Windows VISTA can't manage USB devices

Similar Questions

• Windows Vista can be upgraded directly to Windows 1?

  I wanted to know if my Version of Windows Vista, can be improved 'straight' to Windows 10.

  N °

• The number of cores in Windows Vista can support?

  Windows Vista is able to make full use of Intel Core i3, i5, and i7 processors?

  If not, the number of cores maximum Windows Vista can handle?

  Rannvijay Kapoor

  Hello

  Yes Vista can support all the people and all the kernels. Of course the material must also
  support for Vista that shouldn't really be a problem.

  Note here that Vista supports an unlimited number of hearts. There are limits on the
  the number of physical processors.
  http://www.ExtremeTech.com/Article2/0, 1697,2068721,00.asp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

  Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

  Click Start > devices and printers > add a device, make sure that Bluetooth is turned on. For additional help, see the following link:
  http://www.Apple.com/support/iPhone/ http://www.activewin.com http://adacosta.spaces.live.com Andre Da Costa

• If I upgrade my windows 7 to windows 8 can still install my device drivers?

  Original title:

  Windows 7

  If I upgrade my windows 7 to windows 8 can still install my device drivers?

  (Moved to programs)

  If I upgrade my windows 7 to windows 8 I can still install my device drivers?

  Hello

  It depends on if your computer or hardware manufacturer has Windows 8 drivers available in your computer model and the 3rd party hardware.

  Do the following before upgrade you to Windows 8/8.1.

  Check if the manufacturer of your computer/laptop has Windows 8/8.1 drivers available for your model.

  If this is not available, Windows 8/8.1 not install and work properly for you.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

  ASUS:

  http://www.ASUS.com/support

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

  ____________________________________________________________

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  :

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  See you soon.

• My Windows vista can't recognize the digital camera usb conncetion, can anyone help?

  I uninstalled the drivers and still does not recognize the usb 2.0 connection.

  Hi Jack,

  1. What is the brand and model of the camera?

  2 do the camera work on any other computer?

  3. other USB devices work properly?

  4. did you try connecting to different USB ports?

  5 have had any changes made to the computer before the show?

  Please follow the methods and check if it works very well.

  Method 1:

  Run the Microsoft Fixit for the link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Try to uninstall and reinstall the USB controllers

  a. click the Start button.

  b in the start search box, type devmgmt.msc and press enter

  c. expand Bus USB controllers

  d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

• Windows 7 does not recognize USB devices. Have no system access keyboard or mouse.

  Separated from this thread.

  It is a question.  I have a Windows 7 laptop.  It has three USB ports.  They always worked perfectly.  Today, one of them stopped: Port_ #0001.Hub_ #0002

  A sign of error says: "unrecognized usb device".  Troubleshooting, said that there no problem but under properties of the device, he says that Windows has turned off because it has detected a problem (Code 43).  I tried to plug in several things: camera, various readers flash, mouse, etc. They all used to work properly until today.  Now, it's just a dead port.

  Hi Seiberte,

  Thanks for posting the request in Microsoft Community Forums. I appreciate all the steps you tried to solve the problem.

  What is the brand and model of the computer?

  A device driver has notified the operating system that the device failed. This situation can occur if the peripheral equipment fails or if the device driver fails.

  To resolve this issue, follow these steps.

  1. To open Device Manager, click Start, click files, and research programsand type Device Manager. A list of the available items will appear above the search box; Click on Device Manager. Device Manager opens with the name of your computer to the top and a list of the devices installed on your computer under the name of your computer.
  2. Locate the device in the list of devices, right-click on the device and then click Uninstall. When a warning message that you uninstall a device in your system, click OK. Device Manager uninstall the device.
  3. Right click on the name of your computer in the Device Manager, then click on Search the hardware changes. Device Manager scan your system and reinstall your device automatically.
  4. Right click on the device, and then click Properties. The general of the device, in the State of the device Properties dialog box tab, you should see the message this device does not work correctly.

