Windows update fails with error code 57 (KB951847)

Similar Questions

• Windows update fails with error Code: 0 x 80070641 and 0 x 641

  All critical updates are now not to install.  I usually get two Error Codes:

  Error code: 0x80070641Error Code: 0 x 641

  The system ask you to send me the considerable detail of Microsoft on these errors, but I don't know where these files are stored.  I think that I am submitting is done anonymously, so I've never heard anything back.  Help, please!

  Check out my answers here (http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-fails-even-after-running-fix/e1cd6c26-d1b2-4116-8c41-1c22a1d0b543). I think that I have found a workaround.

• Windows Update fails with error code 80073712

  Vista Home Premium SP2 32.

  According to the answer to the previous question on the same subject, I did everything suggested.

  Clean boot.  Made no difference.

  Reset components Windowes update as in the document 971058 (a) non-agressivement, b) in an aggressive manner.  Made no difference.

  12 updates have been identified to be installed.  11 crossed successfully.  Just KB2656374 fails every time with error 80073712.

  What is the next action suggested?

  Hello

  I suggest you try the steps mentioned below and check if it helps:

  Method 1: SFC scan run on the computer to ensure that the system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 2: tool for Description of the preparation of updated the system to Windows Vista, Windows Server 2008 and Windows 7, Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  Hope this information is useful.

• Windows update fails with error code 8E5E0147.

  I have vista SP2. Windows Update is not updated. When you do the update it manually, it says an update is required for windows update. This update fails and it won't let you go further. It gives this error code, but NONE of the research I did seem to have anything on that mistake, except that it was updated to service pack 1. Please help someone.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Tip: Open IE (only) to this page http://support.microsoft.com/kb/971058 and reset Windows Update [run the difficulty in the default and aggressive modes].

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update fails with error code 80070005

  Original title: I have the error code 80070005, I use a laptop Vista Home premium, beginner full but am used to let me install updates just gives me the error code

  have the error code 80070005, I use a laptop Vista Home premium, beginner full but am used to let me install updates just gives me the error code

  Hello

  Follow the steps mentioned below and check if you are able to install updates.

  Step 1: Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

  http://support.Microsoft.com/kb/968003

  Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Step 2: Clean boot.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 to article

   

  Step 3: Temporarily disable the antivirus/firewall.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note:  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  Step 4: Reset Windows Update components.

  Run the fixit in aggressive mode, restart the computer and then look for the updates.

  http://go.Microsoft.com/?linkid=9665683

  Hope this information is useful.

• Windows update fails with error Code: 0 x 80070645

  After the new installation of XP Pro SP3 all Updates MS have now successfully other than
  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86.

  Installation of the stand-alone version also fails.

  No AV software yet haven't installed & turned off the Windows Firewall.

  Hotfixes KB953595, KB958484 & Update KB963707 have installed without error.

  PC is eMachine 2230 joined the field of W2K3. The user ID is administrator.

  Any constructive suggestion / advice welcome please.

  Thank you in advance.

  KB953595 indicates explicitly that the .NET Framework 3.5 must be installed before being installed.

  Conditions required to apply this hotfix, you must have installed .NET Framework 3.5.

  Suggest that you uninstall all 3 updates before attempting installation of Microsoft .NET Framework 3.5 Service Pack 1.
  Then install the .NET Framework 3.5 Family Update for .NET versions 2.0 to 3.5 (KB951847) and finally, the 3 updated.
  If no joy, see - Update: what to do if the other .NET Framework installation troubleshooting do not help

  Blog of Aaron's the place where to go for advice on troubleshooting .NET Framework and the .NET Framework, updated issues. MowGreen Services consumer safety update

• Windows update fails with error Code 0 x 80070570.

  I have recently been given computer laptop Sony VAIO to my daughter and discovered that no update of Windows have managed since October 2009.  He is currently blocked up-to-date KB968389.

  This laptop is under Vista Home Premium SP2.

  0 x 80070570 means what and how to cross this dam?  Nothing on Microsoft are supported answers site or the other question.

  0 X 80070570 - ERROR_FILE_CORRUPT

  I recommend you:

  Go to a command prompt:

  Start, all programs, accessories, command prompt.

  Right click on command prompt and select "Run as Administrator"http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token > and runsfc/scannow http://support.microsoft.com/kb/929833>

  Type exit (to close the elevated command prompt window)

  Reset

  See if that solves the problem.

  If not, run the update http://support.microsoft.com/kb/947821system tool >

  --

• Update fails with error code 48 9.

  Original title: code9C48

  I get this update failed with... 9 ethical c 48... any information would be greatly appreciated... Thank you

  Hi TeresaReynolds,

  ·         Update fails with error code 9 48?

  ·         Are you facing this problem with a particular update or all updates?

  ·         Remember to make changes to the computer, after which the issue started?

  Try the following steps:

  Step 1:

  Temporarily disable the antivirus on the computer running software and check if it helps:

  Disable the anti-virus software

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset Windows components updates default and check to see if it helps:

  How to reset the Windows Update components?

  I hope this helps.

• Windows Update fails with error [error number: 0x800A0007]-which is not listed

  Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system

  The other post:

  Thank you for your reply - but the problem persists - this is mopre complete info.
  The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
  Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
  As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
  Also your "Mr Fixit" was performed several times, but nothing changes.
  Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
  This is what is happening in the process of updating before it fails:
  Keep your computer up-to-date
  Check to see if you need updates for Windows, your programs, your hardware or your devices.

