Windows Update: KB982168 and KB982524 are repeatedly offered

Similar Questions

• Windows updates? (KB2478663, KB446708, KB2160841) - repeatedly offered the same updates

  original title: Windows updates? (KB2478663, KB446708, KB2160841)

  Why my computer keep install these same Windows updates? (KB2478663, KB446708, KB2160841)

  Whenever the stautus indicates successful. I can turn off the computer after the update the next time I start the computer it says that it is ready to install. Again, I can look at my editing history and it is said that they where downlaoded successful.

  Thank you

  Hi MR. B95,

  You can read the following article and see if it helps.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  Hope this information is useful.

• Windows update KB982110 and KB2272691 are delete my profile from the user when the update and installed

  Whenever my computer updates and installs KB982110 and KB2272691 my user profile is deleted and I find uninstall?  Are these really necessary updates and is it possible to get these updates without user being deleted my profile?

  Hi hunneebun,
  
  These mentioned updates are released to fix application compatibility issues.
   
  It may or may not be important depending on the types of applications you have installed.
   
  However, you can try the following steps and check if they help install the updates without any problem.
   
  Step 1:
   
  Disable all security software temporarily and try to install the updates.
   
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Firewall: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  You can place your computer in a clean boot State and install the standalone updates below.
   
  Note: follow step 7 to your computer as usual.
   
  Stand alone package.
   
  Update for Windows 7 (KB982110)
  Update for Windows 7 (KB2272691)
   
  See also:
   
  http://support.Microsoft.com/kb/982110
  http://support.Microsoft.com/kb/2272691
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cannot install Windows Update KB2728973 and KB2917500

  Hello!

  The Windows Update KB2728973 and KB2917500 are appearing repeatedly on Help and Support Center, windows update and the automatic update check on purpose to get updates of high priority (recommended) button.

  The update of windows KB2728973 will automatically appear on the notification area.  I installed the KB2728973 update.  When I check the latest version of windows update in Help and Support Center, the KB2917500 appears in patches of high priority (recommended).  I also installed the KB2917500 update.  Once again, the update of windows KB2728973 will be automatically appears on the notification area and install it again.  And even once, when you check that the latest version of windows update in Help and Support Center, the KB2917500 appears again in the updates of high priority (recommended).

  As a closure update, only once you update, it appears again.

  Looking forward to our experts advise on this issue.  Guys thank you very much in advance.

  You only need KB2917500 since it replaces the KB2728973. Try to install manually by downloading it from http://www.microsoft.com/downloads/details.aspx?FamilyId=11534eba-01c5-42ad-8254-3123fe204661.

• Cannot install updates kb979909 and kb982168 and kb982524

  I have automatic updates turned on however, whenever I have download and install these 3 security updates, I get a message that I have updates ready to install in my notification area on toolbar.

  phajd,

  How to troubleshoot windows update or microsoft update when you are repeatedly offered an updatehttp://support.microsoft.com/kb/910339

• Cannot access the Windows Update site and install updates

  Original title: 2 problems 1 when he goes to win the update, I get, can not display the page. 2 if I'm going in a different direction and I get search updates, scanning (encountered a problem can not display the page) comes up and on the opportunity of the page crashes.

  I did fix it, I disabled all firewall internet security and and also listed win update to a trusted site.

  Hi trski,

  I recommend you to check for possible malware program.

  1 restart the computer using safe mode with networking. If you have a Type of Internet connection wireless, have a wired internet connection. To restart in Mode safe mode with networking:
  a. press the restart.
  (b) at the moment you press the restart button, keep tapping F8 until that Advanced Boot Options appears.
  c. Select Mode safe mode with networking
  2. open the Web browser to explore and go to http://safety.live.com.
  3 scan the OneCare Safety Scanner full Service.
  4. take note of the items that are detected, but cannot be deleted, as appropriate. Get back to me with the names of the infections that cannot be removed, if necessary.
  5. after removing the infection (if any), start in Normal Mode by restarting just the normal computer like you do it.

  Run Windows Update again, and get back to us with your findings.

