Windows Vista automatically locks the computer.

Similar Questions

• Update Vista has locked the computer

  Hello
  I would like some advice on a problem that I am having with my computer of partners.
  The computer is a 32-bit Sony Vaio runnigg Ms Vista.
  MS pointed out that you had to install an update.
  The update was Vista Service pack 2
  The table of progress has shown that it has been installed after 30 minutes that he was always be installed.
  I turned off the computer, but restarting the installation update message was the first and the only screen to appear (no startup screen with options) and remained there for 120 minutes.
  For some time the the hard drive activity light permanently on but has now established a regular 1 second flashes.

  You can offer me some advice please.

  Your

  peekfreen

  Hello
  I would like some advice on a problem that I am having with my computer of partners.
  The computer is a 32-bit Sony Vaio runnigg Ms Vista.
  MS pointed out that you had to install an update.
  The update was Vista Service pack 2
  The table of progress has shown that it has been installed after 30 minutes that he was always be installed.
  I turned off the computer , but restarting the installation update message was the first and the only screen to appear (no startup screen with options) and remained there for 120 minutes.
  For some time the the hard drive activity light permanently on but has now established a regular 1 second flashes.

  You can offer me some advice please.

  Your

  peekfreen

  You should never have turned off the computer.

  Service Packs can take a long time to install.

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Why Windows Vista automatically changes the size of the window when I load a program?

  I want a full screen.  Vista will load the program with 1/4 window size or 1/2, etc. instead of full page size.  How can I tell to stop doing that?  This happens with programs and Internet Explorer.

  Hello

  Try this method for the opening of size problems

  http://www.theeldergeek.com/maximize_internet_explorer.htm

• Windows Vista boot on the computer desktop/icons

  Run the Task Manager and closing tasks, I inadvertently closed a program associated with the icons from starup office window... How can I get this back on the desktop of the computer without performing a restore?

  What program do you have loved ones? If you end-load on explorer.exe, you can start it by choosing new task and typing: explorer.exe. Or just restart the computer. MS - MVP - Elephant Boy computers - don't panic!

• Windows key and L will be lock the computer under windows xl, will be the same on vista__

  I want to know if when I leave my computer to run to the bathroom and do not want to leave open confidential information the windows key and the L key locks the computer with vista?

  Yes, it will be.

  The link below is a list of all default shortcut keys in Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/keyboard-shortcuts

  The following table contains keyboard shortcuts for use with the Microsoft keyboards.

  Windows logo key	Open or close the start menu
  Windows logo key + BREAK	Display the System Properties dialog box
  Windows logo key + D	Show the desktop
  Windows logo key + M	Minimize all windows
  Windows logo key + SHIFT + M	Restore windows reduced on the desktop
  Windows logo key + E	Open Computer
  Windows logo key + F	Search for a file or folder
  CTRL + Windows key + F	Search for computers (if you are on a network)
  Windows logo key + L	Lock your computer or switch users

  See you soon. Mick Murphy - Microsoft partner

• Update Windows automatically restarts the computer. I would like to disable this feature.

  Update Windows automatically restarts the computer. I would like to disable this feature. I'm running a machine business with complex projects requiring a configuration long and delicate. The details below:
  Type of operating system: Windows 7 Ultimate
  Problem: Status of the project lost after auto restart during the night
  Require: A method of disabling automatic restart after an automatic update is happening.
  Tried: I already tried looking in the registry for an appropriate key change, but no have been found appropriate.

  Aelryn,
  You can configure Windows update to meet your needs, for example, download the update and then let me choose when to install the same. This way you always get the automatic updates but you chose when and where and how to install updates at a time that is convenient.

  Then I suggest to change the Automatic Updates settings to meet the needs of PAHO.

  Choice, you can turn off to THE (not recommended), you can adjust to download updates only and allow you to install them at a convenient time, you can adjust information only, or you can leave to do what he likes.

