Windows Update is constantly updated with the same updates successfully, why?

Similar Questions

• Message came up with, "Windows has detected another computer with the same IP address on this netework."

  A message came that said, Windows detected another computer with the same IP address. "... or similar message to one, that could just be the functioning of the laptop for the wireless?

  MurrayJoe:

  > Mean someone has or may have access to my PC or laptop?

  You mentioned a wireless laptop. Do you get this message at home (when your laptop is in communication with your own wireless router), or that you get this message when in a public hotspot?

  If at home, then I would be not too concerned (what security options enabled in your home router?).

  If you get the message while using a public access point, this does not necessarily your computer has been hacked... but it is a warning that you should not ignore. In general, I would not go to any site that has my financial data, or any other sensitive data, a public hotspot. There are too many ways that a public hotspot may be compromised.

  Your original post said that "a message came that said, Windows detected another computer with the same IP address.

  There are several reasons this could happen... some innocent people and some not so innocent.

  If your network is configured for the most common way, then your router uses a feature called Dynamic Host Configuration Protocol (DHCP). You can read about DHCP here...

  http://en.Wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol

  Basically, when a device on your home network needs an IP address, he asks your router and your router assigns an IP address... technically, "rents" the router address for a given period (one day). Once this period has elapsed, the device must 'renew lease'.

  DHCP stops you from the hassle of having to assign a static IP address to each device on your network and then don't forget to retrieve that meet if/when a device are removed from your network.

  Sometimes the process DHCP can be confused and assign the same address on multiple devices. If/when this happens, communication between devices on your home network may be confused. Windows is smart enough to detect that another device on your home network has the same address as the computer where Windows is currently running..., but Windows can not solve the problem.

  You can determine the IP address of the computer that is running Windows (and posted the message you saw)... by entering "ipconfig" (without the quotation marks) at a command line prompt. Then you can check the IP addresses of all devices on your network until you find the other devices with the same IP address. Then you could say either every device to get a new IP address of the router (or restart the device). Alternatively, you can try just stating the computer that is running Windows to get a new IP address (by first entering "ipconfig/release" then "ipconfig / renew" in the command-line invite him... all orders without the quotes).

  But since you said that you are not very tech savvy, my first suggestion was the easiest... just shut everything in your network, and then restart one at a time by starting with your ISP device, router, and other devices. If the problem persists after that, then more troubleshooting (as described in the previous paragraph) would be necessary.

  I hope this helps to clarify the issue for you. If you have any questions, please post them and I'll try to answer.

• Impossible to retart Window XP as an administrator with the same "selective startup" newspaper (with some third party being disabled services) with an administrator account.

  My computer is a Sony (Vaio) desktop computer with Microsoft Windows XP Professional edition,
  service pack 3. It is installed with Internet Explorer 8.

  I meet the Internet Explorer 8 problem right after I tried to run Norton
  Antivirus (2012 version) Live updates some time ago. Updates Live has not been successfully

  completed.

  I tried to open Internet Explorer 8 to connect the site msn.com and others
  Web pages. It still gives me the message "Internet Explorer cannot Display the Webpage".

  I did a full system scan. The computer is clean.
  I also tried to remove all the Internet Explorer add-on to and reset all settings
  by default, but I still can't get Internet Explorer to work.

  I think that something that connects it to the operation of Internet Explorer 8 has been 'broken '.
  during the download of updates to Norton Live. Maybe it's because as the "dial-up".
  slow internet download speed I use, caused some kind of file corruption.
  I'm not too sure.

  I followed a suggestion to Microsoft support engineer in Microsoft Support community
  and I tried disabling Norton services in starting the configuration to see if
  Internet Explorer will work back or not. However, after I did

  Start > run > msconfig

  and all unchecked Norton services and retarted the computer. I had
  an error message saying "I need to log in as an administrator in order to retart.
  the computer with selective startup"even I had logged in as administrator.