  If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows updates KB2443105 and KB979687 do not settle

  I recently added a new hard drive for my computer and installed the XP operating system on this disk. I start now to make the drive and everything seems to work OK except when I get the notice that updates (KB2443105 and KB979687) are ready to be installed on my computer. Whenever I see this review and try to allow installation of update, I get a notice on the screen of installation which updates failed. Someone has encountered this situation and is there a solution?

  Hi buckeyeut,

  Try the following:

  Method 1: Locate the installation error code.

  To do this, follow these steps:

  a. click Start, click all programsand then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the State of this window column, find the update failed to install and then click on the red X. A new window opens that displays the installation error code.

  d. Note the error number. You will have to type or paste the error number in a search box to the next step.

  Method 2: Reset the update Windows components, and then install the updates. Visit the following link and click on Fixit.

  How to reset the Windows Update components?

  Do not respond with error if it fails again.

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• Vista - windows update broken (and then some)

  Hi everyone, maybe you could help me with this...

  My system is a laptop running vista home basic service pack 2.
  The laptop is also on a wireless network without proxy.
  all moving parts are functional, I would say... (ram hd etc..)

  It seems that this update of windows is quite unable. Common symptoms are
  -When you try to search updates notice occurs that the service is stopped.
  -A separate statement occurs informing that a host process has stopped working.

  The most recent update I see is 11/09.

  A quick glance around my services leads me to believe that BITS is the problem, because I can't seem to start the service without stopping quickly. It also reproduces the host process error notice.
  Event Viewer shows a consistent error listed as follows...

  Failing application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47918b89, failed module qmgr.dll, version 7.0.6002.18005, time stamp 0x49e037de, exception 0xc000001d, offset 0x000587e7, process 0x2d8 id error code, start the application time 0x01ca8c8b35264f9f.

  The error also occurs with windows defender.

  I tried the fix for BITS of http://support.microsoft.com/default.aspx/kb/940520 including the manual fix suggests the page.
  I also tried several methods which included manually stopping and restarting the windows update service and other services that I considered relevant.
  System restore failed me on all accounts, Startup Repair can not find anything.
  This error is also reproduced in safemode, but also a clean boot.

  An interesting thing that I met just used the fixit found here
  http://support.Microsoft.com/kb/971058
  I ran it automatically with the aggressive function checked.
  After the reboot, I found that windows update worked but then the two BITS and windows update services stopped.
  There is also a message in the editing window:

  Code 800706BA (unknown error)

  I did a considerable amount of research on the internet, including the knowledge base and I can't seem to find a solution for this. So I turn here. After watching a few discussions, it seems that people here are knowledgeable and helpful.
  In all sincerity at all any help is GREATLY appreciated.
  Thank you for your time.

  Hello

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  The foregoing is necessary preparatory work.

  ------------------------------------------------------------------
  Error 800706ba Windows Update<- check="" this="">
  http://www.instantvista.com/800706ba.html

  If the updates you don't need or want the control panel - Windows Updates - click right on and HIDE.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  To download manually:

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Update download and install when my PC is in mode 5000mAh?

  Will windows update download and install when my PC is in mode 5000mAh?

  Hi Hassan,.

  You will not be able to plan / run Windows update in standby mode. It can be in "idle" mode or when executing system.

  I hope this helps.

• Windows update downloaded and installed sp1 and sp2. Both show as successful in the history of the update but does not show in 'the computer properties.

  Windows update downloaded and installed sp1 and sp2. Both show as "successful" in the history of the update however my computer properties tab represents OS is Windows Vista Home Premium and shows no indication of SP1 or SP2. Is there a process of 'activation' these? Should not be done automatically? Any help is appreciated!

  Hello

  Thanks for posting the request in the Microsoft Community.

  Method 1:

  I would say as you to see the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2:

  Step 1:

  I suggest to refer to the article and try to run the system update tool:

  System update scan tool corrects errors of Windows Update in Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  Step 2:

  You can check the link and try to obtain the latest Service Pack for Windows Vista:

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Let us know if it helps.