  If you update, you must restart sometime in the case otherwise you are not protected and you might as well do not update at all. Everything is a matter of choice. One size does not fit all, so a choice can be made. I have updates informed me only, then I decide what, when and how to do to install the updates. It's my choice.

  FYI -.
  http://blogs.technet.com/Mu/archive/2008/10/02/Windows-Update-and-automatic-reboots.aspx
  TaurArian [MVP] 2005-2010 - Update Services

• When you do the automatic updates of Windows Vista I get the "Security Update for Windows Media Format Runtime 11 for Windows Vista (KB968816)" = Failed__

  When you do the automatic updates of Windows Vista, I get the code below.

  'A security update for Windows Media Format Runtime 11 for Windows Vista (KB968816)' = failure

  • What should I do to fix this?
  • And what does this update actually?

  Thanks for any help provided.

  scrubie,
  If you go to programs and features, and then on the left side you should see a link for "Daily display installed."  Which would then show the list of updates with the State which will show you if it failed or not.

  Hope that helps. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows vista says that another computer has the same ip number

  should windows features all disabled a bunch of them are turned off I think someone had remote access to my computer I can not turn on my windows defender and cannot uninstall my logitech webcam my children sharing files and folders via google is better to reset my computer to factory settings and get a new cable company ip number that has BREAD IN THE APPS

  should windows features all disabled a bunch of them are turned off I think someone had remote access to my computer, I can not turn on my windows Defender and can not uninstall my logitech webcam my children were sharing files and folders via google is better to reset my computer to factory settings and get a new cable WHAT GALLEY ip number IN enterprise applications

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  ______________________________________________________

  This is typically what must and must not be activated:

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-feature-guide/

  _____________________________________________________

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  ___________________________________________________________

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have 2 versions of windows vista running on my computer. One is before it crashed and it took all the RAM (Ram)

  I can't clean the discs because I can't load any programs because the memory has faded.  So I can not put a page of my computer desktop or download programs, I need to get my images that I have on the other program running.  I can't open one of these programs because I don't have the authorization even if I was always the user and administrator.  What I would do.  Can I add more memory Ram?  Can I remove the old stuff that I can't open anyway.  DLLs etc.  I downloaded vista 2pr, but it does not work.

  Hello

  Here is the information from your other question here about it:

  "I can't collect any information of my system information page."  When I connect I get redirected to a page that asks me what version of vista I want to open.  One is Microsoft vista and the other is windows vista.  The Microsoft is the only one that works. The other takes me a blank page. »

  "I have 2 versions of windows vista running on my computer. One is before it crashed and it took all the RAM (Ram).

  I suggest that you save your data and reinstall the operating system properly.

  There are several methods to reinstall Vista.

  See what methos works for you.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have a computer with Windows Vista business on her key. I have a dell windows vista Enterprise drive. the product to activate my acer desktop computer?

  Activation of WINDOWS VISTA oem with another oem drive?

  HI I have a computer with windows vista business on that key. Apparently, I do not have the original OEM drive but I have a dell windows vista Enterprise drive. the product to activate my acer desktop computer?

  Hello

  A manufacturer of recovery disc is designed for a particular brand and computer model; they are not interchangeable.

  Here is the link to order the Acer recovery disks:

  http://us-store.Acer.com/RCD/

  And if the Acer never included a drive to purchase, you should have a recovery Partition on your hard disk to reinstall Vista to how it was when new.

  With an Acer, you press Alt + F10 at startup to start the process of recovery back to new condition.

  See you soon.

• 2 window vista Ultimate on the same computer.

  Windows Vista Ultimate had some problem so I installed another a thought that whoever has the problem would be to replace it with the new, but he does not. So now I'm stuck with 2 Windows Vista Ultimate on my computer and it take so much space. So my question is: how to remove or uninstall Windows Vista Ultimate Edition. Even if you have a little idea, submit it.*

  Alyosha

  Alyosha,

  Remove or uninstall Windows Vista is possible in specific scenarios. You please clarify how you did your installation of Windows Vista?

  1. have you installed your new ultimate configuration on a new partition?