  I turned off the computer and retried the above process again, but I still
  got the same error. I did several times without a bit of luck.

  My computer is used only by myself. My user account is an administrator of type with
  all permissions. It is the only user account in my computer.

  I don't know if other permission settings that must be set correctly in order
  for me to retart the computer with the "selective startup" option

  I hope that someone in the Community Support of Microsoft can give me some suggestions and
  instruction. Thanks a lot for your help.

  Best regards
  vichau

  My computer is a Sony (Vaio) desktop computer with Microsoft Windows XP Professional edition,
  service pack 3. It is installed with Internet Explorer 8.

  I meet the Internet Explorer 8 problem right after I tried to run Norton
  Antivirus (2012 version) Live updates some time ago. Updates Live has not been successfully

  completed.

  I tried to open Internet Explorer 8 to connect the site msn.com and others
  Web pages. It still gives me the message "Internet Explorer cannot Display the Webpage".

  I did a full system scan. The computer is clean.
  I also tried to remove all the Internet Explorer add-on to and reset all settings
  by default, but I still can't get Internet Explorer to work.

  I think that something that connects it to the operation of Internet Explorer 8 has been 'broken '.
  during the download of updates to Norton Live. Maybe it's because as the "dial-up".
  slow internet download speed I use, caused some kind of file corruption.
  I'm not too sure.

  I followed a suggestion to Microsoft support engineer in Microsoft Support community
  and I tried disabling Norton services in starting the configuration to see if
  Internet Explorer will work back or not. However, after I did

  Start > run > msconfig

  and all unchecked Norton services and retarted the computer. I had
  an error message saying "I need to log in as an administrator in order to retart.
  the computer with selective startup"even I had logged in as administrator.

  I turned off the computer and retried the above process again, but I still
  got the same error. I did several times without a bit of luck.

  My computer is used only by myself. My user account is an administrator of type with
  all permissions. It is the only user account in my computer.

  I don't know if other permission settings that must be set correctly in order
  for me to retart the computer with the "selective startup" option

  I hope that someone in the Community Support of Microsoft can give me some suggestions and
  instruction. Thanks a lot for your help.

  Best regards
  vichau

  Repair facility and get rid of Norton once you are able to get into your computer again.

• I just did a clean install on the same pc (windows 7 professional 64-bit) with the same key, but it says its invalid?

  As it says in the title I did a clean install on the same pc and this time when I try and its saying its invalid key product keys?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  --------------

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Activation of Windows 7 on an SSD with the same product key.

  Original title: forget to disable Windows 7 key before moving.

  Hello, here is my situation (I've seen another thread like this but I have more specific questions)

  I have a laptop and it was the key to license Windows 7 Pro SP1.

  I recently bought an ssd and learn all about meet the key but I guess I was happy to install the SSD so I forgot to Deauthorize the key.

  I installed the SSD on the same computer laptop and use the same key to activate a few moments ago.

  It seemed to have worked, but he's coming back to haunt me in the future? Or I'm good?

  You could say that I activating me the part on the same physical machine and therefore, exercise was not necessary?

  Thank you

  As long as the old hard drive is removed from the laptop, you should have no problem.

  If you want to go a little further temporarily remove it the SSD drive, connect the hard disk, the boot of Windows (does not need to be connected to the Internet) and open a prompt (run as administrator) and quick entry:

  slmgr - upk and press the Enter key

  Wait a few seconds for the command to run, and then quit the command prompt.  The option - PUK uninstalls your product key from the hard drive.

  Shut down the computer, remove the hard drive, install the SSD drive and your all ready for departure.

  J W Stuart: http://www.pagestart.com

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Windows update keeps reminding me with the same updates

  Windows update keeps reminding me with the same updates

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/910339/en-us >

  Please let us know if it did or did not help to solve your problem.

  UTC/GMT is 22:22 Monday, may 28, 2012

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• Whenever I have shut down my computer it detects 2 updates. I checked the updates of Windows and it seems to be the same ones every day.

