shortcuts all the time and now it's really hard without them!

  What is the problem? What should I do?

  The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
  But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

  For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Maybe you can try the drivers released for other models of portable Win 10 supported...
  I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...

• Installation of Ubuntu 14.04 on Satellite NB10t-A-101 does not work

  Hello world

  Sorry for my English: it is not my mother tongue. I'll try to explain my problem.

  I would like to install Ubuntu 14.04 on my computer (Toshiba Satellite NB10t-A-101), but it does not work.

  I boot on my USB (made with RUFUS), but it works once for each five times.

  After you install the operating system, when I restart the system, the computer does not find an operating system (I precise that I already check the EFI BIOS and disable secure boot)

  How to install Ubuntu?

  Hello

  This series of portable was equipped with a processor Intel Celeron 2810 n and this CPU belongs to the new Intel BayTrail platform.

  The * Intel deposit path * allows only the installation and utilization of systems capable of UEFI as Win 8 or 8.1 Win

• Satellite A500 - 14Q - Microphone does not work

  I have the Toshiba satellite A500 - 14Q for about 3 years. I changed the hard drive, keyboard, frame of the monitor until now, and I'm sick and tired of this laptop does not properly. Now, I've discovered that my microphone does not work. There is no problem in device, or with the driver manager. I hear that crackling noise when I try to enter any other micro device.

  Can anyone help please?

  P. S. I have windows 7 (64-bit)

  How did you test the mic feature? With the help of tool tape recorder?
  > the monitor framework
  Perhaps you have made a mistake and mic is not connected correctly. Did you do it alone or it was done by the Toshiba authorized service provider?

• Satellite A210 - FN buttons does not work on Windows 7

  I have a problem, just install Windows 7 Build 7100 (fron upgrade Vista 32 bit) and the fn on my Satellite A 210 does not work corectly.
  It only works with the action of the num pad, other functions does not work.

  What should I do to make it work?

  It seams that I have problems with the actions of Toshibas tool whitch controls but I can't find name to update...

  Hello!

  I put t understand why Windows 7 is so popular right now it s only a beta version

  However, I think that the reason for this is why no Toshiba tool is available at the moment, but I can understand that because Windows 7 is not yet out.
  You can try to install the package of value added. This is for Vista, but maybe it works also on Windows 7 being the most drivers for Vista works on Windows 7 too.

  Consult the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite A100: Recovery DVD does not work

  I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

  I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

  However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

  What is the problem with that? How can I really use this recovery DVD?
  Someone help me please.

  Thank you.

  Hello

  The recovery procedure is not difficult.
  Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

  Your problem is very strange. You have created all the partitions on the HARD drive?
  I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

  Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)