  If the steps above do not solve problems with the device and the device is an external drive, such as an external hard drive or USB flash drive, use the icon of the taskbar to safely eject the device, and then disconnect the device from the computer. For devices that use AC power, unplug the unit from the wall outlet or the power strip, wait 30 seconds and then plug it in again. Turn on the switch of the device and then plug it into your computer. If the system includes a driver diskette, ensure that you have at hand to install device drivers; otherwise, Windows should automatically locate the appropriate drivers and install them.

  Referred to article:
  
  Code 43: Windows has stopped this device because it has reported problems
  http://TechNet.Microsoft.com/en-us/library/cc725873(v=WS.10).aspx

  For more information, see these articles.

  Error codes in the Device Manager in Windows

  http://support.Microsoft.com/kb/310123/en-us

  Hope this information helps. Response with status so that we can help you.

• How to export my photos and videos from Windows gallery to a removable USB device

  I want to copy or export my photos and videos from windows live gallery to a removable USB device. I am computer illiterate, so please dumb to step by step. Thank you!

  Click the Start button and click computer.

  Everything you put in your machine will be listed as a removable disk or appointed by the device,

  You can click with the right button on this list and select Paste.

  

  Click the Start button and click on the images.

  Top right, rearrange, click on the small arrow and click folder.

  It is best to copy the files under index of the files and the device will hold more data.

  

  Select one of the listed folders, and then hold down the CTRL key and press A,.

  This will select all on the page your,.

  Right click on one of the folders that is highlighted,

  Click on copy.

  Return to the screen of the computer and right click on the removable disk and select Paste.

  After the paste operation is complete,

  Right click on the device again and select eject.

  A safe to remove the device popup will appear and you can remove the device.

  If you want you can use window Photo Gallery,

  Just right click on the pictures and videos that lists all the and select copy.

  Ignore select it without arrow subfolders, that he belongs to another question.

  

• Windows 8 randomly disconnecting from USB devices

  At seemingly random times, Windows 8 disconnects USB devices. I have a total of three usb devices connected:
  -Wifi (TL-WN722N) card
  -Mouse Microsoft WMO1.1
  -Microsoft Digital Media Keyboard 1. 0a

  I tried to play with all sorts of settings in the BIOS, disable USB3.0, turn on USB broadband or fullspeed, etc, but nothing makes a change. This problem does not occur in Windows XP or Windows 7. As far as I can tell (I may be wrong) the first machine to cut is the Wifi card, and others would follow. When it arrives, unplug the wifi card and the keyboard, the mouse sometimes does not work. The card wifi for Win8 drivers are still in beta, but I haven't read anyone else facing this problem. Is there a kind of function where he updates the USB devices that could be the cause (and if yes can be disabled) Windows 8?

  My specs:
  -Motherboard ASUS M4A89GTD
  -SeaSonic S12II 520W Bronze 520
  -AMD Phenom II 965 @3. 4 ghz (not overclocked or changed in any way, 4 cores enabled)
  -4 GB of DDR3 ram
  -OCZ Vertex 4 128 GB SSD
  -ATI HD 5700
  -Card audio Xfi

  I determined what the problem is. The disconnection occurs only when network activity high, like when I download. It seems that the wifi card drivers are at fault.

• Update for Windows Vista can not stuck at 0% and keeps restarting

  I have a Dell laptop running Windows Vista. It keeps up-to-date and then restart. The screen is stuck at 1 of 1 update but says 0% completed. It restarts often but once it restarts, it goes back to the screen saying 1 1 0% complete. I was able retrieve the log in once and get my screen with my icons, but then it restarts again. Help, please! Don't know what to try!

  Hello

  Apologize for the delay in response. To resolve this problem, see the following article:

  http://support.Microsoft.com/kb/2700567

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  I hope this helps. Back to us for assistance.

• Windows Vista can not close properly

  Hello

  Every time when I shut down my computer, I click the close button and let alone. However, when I go back to the computer after a certain time, it is always on. He said shutting down and there is no way I can turn off except in order to cut the current that is not recommended. Can someone help me please?

  Thank you.