  2. have you you choose customized and placed the installation in the same partition as your old ultimate configuration? In this case you see two Windows folder in your C: drive / drive (or any other partition)? (Possibly with the .old extension)

  For installation of two operating systems to Windows Vista on two separate partitions study the following:

  Before you begin you will need your Installation of Vista support

  _________________________________

  First Back Up all important install the data in the view you want to delete.

  http://windowshelp.Microsoft.com/Windows/en-us/help/699ce30c-13f1-46EC-9684-e84bf4109dd81033.mspx

  __________________________________

  Start then in the version of Vista you want to keep and follow these steps to reformat the partition now unwanted Vista install and then uninstall.

  Note:

  • Formatting a volume will destroy all data on the partition. Be sure to make backups of all the data to save before you begin.
  • You cannot format a disk or partition that is currently in use, including the partition that contains Windows.
  • Quick format is a formatting option that creates a new file table, but do not completely overwrite or erase the volume. A quick format is much faster than a normal format, which fully erases the existing data on the volume.

   

  1. open computer management by clicking the Start button, click Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the Navigation pane, under storage, click disk management.

  3. right click on the volume that you want to format, and then click format.

  4. to format the volume with the default settings, in the format dialog box, click OK, and then click OK again.

  __________________________________

  Then, we will need rebuild your boot configuration data, follow these steps:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted.
  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  4. Click repair your computer.
  5. Click the operating system you want to repair, and then click Next.
  6. In the System Recovery Options dialog box, click command prompt.
  7. Type Bootrec.exe /RebuildBcd, and then press ENTER.
  8. Restart

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  • bcdedit/export C:\BCD_Backup
  • c:
  • Boot CD
  • BCD attrib s h - r
  • Ren c:\boot\bcd BCD.old
  • Bootrec /RebuildBcd

  __________________________________

  Please consider each step carefully, let us know your result. Please use the Support Forum for Microsoft Vista.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why the Windows Vista client gets the IP address of the Windows SBS 2011 as default DNS server?

  I use Windows Vista on a client computer that is connected to our Windows Server SBS 2011 server. I don't want to use the DNS server on the local server and the DNS addresses are automatically collected on our router. Every time I have to restart my computer or disconnect / reconnect the connection to the local network, the default DNS server address is set back to static and has the IP address of the local server, which makes it much slower DNS specifications.

  Can I disable this automatic update of address of DNS server somehow? In fact, I don't want to run a DNS server on the local server.

  Thank you to inform in advance!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Locking the computer does not

  The option lock the computer disappeared from my screen CTRL + ALT + DELETE, and the Windows + L keyboard shortcut no longer works to lock my computer!  I tried the methods described in these pages...
  http://www.SevenForums.com/tutorials/63008-CTRL-ALT-DEL-screen-add-remove-lock-computer.html
  http://www.howtogeek.com/HOWTO/Windows-Vista/disableenable-Lock-Workstation-functionality-Windows-l/
  .. .but nothing seems to work! Help, please! I use Windows 7 Professional, 32-bit with connection to the domain. Any other ideas or suggestions would be appreciated. Thank you.

  I solved this by using the system restore.

• Remove the Windows Vista so that the upgrade can continue. He says that I can not upgrade both on the drive.

  I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  Soon, I discovered that I was getting conflict on my computer and he discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

  need an answer as soon as possible... Thank you

  I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  I soon discovered that I was getting conflicts on my computer and discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

  need an answer as soon as possible... Thank you

  Hello

  The best way is to clean install and start over.

  In addition, it is not legal to have both installed version that the license is for a single installation.

  If it is a dual boot with 32 bit and 64 bit installed on different partitions, there would not have been the conflicts you would have never started in one or the other.

  See you soon.

• Using Windows Vista and IE9. Computer is very slow.

  My system is installed with windows vista and using the Explorer 9. My syster is very slow. How can you help me?

  Original title: my system is installed with windows vista and using the Explorer 9. My syster is very slow. How can you help me?

  Hello

  See if this helps you:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

  If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.