• Windows 7 CBS huge log files, very heavy use of the disk during Windows Update passages and plenty of RAM used by svchost

  Since I installed and then uninstalled windows 7 display language pack (it is thus more no record of it in the locale), namely for the Chinese, I get my CBS.logs (reaching several hundred MB to each race) filled with lines like these:

  "2015-07-18 22:07:35, CBS Appl info: detecting, Package Parent: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, Parent: Microsoft-Windows-WinPE-LanguagePack-Package~31bf3856ad364e35~amd64~ar-SA~6.1.7601.17514, layout = Detect, VersionComp: EQ, ServiceComp: EQ, BuildComp: EQ, DistributionComp: GE, RevisionComp: GE, Exist: present.
  2015-07-18 22:07:35, CBS Appl info: detectParent: package: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, no found parent, go away
  2015-07-18 22:07:35, CBS Appl info: detecting, Package Parent: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, Parent: Microsoft-Windows-WinPE-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.1.7601.17514, layout = Detect, VersionComp: EQ, ServiceComp: EQ, BuildComp: EQ, DistributionComp: GE, RevisionComp: GE, Exist: present
  2015-07-18 22:07:35, CBS Appl info: detectParent: package: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, no found parent, go away
  "2015-07-18 22:07:35, CBS Appl info: detecting, Package Parent: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, Parent: Microsoft-Windows-WinPE-LanguagePack-Package~31bf3856ad364e35~amd64~hu-HU~6.1.7601.17514, layout = Detect, VersionComp: EQ, ServiceComp: EQ, BuildComp: EQ, DistributionComp: GE, RevisionComp: GE, Exist: present.

  and these:

  «2015-07-18 22:07:35, CBS Applicability (ComponentAnalyzerEvaluateSelfUpdate) info: component: amd64_microsoft-windows-b...» OS - loader.resources_31bf3856ad364e35_6.1.7601.23002_cs - cz_91faa7482cc099d9, raise: 2, applicable(true/false): 0
  2015-07-18 22:07:35, CBS Appl info: Selfupdate, component: amd64_microsoft-windows-b... OS - loader.resources_31bf3856ad364e35_0.0.0.0_da - dk_5074e001f3d72380 (6.1.7601.23002), altitude: 2 lower support of revision version: 0.0.0.0
  2015-07-18 22:07:35, CBS Applicability (ComponentAnalyzerEvaluateSelfUpdate) info: component: amd64_microsoft-windows-b... OS - loader.resources_31bf3856ad364e35_6.1.7601.23002_da - dk_2f34876f230695d8, raise: 2, applicable(true/false): 0 ''

  Now, it seems that windows is searching for updates on all the available languages and that really cripples my PC whenever Windows Update for new updates, what can I do to stop this?

  Thank you

  After the installation and the removal of the update of Chinese language (even though he was again through regional settings because I could not see it in the installed applications or updates, and if I used the windows update install) and after the windows update service modules and removing all CBS connects the problem seems to have disappeared.

  Thank you all for your help.

• Windows Update failure and & SFC /scannnow results

  Hello, Win7 64 bit home edition Premium user.

  I restarted my PC with an old XP OEM from my previous PC drive and he started to move - I stopped it at first, but he replaced my startup file, I had to be replaced by reinstalling my backup/dual boot OS, Linux Mint.  After spending a whole day trying to solve my startup files (Windows Repair on the Windows 7 disk did not work, System Restore was not available), I went into Windows by copying the necessary files from the drive via the command prompt.  At least, I think it's finally finished work - it was quite a long ordeal.
  Fast forward to today: after being able to go back to Windows (if I have still two entrances Win7 on my Start menu that seem to do the same thing), I noticed that some of my mouse functions have disappeared (zoom button does more work), and my windows updates will install is no longer.  I tried to replace the mouse driver software, but after uninstalling it with "Program install and uninstall" Fix - It, I could not reinstall it because I got an error message saying that a newer version of the software has already been installed.  I raise this issue because I believe that it is a problem with Windows Update no longer works.  I even took the trouble to uninstall however much 100 + updates I had allowed the years to start from the beginning, and now I'm stuck with more than 100 updates failed instead of a dozen or two.
  It getting to download 0% for a very long time sometimes hours, before finally download and try to install the updates many and always default.  I tried the troubleshooting Windows Update tool, and it did not help.  I tried to solve any problems by using the file system (SFC/scannow at the command prompt) checker, but no luck - I received an error message stating that there were records that he was unable to repair.  I created a sfcdetails.txt (findstr/c: "[SR]" %windir%\Logs\CBS\CBS.log > '% userprofile%\Desktop\sfcdetails.txt'), but there is no listed in that document, *.dll files so that I could replace them.
  TL; DR - Windows Update does not work and problems with the mouse drivers, I guess. What files should I replace and how
  ?
  Sfcdetails.txt content looks like this:
  2013-07-19 10:17:09, info CSI 00000009 [SR] components check 100 (0 x 0000000000000064)