  Wen Xin

  Hello

   
   
  1. Since when are you facing this problem?
  2. you remember any changes made to the computer before the show?
   
  Method 1:
  
  Step 1:
   
  I suggest you to search for the problem in safe mode and see if it works. See the following link for more help.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 2:
  If the problem does not persist in safe mode, and then try to perform the clean boot on the computer and check if it helps.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
   
  http://support.Microsoft.com/kb/929135
    
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
   
   
  Method 2:
   
  I also suggest you refer to the below mentioned link and check if it can help solve the problem.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
   
   
  I hope this helps.
   

• Windows Vista - Mail - group management

  When I delete a contact that is in a group, the group will no longer appear in the To: a new message when I right click on the group name and select Action > Send Mail. The only solution I've found is: delete the Group and recreate the entire group, one contact at a time. It is a very painful process. My 4 groups contains +/-50 contacts and that, since all contacts are members of our association of Senior golfers, destruction produce often - dead, move to Florida, could not Arthroplasty of the knee, Alzheimer's, etc. What can I do to eliminate it this problem?

  Hello

  Thanks for the reply.

  Rather than delete the contact from the group to remove the contact from here:

  1. Open Windows Contacts by clicking on the button start , clicking all programs, and then clicking Windows Contacts.

  2. Right-click the contact you want to delete and then click on remove.

  See this link for more information:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-delete-contacts

  It will be useful.

• Windows (Vista) can not start because the following file is missing or corrupt: &#60; root windows &#62; \system32\ntoskrnl.exe

  When I start windows, the message that I get a black screen is Windows (Vista) cannot start because the file is missing or corrupt: \system32\ntoskrnl.exe. Please reinstall a copy of the above file.

  I tried to launch a system of diagnosis without a disk and everything going on. I then tried running windows in safe mode and it won't allow me. That's when I switched to an installation disc supplied with the system. I tried to recover the system from there, but it would not go beyond the option of choosing an operating system. Once I got to that screen, there was NO operating system choose.

  I tried to restore my computer and there is no restore point.

  I renounced restore my computer and thought I'll all start over and install windows vista all over again. This was not the case either. I followed these steps:

  1. Turn on your computer and insert the CD or the DVD of Windows Vista.

  2. Install Windows page, follow all of the instructions that appear, and then clickInstall now.

  3. On the Get updated important for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. On the Type your product key for activation page, we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. On the Please read the license terms page, if you agree to the terms of the license, clickI accepts the terms of the license.

  6. Follow the instructions on each page. On the type of installation do you want? page, clickCustom.

  7. On the place where you want to install Windows? page, select the partition where you want to install.

  8. Click next to begin the installation. You can see a compatibility report.

  and then had this error that says;

  windows doesn't have can create a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0x80004005.

  Now I am stuck and don't know what to do.

  Someone at - it solutions for me. Help, please.

  Hello

  1. on which the drive was initially installed OS?
  2. What partition you selected to install Windows?

  You can try to perform a startup repair by using the Vista installation disc.

  Check out these links for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions  

  How can I fix a startup (startup)?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem 

  What to do if Windows does not start correctly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly 

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista 

  If nothing helps, so please get in touch with the system manufacturer for assistance because it may be a hardware problem.

  Kind regards
  Afzal Taher - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I lost my DVD backup of Windows vista, can I download it?

  I lost my DVD of windows vista backup, and I need. Can I use the product key to download? and whence?
  Thank you

  Hello

  There is no Windows Vista downloads available from Microsoft.

  Here are the different ways to reinstall Vista.

  Contact your computer manufacturer and ask them to send a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And there may be a recovery disk to reinstall Partition Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup.

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

• I have Windows Vista, can not connect, is the file 'another user '.

  Hi, I have Windows Vista Ultimate Edition.

  my computer restarted somehow while I was with her and now the only way I can connect is a folder named "other users". It asks me a username and password but I don't know what it will be. How can I solve this problem?

  Hello

  Try the methods here, but not exactly the same question that they should help to correct yours.

  Your files must be accessible by any ADMIN account in C:\Users if necessary to migrate
  to another account.

  -----------------------------------------------------------------------------------------------------------------

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.