  Whenever I have shut down my computer it detects 2 updates. I checked the updates of Windows and it seems to be the same ones every day. And they did so why they keep needing to be updated? They are: a security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864) and: Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2539631)

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  UTC/GMT is 16:02 Friday, September 23, 2011

• Why do an update with the same name every day to security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2467175)

  I installed this point at least 6 times. is there a change in one update to another with the same name?

  Hi RogerMawdsley,
   
  Follow the steps listed in the article given below to resolve this issue:
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

• Updating Win 7 32 Bit to Win 7 64 bit with the same product key

  Hey,.

  I bought a laptop computer where is installed Win 7 Pro 32 Bit. Now, I want to install Win 7 pro 64 bits with the same product key. I have the required software. Is this possible?

  Yes, you can use the same product key to install and activate the 64-bit version.

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the DVD 64 bit Windows 7

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Windows is properly install and reinstall the same everyday 8 updates, as if they were new updates. What should I do?

  Windows is properly install and reinstall the same everyday 8 updates, as if they were new updates.  What should I do?

  The "same 8 updated?"

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Updating my windows... Problems with the driver AMD/ATI.

  Updating my windows... Problems with the driver AMD/ATI.

  PLEASE NOTIFY

  Original title: AMD/ATI driver

  Hi Amanda,.

  1. What is the exact issue that you are facing?

  2. What is the brand and model of the computer?

  3. that you get an error while trying to install updates?

  4. don't you make changes to the computer before this problem?

  If you have a hardware device that does not properly with your computer, you probably need a driver updated.

  Update a hardware driver that is not working properly:'t-working-properly#update-driver-hardware-isn't-working-properly=windows-7 http://windows.microsoft.com/en-in/windows/update-driver-hardware-isn

  Thank you.

• How can I download the new update on my Macbook pro when the password is not working? When I connect to the Adobe site with the same user name and password it DOES not work. I don't understand why.

  So I have a macbook pro - and she advised me that I had to update my Adobe flash player. So I go through all the steps and I'm stuck at the last stage, where he asks me my user name and password. I go in there correctly - several times and it does NOT connect. He shakes to show that there's an error. Double check my file AND I go to the Adobe site to connect with the same information. and it works very well.

  WHAT IS THE PROBLEM? Help please.

  Could you please try ComputerName administrator as username and the password as password.

  I hope this works.

  Concerning

  Hervé Khare

• After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  Yes, no extra accommodation payment is required. After editing your site and savings, click download file to the host of VTT... The info should auto fill with the same information that you used to download the site the first time. You can choose to download only files "changed" or "all files". Click OK and the old files will be overwritten.

• Server data store will automatically get updated when the new file (with the same name) is placed in the landing area

  
  Hi guys,.

  The data store server-side will get automatically updated when a new file with the same name is loaded in the landing area?

  for example

  1 data store created for server-side get the file named UK.xls (he has 5 rows)

  2 snapshot created for the above data store

  3. created with the snapshot process

  After that if I remove 2 lines from the same file and load again to the landing (with the same name). So by re-running the process will take the last file OR do I need to reload the file in the data store every time when there is a change in the file. We also tried with option to work but the last file was not picking up.

  Any help will be really appreciated.

  Please lets us know your updates.

  Please advice

  Thank you

  VT

  Hello

  When you create a snapshot, you create a snapshot whose task (provided that you use a data store server-side) can be run from a job. To refresh the data, run the snapshot in a job task. If you create a task at the time the snapshot and the processes that use it, they will automatically connect and will be 'upstream' data through the snapshot in the process. You can then choose whether it would be appropriate to write the snapshot or not (for the effectiveness of performance if you want to do the straight through processing) by activating or deactivating the bucket of data staged that the snapshot written to. The snapshot in the work task means that the data is refreshed.

  For the work of design to the Director, you can refresh the snapshot by running again it manually in the context menu.

  Kind regards

  Mike