  2013-07-19 10:17:09, CSI information 0000000 transaction [SR] beginning verify and repair

  2013-07-19 10:17:12, information 0000000 c [SR] audit CSI complete

  2013-07-19 10:17:12, CSI to 0000000 d [SR] 100 audit information (0 x 0000000000000064) components

  2013-07-19 10:17:12, Info CSI 0000000e transaction [SR] beginning verify and repair

  2013-07-19 10:17:14, info CSI 00000010 [SR] verification complete

  (Often, with the exception of a few eccentric where the number isn't 100 :))

  2013-07-19 10:25:50, CSI Info 000002 c 9 [SR] components check 88 (0 x 0000000000000058)

  2013-07-19 10:25:50, CSI Info 000002ca transaction [SR] beginning verify and repair

  2013-07-19 10:25:53, 000002cc CSI Info [SR] verification complete

  2013-07-19 10:25:53, CSI Info 000002 cd [SR] repair 0 components

  2013-07-19 10:25:53, CSI Info 000002ce transaction [SR] beginning verify and repair

  2013-07-19 10:25:53, CSI Info 000002 d 0 [SR] full repair

  2013-07-19 14:02:35, CSI Info 000002 c 9 [SR] components check 88 (0 x 0000000000000058)

  2013-07-19 14:02:35, CSI Info 000002ca transaction [SR] beginning verify and repair

  2013-07-19 14:02:41, 000002cc CSI Info [SR] verification complete

  2013-07-19 14:02:41, CSI Info 000002 cd [SR] repair 0 components

  2013-07-19 14:02:41, 000002ce CSI Info transaction [SR] beginning verify and repair

  2013-07-19 14:02:41, CSI Info 000002 d 0 [SR] full repair

  Thank you

  TS

  Hello

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  Windows Update crashes when installing updates in Windows 8, Windows 7, or Windows Vista

  http://support.Microsoft.com/kb/2700567/en-us

  Note If the computer had Windows pre-installed, see the manufacturer's documentation for how to do an upgrade on the spot.

  Note We recommend that you back up all personal files. For more information about how to back up your files, go to the following Microsoft Web site:

  I hope this helps.

• tried to send emails of 3 live Windows Live mail and they are stuck. How can I remove them?

  I tried to send emails of 3 large screws Windows Live mail and they are stuck. How can I remove them?

  Check first to work offline and then open the shipping box and remove them.
   
   
  Windows Live Mail help is in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• XP - cannot install KB982168 and KB982524 Office SP3 updates

  My Windows xp pro 32-bit is not install three updates from microsoft on my computer. KB982168, Office 2003 SP3, KB982524. How can I fix this? My system is running on xp service pack 3

  There are error codes and you'll find them on the WU site. I guess that you are not the original author.

  For Office updates, usual error is "646" see: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/18449f60-c149-4eaf-b8e6-a2880cd7232b

  In particular: http://support.microsoft.com/kb/2258121

  Regarding the framework updates - most likely they are corrupt and must be reinstalled.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Important updates of .NET Framework available on Windows Update
  http://support.Microsoft.com/kb/972265

  When you run Setup of .NET Framework 3.5 SP1 with a user account whose name begins with a character #, the installation will fail.
  http://support.Microsoft.com/kb/969865

  If you reinstall early frame with 3 and then do all the updates and then perform the 1.1 updates and everything.

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  TaurArian [MVP] 2005-2011 - Update Services