  Get updates of high priority (recommended)
  Select among the priority and optional updates for Windows and other programs

  ... and it does not matter if I say "express" or "custom" - headed then:

  Checking for updates for your computer...

  but fails after a few seconds with the same message as follows:

  [Error number: 0x800A0007]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  -However, it is the State of the system for more complete information for you:
   
  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  MISCHU06BLUE system name
  System manufacturer Compaq Presario 061
  ED865AA - ABA SR1610NX NA540 system model
  System Type X 86-based PC
  Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  MISCHU06BLUE\Compaq_Owner user name
  Time zone Pacific Daylight Time
  Total physical memory 1 024,00 MB
  Available physical memory 468,50 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 1.51 GB
  Paging file C:\pagefile.sys

  Please get us some help to solve this problem.
  What else can I provide?

  I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?

  [This applies to your recent 'me, too' answer to another thread.]

• I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  Need help.

  Hello

  Please see the link below.

  Configuration error. CC, CS

  Hope this will help you.

  Kind regards

  Hervé Khare

• Update fails with error code 652 "WindowsUpdate_00000652" "WindowsUpdate_dt000" Is there a solution?

  Update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688). UPDATE FAILS WITH ERROR 652, ENCOUNTERED AN UNKNOWN ERROR.

  Download size: 5.4 MB

  Update type: Important

  Jim,
  Take a look at this article and see if applies: Mike KB971187 - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update fails with error 0x800f0830

  I have two laptops that were formerly running Windows 7 Professional Edition x 64 on a Server 2008 domain. Due to network problems are intractable, both have been restored at the factory using the Toshiba Recovery Wizard settings.  The chosen option was to retrieve the default values only keeping DO NOT user data. Everything seems to work, but two laptops boots into Windows 7 Home Premium x 64. It's OK, as we have for them use outside the field. Now, my problem is that I can't run Windows Update on each machine.

  Before you run the update of Windows, the following files are in the folder of the download of the Software Distribution folder:

  KB958559 (Windows Virtual PC) and KB958488 (Microsoft .NET Framework 3.5 SP1).

  Launch Windows Update and the updates, I get a message that I need to download an update from Windows Update. I click on update, he begins to search for the update and - error 800F0830. An extensive search on Google has barely turned anything on this error. It does not even appear in the list of troubleshooting of errors. The log of the Software Distribution folder shows "Download failed" and error code 800f0830 for KB958559 and KB958488.

  I tried the following steps to solve the problems:

  Run this utility to update Windows, set except x 0 80070003 errors. Update Services arrested Windows, renamed the Software Distribution folder. Tried new same outage updates.

  Windows Update service stopped, deleted the Software Distribution data files and download folders

  Run system, no found error update readiness tool

  Downloaded KB958559 manually and tried to install it manually. Installation failed with the same error 0x800f0830 code.

  Install the latest Windows Update Agent.

  I'm running out of ideas, but need to be addressed if we're going to use these computers on our network of comments. Any thoughts would be appreciated.

  Peggy

  The Microsoft Community Forums dedicated to helping home computer users. You use Windows Small Business Server, which is beyond the scope of these forums. I suggest that you ask your questions in the Microsoft TechNet forums where they will be better able to help you:

  https://social.technet.Microsoft.com/forums/en-us/home?category=SBSServer

• Vista - Windows update fails, the error code 646

  My windows update failed code 646

  My windows update failed code 646

  Hey wagmalik

  Microsoft gave advice about your error code 646 in the microsoft below link

  http://support.Microsoft.com/kb/2258121

  Walter, the time zone traveller

• Windows Update fails with error 0 x 80244004. Do NOT use Eset.

  When I try to update Windows I get the error that could not display the page with error code 0 x 80244004.

  I am running XP SP3.

  New facility for many years.

  ESET doesn't work DO NOT and never have.

  Run Avast. As an experiment I uninstalled Avast and tried to update without any AV, but still had a problem.

  Virus scan with Avast, Malwarebytes and TDSSKiller that all come clean.

  System may have a rootkit a while back that has been cleaned.

  Proxy has been verified using the proxycfg, no proxy and IE options.

  I don't know exactly when the problem started since I use this computer mainly for file strage and backup and I don't check it that often.

  Installed Java version is version 7 update 21. All previous versions have been removed.

  What else did I miss?

  Thank you!

  I have solved this problem. I downgraded from Microsoft Update, Windows Update. I'm able to install updates with Windows Update. Once made this series of updates, I'll try the upgrade to Microsoft Update and see what happens.

• Windows update fails with error '... DllRegisterServer was not found... ».

  I have exactly the same problem as http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/unable-to-install-windows-updates-error-power/f69a884d-c11c-4e9f-badd-12bafb61d091?tab=AllReplies&tm=1345292404518. The steps gave me the same exact results, as they are described by Ann l. a. at WILL. If the problem persists and I don't know what else to do. HELP PLEASE!

  Original title: Windows update fails

  The problem is solved with these steps (recommended by a microsoft technician):

  1. Click Start, all programs, accessories.
  2. Right-click on command prompt , and then click run as administrator.
  3. In the command prompt, type the following commands and press ENTER after each one.

     CD %windir%\System32
     net stop wuauserv
     net stop bits
     net stop cryptsvc
     Ren C:\Windows\SoftwareDistribution SD2
     net start wuauserv
     net start bits
     net start cryptsvc
     

  Thanks for the interest if!